Satellite C660 - USB keys are not mounted

I have a * Satellite C660 with Windows 7 64 bit *. When I conect a USB stick (2 GB LG or other), Windows install the new USB, but after a few seconds, the USB is disassemble and assemble and disassemble some indefinitely.

With my old * Toshiba Satellite M50, Windows XP * both sticks work very well.

Hi mkobets,

Probably something wrong with USB ports or driver chipset so the glue work with your old Toshiba laptop USB

Means the simplest would update the chipset in my view driver that you can download here:
http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp

Tags: Toshiba

Similar Questions

  • Dell: inspiron 1525 not boot from a USB stick, USB key are not not in the start option.

    Hi all

    I bought this dell laptop inspiron 1525 in the year 2008 with mentioned configuration:

    Core 2 duo processor

    1 GB OF RAM

    Due to some problems in my windows vista, I decided to install a new windows vista in my laptop. I run the dell support live cd at the start of my laptop and created the partitions on my system. But while the new installation OS on the cd i found that optical drive of my system does not work very well. so, I decided to install the new OS of USB. I went to the BIOS and selected the USB key in the boot sequence. but when I tried to install the new OS while pressing the F12 key, USB key is not listed in the start option.

    could someone help me to install the new OS in my machine? It is very urgent that my machine is down for 1 week.

    Please try attached BIOS changes screenshot than everything be useful to me.

    Thank you

    Gurpreet

    Hi Gurpreet,

    Thank you for your response.

    My apologies if I seem repetitive, but when you go to the Option of boot sequence in the system configuration screen, do you think that the USB storage device listed? And do you see a number in front of it?

    Go to the option for embedded devices and check if the USB ports are enabled or disabled. If disabled, change the option and enable the USB Ports.

    If this step does not help, go to the Maintenance option in the system configuration screen and press enter on 'Load Defaults'. On the side right, highlight 'Continue' in green, press Enter and then save & exit.

    Please keep us informed of the results.

    Thank you and best regards,
    Babita S
    #iworkforDell

    For easy access to the drivers, manuals and updates, please visit our Support Site .

  • Satellite C660 - function keys do not work correctly

    I have a strange problem with the help of function keys. When I turn on the laptop the functions work well. However, after 30 seconds of standing on the desk, they stop. The only buttons fuction that work after that are for the volume (up and down). The brightness, the mute button, they all stop working.

    I have no idea what is the reason for this and I'll be happy to have your help.

    MODEL NAME: Toshiba Satellite C660-1MU
    PART NO.: PSC1SE-00600283
    OS: Windows 8.1

    As far as I know, function keys are controlled by the driver of Toshiba system and key function Toshiba utility and they must be active in the background (to start).
    I checked the Toshiba download page, and as I can see, your laptop is not yet supported for Win8.1. What drivers you have installed?

    Anyway, you can try to reinstall them.

  • Some files in my USB SanDisk 16 GB USB key are not detected and when I connect to another PC, all files are detected

    Original title: some files in my USB are not detected and the rest of the files show find when I connect to my pc, when I connect to another pc the files seems to find.

    Hello world

    I have a SanDisk USB 16 G with important files, when I connect to my pc windows 7, some files are discovered, I am able to read other files show as empty files and my pc don't its not able to open them.

    When I connect the same USB for my lap top with windows 8 all the files where to find and I can open with a problem.

    Can some body please help me solve this problem?

    Hi Martin,

    This problem can be caused if the program for the particular file could not be installed on your computer.

    1. What is the file format or the extension of the files that you do not read or recognize in Windows 7?

    2. what exactly happens when you try to open empty files?

    3. have you made any recent hardware or exchange of software on your computer before the show?

    You need to check the files that are not open in Windows 7 and trying to install the software for files that are not opening and control.

    Let us know the status of the issue. If you need help, please after return. We will be happy to help you.

  • USB key are not displayed

    My VM is running Windows7 and none of my USB key appear. How can I make them appear in Windows Explorer?

    First of all, make sure that your host can see, follow these steps in your VM Workstation:

    In the attached photo, this is an example of my external hard drive, all you have to do is click on Connect (disconnect the host) and you should be able to access it from inside your virtual machine. In case there is problem and this can be done, you can still use shared between the host and the VM folders

  • Satellite A60 - USB ports are not really high speed

    Hello
    It seems to me that the SATELLITE A60-197ITA USB ports aren't really high speed. They are very slow!
    Some diagnose program says that the BIOS supports USB Legacy...

    What is the problem?
    What can I do to have the best performance?

    Hello

    I put t know what external device you use, but in my view it is also the external device power function.

