Satellite click 10 - problem installing drivers after Windows Installer 10 costs

Similar Questions

• Satellite U200-141: problem with drivers after installing Vista

  Hi all

  I just installed Windows Vista, and I'm having some problems:

  1. shortcut keys do not work (Fn + F1, f2, f3, etc does not at all).

  2 Touchpad - I have already installed driver listed it under Vista, but although I can use the touchpad, normally when you point, rattling, etc., I can't scroll. I mean, I can't set up the scroll area (it has been the right corner to scroll vertically and bottom to scroll horizontally). I checked the options of auto-scroll on IE and Firefox, and it does not work here.

  3. I don't seem to be able to install the new BIOS.

  4. the internet, play, pause, stop, etc., (embedded) buttons do not work either.

  5. I have the product recovery CD but this is for Windows XP and I don't know how to install the drivers to go from there.

  I'd appreciate any help anyone could provide.
  Thank you.

  You cannot use the notebook unique features because you have not installed the drivers VISTA required.
  And you can not install Vista drivers Vista drivers are not available at this time

  So what to do? Either you use the Vista without the additional features like buttons etc. or you use the supplied recovery CD and install XP

• Satellite A200-1FL: problem installing Bluetooth on Windows 7

  Hello world

  I have a Toshiba Satellite A200 1FL (PSAE6E) with Windows Vista and I just installed Windows 7 32 bit (no update or upgrade).

  The problem is that when I try to install the bluetooth stack, it installs all ok, but the driver.
  I took the version 7.10.12 for Windows 7 32 bit from http://aps2.toshiba-tro.de/bluetooth/?page=download.

  The driver installation window presents itself and the progress bar does not move.
  I waited for a long time and nothing, no response, so I have to cancel.

  However, the software has been installed and when I try to start Bluetooth config or any other tool, the same phenomenon occurs: the driver installation window shows upward and nothing.

  Also, I tried to follow the installation instructions of command since the drivers toshiba download page guess what drivers are each options.

  Can someone knows why this phenomenon occurs?
  Am I missing something or is there a known issue with the Bluetooth in Windows 7 driver?

  Thanks in advance,

  Jorge

  Hello

  On my A500 during installation Bluetooth driver, he invites me to activate the Wlan switch. I don't know if A200 is equipped with WiFi switch. If this is the case, turn it on and try to install. I have more no other suggestion.

• Installing drivers after Windows XP reinstall on Dell Dimension 2350 with Dell resource disk

  Hi all

  Recently, I did a clean reinstall of Windows XP (home edition) on my Dell Dimension 2350. Everything went well. Now, I need to install the appropriate drivers. I have the Dell resource disk and this is where the problem starts.
  As noted elsewhere, after reinstallation of that display on the screen of the disk resource is as it is in 'Safe Mode '. I was aware of this. Therefore, the search criteria screen resources drive was a little bigger than the screen of the monitor. I managed to its size to fit the screen, but this really isn't the problem, is the following: the search criteria options I have in the dropdown menus (on screen) are the following:

  System model: all, DXC061, DXP0G1 Dimension, Dimension E521, DM061, Dimension C521, XPS710 (who, if necessary, to choose?)

  Operating system: (I think I got this one) all, Windows XP

  Topic: (maybe this one too), Dell Diagnostics, Diagnostics, drivers, Applications, utilities

  For the life of me I can't understand the correct drivers, I am to install *. Windows XP appears in the menu of the operating system. I know enough about the order of installation, but as I said, I'm a little confused on the selection of the drivers from the disc. This computer is not connected to the internet at the moment so I can't download and use any kind of pilot program. Other research have confused me more far and provided no precise answer to this problem.
  If anyone can enlighten me on the solution step by step to this (I think "Dell resource disk for Dummies"), I would be extremely grateful.

  Thank you all!

  Zlek1207
   
  * If it will help, I went in (with "Show Hidden Files" active) Device Manager and it shows (with the yellow question mark) are:
  Other devices: Ethernet Controller, multimedia Audio Controller, video controller (VGA Compatible).

    

  You need, in the order of installation:

  1. Driver Chipset
  2. Video driver (depends on what video card)
  3. Audio driver
  4. Network driver (depends on who you are)
  5. Modem driver, if you are using a modem

  Go to the Support page and put in your Service tag. He expected to give you the drivers you need. You can download them to any PC and copy it to a USB key for installation on 2350.

  You only need applications, if you actually use them (for example, Roxio, Jasc Paintshop, etc.).

  Then install your antiviral software and get in line on the Microsoft Update site for all patches and updates.

