Satellite C660D froze and won't start - Windows could not start

Similar Questions

• Error message: Windows could not open possibly due to a hardware or software upgrade with a black screen and white on Windows XP starts.

  Original title: suddenly Windows XP does not open

  After using the computer someday, he would not start the next time I lit. Windows tried to start but failed and went to a black and white screen saying windows could not open possibly due to a hardware or software upgrade and invites me to try opening windows normally, safe mode, using the last well-known congig, etc... Every choice has ended up doing the same thing, windows tries to start and end up back in the black and white screen.

  Hi Brian,.

  1. you receive messages or error codes?

  2. did you of recent changes on the system?

  You can read the following article and check if it helps.

  Computer stops responding with a black screen when you start Windows XP

  Black screen on startup

  Hope this information is useful.

• Equium A300D - 16 c - Windows could not start

  I have a Toshiba Equium A300D - 16 c, and all of a sudden it turns on and goes on the windows boot and said Manager that Windows could not start and he won t let do me something else.
  I put really know what to do and all my United work is about it.

  It says to put the installation disc windows but it s does don't not to all drives what so ever.

  If anyone could help I'd be grateful
  Thank you

  You can start Windows in safe mode?

• Can not solve the problem "Windows could not find a certificate...". ».

  I read through all the posts related to "Windows could not find a certificate...". "but still failed to get a solution for my problem.

  Well, I have no problem with the installation of this modem to router Wireless G ADSL2 + for both my notebooks of Vista, they work perfectly.

  However, I have difficulties with 2 other computers that move on the XP version. This version XP 2 PCs sometimes show the connection of the signal very strong to my network and sometimes simply shows "Windows could not find a certicate to connect to the network.

  Even when it indicates strong signal to my network connection, I can still surf the internet/LAN.  Where is the problem?

  Can anyone help?

  Thanks for the reply.

  Nonetheless, I have chosen the way easier and solved the problem.

  Connect the network cables for these 2 not for PC XP update and they work just as perfect as my other 2 portable VISTA wireless.

• Lenovo SL500 Windows Vista crashed with STOP: 0x0000007B (0x80599BB0, 0xC0000034, 0x00000000, 0x00000000) error and won't start.

  Original title: Lenovo SL500 Windows Vista crashed with STOP error message and won't start

  Hello peoples,
  I just installed an iMicro Bluetooth adapter on my computer, and then I wanted to restart my computer. When I turned it on, loading like regular until right after the Vista loading screen, when the Blue Screen of Death (a blue screen with an error on this subject) flashed for about 1/2 second and then restarted my computer. Then he asked me if I wanted to load startup repair or simply start WIndows normally and I chose to start WIndows normally, but it's the same thing, so when the computer is restarted again, I chose the Startup Repair. He said that if I inserted an external device in my computer for me to remove it. But I had no external devices in my computer at the same time! I already pulled the iMicro adapter! So when my computer restarted again, I pressed the button Lenovo Care and charge of Lenovo Rescue and Recovery 4. (This is where I am now, typing away in the Opera browser.) I tried to find help, but could not find anythign useful so far. I installed for many drivers, updates, patches, etc. But none have anything to remove the blue screen of death. Now, after 7 hours, I really frustrated, and this is my last hope! (I don't want to save my hard drive and reinstall, because I paid more than 250 applications and more than 270 free programs on my computer! Of more, more than 350 iPad apps, of which a few are paid! Oh and 700 iBooks!)
  Help, please! I'm really desperate right now, and any help would be appreciated!
  Thanks in advance!

  PS I run Windows Vista Home Basic SP2 (I think) on a Lenovo ThinkPad SL500 (NOT SL500c!)

  PPS Lenovo all computers have this Lenovo Rescue Recovery 4, which is like an operating system of its own. It has a browser that you can install updates and other things. Right now I use Rescue and Recovery. Thanks again in advance and please answer my question! I had this problem for a week and I'm in school tomorrow! Thanks again!

