Satellite C660D - 10 d will not start unless I have remove the battery and reinsert

Present a strange problem that I can't solve.

Brand new, open all laptop worked perfectly.

Turned off normally and left it overnight with the power supply connected.

Next day morning pushed the button market / stop the portable green power on but light did not start.

Press and hold the button for 10 seconds does nothing.

I remove the battery for 10 seconds and put again and then you press the power button and you get a full boot up normally.

Everything on it works perfectly, you can restart the laptop without problem, you can even turn off then turn on half an hour later with no problems.

This problem occurs only when it is off and that the power is plugged in for several hours.

Back to toshiba warranty, I've attached a note explaining the problem and even returned what he locked up so he wouldn't turn until they removed the battery.

10 days later they returned it saying that the intensively checked the laptop and found no abnormalities.

I plugged the battery and pressed the power button / stop and the same question once again outside of this period, that the fan runs for 2 seconds then turns off, I removed and re inserted the battery about 15 times before it started normally.

Last night went out as normal and this morning the question of the standard of don't turn is not on at all.

Just to clarify him when the power supply is left connected overnight or for several hours so that the system is power off the laptop does not start, the Green led lights, no fans spin, no sign of life. One way to start is to remove the battery for 10 seconds.

I've been on toshiba again and said that if I return it a second time and they can't find a fault that I would have to pay £80 for it returned. I recorded the fault to prove that they is a fault but they seem not interested in that.

Up to now, the bios has been updated, reinstalled windows, I can't replace drive HARD or RAM that the warranty will be voided. However issue and im 90% that this is a motherboard.

All the ideas that I'm completely stuck on this one!

Sorry to hear you I have a problem with your laptop.
Problem you have is certainly hardware related issue and it should be solved by Toshiba.
In my opinion you should not spend money for new parts, trying to solve this problem.

Laptop warranty valid and should be set the laptop for free.

Tags: Toshiba

Similar Questions

  • Will not start unless I have use EDIT (F10) BOOT OPTIONS to the start screen

    n order to get my laptop running I have to press F10 at startup, which brings me to a screen that says:

    CHANGE STARTUP OPTIONS
    Edit windows boot options for: windows 7
    path: \windows\system32\winload.exe
    score: 3
    hard drive: 350f350f
    [/ NOEXECUTE = /MININT OPTION]
    ]

    To start, I need to erase the text:
    "/ NOEXECUTE = /MININT OPTION.

    After that, I can start.

    My problem with the trunk is the C:\Windows\system32\drivers\Classpnp.sys file. I know because I tried safe mode, but it hung to this file.
    I also tried system restore and Startup Repair with no luck.
    I tried to use cmd to rename the file in Classpnp.old, but he said he could not find the specified file, when this is clearly where I can see it when I go to the folder (once I start with the hack at the above address startup options)
    I checked in the environmental settings, but the problem isn't here. I also tried sfc/scannow in cmd, but the test came back without error.

    Help, please!

    Try this

    http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  • Videos will not work unless I have keep the cursor, or switch to full screen mode. This does not happen on Internet Explorer.

    I've updated the flash player.

    In past threads, users said that they managed to solve this problem in a variety of different ways, suggesting that there may be multiple causes:

    • Remove unwanted extensions
    • Clean malware
    • Disable hardware acceleration
    • Change to a different drive Flash (developer/debugger version)

    In response to these first two, here is my procedure suggested to track down and cleaning of the bad modules. I know it seems long, but it's not so bad.

    (1) open the Control Panel, uninstall a program. After the loading of the list, click on the column heading "installed on" to group infections, I mean additions by date. This can help the undisclosed items bundle smoker who snuck out with some software, you have agreed to install. Beware of everything that you don't recognize / remember, since malware often uses sounding names important or innocent to discourage you remove. Out as much garbage as possible here.

    (2) open Firefox page modules using either:

    • CTRL + SHIFT + a
    • "3-bar" menu button (or tools) > Add-ons
    • in the Windows "Run" dialog box, type or paste
      firefox.exe "about:addons"

    In the left column, click on Plugins. Set essential and unrecognized plugins 'never enable '.

    In the left column, click Extensions. Then, in case of doubt, disable (or delete, if possible) not recognized and unwanted extensions.

