Satellite C850-1NU - BSOD with Page fault in non paged area error
So basically I was looking through the web on my laptop, and then suddenly I got a blue screen of death.
It said Page fault in nonpaged area.
Some people say it means that the RAM could be faulty.
Is this true and if it is faulty should I take it back to PC world where I bought it?
Thanks ;)
Hello
The BSOD could be caused by system problems or malfunction of the equipment.
.. and Yes; the BSOD containing the paginated Page Fault in any area error could be related to memory problems, but it could also be a temporal problem that appeared one last time
But if this BSOD will appear in the future for the umpteenth time, I recommend you contact the service partner to verify the material.
Tags: Toshiba
Similar Questions
-
PAGE FAULT IN NON PAGED AREA and IRQL not less or equal
I left my computer on overnight to come on this morning to find the blue screen of death saying IRQL not less or equal - I tried access through safe mode, but I get PAGE FAULT IN NON PAGED AREA. I tried and it was crossed by the last setting but I just got IRQL not less or equal - it's the next day, I quit a game on last night though.
Edit: I can't quite
Have you recently updated the video driver or a service update update it? Try restarting with the VGA driver or last known good configuration.
Tom
-
Hello
I am running Windows 8 on my PC and have seen the Failure of Page in the nonpaged area error when starting and stopping down a few times.
Recently, she was accompanied by an attempt to write a readonly database error starting up, which led to several auto-redémarre.
Here is the link to download the Minidump files on my computer, if that would help.
http://1drv.Ms/1nOJ8If
Please guide me how to on this subject.
Thanks in advance,
Rohan
Rohan
These related to the 802.11 Wireless netr28x.sys adapt Driver Ralink Technology, Corp.. I would setup the possible latest driver even if it is the same date that drivers become corrupt
Microsoft (R) Windows debug 6.3.9600.17029 AMD64 Version
Copyright (c) Microsoft Corporation. All rights reserved.Loading file Dump [C:\Users\Ken\Desktop\New folder\061814-23656 - 01.dmp]
The mini kernel dump file: only registers and the trace of the stack are availableSymbol of validation of the path summary *.
Location of response time (ms)
C:\Users\Ken\Desktop OKSymbol of validation of the path summary *.
Location of response time (ms)
Deferred SRV * H:\symbols* http://msdl.microsoft.com/download/symbols
Symbol search path is: SRV * H:\symbols* http://msdl.microsoft.com/download/symbols
Executable search path is: C:\Users\Ken\Desktop
Windows 8 Kernel Version 9200 MP (4 procs) free x 64
Product: WinNt, suite: TerminalServer personal TerminalServer
By: 9200.16864.amd64fre.win8_gdr.140309 - 1509
Computer name:
Core = 0xfffff801 'f0c1b000 PsLoadedModuleList = 0xfffff801' f0ee7aa0
The debugging session: Wed Jun 18 03:25:39.915 2014 (UTC - 04:00)
System Uptime: 0 days 0:00:10.667
Loading the kernel symbols
..Press (cdb, ntsd, kd) ctrl-c or ctrl-BREAK (windbg) to drop the charges of symbol that take too much time.
Run! SYM noisy before .reload to track symbols loading issues..............................................................
................................................................
...
Loading user symbols
Loading unloaded module list
.....
*******************************************************************************
* *
* Bugcheck analysis *.
* *
*******************************************************************************Use! analyze - v to obtain detailed debugging information.
Bugcheck 50, {fffff88003a1e000, 1, fffff8800529b442, 0}
WARNING: Unable to verify timestamp for netr28x.sys
ERROR: Module load completed but symbols can be loaded for netr28x.sysCould not read the name of the problem driver
Probably caused by: netr28x.sys (netr28x + 3e442)Follow-up: MachineOwner
---------0: kd >! analyze - v
*******************************************************************************
* *
* Bugcheck analysis *.
* *
*******************************************************************************PAGE_FAULT_IN_NONPAGED_AREA (50)
Invalid system memory was referenced. This cannot be protected by try-except,
It must be protected by a probe. In general, the address is simple bad or it
pointing to freed memory.
Arguments:
Arg1: fffff88003a1e000, memory referenced.