  Please keep in mind that XP is no longer supported by Microsoft, and they stopped release of the security fixes for XP and IE9, more than 1 year. So they're all two full of security holes and put your data personal in danger.

  UNDER THE DIRECTION

• Satellite Pro C850 - problems with WiFi after Windows update 8.1

  Hello

  I was wondering if someone could give some advice on a problem I have.

  Had an adjustable C850 Pro for a few months and worked well on Windows 8.
  I myself am then harassed and intimidated by Microsoft Update in order to install Windows 8.1 and in a moment of weakness, I succumbed (got sick of the nagging).

  Since that time, my wifi is very intermittent; either I'm on another computer write this and the laptop is essentially not connected to the internet.

  For some reason any (although I didn't try it before), I can not connect via ethernet either, so I think it's probably the driver problems. (I also tried to connect the public wifi but fails).

  I tried to install the driver WiFi Toshiba 8.1 but that has not solved the problem.
  Then I noticed that I'm supposed to install a bunch of drivers in the order.

  Maximum setting to do it, but the first package (associated with bluetooth) said I have to remove the current driver... I try by "turning off", then "Uninstall" but 8.1 seems to re - install automatically and I don't know how to disable this option (I can try to delete the driver file, I guess, but I'm sure 8.1 covered too and will probably launch a drone to try me out ", if I do). *

  Any kind soul there suggestions on a way forward? Pls.

  I see in the instructions of Toshiba Windows Update 8.1 should I have uninstalled the drivers before the update, but there is not much I can do about it now. :(

  Hello

  > I don't see in the instructions of Toshiba Windows Update 8.1 should I have uninstalled the drivers before the update, but there is not much I can do about it now
  All your problems with the Windows 8.1 update related to the fact that you have not upgraded the Windows 8.1 system as recommended by Toshiba.

  Details:
  http://www.Toshiba.EU/innovation/generic/windows8_1-message/

  Solution?
  Back to Windows 8 (reset the system back to factory settings)
  Then, install all updates and patches for Windows 8 and follow along with the upgrade of system as described on the Toshiba Windows 8.1 upgrade page

  On the page of the Toshiba UE driver, you will find all the instruments that must be installed in the correct order and Windows 8.1 driver!

• Problems installing drivers after the replacement of Win Xp Home Ed by Win Xp pro.

  Need help.
  I have a Toshiba Satellite M70 - SR2 (bought last December), which came with Win Xp Home Ed pre-installed on it. I remove the home Ed and installed my XP pro Spk2. Now I can't get my wireless connection to communicate with my Linsys router so I can connect to internet, that failed to install the video card...
  I only managed to download and install the audio drivers and the modem drivers.
  I have downloaded the display drivers, unzipped the file but could not install them as I did with the audio drivers.
  In my device manager, I always get a yellow marke in front of:
  Controller - Eternet
  SM Bus controller-
  -Video control (VGA Compatible)
  Can someone gives instructions on how to obtain and install these drivers or where I can find the instructions.

  Thankx

  Hello

  Well, the right installation order is very important because some drivers and utilities can be installed without the other drivers.
  I recommend to follow the installation instructions and install things together.
  If you don't need something then you can remove the bone in Add & Remove software.

  To solve the problem of yellow question mark that you have to install the drivers.
  (At the beginning) chipset driver, Lan/Wlan driver, display driver.

  But if you follow the installation instructions you shouldn't t get any yellow points mark.

  Concerning

• Problems installing drivers in windows

  Mr President, I bought a Toshiba laptop with Windows 7 HOme PRemium installed. Very recently, my hard drive crashed and I had to install the OS. I installed windows 7 ultimate. But it is not working properly. Some of the device drivers can not be activated. Especially wifi services.  How to fix it. It is a laptop computer for my personal research in the treatment of the image. Pls advice.

  Original title: problems with installation

  Hi Bama,

  Thanks for posting your query in Microsoft Community.

  I understand you have issues installing some drivers on the computer.

  I would need more information on this issue to help you better.

  (1) don't you perform a clean installation of Windows or it was a repair install or an upgrade of Windows?

  (2) what is the exact error you get all, installing the drivers?

  (3) do you still feel the drive hard breaks down in the computer?

  (4) what is the brand and model of the computer?

  In the meantime, please follow the following suggestions to solve the problem.

  If you have performed a clean install then, you will need to re - install the drivers for the hardware provided by the manufacturer. To reinstall the drivers, you can either use the drivers and Utilities disc if not, download the correct drivers from the website of the manufacturer of the computer.

  If this does not help then, try to refer to the below mentioned link to fix the problem.

  Automatically get recommended drivers and updates for your hardware

  Also refer to:

  Update drivers: recommended links .