    Often, a link will appear above at least an extension disabled to restart Firefox. You can complete your work on the tab and click one of the links in the last step.

    Any improvement?

    (3) you can search the rest of problems with scanning/cleaning tools listed in our technical support article: Troubleshooting Firefox problems caused by malware. These scanners on request are free and take a long time to run. If they end quickly, especially if they require the payment you have a serious infection. I suggest the specialty forums listed in the article in this case.

    Success?

  • Satellite Pro A60 EN does not start after you have used the recovery CD - isapnp.sys missing or damaged

    Help am stuck with it.

    Necessary to perform a recovery on the laptop and used the recovery CD 2 they seem to work OK. No error during installation, but after that they finished and it restarts didn't get the following message.

    Windows could not start because the following file is missing or corrupt:
    System32\drivers\isapnp.sys

    You can attempt to repair this file... etc but I don't have any original installation CD all have is the recovery for the Toshiba.

    I have a setup of Windows XP for the PC disk, but when I try to run which, but it starts just the configuration. Setup is loading files and after the kernel debugger get error

    "File ntkrnlmp.exe could not be loaded.
    The error code is 4, sometimes it's 7.

    I tried to delete and recreate and formatting partitions, so I can see and I can copy a file to the C: drive

    So any suggestions as to what wrong here

    Thank you very much

    I put t know if this Microsoft Knowledge base article would be useful for you, but you should check it out.

    [You receive a "Windows didn't start because the following file is missing or corrupt: Isapnp.sys" error message at startup | http://support.microsoft.com/kb/315311]

    Microsoft has a solution, and I would like to know if you can solve this problem by following the steps of the solution described in the article.

    Feedback would be much appreciated

  • pages not to load step and videos will not play unless I have shake the mouse, why and how to fix?

    I update to the latest version of firefox, and now I'm having this problem. It was OK before.

    Hey, just to keep you updated - there is now a fix available for firefox 25, to focus on the particular problem of the pages won't load not unless the mouse is moved.

    If you have downgraded to firefox 24 to work around the problem, please go to firefox > options > advanced > update and re - turn on automatic updates. Then go to firefox > help > about firefox that should trigger the update for firefox 25.0.1.
    just in case you need to download the installer for firefox 25.0.1 separately https://www.mozilla.org/firefox/channel/#firefox

  • media will not play dvd - may have removed the dvd decoder

    missing dvd decoder

    The free VLC Media Player may be
    worth a try... it will play anything.

    (FWIW... it's always a good idea to create a system)
    Restore point before installing software or updates)

    VLC Media Player
    http://www.filehippo.com/download_vlc/
    (works on XP/Vista/7)
    (the name of the file to download is: vlc - 2.0.1 - win32.exe)

    Good luck...

  • Computer laptop HP G6 does not illuminate. Have removed the battery and the power cable - nothing happens

    Tried removing battery and turn on with power cable - no luck.  The ONLY light anywhere, that's where the cable plugs.  The unit is only 3 weeks old.  Bought at OfficeMax.

    Hello

    If you are still in the period of time where you can return the machine and get it replaced, it's definitely what I would suggest - you shouldn't be troubleshooting a whole new machine and it sounds like a hardware problem.

    Kind regards

    DP - K

  • MiFi will not work unless that plugged into the computer... Verizon no help at all it explains a vista problem... He used to work, but I think that an update did something to it and now it does not work...

    Remember - this is a public forum so never post private information such as numbers of mail or telephone!

    Ideas: hours on the phone with verizon... nothing is ready to throw the Verizon mifi and go to TMobile... forums looking for answers but not help there... seems a lot of people have this problem... someone at - it help him?

    • You have problems with programs
    • Error messages
    • Recent changes to your computer
    • What you have already tried to solve the problem

    A Beyschau of Annette

    Hello

    Quote: ' MiFi will not work unless plugged in to the computer.

    Where it has been plugged in before?

    If you are using to connect via Wireless, then it might be that your wireless connection has a problem.

    ----------------------------

    Wi - Fi in general.

    These steps and tell us where is the breaking point.