Arg2: 0000000000000001, value 0 = read operation, 1 = write operation.
Arg3: fffff8800529b442, if not zero, the address of the instruction that refers to bad memory
address.
Arg4: 0000000000000000, (reserved)Debugging information:
------------------Could not read the name of the problem driver
DUMP_FILE_ATTRIBUTES: 0X8
Generated Triage of the kernel imageWRITE_ADDRESS: GetPointerFromAddress: unable to read from fffff801f0f73168
GetUlongFromAddress: cannot read fffff801f0f731f8
fffff88003a1e000 non paged poolFAULTING_IP:
netr28x + 3e442
fffff880'0529 b 442 c7800000040080000000 mov dword ptr [rax + 40000 h], 80 hMM_INTERNAL_CODE: 0
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT
BUGCHECK_STR: AV
Nom_processus: System
CURRENT_IRQL: 0
ANALYSIS_VERSION: 6.3.9600.17029 (debuggers (dbg). 140219-1702) amd64fre
TRAP_FRAME: fffff88000b89230-(.trap 0xfffff88000b89230)
NOTE: The frame trap does contain not all registers.
Some registry values can be set to zero or incorrect.
Rax = fffff880039de000 rbx = 0000000000000000 rcx = 0000000000000282
RDX = a 0000000 00000000 rsi = 0000000000000000 rdi = 0000000000000000
RIP = fffff8800529b442 rsp = fffff88000b893c0 rbp = fffff88000b89540
R8 = 0000000000000001 r9 = 0000000000000114 = 0000000000000000 r10
R11 = fffff88000b89380 r12 = 0000000000000000 r13 = 0000000000000000
R14 = 0000000000000000 r15 = 0000000000000000
iopl = 0 nv up ei pl zr po nc
netr28x + 0x3e442:
fffff880 ' 0529b 442 c7800000040080000000 mov dword ptr [rax + 40000 h], 80 h ds:fffff880 ' 03a1e000 =?
Reset the default scopeLAST_CONTROL_TRANSFER: from fffff801f0d363e5 to fffff801f0c75440
STACK_TEXT:
fffff880 '00b 89048 fffff801' f0d363e5: 00000000'00000050 fffff880 '03a1e000 00000000 00000001' fffff880' 00b 89230: nt! KeBugCheckEx
fffff880 '00b 89050 fffff801' f0cafb2b: 00000000 00000001 "fffff880 '03a1e000 fffffa80' 0730eb00 fffff8a0'00000001: nt! : FNODOBFM: 'string' + 0x33c2b
"fffff880 '00b890f0 fffff801' f0c72eee: 00000000 ' 00000001 fffffa80 ' b 0, 200000 fffff880 '00b 89400 fffff880' 00b 89230: nt! MmAccessFault + 0x55b
fffff880 '00b 89230 fffff880' 0529b 442: fffffa80'0 b 200000 fffffa80 '0b 200000 fffff880' 00b 89540 ffffffff'ffffffff: nt! KiPageFault + 0x16e
fffff880 '00b893c0 fffffa80' b 0, 200000: fffffa80 '0b 200000 fffff880' 00b 89540 ffffffff'ffffffff 00000000' 00000000: netr28x + 0x3e442
fffff880 '00b893c8 fffffa80' b 0, 200000: fffff880'00 b 89540 ffffffff'ffffffff 00000000 00000000' fffff880'05291007: 0xfffffa80'0 b 200000
fffff880 '00b893d0 fffff880' 00b 89540: ffffffff'ffffffff 00000000 00000000' fffff880'05291007 00000000 00000000': 0xfffffa80'0 b 200000
fffff880 '00b893d8 ffffffff' ffffffff: 00000000 00000000' fffff880'05291007 00000000 '00000000 00000000' 00000000: 0xfffff880'00 b 89540
"fffff880'00b893e0 00000000' 00000000: fffff880 ' 05291007 00000000 '00000000 00000000' 00000000 fffffa80 ' b 0, 200000: 0xffffffff'ffffffffSTACK_COMMAND: kb
FOLLOWUP_IP:
netr28x + 3e442
fffff880'0529 b 442 c7800000040080000000 mov dword ptr [rax + 40000 h], 80 hSYMBOL_STACK_INDEX: 4
SYMBOL_NAME: netr28x + 3e442
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: netr28x
Nom_image: netr28x.sys
DEBUG_FLR_IMAGE_TIMESTAMP: 531982e8
FAILURE_BUCKET_ID: AV_netr28x + 3e442
BUCKET_ID: AV_netr28x + 3e442
ANALYSIS_SOURCE: KM
FAILURE_ID_HASH_STRING: km:av_netr28x + 3e442
FAILURE_ID_HASH: {5c6cc3bb-48d3-d6cb-422b-45f5619bcc52}
Follow-up: MachineOwner
--------- -
I have the same problem with my 32-bit vista, I checked the memory diagnostics and the material is 100% ok, but I can't clean to start windows after updates yesterday (Nothing helps to: No. safe mod or any of that). Please your answer was very comprehensive and detailed for the xp thing, help me with vista (I oc original and I am a telecommuter, so I desperately need my computer fixed at the rear).
