Satellite C670D - 11K - Toshiba recovery disks does not work
I tried to recover the Satellite C670D - 11K using new factory system recovery disks provided by Toshiba. Both drives do their thing until the end when I get these messages:
Files\mcafee\virusscan/dat\000.0\avvscan.dot c/program Error (error = 1117)
Error restoring image
request could not be performed due to the i/o device error
Error image x could not apply for win 7 V:\\HDDRecovery\SWIMG\15434XSP. Water rain Index 2 in c HARD drive management
Only option after this point is to press a button any and I get the white screen Toshiba
When I turn on the laptop I get message "boot mgr is missing." I tried the disc of recovery a couple of times since and things don't get any better. In fact I just get a black screen with cursor after
Suggestions this is appreciated please? I was thinking of buying the recovery disks would be a solution simple but should I give in and go to a professional now?
I assume you are using recovery discs that you created using Toshiba recovery disc creator tool, right?
It seems silly now, but something went wrong and I m afraid recovery disks are now useless. It turns out that you can't change anything or force the cell to the recovery image installs successfully.
The only thing you can try is - http://aps2.toshiba-tro.de/kb0/HTD4103KB0000R01.htm
I don't think this will help, but you can test it in any case.
Now, you have two options:
-for the restore disc original order from Toshiba
-install the clean version of the OS by using the Microsoft installation disc
I'm selling my laptop.
Went to use recovery of original product CD provided along with the PC.
1 disc worked OK - unfortunately 2nd disc (undamaged) stops at about 60 percent and gives the following message;
error number 437
Can not read the file
version: 7,00 (Apr 2001 19, build 254).
command line arguments: - clone, mode is pload, srx = x: \01367000.GHO:1, dst = 1:1 - batch
PROG mode: prog_local
Name of the path:
dump file: x:\01367001.GHS
State of IRQ of mouse: no IRQ (0)
I have a buyer waiting and everything seems to be Dutch!
It's not easy to say what's wrong with the 2nd recovery disk.
I would recommend formatting the HARD drive completely and try again to recover the operating system. If it doesn't work, well try to contact Toshiba. Here, you can order the recovery CD. Maybe the problem of recovery will be solved as a gesture of goodwill.
Nevertheless, the recovery cd is not expensive.
My problem is that when I used the restore disk provided with the laptop it froze the computer when he was to "expand our files (0%). »
I thought that drive was defective, so bought a new drive of Toshiba (£30) but get the same error.
Machine is now starts rained because the recovery disks erased the hard drive before freezing.
To be honest, this is the first time I see this error
I doubt that the recovery disk is defective or the drive HARD because as you say it was possible to install Win XP on this laptop
I would recommend formatting the HARD drive again to erase all partitions and format the HARD drive using the Win XP disc. Then take the recovery disk and try to reinstall the new Vista operating system
XP Recovery disk does not work. The 3 options are unresponsive. Is there an easy solution. All other functions of cell phones seem ok. It is a reliable machine for more than 3 years, but now must use the recovery disc. Brilliant ideas greatly appreciated.
Well, I put t know why you recovery CD doesn t work. Have you checked the CD some scratches? Have you tried to clean this CD?
However if it of impossible to use the recovery CD, you can contact the ASP and buy a new one. It doesn t expensive.
In addition, you can install an original Windows operating system and then all the Toshiba necessary drivers on the Toshiba site.
I'm having some problems with my Toshiba Satellite M40, and I decided to reinstall the OS with the recovery of the dvd disk, but the disk does not start.
When I'm on windows, the cd/dvd driver works perfectly, and I don't think that the recovery of the dvd disk are damaged.
I have already tried:
1. by pressing the "C" key to start the computer
2 - press "F12".
3 - Enter the BIOS Setup and select cd-rom to start first
But the computer starts up normally and no error message appears
Can someone help me? I don't know what to do
Can you please test it with some other bootable CD or DVD? It will be interesting to know if this happens with the recovery media only or even with other bootable media.
I have a toshiba Satellite C650, who has recently developed with a disc read error. I want to access the command prompt to try some possible solutions I've read on the internet.
I made a Windows 7 recovery disk using my other acer laptop which has also installed Windows 7 64-bit. When I use the recovery disk and it loaded the files etc it evokes just a black screen and the cursor.
Does anyone have any ideas as to why this is happening?
I tried to start my computer acer laptop from the recovery disk and it worked fine.
As is - this does anyone have suggestions as to why I get the message "disk read error - press ctrl, alt and delete to restart?
Any help would be appreciated, thanks.
On this virtual path, it is not easy to offer the exact diagnosis, but of course, there must be a problem with the HARD drive. Can you get a second one for test purposes and exchange it. Just to be sure if the HDD is troublemaker.
But there is something else:
> I made a Windows 7 recovery disk using my other computer acer laptop...
Sorry, but I don t understand this. Can you please explain what you did exactly?
I have a L350-170 running Windows Vista home, I recently buy a Toshiba restore CD and now that it's happened, it does not work.