    Check the Device Manager for the wireless card valid entry.

    http://www.ezlan.NET/Win7/net_dm.jpg

    If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

    Check network connections to make sure that you have a network icon/entry wireless connection, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

    http://www.ezlan.NET/Win7/net_connection_tcp.jpg

    ------------------

    The wireless card drivers much also install utility wireless of the seller.

    Make sure that if there are teas from Wireless Utility of seller does not work with the native Windows wireless utility (Service WLAN).

    ----------------

    Make sure you firewall No. preventing / blocks wireless components to join the network.

    Some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible set up the firewall correctly, otherwise totally uninstall and get rid of its remaining processes that permit the own local network traffic flow.

    If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

    party like Hello and NetMagic 3rd network managers can block local traffic too.

    ---------------------------

    Stack TCP/IP work should look like.

    Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

    http://www.ezlan.NET/Win7/status-NIC.jpg

    Description is the data of the card making.

    The physical address is MAC of the card number.

    The xx must be a number between 0 and 255 (all xx even number).

    YY should be between 0 and 255

    ZZ should be between 0 and 255 (zz all the same number.)

    The date of the lease must be valid at the present time.

    * Note 1. IP that starts with 169.xxx.xxx.xxx isn't valid functional IP.

    * Note 2. There could be an IPv6 entries too. However, they are not functional for Internet or LAN traffic. They are necessary for Win 7 homegroup special configuration.

    ---------------------------------------------------

    A message in the small window that says connected wireless doesn't means that you are really a valid functional connection.

    Above everything is OK, you must be able to connect to the router.

    Connection to the router means that you can enter the IP of the router base in an address bar in one go, being able to connect and configure the router menus see.

    If it doesn't connect to the router, journal newspaper from any computer that can connect to the router wirelessly with a wire, disable wireless security, make sure that the wireless SSID broadcast is enabled and try to connect with no. wireless security.

    Enable security wireless after you eat to make a functional connection.

    Jack-MVP Windows Networking. WWW.EZLAN.NET

  • Updated the macbook pro of el capitan and now will not start. Instead, I get the error message "your computer restarted due to a problem". Someone at - it suggestions on how to solve this problem?

    Updated macbook pro today for the latest version of el capitan and now will not start. Instead, I get the error message "your computer restarted due to a problem". Someone at - it suggestions on how to solve this problem?

    It would be helpful to post what the screen says.

    -Try to reset memory NVRAM/PRAM and SMC

    MacIntel: Reset of the controller (SMC) system management

    https://support.Apple.com/en-us/HT201295

    Subject of memory NVRAM and PRAM

    https://support.Apple.com/en-us/HT204063

    -Try to start safe mode

    OS x: what is Safe Boot, Safe Mode?

    https://support.Apple.com/en-us/HT201262

    -Start to recovery and repair the startup disk

    OS X: on OS X Recovery - Apple Support

    https://support.Apple.com/en-us/HT201314

    -If it is repairable reinstall the OSX

    How to reinstall OS X on your Mac - Apple Support

    https://support.Apple.com/en-us/HT204904

    -If you do not have a backup using disk utility to restore the internal drive to an external drive, so that you can try to recover the data.

  • All the ' * .exe ' programs will not start by simply clicking on the shortcut icon.

    All the ' * .exe ' programs will not start by simply clicking on the shortcut icon.  I need a right click and select "Run as Administrator" to get the program to run. By clicking on the left, a box opens, which says "Windows cannot open this file: file iexplore.exe (example)". ""  It then goes on to ask if I want to use the web or select a program from a list of installed programs. Is there a way to get this back to "normal"?

    Hello

    If you need search malware here's my recommendations - they will allow you to
    scrutiny and the withdrawal without ending up with a load of spyware programs running
    resident who can cause as many questions as the malware and may be harder to detect as
    the cause.

    No one program cannot be used to detect and remove any malware. Added that often easy
    to detect malicious software often comes with a much harder to detect and remove the payload. Then
    its best to be thorough than paying the high price later now too. Check with them to one
    extreme overkill point and then run the cleaning only when you are sure that the system is clean.

    It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
    the regular windows when you can.

