Satellite C75 - Performace problems after recovery

Similar Questions

• Re: Satellite L500D - boot problem after BIOS update

  I downloaded the new version of BIOS (v1.4) official Toshiba site to update my computer Satellite L500D (PSLK0A - 00U009). But after the update, Windows 7 cannot start, Windows logo appears for a while then it restarts automatically. Windows then goes into repair mode. I followed the instructions on the screen to fix. But it does not work.
  When I reinstalled Windows, the computer worked fine until Windows Update told me to restart the computer. The computer dies again.

  I think that this version of BIOS has a problem. I wonder if there is a way to downgrade the BIOS to the earlier version. I found some instructions on the net to use the Phoenix recovery disk, but I have no file disk and BIOS.
  Please Please HELP, very appreciate.

  TKS

  Try to install the OS to help original Toshiba recovery image. After disabling automatic Microsoft updates to install. When you get the message about controlled initially available updates and install important updates only.

  Check it once more to see if the same thing will happen again. Display the results.

• Satellite C870-12F - problems after BSOD

  Hello

  Well 15 minutes ago, I worked very well with my laptop computer and all of a sudden, I get the bsod... ?

  Then it restarts and after waiting 5 minutes for the windows screen to disappear to a welcome screen, it does not appear... So I tried the recovery.

  NA not work it gave me an error... While writing on this subject all of a sudden he started through the office...

  How is that even possible...

  There are two possible reasons why BSODS happen.

  (1) serious software problem
  (2) hardware problem / fault

  In the case of point 1) system recovery / laptop should solve this problem. But it doesn't have t
  So, I think that, in your case, the material started to malfunction.

  You want to know what part might not work.
  Well, I think that these details can be provided only by an engineer who has already checked the aircraft and ran some diagnostic software.

  In my opinion its HARD drive problem isn't. If something's HARD drive, unit turns on properly but would not boot the system.
  Possible hardware parts that could be affected are: module of RAM or the motherboard.

  RAM problems can be solved easily in replacement of the module, but for motherboard problems, the fix for laptop can be very expensive in case the warranty isn't valid.

• Satellite X 200 - 1AA - after recovery, I have the older version of BIOS?

  I've recently updated the BIOS of my Toshiba Satellite X 200 1AA with Windows Vista SP! After a few days, I did a product recovery using the recovery CD. When the recovery is performed, the BIOS back to the previous version?

  Hello!

  No, the BIOS don't go back to the previous version. The Toshiba Recovery disk contains factory settings of software on your laptop and not the BIOS. The BIOS has nothing to do with the software on your laptop.

  So Don t worry, the recovery disk doesn t touch the BIOS and you still have the new version.

  Good bye

• Satellite A300D keyboard problem after using an external USB keyboard

  I use a Satellite A300D series laptop and while at home, I use a UBS keyboard on it, but once the laptop is used without a USB keyboard only some of the keys seem to work, I get number 6 when I press the i key.

  I thought that this could be because the USB keyboard would not have been arrested properaly when I unplugged and the portable thought he was always there, but even after the stop of the USB keyboard is the same!

  All the answers to my problem?

  Hello

  On my Satellite A300, I can get 3 when I press L. It can be done if you are using the FN + F11 key combination.
  Perhaps this option enabled on your laptop?

• Satellite C850 - Bluetooth problem after update Win 10

  Hello
  I use a Toshiba satellite laptop. Model number Satellite C850 PSC74G-010001.
  Windows Pro 64 bit version 10 installed... After this my bluetooth does not work...

  When I tried to update, it does not work... Realtek Bluetooth 4.0 display Module does not work... bluetooth option in setting is totally gone... wht should I do? ........

  Nobody seems to have any answers do Nathaniel? Pathetic.

• Satellite L730 - Bluetooth problem after upgrade to Windows 10

  Hello. I use a portable Satellite L730 and the only thing that would prevent me from upgrading to Windows 10 is the problem of Bluetooth. RFHID, RFCOMM and RFBUS will not work properly because there are no drivers. Apart from that, the computer there is no requirement of meeting problem Windows 10.

