Satellite L - after that set BIOS to update the screen is black

Similar Questions

• Equium A210 - after that set BIOS to update the DVD player has stopped working

  Hi, since I have recently updated my BIOS, my DVD drive has stopped working on my Equium A210-1AS with Vista 32 bit.

  I tried the program fixme Microsoft who does not work, upper and lower register isn't here ether in regedit.
  Someone at - it solutions for getting the DVD drive working again?

  Thank you

  Hello!

  The CD/DVD drive is listed in Device Manager? You see an error code?
  If the drive is listed in Device Manager, you should try to remove it, and then restart the laptop.

  Try to load the default settings in the BIOS.

  Have you tried to remove the upper and lower filters by yourself? Here is the solution from Microsoft:
  http://support.Microsoft.com/kb/314060

  Good bye

• Portege M300 crashes after that 'Windows stops' appears on the screen

  The computer hangs after that 'Windows stops' appears on the display. The same phenomenon occurs in hibernation mode. I have to turn off the computer by holding down the power button.

  I updated my bios, installed all the updates of windows that are available and made a number of other things. It starts just out of the blue. Any ideas?

  Hello

  It happens after installing the OS from the Toshiba Recovery CD?
  You have installed any additional program?

  I noticed a similar freeze on my laptop. For the most part, it happened because the background process has not closed, and so the laptop could not force the closure downwards. In my case it was an adobe acrobat reader software that could not close.

  I think you should you HDD defragment and use the freeware CCleaner application.
  This program cleans the program errors and corrects registry entries.

  Try it! Maybe it s not a serious problem!

• Satellite l30-149, that nothing is visible on the screen

  This pc with Vista has now stopped working. You can here that something starts, but the screen is black.
  I connect a monitor to it and starts normally. You can see on the screen when Windows starts, and then the screen becomes black and you can here the melody telling you that Vista is started.
  Then I start the pc in safe mode, all now seem ok on the Windows start screen. Now, the pc seems to work ok.

  My guess is that the problem is in the graphics circuits on the motherboard.

  If the problem was the screen that he must have worked OK when I started with an external display, but it didn't, only in safe mode.

  Hello

  It seems that the chip of the graphics card is affected.
  As you say; If the screen of the laptop would be defective, the external monitor should work ok, but it doesn t. So I guess what he s GPU.

  Unfortunately, in this case, you will need to replace the mobo ;(

• Satellite X 200 - 15 K power on but the screen is black

  Hello

  I have Toshiba Satellite X 200-15 K, two days ago, I have problem with screen, the screen I have noise, I think it's the same error in my display driver and I have stop near windows xp and try to after 1 min, but the screen has more noise when the startup boot image and I stop by button / stop on laptop.

  Then do what I ve tried again to turn on my laptop but on the screen, I see only artifacts (same squadrons of colors) and after that, my laptop can not work, I tried to power on him but I only power led and HDD light works only 5 sec and after off the coast, and the cooler works 5 sec too and after offshore.

  I tried to remove the battery and the RAM and the wireless and all that I can :), but nothing happens, but when I try to power without RAM I see on power light beep two red and two yellow (IE my motherboard work).

  Maybe it can help me. I think I have dead motherboard.
  And for me, it is interesting that someone may have similar problems.

  Thank you.

  P.S Sorry for my English :)

  Hello

  Let's summary.
  You had a few artifacts on the screen, and now, you are not able to start the unit.
  Nothing appears on the screen; Neither the Toshiba start screen appears is good?

  Hmm seems material issue I m thinking about GPU (graphics chip).
  What do you think of this?

  If it's really a problem of graphics card, then you will need to replace the motherboard.
  In most cases the chip belongs to the mobo anyway... something like this can be done by an ASP in your country.

  Then please get in touch with the guys to get more details about this

  I wish you good luck

• After that set Firefox to update my version to 33, the application is launched in a black screen. I tried to uninstall/reinstallating. Can't see menus or anything!

  Noted in other messages asking users to start Firefox in safe mode, but since I do not see the menu...

  Use the SHIFT key when opening Firefox, disabled hardware acceleration, looks like I'm back in action. Thank you, Philipp!

• After that my monitor was sleep, the screen will become very low.

  Sometimes, I have to reboot to get the full screen again.  Sometimes, I can just log off and then log in to get the full screen.  What causes this?