    TDSSKiller.exe. - Download the desktop - so go ahead and right-click on it - RUN AS ADMIN
    It will display all the infections in the report after you run - if it will not run changed the name of
    TDSSKiller.exe to tdsskiller.com. If she finds something or not does not mean that you should not
    check with the other methods below.
    http://support.Kaspersky.com/viruses/solutions?QID=208280684

    Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
    (If Rootkits run UnHackMe)

    Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

    Malwarebytes - free
    http://www.Malwarebytes.org/products/malwarebytes_free

    SuperAntiSpyware Portable Scanner - free
    http://www.SUPERAntiSpyware.com/portablescanner.HTML?tag=SAS_HOMEPAGE

    Run the malware removal tool from Microsoft

    Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

    You should get this tool and its updates via Windows updates - if necessary, you can
    Download it here.

    Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
    (Then run MRT as shown above.)

    Microsoft Malicious - 32-bit removal tool
    http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

    Microsoft Malicious removal tool - 64 bit
    http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

    also install Prevx to be sure that it is all gone.

    Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

    Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
    security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
    here or use Google to see how to remove.
    http://www.prevx.com/   <-->
    http://info.prevx.com/downloadcsi.asp?prevx=Y  <-->

    Choice of PCmag editor - Prevx-
    http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

    Try the demo version of Hitman Pro:

    Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
    (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
    what you have done (such as antivirus, firewall, etc.).
    http://www.SurfRight.nl/en/hitmanpro

    --------------------------------------------------------

    If necessary here are some free online scanners to help the

    http://www.eset.com/onlinescan/

    -----------------------------------

    Original version is now replaced by the Microsoft Safety Scanner
    http://OneCare.live.com/site/en-us/default.htm

    Microsoft safety scanner
    http://www.Microsoft.com/security/scanner/en-us/default.aspx

    ----------------------------------

    http://www.Kaspersky.com/virusscanner

    Other tests free online
    http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

    --------------------------------------------------------

    After the removal of malicious programs:

    Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
    system files.

    Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
    RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker
    (SFC.exe) program generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    -----------------------------------------------------------------------

    If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

    http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

    ======================================

    If necessary AFTER you are sure that the machine is clean of any malware. (DO NOT USE IF)
    MALWARE IS STILL PRESENT).

    You can try a repair install or an upgrade in Place.

    You can use another DVD that aren't copy protected but you you need to own
    Product key. It must be the same version 32 or 64 BIT Vista OEM. Also the system
    machine to usually sell the cheap disk since you already own Windows. Don't forget to make a
    good backup or 3 (security in redundancy).

    On-site upgrade
    http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

    This tells you how to access the System Recovery Options and/or a Vista DVD
    http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-console

    How to perform a repair for Vista Installation
    http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

    =======================================

    For extreme cases:

    Norton Power Eraser - eliminates deeply embedded and difficult to remove crimeware
    This traditional antivirus analysis does not always detect. Because the Norton Power Eraser
    uses aggressive methods to detect these threats, there is a risk that it can select some
    legitimate programs for removal. You should use this tool very carefully and only after
    you have exhausted other options.
    http://us.Norton.com/support/DIY/index.jsp

    ================================

    If you are in North America, you can call 866-727-2338 for virus and spyware help
    infections. See http://www.microsoft.com/protect/support/default.mspx for more details. For
    international information, see your subsidiary local Support site.

    Microsoft support - Virus and Security Solution Center
    http://support.Microsoft.com/contactus/cu_sc_virsec_master?ws=support#TAB0

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

  • Pavilion a6327uk will not start. Light output at the rear is enabled, all the work of 3 fans, but does not start.

    I have a Pavillion equipped a6327uk for vista 32 bit. I had similar problems before and remove all cables, hold the button to boot without the power connected, reconnect the and then turn on solves the problem. I suffered a blue screen, where I was told the computer was stop and spills of memory. Then I rebooted the computer froze and since then it will not start. I led on the power supply/process button cable about 30 times more than three days without success. The computer does not go to the HP logo screen, it just stops. Can anyone help with further action please.

