Satellite C70 - A - 16 L - 3 vertical white lines in display

Similar Questions

• Broke the screen on Satellite Pro P100 - 1 1/2 "vertical white line

  Hello
  I have a Satellite Pro P100 which is only 21 months old and have recently acquired a white strip to the bottom of my screen which is located near Center. I looked into the possible solutions for this and followed the instructions carefully to see if it was a software problem which he seems not to be. The only possible solution seems to be to get the screen replaced. I would like to know if there are many of you who have had this same problem because I'm disgusted that I need to get this replaced so early in his life.

  I don't even use my phone as a laptop (IE it transport etc.) it is simply sitting on my desk at home. I just checked my warranty and apparently it was submitted only for 12 months! Just my luck!

  If anyone has any suggestions on how to best to argue my case with Toshiba in get this replaced for free then the answers are welcome.

  See you soon,.
  Corrina

  > Only possible solution seems to be to get the screen replaced

  Either it's a display or the fault of the graphics card!
  You can try to connect the external monitor to test if the same would appear on the second monitor.
  If the question seems not on the external monitor then it s not a graphics card issue but possible display of the laptop problem.
  In this case, the authorized service provider should be able to provide more details and how to fix it.

  Good luck

• vertical white line on the printed document

  A vertical white line appears on all printouts.  The text print normally on the white line on color documents. on black and white documents, white interrupted the printed text, how this can be fixed?

  I use a portable printer Officejet 8500 a Premium with Windows 7 Ultimate.  However, the problem has resolved spontaneously.  I cleaned and aligned several times and my assistant copy a number of documents on the printer and then printing my document there was no evidence of the vertical white line.  Thank you very much for your help.

• Satellite M30-853 - vertical white lines or black spots on the screen

  Hello

  I have a laptop Toshiba Satellite M30 - 853 during nearly four years. A few days already, I'm having a problem that they come from the white lines vertical or black spots or screen is smear when I am trying to move a window from time to time. My wireless adapter is in use.

  The vicinity of processor, video card and wireless network card are very hot. My cooling fan is starting and stopping, but I'm not sure of its effectiveness.

  I disassembled the laptop to clean it if there is little to dust, but I found it in very good condition. Anyway, the problem persists and I am looking for decision. Someone told me that probably that's because of the defective video card memory. It's strange to me because the problem is not permanent it is often and if I try to cool the surface it disappears.

  I'd appreciate any suggestions.

  In my opinion, these issues must be verified correctly. This can be done using different diagnostic tools. It is important to know what the problem cases.
  Of course, it has something to do with the temperature of material and graphics card. Sorry but I'm really skeptical, you can do something alone. Maybe you should seek professional help.

• Satellite M65-S9063 - vertical white lines appearing at the bottom of the screen!

  Hi all - ideas...

  Model M65-S9063 about 3 weeks ago a white vertical line appeared to the bottom of the screen, it's around a mil thick.

  Then yesterday a second is appeared, a little thinner this time. They are still there even after a reboot! It does not appear that any video is displayed as they are always white. I was wondering maybe graphics card? Or maybe the LCD itself?

  Has anyone seen this before?

  Thank you very much

  Hello!

  You simply determine the reason for this question. Connect an external monitor to the laptop and see what happens.
  If you see the same error on the external display, it s a map or graphic display driver problem. If you don t have this problem on the external screen, you must go to an authorized service provider to swap the internal display.

  If you use a driver display Toshiba not you must remove it and test it with Toshiba drivers.

  I hope I could help a bit.

  Good bye

• T2300 scans leaving a vertical white line

  When scanning, a white vertical line on a width of 5 pixels is on the exit on the left side of the page.

  I was about to order the CIS component to the far left or the Narcotics Control Board. Everything has been cleaned.

  Should I try the CIS elements is on the left with one directly to the right of switching?

  Sorry for the not to return to the instance in a case in a timely.

  I swapped the bad CIS 'A' element with the element 'E '.

  Problem solved.

  The bad LED now overlaps with the CIS below and to the right element.

  Very easy to work.

• HP Officejet Pro 8000 printer range makes the vertical white lines

  My HP Officejet Pro 8000 printer makes white vertical lines around text and photos.  What can I do?  I use Windows 7.  As far as I can see, the print heads don't need to be changed. Cleaning them would help? If so, how can I clean them? Thank you.

  Hello

  You can try the steps listed in this document:

  Troubleshooting print quality problems

  Let me know if it helps

• Screen Satellite A200 - 14 d has a horizontal white line

  After a month of use of the new laptop A200 - 14 d, I had a problem on LCD on this boring white horizontal line is always considered.

  Is there anyone who knows the troubleshooting?

  Kind regards
  Omer

  Hello

  This line is presented permanently and you already tried to connect your computer to an external display to check if you have the same problem on it?
  If Yes, you have a serious problem and it cannot be hollow fixed an update of the BIOS, or something. You should immediately contact an ASP in local,
  and they will do a hardwarecheckup and a repair on your machine. If you need a link, here´s a global Locator ASP, where you can find near the ASP in your country:

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/Su/su_gaspLocator.jsp?subs=TAIS

  I wish you good luck. :)

• my screen has vertical white line about 1.5 inches what casuses it and what I can do

  the computer works fine, but the vertical line on the screen about 1.5 inch on the left side does not go away making it and can it be fixed

  Hi Mina,

  1. which version of the Windows operating system is installed on the computer?

