Satellite C855-2F1 - internal Windows 8 recovery tools does not

Similar Questions

• Windows Phone, recovery tool is not installed in windows 7, says the hash value is missing

  Windows Phone, recovery tool is not installed in windows 7, says the hash value is missing. Whenever I try to install the windows phone recovery tool it does not install error

  0 x 80070003, system can't find the path or 0x800b0101, hash value is missing... Please help

  Hi Imran,

  Thanks for posting the query on Microsoft Community.

  I'm sorry to know that you can not install Windows Phone on Windows 7 recovery tool. The problem could be due to system files or software problem.

  Try to solve the problem by following the methods below.

  Method 1

  Try to run the patch from the link below and check if it helps.

  Error code 0 x 80070003 when a preference of group policy is applied on Windows 7 clients:

  http://support.Microsoft.com/kb/2904034

  If the problem persists, then go to method 2.

  Method 2

  Refer to suggestions provided by Vijay B responded on December 22, 2009.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/the-system-cannot-find-the-path-specified-error/dae5f759-B053-4a4a-87af-42e79f517631

  I hope this helps to solve the issue. If the problem persists, get back to us. We will be happy to help you.

• Follow this procedure when the Sansa Connect recovery tool does not work!

  Hey people;

  This thread is just to consolidate the info from a lot a longer wire, earlier.

  Currently, the Sansa Connect recovery tool may or may not work for you.  You can see an error like 'failed to connect to the Internet' or "cannot retrieve the device, SanDisk contact technical support for assistance."  If Yes, it's probably because the recovery tool is unable to download the firmware images he needs zing.net.  SanDisk has not (yet) recognized this problem.  The strange thing is that * sometimes * recovery tool works, if you already have images of the firmware on the drive... but usually it doesn't.

  So here's what you do (with thanks to Larlos for providing the firmware images and order lines to their installation).  This assumes that you're 'stuck' to the "necessary recovery" post on your connection.  If not and you are in the regular menu of Sansa Connect, first follow steps 2 and 3 in this paper: http://mp3support.sandisk.com/tools/connect-recovery-instructions.pdf, do the following:

  (1) download the zip file containing the images of the http://www.megaupload.com/?d=UNLDGZ1N firmware

  (2) search for the following files in the zip file, and then copy them into the directory of your drive "C:\Program Updater Connect Device Recovery\cmdline":

  • everest_initrd_ext_prod_1.1.1.50239.SRR.e
  • everest_vmlinux_ext_prod_1.1.1.50239.SRR.e
  • yeverest_zap_ota_rel_1.1.2.65799.tar.gz.e
  • yeverest_zap_ota_rel_ext_prod_1.1.2.65799.SIG

  (3) in the same directory, create a file named recovery.bat that contains the following three lines:

  zsi_fw.exe w everest_vmlinux_ext_prod_1.1.1.50239.srr.e everest_initrd_ext_prod_1.1.1.50239.srr.e

  zaprecover.exe t 600000 f yeverest_zap_ota_rel_1.1.2.65799.tar.gz.e yeverest_zap_ota_rel_ext_prod_1.1.2.65799.sig

  pause

  (4) connect your Sansa Connect USB.

  (5) run the recovery.bat file (double-click it in Windows Explorer, or run from a DOS command prompt).  The line of 'pause' is there only so you can see the results of running if you run it from Windows Explorer.  Expect the recovery to the end; at the end of that your connection will restart.  If Windows displays the hardware wizard detected during this process, simply cancel the wizard.

  whturner wrote:

  Thanks for the help - it updated my white box to connect to the WiFi and after registration on Yahoo (without choosing any service, just updated my old email and user ID) I now INet radio with a number of stations that work fine on my home wireless network. To do this, DND to explore and syncs with WMP OK. A few quirks that I wonder about.        (1) after the firmware update, my ZAP showed that 1.2.0.58335r and OS = 1.2.0.58835 - NOW (the next day), it changed to ZAP = 1.1.2.65799r and 1.1.1.50239 = OS. Every thing seems to work even though; I have a firmware download while I was playing with the INet radio?     2) there is also a new menu item "Server Zing" that lists the name of the module, the version, and the primary and secondary server. Is this normal?  (3) what Yahoo service I - I see a small Y! symbol at the top right of the screen.                                                                                                                                               Thank you very much and congratulations Warren

  (1) no; you see the version numbers are associated with the files of the firmware (names starting with "everest" and "yeverest" files) that you have either downloaded when you ran the recovery tool, or download in megaupload.com zip file.