    It could be almost anything that prevents your computer from starting to start to eliminate things.  If the computer under warranty?  If this is not the case, unplug everything including the power cord from your computer. Unplug the keyboard, monitor, mouse, readers flash and all other connected outside of the machine. Open the unit and unplug all the devices connected to the power supply except the motherboard.  Disconnect the hard drive cable and power supply data connection, disconnect the connection cable and power supply of the CD/DVD data, disconnect any drive card reader or floppy drive.  Therefore remains connected to the power supply should be taking 20/24 pin to the motherboard and 4 or 8 pin 12V for the cpu power cable.  Remove all cards that may be in the slots, as the video card, modem, network card (if they are not built in to edge of devices.) Just the cards that can be inserted into the slots.  Make sure all items are away from the computer and cannot cause a short circuit when you use power. Look at the motherboard and see if the capacitors were bulged or rounded top and maybe even a brown substance leaking from the top.  Check the video card as well for the same and a blocked fan who may have been not turn.  Test the power supply with a volt/ohm meter if you have one. If this is not the case, turn on the power and see if the fans are running and you get beeps.  If this isn't the case, hold the power button for about 5 seconds until the machine turns off.  Try only a chunk of memory at a time and in each of the slots.  If it starts to act normally, it is probably food.  If the sounds seem normal, unplug the power cable and install one at a time from the video card and connect the monitor to it. Plug the power cable from back in and start the machine.  If you have a video, keep disconnect power, adding another device such as the keyboard and the mouse until you arrive finally to your hard drive.  Do your last hard drive because there all your important data on it and you do not want to expose to all this test.

  • CPU on HP p6130y will not respond unless I have unplug and reconnect.

    CPU will not respond unless I have unplug and reconnect.  The power light turns on but the screen remains black.  Monitor works.  Sometimes it will come around after a disconnect - reconnect.  This morning I had to unplug and reconnect six times before would respond to the computer.  HP model p6130y.  AMD Phenom 9750 Quad Core processor.  Windows Vista.

    23Scorpio wrote:

    Hi old_geekster and thanks for your reply.  I tried to find a site that has the power to my computer and I'm having no luck.  Same HP does not list that they carry the power supply for my p6130y.  You have no idea where I can get this?  Do you know how much it costs?  Thanks again.

    ___________________________________________________________________________________________

    23Scorpio, it's my pleasure.

    You should be able to use any standard ATX PSU in the computer.  I suggest to measure the current PSU and comparing measures that you choose.  I like Corsair and OCZ.  The PSU is the backbone of the computer, it is not the place to save money.  Both in the links I provided are good examples of what you can use.  Read the reviews to see what users have to say about them.

    If your problem is solved, please click "accept as a Solution.

  • My creative cloud will not start. I just get the spinning circle of progress. My fonts are synchronized on the CC and I can't access it, too. Help, please!

    My creative cloud will not start. I just get the spinning circle of progress. My fonts are synchronized on the CC and I can't access it, too. Help, please!

    Hi Joshua,.

    I think you found the turning wheel on the Adobe CC application.

    Please check the help below document:

    Does not open App | Wheels of progress turn continuously

    You can also view the nets below where this issue has been addressed:

    Adobe Creative Cloud / Desktop App / Home Screen: constant spinning wheel

    Creative Cloud Desktop App taped blue spinning wheel after update.

    Kind regards

    Sheena

  • Have a problem with Lightroom 5.4.  Given that the program crashed yesterday, will not start, it comes up with the message "Lightroom has encountered an error when reading the preview cache and need to quit."  "Lightroom will attempt to fix this ti net pr

    Have a problem with Lightroom 5.4.  Given that the program crashed yesterday, will not start, it comes up with the message "Lightroom has encountered an error when reading the preview cache and need to quit."  "Lightroom will attempt to solve this problem, the next time he throws."  Except that it isn't, I get the same message and the program closes.  Anyone know what I can do to fix it?  Can not backup, can't do anything.

    There are dozens of discussions in this forum that describe the fix

  • Satellite A30 will not run on sector, only on the battery

    My Satellite A30 battery recharges the AC adapter when the laptop is turned off, but when I turn on, the laptop runs only the battery and no power outlet. I get a green light indicating that the AC adapter is plugged in but no battery light. The symbol power tells me that it is on the power supply (Full Power Mode). Sounds like something horrible inside.

    Any ideas?

    Hi Suze

    What happens when you remove the battery and you try to start your laptop using only the AC adapter?

Maybe you are looking for