Satellite C850 and win 8 - shift keys not working - no caps i and o

Similar Questions

• SHIFT keys not working in a t420

  Hello world

  My apologies for the lack of capitalzation.

  Suddenly tonight, turning my caps lock key is kept. I would like to press the button, but it wouldn't turn off. After my laptop computer is shut down and restarted, the SHIFT key now works properly, but none of my shift keys work. everything else seems to work very well. I've not spilled something on the keyboard and nothing happened or changed between when it was working fine before and now. What is important, the two shift keys do not work, instead of one, while the rest keys in the area of the two shift keys seem to work fine, so it seems that the problem is some sort of issue with the shift key...

  Thanks in advance for any help people can offer, I really appreciate it.

  It is possible that the keyboard itself is fine and the motherboard went a bit wonky, but will be difficult to diagnose without a motherboard that is well known or known good keyboard.

  I guess you could lift and remove the shift keys and check that it works mechanically (which is likely). Then I would pull out of the rubber dome (need to identify switches) to check the electrical contacts under him and try to fill it directly.

  Any keyboard off of eBay for X 220, {T, W} {4, 5} {1,2} {0, 0 s} will work.

• the two shift keys not working not

  I got an error of streamci.dll earlier today.  to restart, I discovered that my two shift keys were working is no longer.  given that I made experiences... Here's what I tried...

  1. I tried to restart

  2 i tried to uninstall and reinstall the keyboard driver

  3 - my computer is a convertible tablet also, and it has a virtual keyboard.  the shift FUNCTION keys on the virtual keyboard, which told me that the computer itself does entries correctly to the keyboard that assumes the virtual and the real key to the same port.  in any case, I would really like to get this fixed but I'm not sure where to go from here.  Help, please.

  4 - caps lock keys work, but the only way I have access to special characters is through the virt. keyboad

  Thanks, colin

  Hello
  
  a. did you software/hardware changes to your computer before this problem?
  I suggest to try the methods below, one by one and check if that helps.
  Method 1: Try to perform automatic Troubleshooting Services and check out what he has to say.
  http://support.Microsoft.com/GP/hardware_device_problems
  Method 2: Check if the problem persists in safe mode and after the same return. It may also due to some software of third party.
  Reference:
  http://Windows.Microsoft.com/en-us/Windows7/what-is-safe-mode 
  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode
  Method 3: Try an external keyboard and verify if you are able to use the shift keys on it. Send back the same.
  Method 4: If the problem started recently, perform system restore.
  Reference: http://windows.microsoft.com/en-US/windows7/products/features/system-restore

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Shift key not working not

  Hello. I work on Photoshop cc (on Mac) and try to put an object to scale proportionally, but my shift key stopped working. Help please

  The first thing that comes in my mind is to take plastic of the Shift key and clean if necessary. There may be something that prevents him from pushing the button. Another solution is to click on the channel icon in the Options bar just between the letters W and H which will force proportions during the measurement of things in Photoshop. You must enter free transform mode and click the chain icon.

  If you want to scale from the Center and to constrain proportions, then enter the free transform, string check icon, press Alt/Opt, navigate the mouse on the corner handle and start dragging.

  

• Shift key not working not not indesign

  Shift key stopped working. Is no longer lining up when using the online tool.

  So... now I feel like a fool... I restarted my computer, it probably should try that first. It works now. Jackson I hope it works for you as well.

• Presario CQ60 space bar and left SHIFT keys not working not

  the week past some of the letter were alittle unresponsive and then yesterday my left move and SPACEBAR completely qiut working any help would be great. I'm on windows 7 if it is a diffrenance

  Hello

  As you mentioned the left SHIFT key and SPACEBAR does not work it means you need to replace the keyboard, as an alternative, you can use the on-screen keyboard or wired keyboard / wireless. To activate on screen keyboad on windows 7 choose demarrer→ Panel→Ease of Access→Ease to access Center.Click the button start the Visual keyboard.

  Chetan 
  I work on behalf of HP

  Please click on 'Accept as Solution' on the post that solves your problem to help others to find the solution.

  Click on the STAR of CONGRATULATIONS on the left to say 'Thank you' to help!

• Satellite C850 - CD 1 kN burner does not work

  Hello

  I tried to burn CDs on my Satellite C850 - 1 kN with 64-bit Windows 8 and everytime I try it will finish burning the CD without error message or apparent problems but then when you try to play the CD on the laptop or other device, it is read as a blank disc.

  Have you tried to fire using Itunes, Nero and Windows Media player, all with the same result.

  I also tried to use Verbatim and CD Virgin Maxell without change in results.

  I would also add that the CD drive works as it will play another CD.

  Any help with this would be much appreciated.

  Thank you

  Hello

  Are you able to create data CD or DVD?
  I guess you tried to write music data (possibly mp3, mp4 files) on a CD, but try to write files to simple document on a DVD or a CD.

  Also, make sure that the writing session was closed after completed burning the disc.

  Another tip:
  I also recommend to test the discs to another and from different manufacturers.
  You use Verbatim and Maxwell, both are great records but the key is the combination of optical disks and disk drives, so even if others were able to use this disc using another optical disc drive, this does not mean that this drive would be fully compatible with your SIDE. How about TDK R CD/DVD?
  Test it!

• Satellite A200 - 14 d PSAECE - Fn keys not working not not & other function keys

  Hello

  (1) I ask your help on installing my Fn keys drivers for my laptop Satellite A200 14 D PSAECE.
  My OS is Windows XP and I have Bitdefender Internet Security 2009.
  Drivers Toshiba download page, I got all the drivers for my laptop (36 of all - or close), but reinstalations of Xp a lot, I did on my laptop, only after all keys Fn worked when pressing Fn + key and the corresponding icons appeared on my screen. I have read a few forum topics and I understand there's a problem on the order in which I have to install (I already installed all, but it does not work), so I need someone to tell me who are the drivers for the Fn keys only and in what order to install. Don't forget that I can turn off my Bitdefender but not uninstall.