  So is it possible that a sollution to this problem will be provided anytime soon?

  Hello

  In most cases, BT does not work due to lack of BT software.
  The point is that most laptops use a module for WLan and BT.
  This combo module WLan/BT requires additional driver filter...

  According to your WLan / module BT, you will need to install the filter for the BT driver package.
  In most cases the 8 Win / filter package 8.1 Bluetooth driver should work under Win 10...

  But you have to watch for the manufacturer of modules... There are different modules like Atheros, Intel or Realtek

• Satellite 1110-Z15: problem with Recovery CD and DVD player

  I currently have a Satellite 1110 model number PS111E-006R8-EN/S1110-Z15.
  But a few weeks ago, my DVD Rom drive no longer works, it would not run properly when a cd is inserted it kind of Jolt and then arrested and continues to do the same. Anyway to cut a long story short, I tried to rebuild the system by using a version of windows xp that has been successful, it is now, I found the original recovery disks, but without using the cd drive inward, I had recourse to an external cd drive freecom, I hold the c key at startup , but nothing happens, can anyone help emergency
  PS: I made the changes in the Bios to boot from the cd drive

  Hi nichollsr,

  in our society, we have 2 Satellite 1110-Z15, and there is a delicate hint for recovery.

  Toshiba has made a small mistake and printed the wrong order on the CD. You only need to change the order of the Recovery CD. No.. 1 is no. 2 and vice versa.

  Insert the diskette n ° 2, hold down the 'C' key and the recovery is expected to begin. If your laptop does not identify external drive-Freecom CD try to hold the 'U' key to boot from USB.

  I found a FAQ on the site of Toshiba UK

  http://UK.computers.Toshiba-Europe.com

  You must click on Support / download, then to the knowledge base and search for a called FAQ

  'TIU0000002559 '.

  There is a detailed explanation of this issue.

  Goodbye, TOK

  PS: Do not forget to reward points, I'm a Pointcatcher!

• Tecra M8-S8011X - a few problems after recovery

  Hello

  I was wondering if anyone can help.
  This has been driving me crazy for a few weeks now.

  I have the above model and will give it to my cousin who start College and used the recovery DVDs created when I bought it all first to restore the system to a fresh out of the box state.

  The installation went well, I was invited for two recovery DVDs. The DVD Apps & drivers has not been requested or necessary.

  At the first boot of Windows XP but I had a few problems - every time Windows starts up I get a box with the title 'WARNING' and the message: ' cannot Access Volume Control! "my only choice is to hit"OK ".

  In fact all of the sound card is not found at all - in device manager only codecs are listed under devices Audio Audio Realtek High definition or whatever it is supposed to be is not listed at all - no exclamation point, no Red Cross, the system can't even it's supposed to be there.

  I tried to re - install the driver by downloading it from the site, tried DVD drivers, tried to install it manually too Toshiba and Apps... Nothing - the system never recognize it - so I have no sound.

  Also first when Windows starts the "new hardware device" Assistant come to ask to install drivers for a "PCI memory controller" - I did this 'automatically' and manually and connected to the internet and it even manually to the file where I extracted the driver files for the Intel chipset (also downloaded from the page download driver model) - manually but it always ended said that he did find the correct drivers for the hardware...

  Just for the heck of it I have re-directed the recovery discs from scratch in case something was wrong the first time - but it's the same exact results... I find myself with no noise, the error of the volume control and the list in Device Manager that the PCI memory controller cannot start becaue it doesn't have the correct drivers.

  The only information listed under it is:
  Feature: unknown
  Manufacturer: unknown
  Location: PCI Bus 2, device 0, function 0

  Any help would be greatly appreciated, thank you!