    Legacy support can be enabled in the HW of Toshiba installation tool. You can find it under control panel.

    Good bye

  • Satellite C660 - keyboard keys do not work

    Hey all,.

    I have a Toshiba C660 PSC0QE, and some letters have recently stopped working. Well I think it happened when my 1 year child, smacked the keyboard! :-@
    Its just keys at random but the following don't work;
    e, t, u, i, o, z, x, c, v, m, SPACEBAR, move, BACKSPACE, ctrl, 2,4,8,9 and prob some other key.

    Is this a common fault on these models?
    An update of the bios could be remedied? -How do you do this?
    Or do I need a new keyboard?

    Thank you

    (this helps the keyboard screen is terrible)

    p.s. I couldn't find an answer on the forum

    Hello

    I don t think it is matter of BIOS.
    Connect an external USB keyboard and check how it works.
    The same buttons work correctly using external USB keyboard?
    If so, this problem is related to the internal keyboard so the BIOS update is useless in this case, you will need to replace the keyboard in order to solve this problem.

  • Satellite P300D - multimedia keys are not light up

    Hello

    I have a series of Satellite P300d and I love it but the word Satellite and multimedia buttons lights no more, I I've read the book and looked in the settings confusing incase she is somehow got turned off... Can anyone help? Is this a bulb or something?

    Amanda

    Hello Amanda

    Remove pre-installed Package added value (Control Panel > programs and features), restart your laptop, and after doing this download and install again.
    The correct version, you will find under http://eu.computers.toshiba-europe.com > support & downloads.

  • Satellite L50-B-127 - some keys are not working and touchpad blocks constantly

    Before leave here an apology because I'm Portuguese and my English level is very low.

    My computer is a Toshiba Satellite L50 B 127

    Lately, I noticed some anomalies which appeared me on my computer (which should take about a year). When I speak of anomalies refer to the keys you use rarely, and at this stage do not work (example: arrow left, Z,...)
    Not to mention that I noticed that my touchpad is constantly blocking, that is to say after the buttons to work, the cursor does not move, being sometimes more than 20 seconds to wait for the cursor to return to normal.

    If anyone has had this problem or knows the cause and the solution? Recognizing a response as soon as possible

    Hello everyone, I'm here to post my problem that has caused me a lot of problems and troubles and especially apologize because that throughout this text should meet several errors since my English level is low

    My computer is a toshiba satellite L50 B 127 and has a little more than a year of use

    Lately, I found some anomalies in my computer including some keys from one day to the other crashed, these keys are not widely used (arrow to the left, z, dash). In addition, my touchpad has been constantly block of minutes in minutes, even if the buttons on the touchpad still work, the truth is that the block cursor for a few seconds and then comes back to work as if nothing had happened. In 10 minutes, however this situation occurred four times

    I would be grateful if someone knew the reason why this happens or even the solution to answer me as soon as possible

  • Tecra A4 - USB keys do not appear in 'my computer '.

    I recently had to restore my TECRA A4 system after a disaster, since then, usb keys do not appear in 'my computer' and aren't available to use? However, they are listed in the device under usb devices Manager and hard drives?

    I updated the Bios and looked for the updated USB drivers, but nothing found?

    Hello

    Maybe stupid thing, but try it please follow: disconnect your laptop computer, adapter sector and battery and leave about 60 minutes. After only 60 minutes connect AC adapter / CC, start your laptop and try to use the USB.

    Please let me know what happens after that.

    By the way: check this http://support.microsoft.com/default.aspx?scid=kb;en-us;817900 document

  • Satellite A300 - easy (key) does not not after SP2 update

    Satellite A300 easy (key) does not...
    I have recently upgraded my Vista SP1 to SP2 (do not know if this is the problem, but I'm pretty sure that's not)

    Yesterday, I discovered that my easy keys no longer work. Lights are out, when I press the keys, the light comes on and goes off again as they do normally, but no reaction on my screen (can not turn on any light without restarting my computer and select turned ON manually cannot transform media of windows opened by the touch and play the key do not work).

    Is it supposed to be a driver or something for this?

    Sorry for the bad English...

    Hello!

    A few days ago, I had the same problem on my laptop Qosmio. Lighting keys stopped working after installing some updates and the 3rd application programs the keys no longer works and also the lighting.
    At the end of the story, I had to reinstall Windows :(

    In any case, now, you should try to reinstall the Toshiba value added Package. He controls these buttons that you want to say and you can find it on the Toshiba site:
    http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

    Before installing you need to remove the old version first, restart the computer, clean up your Windows with CCleaner for example, restart again and then install the new VAP.

