Satellite C660 - Updata BIOS failed

After bios updata my satellite c660 starts do not and receive short message beep one long beep and 2 beep
the screen is black
How do I reinstal of the bios in this State
Thanks for the reply

I'm afraid that the BIOS is screwed now. I don't know what BIOS and how you installed, but something is wrong.

I don't know what you can do now, but check this thread - please https://forum.toshiba.eu/showthread.php?54395

Following the instructions here, maybe you'll be able to fix the BIOS.

Tags: Toshiba

Similar Questions

  • Satellite C660 - update BIOS stops on: project ID check failed

    Update 1.4 stops on: project ID check failed. I have the Satellite C660, BIOS 1.0 version.

    Thahx for help.

    Can you post more information please?

    What model of laptop you have exactly (C6660-xxx)?
    Are you using the original operating system preinstalled that you got with your laptop?

  • Re: Satellite C660-119 - BIOS fail

    Hello.

    We had trouble with our battery so tried everything to also update the BIOS.
    The laptop had no anyway as updated bios n since 2012.

    So went to Toshiba downloaded the right one. Arrived at programming block 17 and then nothing the froze.fan system remained on. It's on during some time so had to pull the plug before it overheated.

    So obviously tried to pull up again. White screen. Lights fine. DVD drives work towers fans. And a beep when it detects RAM. Tried various combinations without success. The so-called support of tosh.

    They cited 187 if it takes reflash and 275 to replace the motherboard.
    Now don't not truism paying I'd rather buy an a Lil nee

    Basically, as everyone has ideas how to do it yourself before I go on it

    I don t think you will be able to fix it but check
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=54395

  • Satellite P200 - updated BIOS fail to step 3

    Then I thought, I have to keep my computer up to date. So I tried to update the BIOS. BIOS update remained stuck for 3 hours at some stage 3. The computer does not restart now, not even a configuration screen. DEAD

    I read somewhere that you can make a USB bootable flash BIOS recovery. Then use some combination of keys that is, Fn or Fn and B W (don't remember). Can someone give me a step by step guide where to download the software, right to the recovery of my BIOS and the machine?

    I don't have to pay fees to have my PC works again as it was working perfectly before this upgrade attempt. I have nothing wrong.

    Thank you
    spiralvista

    I have ocso4m pspb6a model (model AU)

    Hi spiralvista,

    > I read somewhere that you can make a USB bootable flash BIOS recovery
    Yes, I have read on these discussions here in the forum but it doesn t always work and there is no official support for this procedure. Everything you do with these BIOS recovery tools arrive at your own risk and in the worst cases you could destroy the whole ROM module.

    Best option would contact an authorized service provider because the guy may have professional tools to reflash the ROM module where the BIOS is stored. Then you should get in touch with the guy and ask for help. They can also tell you how much it will cost.

    I'm sorry that I can't give another t you not answer but here it s a user forum to only where you can talk with normal people like you and me no one of Toshiba here ;)

  • Satellite A200 - updated BIOS fail

    I made the big mistake. I tried to install the update of BIOS for my A-200 SAT. Everything went well but after blocking switch off PC unbootable.
    If I start it manually led power lights up flesh hard drive some time, and that's it.

    I got this update with toshiba TEMPRO with Toshiba. I need some advice

    Which is really bad, but in this case you can t whatever it is.

    You should go to a local ASP. Maybe they can the recovery BIOS and in the worst cases, the mainbaord must be exchanged.
    On the Toshiba site, you can search for an authorized service provider.

  • Satellite C660-13R - BIOS update problem

    Hi all

    I was updating the BIOS on TOSHIBA SATELLITE C660-13R of 64-bit windows 7. Downloaded driver toshiba web. To halfway the portable installation hangs. I left it for 40 minutes to run, but he did not return to the normal state. As the motherboard fan began to move at high speed, I decided to take out the battery. Result when I power my laptop back I 1 beep from the motherboard and a black screen.

    Can someone help me please?

    Of course, the BIOS update procedure has not. Something was wrong during the update process and it seems that the EMRPOM module was not properly flashed.
    This is the reason why the laptop is no longer.

    Possible solution?
    Well, if EMPROM isn t damage, it should be possible to re-flashing the BIOS module once more, using special version of BIOS and crisis disk BIOS.
    Usually the authorized Toshiba maintainer in your country should be able to re-flash of the module using this disc of crisis.

    I also read in this forum that some people managed to re-flash EPROM module using some 3rd party crisis disk found somewhere in the internet but it still does not
    The ASP will therefore probably be your last resort

    However, to use the forums advanced search option to find related discussions on the crisis disk BIOS could be interesting for you

  • Satellite A500 - update BIOS with dead battery

    Hi all

    I have a Satellite A500 (PSAR3E) laptop and I need to update the BIOS to the latest version.
    Unfortunately, my battery died completely, and I have no chance to get a working one.