I put in the CD and boot from the CD drive, I can hear work and the display shows "Windows loading files" and a bar appears at the bottom of the screen, after that, the screen turns white and all I'm left with is a pointer of the mouse and a black screen.
Have you tested if the laptop would start using another bootable Linux Live CD, WinPE or Win XP disc?
Please check that would help determine if the problem is related to the computer laptop or recovery disk.
Please also check if the HARD drive is ok. For this test, you can use a test called Drive Fitness Test free HARD drive tool. Google for it.
However, it could also be a defective recovery disc and in this case, you should get in touch with the guys where you ordered this drive may be you need a replacement.
I have an old Satellite A30-203 and have a problem. I tried to format my laptop but the product recovery cd does not seem to work in deletion the data on my disk, its becomes blocked during loading files of ntfs? Now I am not able to retrieve a windows session would I need a new product recovery cd and would be able to get it?
It is difficult to say what is the reason of this but made is either it s a laptop problem itself or the recovery disc (e.g. scratches) causes this problem.
In my opinion the best way to check this using a Microsoft Windows disk. If the installation completed successfully, you need a new recovery disk. As a result, you can ask a service provider authorized in your country! :)
I have a weird problem, I bought the computer 6 months ago and have been happy with it, but I'm protected by a kind of virus and all the operating system has been * ed big time, so yesterday I want to da a factory install with recovery disks that I created when I bought the computer.
I have the Toshiba system recovery DVDs 4 disc, I insert the sytem disc and look as it should, it loads and then it ask disc of recovery disks, insert disk 1, and after 10 seconds it ejects again and claim a disc again.
I checked the 5 discs on my other computer and there are data on them and they look good, I tried to insert the discs to see if I'm past them when I printed on them, nothing works, it simply will not recognize disc and I'm stuck? Any help from anyone?
I'm sure that's not material that are bad, because I had an old windows XP disk, and after that I tried everything, I tried to install on the computer and everything was fine, but I would like to have windows 7 as the computer came with...
Regards Allan Thomsen
Very strange boyfriend
Would it be possible that the CD/DVD drive is unable to read the first disc correctly?
I mean, maybe it's a disk problem and not the problem with the data
I don't know what's wrong here, but you have some a lot of m options here:
To recover the laptop, you must use the Toshiba recovery disks or HARD drive recovery
You can use the HARD drive recovery process?
Turn on the device, press F8, choose fix my computer-> drive HARD recovery.
If this is not possible? Well. You can always order a new disc here:
My laptop's daughter was so slow, that we decided to take it back to factory settings. There is no disk recovery with the laptop because it has the repair work however when we did the computer is no longer started upward and when we started it in safe mode, the repair option was gone!
I've then went to Toshiba.eu and bought the recovery disc, seem to work, load files etc and then says loading windows, but the screen just goes black.
I can't find a phone number or contact point on the invoice and if I will have to consider in a shop to repair I don t want to have paid for both disks that do not work!
I do something wrong or can any one help?
New laptops are available with preinstalled operating system and without recovery disk but in user s manual is clearly described that you can create this preinstalled software recovery disk Toshiba Recovery Disk Creator.
I m wondering really you didn't mark this option.
In any case, try to reuse this disc to see if the problem occurs again and again. If you will not be able to install the original recovery image I recommend you contact the nearest Toshiba service provider and ask for help.
I have a Satellite P300 - 13M. I want to reinstall my Vista, but the recovery of the program disk do not work.
I do not have to uninstall the program, it is also on my list of software. I can see the program in C:\Program Toshiba Toshiba Recovery Disc Creator, but when I click on ToRDC.exe it does not start.
These are all the files in the map:
13/08 / 2008 17:30 < DIR >. +
13/08 / 2008 17:30 < DIR >... +.
28/02 / 2008 20:49 < DIR > Img +.
19/03 / 2003 13:14 msvcp71.dll + 499.712
21/02 / 2003 21:42 msvcr71.dll + 348.160
30/10 / 2006 08:27 tdcmdpst.cat + 7.958
27/10 / 2006 23:36 tdcmdpst.inf + 4.093
18/10 / 2006 11:50 tdcmdpst.sys + 16.128
11/03 / 2006 03:30 122.880 TDComSet.exe +.
21/11 / 2007 17:09 TDMSTING.dll + 262,144
21/11 / 2007 17:23 TODDSrv.exe + 129.632
12/06 / 2007 13:59 1.212.416 ToRDC.exe +.
+ 14/02 / 2006 16:23 TosChk.dll + 57.344
24/06 / 2007 19:39 TrdcHelp.html + 9.657
25/10 / 2005 08:53 VXBLOCK.dll + 28.672
+ bestand (en) 2.698.796 12 bytes +.
I also have the map on E:\HDDRecovery with all the files in it (4.12 GB).
Is there a way that the program works or can I make HDDRecovery map an ISO image and burn it to a cd?
> I do not have to uninstall the program, it is also on my list of software. I can see the program in C:\Program Toshiba Toshiba Recovery Disc Creator, but when I click on ToRDC.exe it does not start.
Sorry for my question but what you want to do exactly?