  (2) Yes, it's normal.  Zing is the company that allows you to manage authentication of audio stream and firmware for the connection.

  (3) the Y! symbol indicates just that when you use the Internet Radio feature, you are streaming audio of Yahoo (in fact, now owned by CBS Radio).  There is also a function of Flickr photos, which is associated with Yahoo.

• Microsoft Windows Management Instrumentation tools does not

  When you try to use the Microsoft WMI with Firefox tools, Firefox seems to block the ActiveX controls used. How can I enable these ActiveX controls in Firefox if the WMI tools work OK? They work in IE9 OK. This is for Windows 7 64 bit with Firefox 16.0.2

  Hello fox2k, activeX is a microsoft proprietary technology that does not work in any other browser than IE.

• Windows memory diagnostic tools does not work

  Why doesn't windows memory diagnostic tools?

  www.memtest.org . for a free bootable memory testing utility

• 10 Windows Media authoring tool does not ~!

  I have a real PC Windows 7. And I tried to install Windows 10 with the tool of creation of media provided by Ms. When I tried to download Win10 him, it becomes hidden (or I don't know exactly what happened just not see the upward). , the download was 99 percent complete :(!, even once, I tried to download same thing happened to 60% this time.

  Also tell me what is $Windows. ~ WS file (8 GB), it takes my net (I got to know that dialup, it flickered continuously (MCT and everything was turned off this time)). * help ASAP!

  If the Upgrade Wizard of Windows 10 becomes blocked or unresponsive to 99%, wait at least 4 to 7 hours. If the installation program does not progress, close the wizard and restart your computer. Follow the instructions to upgrade manually by using the tool of creation of media or file ISO for Windows 10.

  If you encounter an error about enough space to perform the upgrade, see the instructions:

  How to install Windows 10 on devices with limited space

  Task of pre-required

  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

  • How to back up and restore your files manually
  • How to free up disk space in Windows
  • How to: 10 tips before installing Windows 10
  • How to: 10 things to do if the Windows 10 install fails.

  Retry the upgrade manually:

  Option 1: Using the media creation tool

  Download the media creation tool

  Click with the right button on the MediaCreationTool.exe file and then click on run as administrator.

  

  Note: How to check if you are downloaded or installed the update Windows 10 November

  Select upgrade this PC now and then click Next

  

  Option 2: upgrade using the file ISO for Windows 10.

  Task of pre-required

  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

  • How to back up and restore your files manually
  • How to free up disk space in Windows
  • How to: 10 tips before installing Windows 10

  then

  • How to download official Windows 10 ISO files
  • How to: upgrade previous versions of Windows using the file ISO for Windows 10

  then

  • Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
  • Reboot several times, and then try again.
  • Disable the general USB peripherals (for example - smart card reader). You can do so from the Device Manager.
  • If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).
  • Support your default BIOS reset BIOS.
  • Check if there BIOS updates available for your system, and then to apply them.
  • If you are using a SCSI drive, make sure you have the drivers available for your storage on a USB device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
  • Perform a clean boot, restart, and then try again.
  • If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
  • If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
  • If this does not work, try using the. ISO file to upgrade if possible.
  • If you are connected to a domain, go to a local account.

• Puppet recovery tool does not work

  When I select the desired precomp and click the tool collection puppet, the mesh is and everything works well until it as soon as I leave the overlap of the puppet. But when I look in the precomp, it says it has the effect of overlap on - only, it does not seem to show.