    I was trying to update the bios all day, but no matter how I try (even created a boot back drive and took command line phlash16, /forceit and so on) it keeps telling me that he needs at least 10% charged battery present.

    How can this problem be solved?

    > If I remove the battery, engine update fails, say there is no battery present, if I fix the battery, then update will fail saying the battery must be at least 10% - but he died, this percentage is 0.
    And you write about original Win version that you have downloaded from the Toshiba BIOS download page and started in Windows?

    To be honest is unclear to me that there is a trick to avoid this situation.
    Maybe something stupid, but now, do you really need to install the update to the BIOS?
    Is there a problem with your machine?

  • Satellite C660-1TT - BIOS problems

    Hi all...

    I sat and would update the bios for my Toshiba Satellite C660-1TT (PSC1QE-01D006N5)

    Sloopy as I was, I left the computer to get a coffee, * obviously one of my children was there * and press a few buttons. This resulted in the computer 'frozen' after a while I was forced to turn off.

    Now change back the time and date each time I start the computer, and I can´t get the wifi to work.
    I tried to reinstall the bios again but then get the message that I already have the same or more recent bios and installation is complete.

    Someone who can tell if I wrong somehow the computer into thinking it is a newer version or the mabye bring in the former and then update?

    Grateful for any help! Robert

    (excuse my bad English)

    Hello

    To my knowledge it is not possible to downgrade the BIOS in windows mode, because you will always have a notification, this new version is already installed.
    To my knowledge the ASP technician Toshiba may downgrade the BIOS but only using the traditional version of BIOS (BACK).

    But I recommend to test this workaround solution.
    Shut down the laptop. Remove the battery and unplug the AC adapter.
    Now let the laptop disconnected for a longer period of time, I think about 3-4 hours
    Then plug the battery adapter and ac and access the BIOS by pressing F2 to turn on/off the unit.
    Here, you must set the default BIOS (F9) and save the changes.
    Now, start Notepad and check how it would work.

    Usually, the date and time resets because the CMOS battery is empty. But I can't imagine that this could be a problem here, however, you can reload the CMOS battery running the laptop on area for 18 to 20 hours. During this time the laptop must be ONE.

    Check this box

  • Satellite T135 - update BIOS 2.70 won't be finished

    I have a Satellite T135 Win7 running with an original BIOS that I'm moving to 2.70. I ran all the other software updates in Service Station (2.1.51) with no problems. but the BIOS downloads 2.7, initiates and cautions that I'll need to reboot (I select Yes to execute) and receive notice of popup on the electrical problem (defective DC) which corrects this BIOS, then nothing. It just stops.

    I disabled my firewall windows antivirus, but the update is still unable to fill. I downloaded the file directly from Toshiba (outside the Service Station) and run the file and exactly the same thing happens.
    The event viewer shows all the related entries.

    Anyone has an idea on how to get the updated BIOS up-to-date?

    Hi mwarwick,

    Did you install any new version of package of added value of the Web from Toshiba site? This program is necessary if you want to update the BIOS to check if you have installed the latest version.

    In addition I recommend you load the default settings in the BIOS before doing the update. Then, go into the BIOS, press F9 to load the default values, save & exit it.

    Can update you the BIOS now?

  • Satellite C660 - update the HARD drive firmware question

    I have satellite C660 with hard drive: MK3275GSX, firmware: v.GT001M. On another Web site support site I found the update of firmware for v.GT002D ([link: http://www.dell.com/support/drivers/mw/en/mwdhs1/DriverDetails/Product/latitude-e6330?driverId=FP21C&fileId=3126089791&osCode=W732 & languageCode = en]).

    Can I use this update?

    Question may be stupid, but why firmware update HARD drive? Over the past 10 years I ve ever installed an update of the HARD drive.

    If Toshiba support doesn t offer an official update on the download page, I think that you don t need.

  • Satellite C660 - update Intel HD graphics card problem

    Hello

    Sorry for my level of English, I'm French

    I have a problem without a solution with my Satellite C660 (for the moment, I hope!) I downloaded the software google sketchup 8, dedicated to the development of architecture, but it does not work, I still got a bug message advising that it is necessary to update the graphics card drivers (according to google support it seems that OPENGL functions must be implemented in the drivers of my laptop)

    So I downloaded the latest drivers available for the configuration I have (Intel HD graphics for pentium, 64-bit windows 7).

    the link (french site, that Intel is not currently available, it is a document of .exe)

    http://www.Touslesdrivers.com/php/Constructeurs/TELECHARGEMENT.php?v_code=37057&v_langue=FR

    I tried to update manually driver graphics card with Device Manager menu (graphics card > update drivers button > file.exe manual selection), but in the end, there is no update, I did that a very small message advising that windows has determined that the pilots are already updated.

    In fact there is no change on the drivers (always the same date of the 2010-07-28 drivers in the properties of the graphics card) and sketchup is still unemployed

    Any suggestions?