  EDIT: The error message went like this:

  A problem has been detected and Windows has shut down to prevent damage to your computer.

  If this is the first time you've seen this Stop error screen, restart your computer. If this screen appears again, follow these steps:

  Check for viruses on your computer. Remove the hard drives newly installed on the hard disk controllers. Check your hard drive to ensure that it is configured and completed proeprly. Run CHKDSK /F to check for hard drive corruption, and then restart your computer.

  Technical information:

  STOP: 0X0000007B (0X80599BB0, 0XC0000034, 0X00000000, 0X00000000)

  Thanks for the billionth time!

  have you tried diving into the blue tooth to the computer with a usb cable before starting the computer u? Sometimes it works

• my iphone 6s erased and won't start

  My Iphone 6s erased and won't start

  Hello

  Follow the instructions here, including contacting Apple Support or your Genius Bar reservation if necessary:

  If your iPhone, iPad or iPod touch won't turn on - Apple Support

• Another that holding down the power button, then by restarting, how should I manage my end 2009 27 "iMac when he crashes on the first blank white screen and won't start?

  Another holding down the power button, then by restarting, how should I handle turn on my end 2009 27 "iMac when he crashes on the first blank white screen and won't start?

  Combinations of keys start for Mac - Apple Support

• Windows could not start on Satellite L510

  HI :)

  I'm not very tech savvy, I've only had my laptop a month. And yesterday, when I turned it back on I got this message...

  Windows could not start. A recent hardware or software change might be the cause. To solve the problem: Insert your windows installation disc, and then restart your computer
  If you do not have the disk, contact your manufacturer computer or system administration.

  file: \boot\bcd
  status: 0x000000f
  Info: an error occurred trying to read the boot configuration

  I have been all over these forums and the internet looking for a solution, but no luck. It's the weekend, so I can not communicate with the service line.
  I would appreciate a process step by step what it is, that I need to download or reset. I do not have the windows installation disc, because it did not come with my laptop.

  I really appreciate your help in advance ;)

  Hello

  Well, the error message says everything to me. Insert the Windows disk * or * contact manufacturing (Toshiba). ;)

  By the way: it would be interesting to know if you can boot into safe mode. Check it!
  If so, you may start the HARD drive recovery. Therefore, select Repair my computer in the Advanced Start menu and follow the instructions on the screen.

  Yes, with the laptop didn't come a disc, but you can create one!
  Please read the operating manual always first.

  Now it s too late to create such a floppy, but you can order directly into a new Toshiba:
  https://backupmedia.Toshiba.EU/landing.aspx

• Desktop Compaq Presario has beep and won't start

  My Compaq Presario desktop PC makes a sound beep and won't start. The SN # is CNX65112RS. Someone help me please!

  That's great. Please mark the thread as solved.

• I have a windows computer 7 and when I boot it says windows could not start then he normally open windows or repair.

  * Original title: windows startup

  Hi I have a windows computer 7 and when I start it up it says windows could not start then it says windows normally or repair I choose windows star normally and his coming as a code error 0x0000005c and I did they opsen others, but still the same error code I just wanted if I can back up my photos because they are good, or I can try to solve this

  Thank you

  The BIOS back to their default level settings.

  • Make sure that all internal cables, cards, and other components are installed and correctly.
  • Start your PC with essential hardware only.

  If no change:

  Perform Diagnostics on the memory and hard drive tests.

• Windows could not start the IKE and Authip IPsec keying service modules on the local computer. Error 1075 the dependency service does not exist or has been marked for deletion.

  Hi, I'm trying start the IKE and AUTHOP service from the SERVICES screen but I get this error:

  Windows could not start the IKE and Authip IPsec keying service modules on the local computer.  Error 1075 the dependency service does not exist or has been marked for deletion.

  original title: ike and authip error 1075 the dependency service does not exist or has been marked for deletion

  Hello

  Remember to make changes to the computer before the show?