  Hello

  All I think that this is not a European model of Toshiba and that is why I first know whether the Win XP should be preinstalled.
  I think that the Vista must be preinstalled and that is why I am asking about the Win XP on this laptop however

  Just something about your problems;
  The audio problem is known to me using Win XP.
  Needs 2 Realtek sound card windows XP hotfixes/patches.
  You need to first install the AUDIO KB888111 patch before KB835221 will follow you with the Realtek audio driver installation.

  According to the memory controller PCI.
  This feature is supported only by the Vista operating system and therefore the Win XP drivers are not available

  Welcome them

• Satellite A205-S5831 - problems after XP downgrad

  Hello

  I am an Indian engineer
  I brought a brand new Toshiba Satellite A205-S5831 us country.
  Sound have Windows Vista Home Premium. But I have this downgrade to WinXP SP2 (pirates)
  His work nice but have a few following problem!

  (1) book suddenly stop treatment in working time and shows a blue screen-... His show at the last line that - Technical Support.
  Its happen 3 - 4 times in 4 months and when I restart the notebook and then its working properly

  (2) my Bluetooth does not work - I have already installed - Blutooh battery and monitor also and even for WI - FI and LAN wireless... etc. Nothing works.
  (3) speed is very slow in everything like in the Installation and other things - I use Visual Studio.net2005, SQL server2000
  (4) problem when Internet access... very slow
  (5) all other application like audio, drivers and silent acoustics etc.. But above all are not working do not and do not have

  Please answer me as soon as possible
  All drivers are Windows XP for Toshiba Notebook. Tell me any website that provide all the XP drivers.
  I download maximum application of www.csd.toshiba.com...

  Please help me

  Hello

  As I see that you posted several discussions on the same issues. I imagine that you are not happy because of all these issues.
  (1) what to write about BSOD? Nobody here can say with certainty why this happen. As you know, it may be because of some software pre-installed. Who knows what you have installed on your laptop? Accurate diagnosis is definitely not possible.
  (2) install all the missing drivers, Toshiba tools and utilities. Each of them should be available on the Toshiba U.S. support page.
  (3) in this regard, we can only speculate. The fact is that this model of laptop pre-installed with Windows XP Home edition and optimized operating system should work well and smoothly.
  (4) I don't know what answer you expect on this subject. Make sure that the network adapter is properly installed. All others you must clarify with network administrator in your company or your Internet service provider
  (5) no comments for this.

  If you have a model of cell phone US Download all the stuff of http://www.csd.toshiba.com/cgi-bin/tais/su/su_sc_modSel.jsp

  Boyfriend sorry but that's all I can say to all this.

• Satellite p300-212 problems after downgrade to xp (yellow? and!)

  Hello

  I had the same problem as the guy FOM this thread---> [http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=174977𪮁 | http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=174977𪮁]
  I lowered my Satellite P300-212 from Vista to XP. I used an installation Win XP CD of Win professional XP including Service Pack 3.
  Then I installed all the drivers from the Toshiba site.
  But I still have a yellow! in the Device Manager to the "Audio device on High Definition Bus". The details of this device show "HDAUDIO\FUNC_01 & VEN_1002 & DEV_AA01 & SUBSYS_00AA0100 & REV_1001\5 & 3B6F18F1 & 0 & 0001"
  So I don't know, what driver I need to take to solve this problem. Rather, modemdriver etc are all installed and work fine!
  In the thread I linked above, the guy only has not copied driver WICH he installed manually. :(

  I hope that someone of you can help!

  Best wishes.

  greatwolfman

  Hello

  You should go to remove device manager and scream this device with the yellow! and?
  Restart the unit.

  In addition you must update Win XP for the last State because there are many patches that are required under Win XP latest series laptop.

• Satellite A200-10 X - after recovery, I can't use FN keys

  Due to some bugs used recovery of my companion CD and lost all the options of "FN"-connected including key gamma\brightness amplify. "." How can I make it back to normal?
  Couse now it looks as if the battery is low: P

  Searched all over the options and still can not find how to restore its original luster...