  (2) the same problem with the buttons preset above the keys - start-stop, Internet, Media Player, Play-Stop-Rewind, I need the driver and order.

  Thank you for your time :)
  Sorry if this question is already answer in the forum somewhere, but I couldn't get this exact answer.

  Hello

  I remember that the BIOS must be updated to the version of Win XP on Satellite A200 series.
  There are two different versions of the BIOS and installed (Vista or Win XP) the correct version should be used.

  But there are a lot of FN buttons which requires an additional installation of various tools.
  For example, the Touch Pad on / off Utility must be installed to use the FN + F9 keys.

  In addition, you must install the 3.22.2701 and 2.49.2.5C pilot controls in order to get control of Toshiba functionality of buttons.

• Satellite Pro M30 Win 7 - webcam does not work on msn messenger

  Hi all

  I have a Satellite Pro M30 Modell Nr.: PSM35E and just changed to Windows 7. But put him Nvidia card NVIDIA GeForceTM FX Go5200 Grafik 64 MB of RAM is not working properly.

  I could find a Vista driver and installed, have Aero + photos on the desktop, but my webcam does not work on msn messenger and this is the only way for me to see my family.

  Can someone help me?

  Thanks for your help

  Hello

  I m a bit confused; you have some problems with the graphics card or with the webcam?

  I assume you mean on external webcam connected to the USB port? Right?
  What happens if you connect the webcam to the laptop? Can win 7 recognize the device? Have you installed additional drivers for this webcam?
  Most of the time it s necessary to do so because I think that it s not Plug & Play device.

• Satellite L300 PSLBGE - Win XP - FN does not work

  Hello!
  I just installed Windows XP (sp3) on a satellite L300 PSLBGE by Toshiba... and the FN key does not work.
  At the moment I have to activate bluetooth... but FN + F8 does not work.

  What can I do? I installed Hotkey, save energy and controls (1.0.0.8)...

  FN still does not work. FN + F3 does not activate the option to sleep...
  FN + F8 does not Bluetooth... FN + F6 and Fn + F7 to control brightness... nothing to do.

  Am I the only one having this problem?
  There is no updated BIOS... and it's very frustrating.
  If I press FN the Green led appears under tension... that there is no problem about the keyboard... What can I do?

  I absolutely have TO activate bluetooth... but if I press Fn + F8 it does not work! I want to read someone who have this laptop and told me "I have your satellite L300 PSLBGE 1 b 1 and my bluetooth and my FN button works with Windows XP!" ... maybe he could help me :)

  Thank you very much
  Tier

  Hello

  You need to install the common Module from the Toshiba European page and the FN keys will work!

  Check this box

• SHIFT keys not working not

  SHIFT keys on my laptop are not working. all other keys are working properly. to type capital letters, I use the capslock key. the problem here is that as the hash key, the dollar, the % etc do not work. I've updated the keyboard driver, but the problem still persists. can someone suggest a solution...

  Hello

  ·           What is the number and the model of the laptop?

  ·           When the issue started?

  ·           Have you tried to reinstall the keyboard drivers?

  Step 1: Check if the problem persists in Mode without failure.

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-safe-mode

• Illustrator questions 15.3 - selection tools, Shift key not working not properly

  Hi, my Illustrator started doing strange things, I'll work away and then the Selection tool will decide Exchange with the direct Selection tool or the SHIFT key function will not perform as it should. There is obviously something upsetting, but I don't know what! Any thoughts?

  I use a Wacom Intuos5 (driver is up to date) and I'm on the retina of Macbook pro 15 "/ OSX El Capitan."

  Being on the Mac platform, I am confident that you will be running faster. Let us know if you find what was the cause. Good luck

• InDesign CC: SHIFT KEY not WORKING NOT

  I have a new IMAC and I just upgraded to Indesign CC. the SHIFT key does not objects or text in proportion. The SHIFT key should lock the object to unique size and allow it to be put on the larger scale. It's very frustrating because using the scale tool does not give the same results. I tried everything: I upgraded to Yosemite, I contacted Adobe support (no help, they said I had to re - install my wireless keyboard, I tried and it didn't work), I uninstalled the preferences (trashed their), I uninstalled and reinstalled the program and restart does not work either. I have read other forums about this and I don't have firefox, entourage or quicken currently running on this computer. This Mac is a company computer conencted to its network. Does anyone else have this problem in InDesign CC? Help, please!

  Thank you! My computer was finally able to understand what was wrong. And as you said something was with it all. So from that point he wiped my computer and started from scratch. It downloaded the adobe programs and one at time have begun to add the server and other applications such as Word, Indesign test in the meantime. It took until he loaded the ANTI-VIRUS that controls the keyboard stop working. It turns out that the anti-virus we use called Webroot had a drop of water low called «Secure Pause before keyboard» This was supposed to be checked the and once it turned on my keyboard and quick access keys started working again! So happy that this has finally been resolved, it took months to understand.

• Shift key not working not not after update Indesign CC

  I've just updated Indesign CC and now the SHIFT key does not have his normal rights. Forced propportions, make straight lines, etc. How can I fix it?

  I think that I haven't seen this reported by Mac users. Don't know what the solution is, but you should definitely disable third-party plug-ins to test.

• SHIFT KEY NOT WORKING DO NOT.

  I HAVE A TOSHIBA STANDARD 101/102-KEY OR MICROSOFT NATURAL PS/2.

  WINDOWS XP SP3.

  MY SHIFT KEY DOES NOT WORK.

  you need a new keyboard