Potatis,
Here is an article which covers the removal of updates through the command prompt. Hope this is what you are looking for.
Command line switches to eat the package
Mike - Engineer Support Microsoft Answers
Visit our Microsoft answers feedback Forum and let us know what you think. -
Gettings error message: error in the non paged area error page
I have a Satellite M45-S265 with Windows XP. Even if I moved abroad and then went home, I haven't lost my recovery CD!
However, my computer went to compensation under a policy of service from Best Buy. She returned with a new card, new keyboard, new drive hard (in white), new CD player and I don't know what to another new. I guess the 3rd global environment was pretty hard on this (dust, moisture, heat) so it takes a lot of new things.
Now, when I use the recovery CD, it seems to do everything OK, until he asks me my settings. After settings, it tells me it will reboot and it does, and when she returns to the top he gets a blue screen with the error 'page in the non paged area failure. "
Technical information of the blue screen:
Stop: 0 x 00000050 (0xA9A35A00, 0 x 00000000, 0 x 00000000, 0x805C52BA)
win29a51.sys address A9A35A00, at A9A35A00, date stamp 00000000
When I restart, the windows looks like it will start up. Can I get a pretty little box of windows with the message "the system is not fully installed. Please run Setup again. »
I wonder if the restore CD will not work because there is perhaps now another brand of hard drive on CD here, or different, different determinants?
Best Buy has something wrong or I have to take the computer to them?
Original internet research indicates the problem could be faulty RAM?
What should I do?
Thank you
SusanHi Susan,.
Looks clearly like a related problem of RAM. I recommend to put the machine to a technician and allow it to check the RAM memory, because this fault of page errors occur when something was written into RAM and then if the operating system asks files block in the module memory may not be accessible which causes the above error.
Greetings
-
Blue screen caused by Page fault in non paged error
Hi all
In the last two weeks, I have been doing random BSOD appearing on my computer, as well in case of inactivity or when I use it. I am a novice to understand what could be the cause, so I hope someone here could help me. I downloaded the latest mini dump file here:
https://CID-d01a0330cedf8aef.SkyDrive.live.com/redir.aspx?RESID=D01A0330CEDF8AEF! 105
I would greatly appreciate anyone who could tell me what I can do to fix this.
Thank you!
Hello
If this vuhub.sys is a driver of ASUStek.
ASUStek support
http://support.ASUS.com/ASUStek Forums
http://VIP.ASUS.com/forum/default.aspx?SLanguage=en-usASUStek drivers
http://support.ASUS.com/download/download.aspx?SLanguage=en-usI hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
Satellite C850-1NU - update of Windows 8 is suspended
Hi all
I'm pretty useless with computers so would like some advice.
Yesterday, I bought a Toshiba C850-1NU.
Tonight I tried to run windows updates.The laptop now reads as follows:
"Configuration of Windows features.
15% of full
Do not turn off your computer.He read this message for 40 minutes. After that I turned off manually the laptop using the off button. To turn it on again, it began the process of updating at 0% and is now suspended at 15%.
What we could do about it?
Thank you very much
Theo
You have the Satellite C850-1NU with pre-installed Win 8?
Here is a nice document that helps you fix Windows 8 System.