  PS: Sorry for my poor English :)
  If there is a solution to my problem please post here or send me an Email: [[email protected]]
  THX 4 Help =)

  Recovery of a disc using another model is discouraged, it can cause all sorts of problems and instability.

  Did you install Vista? If Yes, then you must install the package of value added on the Toshiba site.

• Satellite 2210CDT: two problems after installing Win XP

  Hello! Maby it sounds funny but I found Toshiba Satellite 2210CDT inside my closet, installed Windows XP (oem supplied with the mouse, I bought some time ago) and it works!
  The only problems I have are:
  * When the system is in hibernation, it is impossible to 'wake up' (I remmember in Win98 in this laptop there is problem);
  * I don't really have the tools provided with Win98 came with the laptop (ie.battery status and so...)

  Appreciate the help, Mike

  PS sorry if I post in a bad place in the forum, but this is my first post (I hope you can understend...)

  Hello

  Satellite 2210CDT is an ancient and you should be lucky that Windows XP runs on you laptop.
  But this unit has been designed and delivered before the era Windows XP started.
  I checked the page of the Toshiba driver and there is no drivers for Windows XP. I found drivers only for W2k and Win98.
  Unfortunately, if you use the Win XP on your laptop you must do without drivers Toshiba, tools and utilities.

  I found a utility to do Hibernation for Win98 on the Toshiba site. I think that this is a utility that is important to use the hibernation mode. But as I said, it is available for Win98.

• Big problem after recovery try upgrading the firmware, now I have "POWER OFF".

  Hello

  Today, I tried to upgrade the Palm PLUS my new Z2 firmware, unfortunately something wrong with the PC and USB disconnected, after this I tried to bowl of Z2 SUS recovery still once and I completed the restore and update, but now I have an error!

  

  How can I solve? Pls help me! Phone has 5 days!

  
  

  It's quite strange, but sorry to say this, but you have to stop by your local Sony Xperia care

  http://www.sonymobile.com/global-en/support/contact-us/

• Satellite L50D - Boot problems after replacing the hard drive

  I just upgraded my hard drive of the pathetic crod 5400 they provide to a SSHD@7200rpm, but now have a major issue.

  I initially image the operating system from the old hard drive to the new drive and have had chronic start-up problems (1-3-4 attempts to start to succeed if it fails at any time (often to the Toshiba start screen)).

  I reinstalled from a drive under Win 8.1 plain own ENT (trying to avoid the bloatware) and it is exactly the same number and is what I used to format the laptop very well with previously and had previously worked.

  I tried reformatting and reinstalling (by removing all partitions on each attempt) to the CSM, unsafe UEFI and UEFI secure. MCS is a straight line never works not proceed and both UEFI methods have the same exact result.

  I tried with original restore disks and it seems to work (not had time to fully test) but I don't want the bloatware and it shouldn't be serious since, if I were a customer who forgot to make restore disks (too often) and just have to have a failed hard drive or replaced sacrificed the laptop would be now a door stop.

  This seems as bad as Apple to lock people in.

  So I would appreciate ideas of people to please, I don't know if there is a program that is supposed to take place on a new drive as PS3 etc (I doubt it), but that leads me into the wall, and will be the last time that I consider Toshiba as anything other than a joke, if there is no solution.

  I had to replace the hard disks many times in my previous Toshiba laptops and were devoid of this crod, it has something to do with UEFI which seems more a nuisance than a help right now.

  TIA.

  Hello

  In my opinion, you should first check if the startup problem is related to the new installed HARD drive or new installed system.
  You said that the laptop fails to start up often to the Toshiba start screen.

  The splash screen appears during the POST (power on self-test) procedure. During this test, the material will be checked.
  I m wondering if the hybrid SSD/HDD isn't recognised by the BIOS during this particular step.

  From my point of few, this could be the reason why the system cannot be started.

  Another important note:
  The 8.1 win requires enable start secure as well as the UEFI boot mode.
  Therefore, you must enable both options in the BIOS.

  Last but not least check if you are using the latest BIOS version as latest firmware for the hybrid SSD/HDD