  You can follow the below methods:

  Method 1: Restart Windows and try to start the Security Center service.

  If you still receive the same error, make sure that the WMI service is launched and running:

  (a) click Start, run , and then type Services.msc

  (b) double-click Windows Management Instrumentation

  (c) set its startup type to Automatic

  (d) click Start to start the service, and then click OK

  (e) restart Windows.

  Method 2: Restart the service

  Windows logs an error if the service IKE and AuthIP IPsec Keying Modules or the driver does not start, or suddenly, they end.

  To restart the IKE and AuthIP IPsec Keying Modules service:

  To perform this procedure, you must have membership in the local Administrators group, or must you have been delegated the appropriate authority.

  (a) restart the service. You can do this from a command prompt or in the snap-snap-in Services Microsoft Management Console (MMC). Do one of the following:

  ·         Start an administrative command prompt. Click Start, click principally made programs, Accessories, right-click guest, and then click run as administrator. At the command prompt, run the command net start ikeext.

  ·         Click Start, type services.msc in the Search box and press ENTER. In the column name of the Services snap-in, right-click on IKE and AuthIP IPsec Keying Modulesand then click Start.

  (b) if the attempt to restart the service fails, restart the computer. This forces all related and dependent services to restart.

  (c) if the error persists after restarting the computer, then the executable files for the driver or service may be damaged, and the operating system must be reinstalled.

  Note:

  You can check that the IKE and AuthIP IPsec Keying Modules (IKEEXT) service runs by using the Component Services Microsoft Management Console (MMC) or the net start command line tool.

  You can check the link: http://technet.microsoft.com/en-us/library/cc733299 (WS.10) .aspx

  Method 3: Run a scan of the System File Checker.

  http://support.Microsoft.com/kb/929833

  It will be useful.

• Windows could not start. A recent hardware or software change might be the cause.

  I have a Toshiba M300 and it fails to start. Here's what he said.

  Windows could not start. A recent hardware or software change might be the cause.

  If the files in the window were damaged or configured incorectly, startup rapir can help diagnose and fix the problem. If the power was interrupted during startup, choose start windows normally.

  Lanch Startup Repair

  Start window normally

  Well, I had two options... and nothing works. It gets stuck just on loading thingy, where it says MICROSOFT WINDOWS and keeps loading... I leave for 2 days and he continued make it... and it also won't let me restore my computer...!

  PLEASE HELP :(

  Hi Suzanna2001,

  Were present from recent changes to the system before the show, such as adding new hardware or software (including Windows Update).  You have access to a Windows CD/DVD?  Run the startup from the CD/DVD repair.  There is also an option to perform a restore of the system on the CD/DVD.  If no option is the problem, follow the steps below:

  1 1 demarrer start from the Windows 7 DVD, select your language and keyboard options, select repair your computer, and then select command line.

  2. from the command prompt, run the following command:
  DISM image:c:------/ Get-Packages

  This will produce a list of updates installed and packets.  They will look like this:

  The package identity: Package_for_KB978262 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.1.1.0
  Status: installed
  Output type: security update
  Install time: 02-11-2010 13:01

  3. find the most recent and then make a note of the identity of the package.

  4 run:

  DISM image:c:------/ Remove-Package /PackageName:Package_for_KB978262~31bf3856ad364e35~x86~~6.1.1.0 (name of the update from the previous step)

  Until it is complete, you will get a status of the collection.

  5. restart your PC.