[Windows 8 recovery & repair | http://aps2.toshiba-tro.de/kb0/TSB2A03ES0000R01.htm] -
Upgrade CPU on Satellite C850-1NU
So I did some research lately on what I can do to upgrade my Satellite C850-1NU.
I'm going to 16 GB of RAM and an SSD, but I thought if it is possible to make a CPUupgrade.
In this laptop motherboard is an Intel PLCSF8 according to CPU - Z, and decision-making is taken 988B rPGA.Then I found one of these on ebay: http://ark.intel.com/products/71465/Intel-Core-i3-3120M-Processor-3M-Cache-2_50-GHz
Then I found a site with something to do with my motherboard: http://browser.primatelabs.com/geekbench3/230190
It is said that the processor is a core i3 3120 m, and it uses the same version of BIOS that I am, so I just want to know, could I buy a 3120 m i3 and put in my Satellite C850-1NU?
I have a Celeron 1000 m at the moment.
:) - TheoHi Theo
Every time when I read the thread on CPU upgrade I m wondering what is the reason for this.
At first, because the CPU upgrade is not supported. There are many reasons why CPU shouldn't be improved. Some of them that you can read on http://aps2.toshiba-tro.de/kb0/TSB9401AX0001R01.htmSecond, there are some hardware upgrades supported as the RAM and SSD that can be done by the owner of the laptop without any type of risk. I don't know what kind of transactions you make on your laptop but the RAM and SSD upgrade should be sufficient to increase the performance of s for laptop.
A few years ago I ve changed CPU on my old P300 (without guarantee) just to see if there is some difference. To be honest no not at all.
In my opinion, you should increase the Ram with memory compatible modules and exchange the SSD HARD drive. After doing this, you will notice the difference. Perform these two steps first and post comments. -
Satellite L30: Vista problems with pages minimizing
Hello
I just bought the computer Satellite L30 toshiba laptop and I'm having problems with pages to minimize whenever I click on the page. Most of the time it happens when I click on the scroll bar, but it also happens when I click on any part of the page and when im typing.
It becomes very annoying. I've only had this laptop for about 2 weeks and the problem has been there since the first day. IM runing Windows Vista Home Basic Edition.
No one knows the cause or how to sort?
Hi maxien
Question very, very extraordinary in my view we need to know if there of something wrong with the hardware or software
You have certainly a few disks; Recovery CD
Then try to reinstall the whole OS again on the operating system and check if the minimization problem
Please come back and report the results -
Satellite P500 PSPE8U: BSOD with Win7
Hello
As Microsoft Windows C++ programmer I have access to the final retail version of Win7, the X 86 and the 64-bit versions of the Professinal build and version of Windows 7 Ultimate have show stopping BSOD errors and so far I had unsuccessfully in looking for it even if I think that I am closing top.
I am hoping that someone more familiar with Toshiba laptops might have seen this problem before and know the fix.
The fault that happens in x 86 & 64-bit, and upgraded or by pure install.
The system is unstable, crash, and or gel and or cause a BSOD with "sdbus.sys", noted as the cause.
The above is a driver installed by Windows and is a signed file MS, who seems to lead the SDHD slot.If someone knows something about this anomaly he can answer it please.
concerning
NicWa result of this. After much trial and error, I discovered if the SD material is disabled in the BSOD and restart Device Manager stops happening. This material is related to the MS sdbus.sys driver, so there is clearly a problem with the MS driver and the Toshiba laptop.
NicW
-
Satellite C850 - found problems with the networking and the FN key
Hey everybody,
I work on a Satellite Toshiba C850, that my parents recently bought and spin in a certain number of questions.
(1) wireless won't connect to my network. Have done the following: verified by connecting on two other computers, reset the router, the open network, reset the map, reinstalled the realtek drivers, checked the settings in the networking of Toshiba Utilities. End result is he's going to try, and fail. Wired LAN works fine.
(2) FN key does not work. Have you checked the region and it is OK, have tried to use the Flash cards - no change, checked with the screen keyboard and can check the FN key does not register.
I noticed that the first problem is common, but there are obvious positive results. If anyone can offer any assistance, I would appreciate it a lot.
Before you begin to discuss your problems can you please tell us what OS you are using?
