Satellite C850 - how to prevent breaking easily the VGA port

Similar Questions

• Satellite P750 - unable to connect an external display via the VGA port

  Hi all

  My problem is the following:

  I tried to connect my P750 (running on W7 x-64) an external display using the VGA cable port. Unfortunately, these devices recognize my phone. Laptop does not recognize the external display, you can see in the graphics settings as additional display, but the screen shows "no signal".

  The computer always identifies the screen correctly, so it seems that there is communication from the screen to the PC, but not the reverse.

  This has been verified with 3 separate screens and television - still the same. All the screens work properly with the other PC.

  I already have:

  -try to play with FN + F5 / "windows" + buttons P - no change
  -install the latest drivers BIOS and video site Web from Toshiba - no change

  Suggestions how to operate? Is it possible that the VGA port is faulty?

  Thank you in advance.

  Hello

  You have the same problems with a HDMI output port?
  Usually, you don't need to change anything to get the external monitor works.
  Press Fn + F5 several times until the monitor RGB (VGA) was selected
  Since you can choose an HDMI output too, you should pay attention to this option.

  Have you tried to change the resolution before using the Fn + F5?
  It s worth a try

  Last but not least, you could set the default BIOS (press F9 BIOS and save the changes by pressing F10). But I don't very well if the BIOS contains some parameters of port RGB (VGA) m

• How to save data from the COM port to file?

  Hi all

  can someone tell me please how to save data from the COM port on file? I transfer 1 byte of serial port... attached is the image of the vi... very basic.

  I would like to save the data in a table... I mean, 1 data--> data--> data tab 2 tab 3rd--> tab

  and so on... can anyone help?

  
  

• TV Toshiba 43SH9UM - no picture but audio using the VGA port

  Hello

  I have a 43SH9UM projection TV.
  But now that I model in research on the Internet don't could not find anything on this TV!

  Please let me user guide to download (I would lose it!)

  I have problems with this TV!
  When I take my laptop with VGA port to connect to a TV, I do not see any image!
  Connect the audio, but I can hear it.

  Thank you

  _Another wire we Forum_
  http://forums.Toshiba.com/T5/televisions/43SH9UM/TD-p/599054

  + Hi +.

  + Thanks for your response. But I think that you're wrong! +

  + Vga port to connect my laptop to my TV, but only at a resolution of 600 x 480 image I saw on TV (480i), but when I change the resolution to a black screen on my TV show. +
  + Who does not automatically go to 1080i. +
  + While this TV supports this resolution! +

  + How can I get my TV in 1080i resolution? +

  + You have the user manual? +

  Thank you

  When you connect the laptop to the TV, the first thing you need to do is to allow certain port on your TV.
  When the VGA port is combination of keys specific use of TV from laptop desk to the external device.

  I don't know what laptop do you have but on most computers Toshiba laptop is FN + F5 key combination. Of course it won't work if the external device is recognized properly.
  Somehow, I think that your TV is not recognized correctly.

  Can you see options to toggle between your laptop and the TV on your laptop?

• Connect external monitor via the VGA port > > BSOD

  Hi all

  I have a laptop Acer Aspire V3-772 and I had an (obvious) problem. When I connect an externel to my VGA port my laptop freezes. After that I restarted my laptop (still connected to the monitor via the VGA input) I get the following BSOD:

  video_tdr_failure igdkmd64.sys

  This error I've read on the internet has nothing to do with the video card intel. On this laptop, there intel 4600 internal videocard. There is also a second video card which is geforce gtx 760 m.

  I updated my system completely and everything works fine. Except the VGA port.

  I tested my HDMI port that works correctly, open the same screen/monitor connected via the VGA input it freezes / BSOD.

  One give me advice on what could be the cause?

  is this hardware or software really? I think that the software. In any case I'll try to install the older version of the video card driver intel. I'll post if it works.

  I would like to have some advice on this issue.

  Thank you!

  Thanks for your reply. I tried already. HDMI works very well but even VGA displayport monitor (so double male vga cable) causes system hang still > BSOD.

  I did a factory reset. Same result.

  Conclusion... Its a hardware problem.
  I'll contact support so they can pick up my laptop for repair.
  I lost my weekend for this problem.

  I'll change this topic as resolved since it's associated mobo (intel grappics card).

• How to prevent spam and the dating of the queries

  How to prevent spam and dating asking to come in my junk mail too much looking forward this junk e-mail

  If the emails are from the same source or have a constant content, you can write a rule in Mail/preferences/Rules. Example below.

  

  

• Satellite C850-B820 - I am looking for the motherboard

  HI, I have laptop computer c850 b820 and I would like to know the name of the motherboard and thank you

  As far as I know the motherboard with V000275540 part number should be compatible with the satellite C850/C855 series.