  Hi Betty1150,

  Thank you for your message.

  This is usually the result of the video card driver.

  A program that runs in the background can sometimes cause a conflict and the driver load correctly.

  Or the video card its self may have a little problem recovery sleep, or sleep.

  First, the easiest to try thing is to reinstall the video card driver.

  Here is an article on how to do it, I recommend that you check the section 'manually update drivers:

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  If that doesn't do the trick, you can try to perform a boot, to see if a startup program is causing the problem:

  http://support.Microsoft.com/kb/929135

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Setting display to adjust the screen from black.

  Where settle this on Vista Home Premium? Impossible to find.

  Hello

  Control Panel - Power Options - Choose top left when turn off display

  Also check the power Plans - change plan settings - check those and advanced settings
  Reset to default values if necessary and then set as you wish.

  Control Panel - personalization - screensaver

  I hope this helps. Rob - bicycle - Mark Twain said it is good.

• Satellite L500-1TC - does not start and the screen stays black

  Hello

  I have a Toshiba Satellite L500-1TC and since yesterday it no longer starts.
  The picture freezes and it restarted. Given that I can push the power button on my laptop and the LED indicates that it is on, but the screen remains black.
  No idea what I can do?
  The warranty is still active, so can I send it to Toshiba?
  Kind regards
  Sven
  (Sorry for my bad English)

  Hey Buddy,

  What you can try before you contact Toshiba official service is the following:
  [What steps must be followed if your Toshiba laptop does not start? | http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=21]

  If it doesn t work it seems to be a hardware problem, then contact an authorized service provider. If your laptop is under warranty, the repair is free :)

• After that 'stop and install updates' on restart it happens to "configuration" 3/3 then restarts then does "configuration 3/3" again and restarts in a loop ""»

  This is windows vista business.

  After that 'stop and install updates' on restart it happens to "configuration" 3/3 then restarts then does "configuration 3/3" again and restarts in a loop. ""» I tried to find out latest fashion good and safe, but still the same. Help, please.
  Is it possible from a different drive to boot and then by applying some changes that would stop it. At the time when the computer is unusable, it just starts to "configuration updated 3/3" then restarts.

  Hello

  Try these methods.

  Method 1:

  You have to do a cold start, press and hold power for a few seconds (10).

  Wait a minute or two and turn it back on.

  Make sure that "all the" non-essential devices are disconnected. (USB keys (for example, flash drives) or any other external media like this takes place.).

  If you can, start safe mode.

  Start your computer in safe mode with network.

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  NOTE: see 3 from the link above, Advanced options boot (including safe mode).

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

  Select Mode safe mode with networking.

  Method 2:

  Use the system restore feature:

  (a) click Start, type system restore in the Search box or search programs and filesand then click on the system restore under the programs section.

  (b) on the System Restore page, click Next.

  (c) select a restore point during which you know the operating system works, and then click Next.

  The restore point should be a date that precedes the first time you encountered the problem.

  NOTE: If you use system restore when the computer is in safe mode, you can't undo the restore operation.

  See also: error: configuration of the Windows updates failed. Restoration of the changes. Do not turn off your computer when you try to install updates for Windows

  http://support.Microsoft.com/kb/949358

  Data loss caveat:

  Be sure to back up data that you want to keep before you begin. This is to ensure that there is no loss of data.

  Method 3:

  Step 1:

  To avoid this problem on Windows Vista, obtain and install update 937287 from the Microsoft Download Center separately from all other updates on Windows Update site. Install the update that applies to your version of Windows Vista so that you are able to install future updates.

  A software update is available for the Windows Vista installation software feature

  http://support.Microsoft.com/kb/937287/en-us

  The following files are available for download from the Microsoft Download Center:

  Windows Vista x 86 systems

  http://www.Microsoft.com/download/en/details.aspx?amp;displaylang=en&ID=15287

  Windows Vista x 64 systems

  http://www.Microsoft.com/download/en/details.aspx?amp;displaylang=en&ID=23732

  Step 2:

  Save the update to a location on your hard drive, you can find and then install the update from there.

  Download, *Save* and install the update with no security (antivirus/security suite) software installed, disconnect from the Internet, disable the firewall & close all non-essential processes in the Task Manager.