Are you using the original OS that you got with your laptop? I mean original recovery image has been tested and works correctly, with the factory settings that all should especially the FN keys.1 / What do you mean with refusing? your WLAN is visible for your laptop?
2 / if there is problem with the feature keys FN and you use Win7 try please reinstall extra package from Toshiba.
-
Satellite L755-16U - BSOD with an additional RAM module
Hello everyone.
I bought my toshiba Satellite L755-16U nearly 4 years ago.
This year I decided to buy more memory for my 4 GB,
I bought Kingston SODIMM DDR3-1333 4096 MB PC3-10600 because they have the same characteristics. Since then occasionallyBSOD began to take place. I don't know why.
I checked my drive with chkdsk and checked my memory with memtest86 - no error.
Separately, the two work well in different locations. I'm desperate.Should I buy another a kingstone and try to put in 2 kingstones memories or what should I do?
Hello
According to specifications of the laptop, your machine can handle with 8 GB of RAM, so you can use 2 4 GB of RAM modules.
Compatible 4 GB of RAM has PA3918U-1M4G part number. Part number of Kingston for this RAM module is KTT - S3B / 4G.
That's all I can say on the upgrade memory. -
Satellite L300 - 16L - BSOD with new modules of RAM
Hello
I have a Satellite L300 - 16L and make me the same problem.
Has got 2 x 1 GB DIMMS standard and ordered 2 new 2 GB DIMMS. If I put the 2 new 2 GB DIMMS in I get the BSOD, Memtest also crashes as soon as it starts to test. If I place a 1 GB Dimm in the lower slot and a 2 GB in another windows starts fine, if I try to put the 2 in the lower slot and 1 GB in the higher the BSOD that he.
But if I put either of 2 GB on the lower slot his own windows boots fine, mem test has also allows to test the two GBs 2 individually and said no problem.
Any ideas anyone? My laptop is supposed to support 4 GB, I'm sure of it.
Thank you
JJHi Jack_Jumpin,
> My laptop is supposed to support 4 GB, I'm sure of it.
Why you are sure that your laptop supports 4 GB of RAM?I checked the specification of your laptop on the Toshiba page and this L300 - 16L supports only 2 GB. This means that you can only use two modules including 1 GB of capacity.
Sorry, mate, but you can use t 4 GB. The chipset supports only 2 GB.
-
Satellite C850-1NU - SSD upgrade
I was wondering,
I want to put an SSD in my Tosh. Please could someone send me a link to one that adapts, and and how they are easy to set up?
Thank youIn General, you can use almost all SSDS on the market and change the HARD drive isn't a big deal.
Toshiba offers various SSD and you can pick up some info on http://storage.toshiba.eu/cms/en/index.html
You can of course use SSDs from other manufacturers also. If you have time visit your local dealer and check that SSDS are available and to check prices.After buying one, we can help you with exchange. Let us know if you have one at home. ;)
-
Satellite C850-1NU - Ubuntu 13.10 - weak wifi signal
Hello
Recently, I put Ubuntu 13.10 and after putting on normally where I have my laptop about 5 metres, behind a wall, I used to get 5 bars on other versions of Ubuntu and when she Windows, but now it is sometimes about 5 bars, and then he falls suddenly to 2 or 1.
It's really frustrating, and I'm really confused how this happened.
Help, please!
no response yet :(
Maybe you are looking for
-
What are the causes the download window is no longer the name of file
What is said. The file is downloading, but the name does not appear in the downloads window.
-
Could not load xml - no root node rules
-
Command are not working and MacBook almost inadmissible
My MacBook Pro (2008) becomes extremely inadmissible (constant of spinning ball)... It can sometimes take up to an hour to fully charge my iTunes, if I dare to open any other application then it is just a stand still and I end up doing a hard stop. I
-
My touchpad in 2000 laptop cant be locked... until I got this option... but suudenly when I checked the pad touch control panel option was not there.before I had an icon of the touchpad in the panel.but of control now is not there... here can find it
-
Late in the evolution of the status of the LEDs
Hello I use 6 LEDs in my application. I change the status of the LED using the SetCtrlVal() function. But for 3 LEDS, change happens with a certain delay (delay of about 5 sec). I do not know how to solve in this issue. All me please on this. Thanks