  2. Since when are you facing this problem?

  3. is it a laptop or a desktop computer?

  If the line is there since the first part of start-up (before Windows started in fact), the problem is with the screen itself.

  This is most likely a hardware problem. You can connect another monitor if it is a desktop computer or connect an external monitor, if it's a laptop to check the issue.

• White line to help align the clips?

  There used to be a vertical white line with arrows that would leap upward when I was dragging a clip at the beginning/end of another clip on my calendar... but now it is no longer present. Anyone know how I can go back this feature?

  He was very helpful in cutting accidentally seconds when I drag a clip to the end of another...

  I think you're looking for the snap.

  Make sure that the icon with the magnet is pressed.

  

• Distorted screen of the console using Ubuntu Linux on Satellite C70-B-212

  Hi all

  I have a problem with Linux on my laptop Satellite C70-B-212. The videochip Intel Graphics 4400 is supported by Linux, but on this laptop, it gives very distorted output on the console screen. I see a few vertical lines on the screen showing a few ghosts strange images of the output.

  The Office of exit itself seems to stop smoking well, until I have a screen and move it to the bottom of the screen. You can see the top of the screen some distortion in the upper line.

  In Windows everything works fine. When I use the parameter 'nomodeset' turns off the kernel mode setting these lines do not appear. But then, I expect that 3D hardware acceleration is disabled too.

  I suspect that this is a timing issue with the screen of the computer. Just a very minor lag on the clocks or sync.
  It could be just my laptop and then it just cloud be replaced or maybe it has to do with the series.
  Anyone seeing the same issue on this model or series.

  Having Linux on C70-B-212.
  Who can verify this by starting Linux liveCD on laptop C70-B-212.

  Thank you

  Marco

  Hi Marco

  It sounds like a driver problem => kernel.

  You can try a kernel later maybe?
  Do you know that you are using atm?

  in terminal type:

  uname - r

  Course Fedora uses 3.16 nuclei which is a very recent (if not the most recent) output.

  Some Ubuntu distro oriented have test of nuclei in the repositories, you will have to add it manually.
  Maybe it's worth a try?

  Tom BR

• Any warranty on Toshiba Satellite C70-C-199

  Hello

  I have a Toshiba Satellite C70 - C - 11 L half a year to Emag, Bucharest, Romania.

  I bought both it of Toshiba laptop and who are also to benefit from the guarantee that no matter what guarantee.

  3 weeks ago, it crashed, I sent him to a service allowed to Bucharest, Depanero Service.

  Their response was that is the faulty motherboard.

  I asked recover my data from the hard drive, because the storage is ok, it is not affected.

  But they said that the guarantee no matter what does not cover this.

  It is right, it is possible to be like this?

  Please check BIT ANY CE WHO GUARANTEE PROMOTION, TrustToshiba.pdf, it is very important for me.

  I was very shocked when I found.
  Depanero it is a Toshiba authorized Service partners, they require a fee for the DATA RECOVERY.

  Thanks in advance,
  Gabriel Popa

  My laptop has been with Toshiba repair now for more than 4 weeks. He apparently has a faulty motherboard. They say that Toshiba has no motherboards and cannot give me any estimate of when I get my laptop back. They charged me close to £100 because one of the bosses live had broken probably due to excessive torque when it is assembled. They said he had been abandoned, but has refused to provide proof of this. They say it's what Toshiba has said to do. Toshiba says it is Toshiba repair. Bottom line is that Toshiba is zero. I will never buy another machine of their share waste service after sale.

• Satellite C70-C-199 - dual channel mode is not active for RAM modules

  Hello

  I recently bought a Satellite C70-C-199 laptop with 4 GB RAM and I installed a module of RAM 4 GB more.
  The module I installed is not recognized by the BIOS.

  What I tried:
  (1) replace the Rams repeatedly.
  (2) exchanging the two Rams between the two slots.
  (3) BIOS update to the latest version

  On the link down below, you will find some reports AIDA64 that contains details on the chipset and the two RAM modules.
  https://drive.Google.com/open?ID=0By...ndwZUZoV3lCMTQ

  Thank you for your help in advance.

  I found the problem. This laptop needs DDR3L. This means that the RAM modules operating at 1.35v. My 4 GB Kingston works only at 1.5V.

• Unable to connect by Satellite C70 - A - 16 L to my WLAN

  I bought a Satellite C70 - A - 16 L today, when I tried to set up a wifi connection using my known password I got the message "cannot connect to this network.

  I'm not a techie whizz, far from it and I wonder if I am missing something that may be obvious. The laptop detects my network OK.

  I will be grateful to anyone who can help you with this.

  Thank you.

  If your laptop can detect your WLAN means WLAN is successfully activated. Please make sure that you use the correct password and make sure you have it points right.

  What you can try is to remove the WIFI password for several minutes just check the WLAN connectivity.

  Using LAN, everything must be OK, right?

• Satellite C70 - B - Touchpad does not work

  A couple of months, I bought the Toshiba Satellite C70-B-212. However, in recent weeks the Touchpad no longer works. I already reinstalled the driver, but that didn't help.

  What can be the problem?

  Go to the BIOS settings and check if the pointing device is enabled.
  You can also load default settings in the BIOS. This should allow the pointing device (touchpad) too.