  Updated a hardware driver that is not working properly

  I hope this helps. Otherwise, do not hesitate to write back the required information and we will be happy to help you.

  Thank you

• Problem installing drivers Dell for Inspiron 5520

  Hello

  My husband has an Inspiron 5520, 64-bit operating system. The warranty has expired 8/2013.  He had a hard drive damaged, that comes to replace with a new one. I am installing Windows 7, the necessary drivers, etc. and spin problems installing drivers.

  Here's what I've done so far:

  I'm following the instructions on the way which manually reinstall Windows 7 on a Dell (http://www.dell.com/support/troubleshooting/us/en/19/KCS/KcsArticles/ArticleView?c=us&l=en&s=dhs&docid=DSN_362048).  I created a Windows 7 DVD and followed the steps leading to a successful installation of Windows 7.

  I am now on step 4 of the instructions - installation of the drivers. I went to the Dell drivers and downloads page and entered the serial number of the laptop, which has generated a list of drivers. The list entitled, installing drivers in the Correct order, I started with system utilities. There were two items listed for his laptop. I downloaded the desktop of my laptop and transferred then to a USB drive. I inserted the USB in the Inspiron laptop and tried to install. In both cases, I received an error message that reads:

  "This computer does not meet the minimum requirements for installing the software."

  How can I fix this problem?

  Thank you.

  BJ

  This isn't Dell System Software.

  System software Dell is here:

  http://dellwindowsreinstallationguide.com/driver-sets/Dell-system-software/

  The file list is Intel Quick start technology and won't work probably only if you have a disc SSD Cache in your system.

• Not able to install Itunes for my pc windows7 (64 bit) im... Every time I have install I get the message "there is a PROBLEM WITH CE PACKAGE WINDOWS INSTALLER. A DLL REQUIRED FOR THIS FULL INSTALLATION COULD NOT BE EXECUTED. PLEASE CONTACT THE SUPPORT STA

  Not able to install Itunes for my pc windows7 (64 bit) im... Every time I have install I get the message "there is a PROBLEM WITH CE PACKAGE WINDOWS INSTALLER. A DLL REQUIRED FOR THIS FULL INSTALLATION COULD NOT BE EXECUTED. PLEASE CONTACT THE SUPPORT STAFF. "What should I do? I am new to Iphone! If you could help me on this, it would be very appreciated...

  aarruunn, you might want to try Windows Installer Cleanup utility.

  http://www.MajorGeeks.com/files/details/windows_installer_cleanup_utility.html

• Error message "the upgrade patch cannot be installed by the Windows Installer service because the program to be upgraded is may be missing or the upgrade patch may update a different version of the program."

  Original title: cannot install WMP11, update rollup 2

  I'm still on WMP 10 for a reason, and I wanted to connect my PC with 360 videos. I downloaded the update, but he told me to go get the Update Rollup 2 or something, so I tried to install it and he told me that I needed to go get the .NET framework 1.1 and .NET framework 1.1 SP1. I went to download them and install them, but he tells me that "the upgrade patch cannot be installed by the Windows Installer service because the program to be upgraded is may be missing or the upgrade patch may update a different version of the program".

  I Googled, tried of all kinds, uninstalled SP3 and tried and nothing.

  Hi xelliotx,
   
  I suggest that you follow these steps.
   
  Step 1:
   
  First of all, download and install .net Framework Cleanup Tool to remove selected versions of the .NET Framework on your computer.
   
  Step 2:
   
  Manually install the versions of Microsoft .NET Framework below:
   
  Microsoft .NET Framework Version 1.1 redistributable package
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=262D25E3-F589-4842-8157-034D1E7CF3A3&displaylang=en
   
  Microsoft .NET Framework 1.1 Service Pack 1
  http://www.Microsoft.com/downloads/details.aspx?FamilyID=a8f5654f-088e-40b2-bbdb-a83353618b38&displaylang=en
  Once this installation is complete, try to install the other required software and check.
   
  See also:
   
  Error message when you install an update for .NET Framework 1.1 or the .NET Framework 1.0: "the upgrade patch cannot be installed by the Windows Installer service.
  http://support.Microsoft.com/kb/940332
  
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• The upgrade patch cannot be installed by the Windows Installer service because the program to be upgraded is may be missing, or the upgrade patch may update a different version of the program

  I try to use the Microsoft Office tool that implement an MSI for 64-bit Office 2010 installation file.  The tool works file and creates the msi file.  I get to the tool by going to the x 64-bit folder on the office 2010 installation disc.