  You want to start with the most recent, and then remove them one at a time to find the problem update Dena
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Vista: windows could not start error. is suspended from the "Microsoft Corporation" loading bar then black screen BIOS not acpi compliant

  After you have installed the driver for the zune hd, I was asked to restart my computer. After the reboot, start froze on a white screen. I've seen this before and it is usually because of some connected usb components. so I manually powered down the Tower, disconnected the cable from zune and restarted. This time a screen saying that windows could not start, "launch Startup Repair tool" was recommended. Select this habit makes the startup hang to the progress bar from Microsoft corporation, then to a completely white screen. Although strangely, once only a blue error screen appears which says that the BIOS is not acpi compatible. I can't restart with F8 to go into safe mode, "windows error recovery" still appears. "Start windows normally"produces the same results as the tool to restart launch system. " I have a drive to upgrade to windows 7 and a windows XP upgrade disk. the disc of windows 7 hangs at "starting windows" and the XP disc gives a blue screen error: stop: 0x0000007B (0xF78D2524, 0c 0000034, 0 x 00000000, 0 x 00000000)

  I think I have a BIOS problem, but I don't know how I could continue dealing with the repair. I have no success update the bios from usb flash. Any idea is appreciated.
  Update: managed to start with F8, choose to boot in safe mode and loading hangs after "load: \windows\system32\drivers\crcdisk.sys"***.
  the machine is a gateway LX6810-01 (friend motherboard)

  Hello

  1. What is the exact error message when Windows Vista does not start?

  2. you have the disk Installation of Windows Vista operating system?

  I suggest you change the mode of RAMA to IDE in the BIOS. You can contact the PC manufacturer for assistance.

  Note: BIOS change / oxide of additional metal (CMOS) semiconductor parameters incorrectly can causeserious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

   

  In addition, perform a check disk in Windows Recovery Mode.

  (a) Insert the Windows Vista installation disc in the disc drive, and then start the computer.

  (b) press a key when the message "Press any key to boot from CD or DVD".

  (c) select a language, an hour and the currencyand a keyboard or an input method, and then click Next.

  (d) click on check drive for errors.

  (e) in the System Recovery Options dialog box, select the drive of your Windows installation and click Next

  (f) to the System Recovery Options dialog box, click on check Drive for errors.

  (g) use the switch/r to run the disk check.

  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost

   

  It will be useful.

• Windows could not start HomeGroup Listener

  Windows could not start HomeGroup Listener on. Local computer. For more... the 2147023817 service-specific error code. I also have a problem with the provider of the home group. . I tried almost every thing. .. .i can join the Group of home. Thank you

  Don t think it has something to do with the Toshiba laptop.
  It looks like more because of Microsoft.
  Found this discussion in the Microsoft forum:
  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/thread/453c3e1d-A980-417C-a6e6-d4c5c1af79a1

  _Someone wrote there: _

  + For those of you who could not startHomeGroup service listener and HomeGroup provider to ensure that these services are started and set to automatic: +.

  +-Function Discovery Provider Host +.
  +-Function Discovery Resource Publication.

  + (Activate in the following order): +.
  +-Peer Networking Identity Manager +.
  +-Peer name resolution protocol.
  +-Peer Networking Grouping +.

  + If these services are disabled this is maybe the reason why you couldn't create a homegroup. +

• Windows could not start. Winload.exe corrupted

  Been having some problems with my Equius has therefore decide to start, F8 and do a system restore toshiba.

  Started and started to format the drive. All of a sudden he projected blue.

  The problem is now I can not even start until now to get the recovery/restore option. I get: -.

  Windows could not start. A recent hardware or software change might be the
  cause...

  File: \Windows\system32\winload.exe
  Status: 0xc000000f
  Info: The selected entry could not be loaded because the application is
  missing or damaged.

  Not sure how it all works, but I guess that recovery stuff are stored on a separate partition. Problem is I guess you must be able to start to load windows before you even get to do this?

  I downloaded and tried a boot with no joy, and of course vista recovery disk, toshiba provide a vista disk. How the hell can I recover from this situation?

  Hello!

  If you are not able to get in the boot menu for HARD drive recovery, you must use a Microsoft Vista disc to reinstall the OS.
  Or you use the Toshiba recovery disc but I think you forgot to burn the disk because normally you get a message (recovery point) you want to burn the disc.

  However, you can order a Toshiba Toshiba recovery disc directly:
  https://backupmedia.Toshiba.EU/landing.aspx

  Good bye