    Good bye

  • USB key is not considered to HP PAVILION CORE I5 and MS 7613

    Hello

    I just got my new HP desktop HP PAVILION CORE I5 motherboard MS 7613 and im trying to install windows 7 without success, because in the BIOS the usb memory key does not START options. Don't see these settings in the bios to boot:

    Floppy boot priority group - not installed

    Group - HP DVD-RAM GH60L CD-Rom boot priority

    Group ST3100052AS HARD drive boot priority

    Network boot priority group - not installed

    More than that, I tried testing with two different usb sticks in different USB ports and the system could not start when trying to install windows 7. The two sticks were properly formatted and I have done some testing old NetBook of the mine and windows 7 have been successfully installed from two flash drives.

    One of my usb stick http://www.amazon.co.uk/PNY-Transformer-Attache-Flash-Drive/dp/B009J0HM94

    Second removable disk is named pro usb drive

    Also two usb keys are seen in the bios on the USB PORTS SETTINGS

    Any direction to help me to windows on my machine is very appreciated.

    Thank you, Bobby

    Check in the BIOS for Secure Boot settting_it must be disabled before the CMU machine can boot from any source in addition to the hard drive. Also activate the Boot legacy. Save & Exit.

    When starting with the USB key, press ESC immediately after turning on. This should bring up the boot F9 option where you use the arrow key to move to the low to highlight/select USB Flash. Press on enter.

  • USB keys do not work in my VISTA PC, but working in the XP computer.

    My PC is only a few months and underwarranty. VISTA is OEM original and authentic. All updates and installed SP2.

    But I have several problems with VISTA.

    One of them is the following:-

    USB keys do not work in this PC. Initially, they are recognized, but as soon as I start the data transfer it stops and does not recognize the keys more. Same USB keys work correctly on other XP computers.

    An external hard drive works perfectly on the same USB port. If the port is fine.

    Hello PG_eu,

    First of all if still under warranty, contact the manufacturer to execute tests for your USB slots. Have you tried to see if other devices work on the USB plug? The manufacturer of your may be able to replace your computer if needed.

    Then, I'd go for the Device Manager to see if you have errors. Go to Device Manager and see if you have a yellow fringe! showing that there are errors with your USB devices. Open the Device Manager in Windows Vista via the management utility of the computer, the Control Panel, or from the command prompt by typing in devmgmt.msc.

    You can go to the different tabs and see if the devices work properly, should be cancelled or update your drivers.
    You can also go into the event viewer and see if you have errors on your hardware devices.

    I hope this helps.

    Sincerely,

    Marilyn
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think

  • I have an imac 27 "... on power there is no signal to startap, usb ports are not working and its deadlock with the logo of the Apple with the circle of rotation... Help, please

    I have an imac 27 "... on power there is no signal to startap, usb ports are not working and its deadlock with the logo of the Apple with the circle of rotation... Help, please

    Wake the computer to your Apple store or Apple authorized service for the service provider. He probably suffered a hardware failure.

  • Your bootable USB key could not be created

    "Your bootable USB key could not be created.

    Hey guys,.

    I Googled what to do about this error message and all I got was to ensure that the ISO is disassembled. I did, and yet I still get the same exact error message. I'm trying to get Windows 7 Home Premium on a 2012-13 inch Mac Book Pro. I also use a flashdrive 16 GB for the ISO image. Any ideas on how to solve this problem?

    Please read: create an ISO image for the Boot Camp Windows installation media.

Maybe you are looking for

  • HP Pavilion Notebook pc: camera turns is not on

    I can't understand how to turn on my camera.  Try to make video calls on Google Hangouts and while the audio works, video doesn't work.  I can see the appellant, but she can't see me.

  • Have HP Photosmart c5180 all-in-One

    Used HP recommended download to install. Printer works fine, but can not scan when I run the Scan software, get message "device not found". When I check "Devices and printers" of the start icon, I find printer, but not to scan. Help? Win 7 (64)

  • product key for windows xp sp2 pro!

    I lost my serial code for my windows xp sp2 pro Disc... and I really need bad.do anyone know what I can do to get it back?

  • E3000 Advanced routing

    I spent hours with support only to discover that the company will not support routing advanced on the E3000 even if I take my servers out of the equation. I have ATT Uverse VDSL and a public 5 IP block. I have 3 Web server behind the e3000 and I want

  • Why my windows Vista processer became the classic windows processor?

    My computer is 64-bit of Windows Vista. When using my computer, it changed randomly one day of vista taskbar and the classic model for the old. I tried to change the settings of vista, but even in doing so, it is classic. An example of what is happen