    Thanks in advance

    Hello

    What C660-xxx you have exactly?

    If you have an Intel graphics card, you must download the driver directly on the Intel site.
    There you should find the last version of driver

  • Satellite L750D - update BIOS 2.1 and its problem

    Hello

    I have little problem. I was downloaded from your website 2.1 BIOS for Toshiba Satellite L750D (PSK32E).

    I have been updating BIOS 2.1 and start the problem with the sound. When I start the game, music or else minutes 2 first sound plays correctly but then it stops without reason. No noise at all. I've been reinstalled op system but the problem is still there.

    Sound works for 2 minutes only then is completely off. Each application to start with sound plays 2 minutes and stop all silent is. I did a probe on my laptop the mother she s a computer portable twin. I have updated bios same problem 2 minutes and then no sound. My OS is win 8 64 pro my laptop mother is with win 7 x 64 premium.

    Two BIOS updated ver 2.1 on L750D and the problem is the same. Please fix the BIOS.

    The BIOS seems to be very old. I was released nearly 1.5 years ago, so to be honest, I doubt that his and BIOS problem.

    I had the similar problem with my other laptop equipped with a Realtek sound card.
    The sound appeared after connection and remove the headphone jack
    But I could solve this latest installation updated audio driver the Realtek driver page.

    But it seems that your Satellite does not support Realtek audio chip but the Conexant audio chip.
    Therefore, the solution could not be useful for you.

    However, I think that you need to update the audio driver. I recommend you google for driver Conexant SmartAudio HD and test the latest version of the driver available.
    On the internet, I find the Conexant SmartAudio HD driver version 8.65.9.51 for Win 7 / 8 Win / Win 8.1
    Not quite sure if this is the latest version, but you can test it.

    To manually update your driver:

    1. go into the Device Manager (right click on my computer, choose manage and then find Device Manager in the left panel)
    2. right click on the device you want to update and choose Update driver software
    3. choose Select the location of the new driver manually and navigate to the folder where you downloaded the driver

  • PC Diagnostic in my Satellite C660 tool shows FAIL to HARD drive

    When I run the PC Diagnostic tool in my Satellite C660 it shows the result as "FAILURE" for the hard drive.
    Is there a problem with the hard drive?

    Post edited by: Sammy007

    > When I start the PC Diagnostic tool in my satellite c660 it shows the result as "FAILURE" for the hard drive. Is there a problem with the hard drive?

    He said nothing, I mean diagnostic tool Pc can can show result falsely and the drive works very well himself. In any case, backup all data in case of failure. You can also download the 3rd party program to test the State of the hard drive. (such as hard drive Inspector)

  • Satellite A300 - update BIOS 1.70 - WIN

    Update BIOS 1, 70-VICTORY-28/04/09
    Once again the same thing?...

    PSAG8E A300

    Hello!

    Can you please explain what you want?
    Once again the same thing? What you mean?

    Good bye

  • Satellite L350 updated Bios to pad 2.1 and lost

    Hello

    As indicated above for the update Bios to 2.1 later I lost the functionality of numeric keypad, not the right side as if it were a good keyboard.
    The above keys work IE delete scroll etc.

    The numlock light does not illuminate, but it does if I activate the keys on the stretch main qwerrty.
    Is their any way to reload the bios it won't let me because I have the latest or downgrade may not be like that until anothrer update.

    By the wy am Windows 7 any info would be greatly apreciated thanks

    Hello

    Normally you press Numlock on the keyboard to enable it.
    Check this box!

    If it s not working do not you should load the default settings in the BIOS. Maybe it works.

    Last but not least just be sure it s not a hardware problem, can test you it with the factory settings?

Maybe you are looking for

  • HP Probook s 4430: protect tools

    HP support, I have recently updated HP Probook 4430 s Win8.1 / 64-bit.   I could not find driver HP protect tool and access key in the list of drivers.   Where can I find them if...

  • system - failure - windows update status

    Hello to all of you who made everthing possible for this forum are available for all needing help. My question as iam having right now is to update windows 1. conexant-audio-conexant-high definition audio2. installation failed3 conexant audio softwar

  • BlackBerry Q10 Q10 homescreen

    Is it possible that I can have a simple home screen with a nice wallpaper instead of the tabs in the menu on the screen. I don't like them. Like my plain homescreen rather

  • Blu - Ray on Windows Media Player movies

    I bought a HP Pavilion Elite HPE computer refurbished last July that included a blu-ray/dvd/cd player. I have windows 7 and have never had any problems, watch movies or play CDs until yesterday, May 19, 2012. I just bought a blu - ray movie after wor

  • Activate the revelation LR module

    My plan has been disabled by the problems of the credit card. The LR is already installed and running. Today, I made a new payment and account information are correct, but revelation module does not work. LR said that I need to renew my account (alre