Satellite C70-C-199 - dual channel mode is not active for RAM modules

Hello

I recently bought a Satellite C70-C-199 laptop with 4 GB RAM and I installed a module of RAM 4 GB more.
The module I installed is not recognized by the BIOS.

What I tried:
(1) replace the Rams repeatedly.
(2) exchanging the two Rams between the two slots.
(3) BIOS update to the latest version

On the link down below, you will find some reports AIDA64 that contains details on the chipset and the two RAM modules.
https://drive.Google.com/open?ID=0By...ndwZUZoV3lCMTQ

Thank you for your help in advance.

I found the problem. This laptop needs DDR3L. This means that the RAM modules operating at 1.35v. My 4 GB Kingston works only at 1.5V.

Tags: Toshiba

Similar Questions

  • Dual channel mode is not enabled on the Satellite P50T-B-10V

    Hello

    I recently bought a laptop by Satellite P50T-B-10V.

    Everything works fine, but I saw in the software helped that it s not activated for 1The memory channel mode, although the chipset support this mode.

    How can I solucionate what mind?

    + Memoria driver +.
    + Type Dual Channel (128-bit).
    + Modo Activo single channel (64-bit) +.

    I hope that your answers! Thank you!

    Dual channel mode can be activated manually.
    Mode dual channel will be activated and used automatically if all of the requirements be fulfilled.

    What does that mean?
    Well, to use the two channels, you need two memory modules and both modules need to support dual channel.

    The Satellite P50T-B-10V seems to be equipped with a module of 8 GB RAM
    http://www.Toshiba.PT/laptops/satellite/satellite-P50-b/satellite-P50-b-10V/

    This is why the double channel does not appear to be used.

  • Aspire Revo R3700 memory does not work in dual-channel mode

    Hello

    I have a Revo R3700 a few years now with 2 GB of memory. The PC came with the DDR3 10600 Hynix 1x2GB memory module.

    I recently bought a second module of the same 2 GB of the same brand (Hynix) and part number.

    After you install the BIOS and Windows detects 4 GB with no problems and everything seems to work fine, but CPU - Z tells me the following:

    (1) it is running in single channel and not dual-channel mode.

    (2) aren't 399 MHz and 800 MHz.

    3) SPD 1/2 bandwidth is 667 MHz and no 1333 MHz.

    Do I need a BIOS update or configure something?

    Sorry if I mix things up.

    Thanks in advance

    I've attached screenshots below.

    Module original stock Acer is on the left. A new one on the right.

    The Aspire AR3700 doesn't support dual channel. This system only supports single channel.

  • The KB2929437 patch is not installing on my PC. Without this fix IE 11 business mode is not activating.

    I am running Windows 7 and IE 11. The KB2929437 patch is not installing on my PC. When you try to install, I get the message that this patch is not applicable to your PC. Without this fix IE 11 business mode is not activating. Help, please

    Hello

    Please contact Microsoft Community.

    Please provide detailed information about your question.

    According to the description of the problem, it seems that you can not install the patch (KB2929437), this problem may occur if one or more of the following conditions are met:

    1. The Windows Update database is damaged.
    2. Antivirus software is configured to scan the folder % Windir%\SoftwareDistribution.
    3. Service (BITS) Background Intelligent Transfer Service does not receive a content link header.
    4. A required system file is incorrectly registered.

    If it helps, try the methods and check them off below.

    Method 1

    If I'm wrong, you tried not Troubleshooting Windows Update below to solve your problem and if this isn't the same link, then try to run the troubleshooter.

    Open the Windows Update troubleshooting tool

    http://Windows.Microsoft.com/en-in/Windows7/open-the-Windows-Update-Troubleshooter

    Method 2

    Step 1

    If the problem persists I suggest to reset the Windows Update components and for this, try to run the fixit described in the following article. If you already tried the fixit even before that I ask of you rerun the fixit.

    How to reset the Windows Update components?

    http://support.Microsoft.com/kb/971058/en-us#LetMeFixItMyselfAlways

    Step 2

    Try to follow the steps in the Microsoft Article and check if it helps.

    Problems with installing updates

    http://Windows.Microsoft.com/en-us/Windows/troubleshoot-problems-installing-updates#1TC=Windows-7

    Method 3

    If after completing the two steps issue persists trying to follow the steps described in the following Microsoft article different methods.

    Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2

    http://support.Microsoft.com/kb/2509997

    Registry warning: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

    You can use the following link to back up and restore the registry in Windows: http://support.microsoft.com/kb/322756/

    Important:

    Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

    Additional information:

    You can also refer to the following Microsoft article for more details on the update (KB2929437) .