  I install a new virtual machine from Windows 7 and tried to use the MSI file to install office 2010 and I get the error:

  "The upgrade patch cannot be installed by the Windows Installer service because the program to be upgraded is may be missing or the upgrade patch may update a different version of the program"

  If I just click Setup on the office 2010 dvd he moved very well on the same VM window7.

  Does anyone have an idea how do to understand why the windows installer keep fails or what he wants?

  If I click on the msi even on a system with office 2007 is installed, I get the same error.

  Thanks for the help

  jbabe

  Windows Update has nothing to do with the upgrade or installation of Office 2010. Please post future questions in this forum: http://social.answers.microsoft.com/Forums/en-US/officeinstall/threads

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Satellite 1800: Should I install drivers manually after upgrade OS to Windows XP?

  I've updated the operating system of my laptop Satellite 1800 from Windows 98 (original OS) to Windows XP with Service Pack 1.
  Windows has detected all devices, but I should update the drivers manually by using the drivers download page?

  Windows cannot detect the IP address of the DHCP server. The cables and the server are functioning properly, so this is a situation created by the use of a bad network card driver?

  Hello

  Of course, you must install all Toshiba drivers after installing the original Windows XP.
  If you n t have a CD drivers & utilities, you can download the necessary drivers on the Toshiba site.

  You should check the Device Manager and if you find a yellow exclamation next to the LAN card so I guess that the driver was not installed and you need to install the LAN driver.

• Satellite L500-13W - what order to install drivers on Windows 7 32 bit?

  Hello

  I have Satellite L500-13W and install Windows 7 32 bit. I have download all the drivers.

  What order of installation for my model?

  Hi jason_x,

  I agree with Akuma. Two weeks ago I also installed Windows 7 on a disk of Microsoft and after installing Windows 7, I started with installing the chipset driver. Then I installed the Intel Storage Manager, then display driver. After that, I installed the rest of the necessary drivers.

  I didn't use a special installation order. After installation, all devices have been properly recognized in device without yellow exclamation points Manager.

• Satellite A200-23W: problem installing Windows Vista

  Hello..

  I now that this topic is discussed several times before, but after trying many solutions of the forum and some of my only, I reached a level that it makes no sense...

  First off I would like to explain what I do for a living, it has to do with IT and that is what makes it even more tempting for me.

  2 days ago a friend bought a Toshiba A200-23W. The first thing I always do when I buy a new laptop is to format it and install a clean Windows operating system.
  After my first attempt, I realized that I have to install first the matrix storage driver.

  I downloaded the driver from toshiba place related to my model. (Intel Matrix Storage Manager - 7.5.0.1017).
  I created a usb key with the required driver files:

  iaAhci.inf,
  iaAhci.cat,
  iaStor.inf, iaStor.cat,
  iaStor.sys, and
  TxtSetup.oem

  in the folder (F6flpy) of the (Intel Matrix Storage Manager) you can copy them to the root of the USB stick.
  When the form "Where you want to install windows" windows Vista appear I select load the driver, and then by clicking (Browse), I select the USB drive as source for my drivers.
  The (Intel(r) 82801HEM/HBM SATA AHCI Controller) will automatically appear as a choice and by clicking on the (Next) the process of the pilot installation begins.
  So far so good..

  Here's where things get complicated...
  When Vista back to the form "Where you want to install windows", even my system has 2 x 200 GG HDD only 200 GB HARD drive appears in the list...

  Selections of 'New' Partition, or a Partition of 'Delete' are disabled.
  and even when I click 'Next' for selected HD a windows message:

  "Windows has no determine if this computer contains a valid system volume."

  I'd appreciate your help...

  Thank you in advance...
  George P.

  Hello

  You cannot format the HARD disk or delete the partition because this would remove the SATA driver too, and the HARD drive would not be recognized by Vista!

  Therefore, you need to install the OS on the HARD drive that is displayed in the installation program.

• Problems installing drivers for printer EPSON L110. Error message "Windows could not determine the language to use for the installation: CODE of ERROR: 0x80004005.»

  Original title: trouble installing the drivers for my printer.

  Hello

  I am trying to install an EPSON L110 and eveytime I try to run the CD, it appears this error message.

  Windows could not determine the language to use for the installation: CODE of ERROR: 0x80004005.

  I have windows 7 32 bit OS. What I'm doing. A quick response will be very useful.

  TKS

  Gerard

  Hi, Germain,.

  This problem could occur due to corrupted files. We will try to download and install the latest printer driver on the site of the manufacturer of the printer. Check if it helps.

  http://www.Epson.co.in/epson_india/ink_tank_system_printers/product.page?product_name=Epson_L110&tab_index=4

  See the articles for more information.

  Install a printer

  Find and install printer drivers in Windows 7

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.