• Satellite M50: How change it to fix the external antenna for WLan card

  I want to change my M50, so I can join the onboard wireless card external antenna.

  Anyone know of any modding guides?

  Hello

  What do you do exactly?
  What is name of your Satellite M50 - xxx?

  Usually if the notebook is Wlan ready but there is no Wlan installed if it is possible to use a minPCI wireless network card.
  So if you want to install the Wlan card and attach it to the antenna, you must connect the cables.
  A white cable normally goes to the HAND and a black to the auxiliary voltage

• Satellite A660 how can I turn off the light on the power button?

  Hello, I recently bought a new Toshiba A660-1FL.

  However mind, lighting of the multimedia keys, if I work in the dark.
  In the Bios, I could disable the led lighting, but the on/off switch is always lighting, which distracts me when I'm working.
  This laptop has two power LED, so the lighting power is in my view, unnecessary.

  My question is: How can I turn off the light on the power button?

  Hello

  The power button led cannot be disabled.
  It s there if the laptop is turned on.
  The lighting in the BIOS option only controls the multimedia keys...

  Welcome them

• Satellite L650 - no signal on TV via the HDMI port

  Hello

  I have a problem with the HDMI port. I am not able to connect the L650 to my TV. There will be no incoming television signal. The TV port is correct because I can connect my digital camera without any problems. The HDMI port is not displayed in the hardware Manager. I don't use the version of windows 7 that has been installed originally. I formatted the disk and have reinstalled a different version of windows.

  Do I need a special driver to activate the HDMI port? I just installed the ATI catalyst driver. If you would like more information, I'll try to give them as soon as possible.

  Thank you very much for your help

  Hi song2.

  > have reinstalled a different version of windows.
  And what version of Windows you have right now?
  You have yellow exclamation points in the Manager of devices or unknown devices?

  In general there is no driver special HDMI port. If you connect your laptop to TV/monitor external, you must press the FN + F5 key combination to switch between monitors.

  Check it!

• How to connect Portege M700 to TV using the VGA port?

  I bought a VGA S-video/audio adapter and connected my VGA port and the TV.
  Nothing happened.

  In the control panel... no other display/external display was detected.
  Validations only that I ran using an emulator port or something.
  I have the Portege M700 preinstalled with Vista Business lozenges.

  Any ideas would be welcome.
  Thank you

  Hello!

  I have a Portege M700 too and there is no S-video port.

  If you want to switch between the following views the use of FN + F5 as Feliks said. I use the Portege M700 with an external monitor via a VGA cable and it works perfectly.

  Good bye

• Satellite C850 - how to change the boot order in the BIOS?

  Hi guys,.

  I just bought a C850, and KIS2013 has made a recovery on a USB facility. But how do the machine to boot from the stylus, I can't find any way to get into the bios to change the boot order. I have been Googling all day and tried all methods I found recommended, non of which worked.

  Thanks in anticipation,

  Ray

  Proceed to a complete stop and after starting your laptop press F12 again to enter the BOOT menu.
  http://APS2.toshiba-tro.de/KB0/TSB2B03EY0002R01.htm

  You will find the possibility to enter the BIOS settings.

• Satellite C850-13D - error: System cannot find the path specified

  TOSHIBA SATELLITE LAPTOP C850-13D, I BOUGHT IT, I HAD TO BRING IT BACK FOR REPLACEMENT, BECAUSE I COULD NOT INSTALL ANYTHING, I KEPT GETTING ERRORS, LIKE THE ONE I MENTIONED AS A 'SUBJECT' GOLD NSIS ERROR.

  I GET THE SAME ERRORS ON MY NEW LAPTOP. I DON'T KNOW HOW TO FIX IT, I RESEARCH ONLINE AND IT SEEMS THAT EVERYTHING I DO, DOES NOT WORK.

  >... BECAUSE I COULD NOT INSTALL ANYTHING
  > I GET THE SAME ERRORS ON MY NEW LAPTOP
  The same mistakes on two laptops. The question is: what do you actually do?

• How to prevent activation of the application switcher function the central button of the mouse

  I use a mouse third with a scroll wheel (button 3) as the central button of the mouse.  How can I prevent this activation of the application switcher function button?

  System Preferences > mouse allows you to assign actions to the buttons on the mouse. Some mice come with their own drivers/preferences.

• Satellite U500 - how to enable VT in the BIOS?

  I can't find the ability to enable virtualization in the BIOS.

  It is possible on the model D 11, but I don't understand why only on this model.

  Can someone tell me, how can I patch the bios to enable this feature?

  THX.

  Hello

  Virtualization technology depends on the CPU!
  It is available only if the CPU supports it.

  Are you sure that the processor in your Satellite U500 supports VT?
  If it does not support this function so that could be one of the reasons why the VT is not available in the BIOS