  The overlap tool controls how things work only on this layer. It has no effect on other layers. For example if you craw a C and pull the lower part of the C on top it will end either on top of the other party or behind it. If you want to change the overlap, you use the tool of overlap. When return you to puppet PIN or the display of overlapping of the starch disappears. It's normal.

  I suggest you type 'Corner puppet' in the search field help in the upper right corner of AE and discover some of the community resources excellent to learn how it works.

• Satellite L300 - cannot enter Windows and recovery disk will not stand

  Good evening

  I have a Satellite L300. A month ago, I bought and install an upgrade to Windows 7 (I had Vista). Last night, my laptop was working fine and this morning when I opened it I got this error:

  BOOTMGR is corrupt. the system cannot start.

  I did some research and tried to boot from the recovery disc. Laptop computer the disc I get the windows is looding files screen and then a company Microsoft is displayed with a bar above it and then I get a blue screen that says:

  PROCESS1_INITIALIZATION_FAILED vista

  Now what can I do to reformat my computer and reinstall if I can't load the recovery disc!

  I tried to put my DVD of Vista I have for my other PC, but I have another error black screen...

  Can someone tell me what I can do now?

  Is it because I have a recovery CD for Windows Vista and not 7?

  Okay, so I read several post here and the only thing I can't think is the hard drive... but it had already changed a few months ago by Toshiba... now my laptop is not less guarantee more with Toshiba, but I have an extended warranty with my VISA... If anyone has any idea here, I'll try to bring it where they change HARD drive the last time...

• Windows XP Recovery CD does not work

  Hello:

  I have an old laptop Toshiba Satellite A10 - S103 (I have since December 2004). The operating system is Windows XP.
  When I try to start the computer, the following messages appear:

  {color: #ff0000} ERROR IDE #0
  {color}

  {color: #ff0000} INTEL® BOOT AGENT FE v4.109
  {color}

  {color: #ff0000} Copyright (c) 1997-2002. Intel Corporation.
  {color}

  {color: #ff0000} PXE - E61: Media test failure, check cable.
  {color}

  {color: #ff0000} PXE - M0F: Exit Intel Boot Agent.
  {color}

  {color: #ff0000} Insert system disk in drive.
  {color}

  {color: #ff0000} Press a when you are ready...
  {color}

  When I inserted the recovery CD, I received the following message:

  {color: #ff0000} Drive partitioning error!
  {color}

  {color: #ff0000} Press a key to continue...
  {color}

  And when I press a button, displays the BACK slider:

  {color: #ff0000} C:\ >
  {color}

  I have an emergency disk (3 ½ "), that I created with MacAffe when I bought the computer. If I use this disk, the following message appears:

  {color: #ff0000} ERROR IDE #0
  {color}

  {color: #ff0000} From Magic Bullet
  {color}

  {color: #ff0000} Magic Bullet has detected the presence of a virus as EXEBUG or PURGYST!
  {color}

  {color: #ff0000} These viruses change your CMOS settings so that a booting from C: occurs before a start:
  {color}

  {color: #ff0000} If you now press any key, Magic Bullet is committed to repair your CMOS, invites you to turn off your computer and again this startup disk. Then only, you will have a clean system of wichich to check your hard drive.
  {color}

  When I press any key:

  {color: #ff0000} Magic Bullet has now set your CMOS. Shut down and restart this disc again. Then, run FindVirus to check your hard drive.
  {color}

  I shut down and restart again (with and without the diskette on A :) but the result is the same):

  {color: #ff0000} ERROR IDE #0, etc.
  {color}

  What can I do?

  Thank you.

  I fear that the HDD doesn't work and not recovery of Windows XP Home edition as mentioned in the thread topic.
  HDD correctly recognized and listed in the BIOS settings?

• Satellite L655D crashes on Windows startup screen and does not start

  Hi, I hope someone can help me.