    Description of the update of security for Internet Explorer 11 on Windows 7 and Windows Server 2008 R2: April 8, 2014

    http://support.Microsoft.com/kb/2929437/en-us

    I hope this helps. If the problem still persists, post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

    Thank you.

  • Satellite A100-490: support dual channel?

    Hello!

    I would like to know if my Toshiba laptop supports Dual Channel.

    Satellite A100-490
    Modell Nr.: PSAA9E-17P04JGR

    Best regards
    Kaan

    Of course this phone supports memory dual channel (DDR2)

    The laptop supports DDR2 667 MHz (PC2-5300) 200 - PIN SODIMM memory modules. It s certainly channel.
    http://www.orcalogic.co.UK/ASP/ProdType.asp?ProdType=29716&ft=m&St=3

    Good bye

  • Any warranty on Toshiba Satellite C70-C-199

    Hello

    I have a Toshiba Satellite C70 - C - 11 L half a year to Emag, Bucharest, Romania.

    I bought both it of Toshiba laptop and who are also to benefit from the guarantee that no matter what guarantee.

    3 weeks ago, it crashed, I sent him to a service allowed to Bucharest, Depanero Service.

    Their response was that is the faulty motherboard.

    I asked recover my data from the hard drive, because the storage is ok, it is not affected.

    But they said that the guarantee no matter what does not cover this.

    It is right, it is possible to be like this?

    Please check BIT ANY CE WHO GUARANTEE PROMOTION, TrustToshiba.pdf, it is very important for me.

    I was very shocked when I found.
    Depanero it is a Toshiba authorized Service partners, they require a fee for the DATA RECOVERY.

    Thanks in advance,
    Gabriel Popa

    My laptop has been with Toshiba repair now for more than 4 weeks. He apparently has a faulty motherboard. They say that Toshiba has no motherboards and cannot give me any estimate of when I get my laptop back. They charged me close to £100 because one of the bosses live had broken probably due to excessive torque when it is assembled. They said he had been abandoned, but has refused to provide proof of this. They say it's what Toshiba has said to do. Toshiba says it is Toshiba repair. Bottom line is that Toshiba is zero. I will never buy another machine of their share waste service after sale.

  • Satellite A45-S150 starts windows - safe mode is not possible

    My machine locked upward and when restarted, that asked me to make a selection among several options. Safe mode, safe mode network, prompt mode without failure, recent well known parameters and then just windows. It starts windows in these modes. Any help would be appreciated.

    Brad

    What to say Brad. It seems the full Windows XP operating system has crashed!
    Believe me, something like what is happening simply and I think that it s nothing unusual to anyone who use and works with Windows OS for a long time.

    You should definitely try to reinstall the OS from the Toshiba restore CD.
    But this procedure will format your HARD drive and you will lose all files stored on the HARD drive.

    But this is only one possibility to get Windows running on this laptop.

    Check it out buddy!

  • Satellite C70-B-306 - local network connection does not work

    Hello

    I have a problem with my internet connection, Wi - Fi works fine but when I put the cable with connector rj45 of the connection does not work.
    I see that my laptop want to connect but then the connection is lost again en it says cable is not connected. Who goes on and out.

    It passes between the cable and internet Wi - Fi connection. The cable worked fine on my desktop.
    What can I do? I have the laptop 1 week.

    René

    Hello

    What model of laptop do you have? Do you use the laptop with the original operating system preinstalled?

    Open Device Manager and check if the LAN CSA is listed and enabled correctly.

  • Satellite a200-1GH: the file 'setupdiu.exe' is not marked for installation

    I have Toshiba Satellite a200-1GH and Windows XP Professional SP2 Rus

    I have download the latest battery Bluetooth toshiba downloads.

    Installation process has not finished, there is a mistake.

    How can I solve this problem?

    Remove the old BT battery, clean the registry with a 3rd party tool i.e CCLeaner and then try to run the BT facility.

    Good luck

  • Satellite L300 14 c: driver download link does not work for XP

    Hello!

    From the 19/05/2008, Windows XP compatible drivers & utilities launched by TOSHIBA, I try to download the same.

    But I am facing a common error for each download "Page is not found... "as if the source files are not all present or URL is wrong!

    Also, I could not see any link to report this problem to the administrator of the Site!

    Is one out there facing similar problem with the Satellite L3xx XP drivers?

    (These sites also take a lot of time to refresh / load, it is a common observation?)

    same thing here... the links do not work!

  • DW CS5.5 and 8.1 of Windows - very slow dw & design mode does not work for 1 Web site

    Hello

    I use DW CS5.5 and 8.1 of Windows on a PC. The PC has a lot of memory and power. I use DW 5.5 for the manufacturing and Assembly of Web sites. My laptop has a 17 inch screen. For a site specific Web I have change, page not in 'Design view' without going to "Live View". Also for this one site, DW5.5 is very, very slow and unresponsive. The site is great but has not much JavaScript which would slow down so much performance. I won't change the preferences registry because it is the only site that I'm working on that has this problem. If you answer, please be very clear and explicit in the steps I have to take. Thanks in advance for your help and support. Sorry that the wrong title was on my post.