You want to retrieve the laptop using the recovery disk or you want to create a recovery disk?
The Toshiba Recovery Disc Creator creates the recovery disk using files in HARD disk recovery file that is placed on the second partition.
If you want to recover the laptop, then you simply boot from the recovery disc.
Hey guys I need your help,
I installed windows 7 ultimate on my toshiba Satellite A505 s6970 and I downloaded all the drivers from http://www.csd.toshiba.com/ and I installed all.
When I open the Device Manager, 3 devices are not installed (Base-2 system device / / 1-Unknown device).
Then I installed toshiba service station (Windows Vista / 7 32-64 bit because my windows is 64) it will search for and automatically download all necessary devices, but it does not work on windows 7, it worked perfectly in windows vista.
Also the eco utility does not work, and the media touch buttons work just fine, but without giving that voice tone.
Thanks for your help
To be honest I have no experience with this tool.
I m using Tempro.
However, I guess that Toshiba service station was not tested and not designed for Win 7 at the moment.
You may need to wait for the next update that works correctly with Windows 7.
You must understand that the Windows 7 drivers have been released in Beta version, it would mean that the final version would be released in the near future
In my opinion, you should take a look from time to time on the Toshiba page we.
I noticed that each new day pilot is released and released.
my recovery for a6057c disk will not work after that I used the NeoSmart
After logon to Vista I see that empty office, I can access the task
Manager by CTRL - ALT_DEL.manager.
Windows and all my files are on drive D and my C is the drive has nothing on this subject now. I'd do it
I just want to make a disaster Recovery and
all over again with new factory. Does anyone have any ideas?
I now remove the prtition C on my drive.
Vista still labels the d drive, I have no C?
I found the answer on the Microsoft Knowledge Base.
Item number: 947288 primary partition drive letter designation is lost when you use WinRE to repair a GPT in Windows volume
The article is also for Vista.
Article ID: 223188 How to restore the drive letter of the system / boot in Windows
Would do the same thing.
I took the article to use regedit to swap my C & D return records.
Now windows Vista starts OK. (All I had before was just an empty office).
I also received my HP Factory disaster recovery disks it looks they will work if I need.
I copied 2 cd on my hard drive disk recovery & disk #2 does not work. I tried to get through the system recovery to restore the computer to its original factory shipped State. It calls into original form and content reinstalles. Then it restarts to finish and said: ERROR LOADING C:\PROGRAM FILES\WINDOWS MEDIA PLAYER\wmssetup.dll THE SPECIFIC MODULE COULD NOT BE FOUND!THEN IT CONTINUES TO THE NEXT WINDOW WHICH SE BED:INSTALL WINDOWSWINDOWS COULD NOT PARSE OR PROCESS UNATTEND ANSWER FILE FOR [SPECIALIZE]. THE SPECIFIED IN THE ELEMENT OF THE RESPONSE [MICROSOFT-WINDOWS-DEPLOYMENT] FILE.AFTER THIS WINDOW IT SAYS PRESS OK BUT MY LAPTOP DOES ME NOT LEAVE THE REST OF THE ARROW IN THE MIDDLE OF THE WINDOW & WON'T LET ME CLICK ON IT! WHAT CAN I DO TO GET THROUGH THIS PROCESS!YOUR HELP WOULD BE GREATLY APPECIATED! THXS
Contact the computer manfacturer, who provided the original discs.
I replaced my hard drive on my laptop HP - computer pavilion dv7 notebook. My recovery disks do not seem to work now, I get to 62% completion and then the error message "Recovery Manager is unable to restore your computer by using the original image. Please contact HP support. "Error code: 0xe0ef000e" do I need to buy a new HP recovery discs? Thanks, Nick
Unfortunately, I don't have any experience in troubleshooting these special software installations.
We should expect to download and install.
If they are not, I have no tricks up my sleeve for you to try.
I recommend starting a new thread describing your questions with this software and hope that someone else in the support forum can help you with these items.
See you soon,.
Maybe you are looking for
Hello I use a database mySQL and sql toolkit 2.0 in application of Labwindows CVI. I have a problem when the database increases in size. Indeed, when the number of records reached 3 million, the program memory is 1.7 GB. So, it stops on an Out of Mem
Original title: not admissible error in windows When I open Internet explorer in windows and I am trying to use facebook or no matter what games, I get a script error has occurred on this page want to still run and also first message is unacceptable,
I have an older comp with windows xp. I bought a new sony lcd with the intention to use it also for a super size moniter. I plugged with a RGB cable and was well at the first and soon my screen has a blue yellow cast. Thought is on TV so I exchanged
I have a Dell E510 desktop on which I've recently updated my printer to a printer wireless HP Photsmart 7520. I am running Windows 7 32-bit professional, an Intel Pentium 4 3.0 GHz CPU with 4 GB (usable 3.24) RAM. The new printer worked for about two
I am new to Cisco dot11radio configurations. Can someone please share the commands that I would use to define 2.4 and 5 Ghz radio so that older laptops can see their SSID broadcasts and connect. Thanks in advance.