  Portable Satellite L655D age of 18 months of my daughter began to hang on the black 'starting windows' screen, when it stays until it turns off after several minutes. I didn't spend this stage for several days, and the machine seems completely unusable.

  I then turn off by pressing the power button for a few seconds, I can then select F12 with the option to start in safe mode, but the laptop never makes it in safemode, it real just data on a screen black for a few seconds and then it crashes with the message "Please wait".

  Others that look, I'm not able to go beyond these screens.

  Any help would be appreciated.

  Thanks, Darren

  Hello

  Did you create a recovery disk?
  In this case, you could use this drive in order to reinstall windows on the laptop system.

  Another possibility is to drive HARD recovery. Press the power button, F8 and choose fix my computer. Now choose HARD drive recovery.

  I hope that you can do this

• Satellite A205-replaced drive HARD and recovery CD does not. Media test failure

  Help, please

  My wife's computer crashed, everything has begun with damaged or missing file windows\system32\en. He takes to the geek squad and diagnostic test says corrupted hard disk.
  (Trying to recover the data is another problem to solve later)

  To save money, I ordered a new HDD (WD320GB) installed the new HARD drive, inserted the recovery disc and get the following message:

  Pre-seed execution Environment (PXE) v2.1
  PXE - E61: Media test failure, check cable of
  PXE - M0F: Exit PXE ROM
  Operating system not found

  I see the new HARD drive in the BIOS, I changed the boot order to boot with CD/DVD player but still the message above.

  What now?
  Thanks for any help I can get.

  Hello

  Can start you on another disk, mate?

  Normally, this message appears if you can boot from the HARD drive or a disk bootable t. In your case, you need to install the OS on CD/DVD first so I think the recovery disc's maybe scratchy or the reader doesn t work properly.

  Then, try another disc and see what happens. :)

• Windows 8 recovery disk does not

  I have Lenovo G50-20 (model: 20351) and lost recovery disk.

  Y at - it possible that I can get the recovery disk of the Lenovo support (ready to pay the price for it) so that I won't lose my licence 8.1 for Windows OS

  Thank you

  Kumara

  Good day and welcome to the community.

  Please support a call (info below) to discuss for recovery media.

  Kind regards.

• Satellite Pro L750 running Windows 8 pro - Bluetooth does not work

  Hi all

  Has anyone got the Toshiba Bluetooth successfully integrated to work with Windows 8 Pro? I got the Bluetooth RFBUS error (10) and it did not work.

  Help please.

  Would it be possible that you have not installed the BT correctly?
  Because you are using Win Pro 8, I guess you did a clean install of your laptop.

  In this case this Toshiba How To should help you get the BT works under Win 8
  [Turn on the Bluetooth feature after a clean install of Windows 8 | http://aps2.toshiba-tro.de/kb0/TSB2C03FI0001R04.htm]

  Your comments would be appreciated.

• VAIO Update for Windows 10 Upgrade Tool does not recognize my model

  I am trying to upgrade my SVS131290X (which * is * listed in the expandable models)-However, when I go to run the tool to update/upgrade of VAIO indications, it just comes back and says the model is not supported.

  What now? I can certainly try to simply update the OS, but I prefer to do things correctly.

  Thank you.

  The said upgrade page is not ready yet?

  http://eSupport.Sony.com/us/Perl/os10upgrade.pl?stage1=24&stage2=810&STAGE3=SVS131290X&month=&day=&y...

• Windows memory diagnostic tool does not work well

  Hello
  I have memory problem in vista, but I run the application above it works well, but after completion of this test and the PC is automatically restart, 1 - I don't see the icon of results on the taskbar. 2- Also, I don't see any action on event viewer

  does anyone have simillar problem or solution?

  (I suspect all lenovo neutralization process)

  Hi remi,.

  your solution was close but seems I have 3 m total asymmetrical memory, when I took 1 stick (Hyundai 1024 M) memory test took place with the display of the icon tray + report EV.