    The first thing I would do, because it seems to only be one site, is this site 'wrong' for html errors. Run the validator at http://validator.w3.org/nu and clean up all the errors that it finds.

  • These RAM modules will run in mode dual channel - Satellite A100?

    I have the Satellite A100 that supports dual channel.
    HYNIX HYMP512S64BP8-C4 (original modul memory supplied with the laptop)

    http://www.Hynix.com/datasheet/PDF/module/ds_512M_DDR2(B-ver) based_SO-DIMM (Rev0.2) .pdf

    and this kingston kvr533d2s4 / 1024 mb

    http://www.ValueRAM.com/datasheets/KVR533D2S4_1G.PDF

    They both non ECC unbuffered cl4 200pins 533 mHz ddr2 sodimm 1 GB but the TRA and tRC timings seem a little different.
    These modules of memory will work in dual channel mode?

    You will be very happy if someone As the same model of laptop and exactly these modules. I just recommend using modules of RAM recommended. These modules are tested and you will have no problem of compatibility.

    Kingston modules are very good quality products, and I believe that no one reported any compatibility problem. If you visit the Kingston's support page you can find all module compatible with your laptop.

    Check it on
    http://www.EC.Kingston.com/Ecom/configurator_new/mfrmod.asp?root=UK&LinkBack=http :// www.kingston.com/ukroot

  • Is 2 x 1 GB memory supports dual channel on Satellite Pro M70?

    Hello

    I was wondering if I can wquip my M70 with 2 x 1 GB of RAM running in Dual channel mode? Seller is sure it should work, but as I found no info on the pages of toshiba, I would rather confirm here.

    THX in advance

    Hello

    The seller was right. The Satellite Pro M70 supports DDR2 memory modules. These modules are dual channel.
    You can upgrade the memory up to max 2048 MB (2 x 1024 MB)

    Greetings

  • Satellite M70 376 Dual Channel Ram?

    Hello
    I want to know who my Satellite M70 376 has Dual Channel Ram?

    Hello

    I can confirm the information that the laptop uses and is compatible with DDR memory modules.
    As far as I know there should be 2 memory banks that allow you to insert two modules.
    As mentioned, you might improve memory to max 2048 MB of ram. (2x1024Mo)

    Greetings to all ;)

  • HP 15-af153ur: is dual channel ready? 15 - af153ur

    Morning!
    (Card mother, cpu or something else) take in dual-channel mode memory?
    I am trying to set up two identical memory sticks, but cpu - z always indicates that the memory works in single channel.
    The same memory sticks worked quite good in double channel on the other laptop.
    I tried to set up two identical sticks of laptop (both are 15-af153ur), and there is also no effect.

    Could you help with it?

    Thank you

    Michael

    Hello

    It supports the dual channel, given that the processor of AMD E2-6110 memory controller has only a single channel for both RAM memory modules (DIMM)

    http://www.CPU-world.com/CPUs/PUMA/AMD-E2-series%20E2-6110.html

    Memory controllerThe number of controllers: 1
    Memory channels: 1
    Width (in bits) of the channel: 64
    Memory support: DDR3L-1600
    DIMMs per channel: 2

Maybe you are looking for

  • Connect wifi for stolen iPod Touch, lost mode

    My son's iPod touch was stolen yesterday. Put us in lost mode (and communicated with the police), but my question is about the wifi connection. My thought is that there is no chance of track us, given that the iPod can not be connected to wifi, unles

  • table management

    What I want to do. Extract a single dimension of a two dimension table in a new table to a dimension. Check out each item eighth in a calculation to construct a new table to a dimension. Use the new table built above to calculate two new values in tw

  • DELETE OLD SKYDRIVE DOCUMENTS HOW?

    I have 6.99 GB left on my Skydrive. I want to delete some old files so I have enough room to finish my documents. I can remove them and if so, how? THX Kim

  • R400 - am I the only one? Laughing out loud

    I see a lot here on the old series edition r. but I don't seem to see anyone with the newest of r400. I just bought one and I was wondering what other people who already think about it. Unfortunately, there is not much comment or something on the r40

  • Callback thread will not end, problem with CNVDisposeData?

    I have a problem with a thread of reminder on a RT system. I work with CVI 8.5 on the pc and the engine Runtime 9.0 on the RT system. I use a client-server architecture, the client writes data to a network 1 d variable, the server is informed via a c