  Disable antivirus programs and firewalls.

  Disable the anti-virus software

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Windows Firewall

  http://Windows.Microsoft.com/en-us/Windows-Vista/firewall-frequently-asked-questions

  Note: Make sure that you enable the antivirus software, other security and firewall after the test programs.

  Caution:
  Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  I also recommend taking off of USB keys (for example, flash drives) or any other external media, as this takes place.

  When the file is downloaded, see these steps.

  (a) right -click on the file and

  (b) select run as administrator from the menu.

  Check if it helps.

• I have windows 8 in my computer toshiba laptop. After you set up windows for the updates it says «restoration of the changes...» Impossible to install the important updates'... What do I do?

  I have windows 8 in my computer toshiba laptop. After you set up windows for the updates it says «restoration of the changes...» Impossible to install the important updates'... What do I do?

  Hello

  Please, try the suggestions mentioned here and see if they help you:

  http://www.thewindowsclub.com/failure-configuring-Windows-updates

  Hope this helps, good luck :)

• Need help to understand why my downloaded PDF doc displays "Please wait...". If this message is not finally replaced with the appropriate content... "after that I have already downloaded the version update for windows 10

  Need help to understand why my downloaded PDF doc displays "Please wait...". If this message is not finally replaced with the appropriate content... "after that I have already downloaded the version update for windows 10

  This is because the PDF file is not be open in Acrobat or Reader, but by the browser which is unable to handle the specific PDF content.

  If you use Firefox or Chrome, follow these steps: https://helpx.adobe.com/livecycle/kb/xfa-forms-firefox-chrome.html

• Receive the error message after that firewall creative cloud update changes to our network.

  Receive the error message after that firewall creative cloud update changes to our network.

  We have a user, who tries to update through the creative application of cloud.  We tried to find what is blocked but have met a dead end.

  When the cloud creative software attempts to shout that we see a connection attempt https://ops:443 / ims/token/v1

  I did some research and the only reference to the IMS for Adobe, I could find was the IMSService.  This seems to be an authentication service.  The problem is that "ops" are not a valid domain.

  This issue seems to only affect the Creative Software of clouds as I was able to update a test computer with Creative Cloud via Adobe Application Manager.

  The user's system and our test system are running OS X Yosemite

  Hello

  Can you please check is below the links with white combination ports on your firewall. Adobe creative cloud desktop application uses these ports only.

  Address	Ports
  ccmdls.Adobe.com		443
  IMS - na1.adobelogin.com	80	443
  IMS - prod06.adobelogin.com		443
  na1r.Services.Adobe.com	80	443
  prod-rel-ffc - ccm.oobesaas.adobe.com		443
  prod-rel - ffc.oobesaas.adobe.com		443
  LM.licenses.adobe.com	80	443
  ccmdl.Adobe.com	80
  swupmf.Adobe.com	80
  swupdl.Adobe.com	80
  ACP.adobeoobe.com		443
  interaction.Adobe.com		443

  Thank you

  Ashish

• After that IOS 9.3 updated links no longer work

  I recently updated my iphone 6 to 9.3 IOS and now when I click on a link to e-mail, text, or safari, the application crashes and takes me to the link.  Can someone help me with this?

  Have you done a reboot since the update?

  Close all open applications by double-clicking the home button, and then drag to the top of the application window until it disappears from the screen.

  Reset your device: press and hold the home button and the sleep/wake button until the screen goes black, and you see the Apple, then let go. (No data loss)

• After you enable SLI on the Satellite x 200 mode the screen goes black

  Hi all

  my name is Alessio and I encounter the following problem with my Satellite x 200-24e with Vista home 32-bit:

  Recently, I updated the operating system and yesterday I updated the VGA driver with the latest version available on the web site of Toshiba (display-20080904102618), everything worked fine but when I activated mode SLI the screen went black.

  I restarted the laptop and I tried to boot Vista on a regular basis, but I still got black screen.
  Then I started Vista in safe mode and reload the VGA drivers to set the SLI mode since the safe mode did not identify the model VGA.
  Can anyone help me solve this problem and get the SLI mode working again (I was able to set the SLI mode before update the VGA driver)?

  Thank you

  This wonderful s information.
  It of strange that the screen was dark after the SLI has been activated but it looks like it's working now.

  Thanks for your comments