Satellite L do not turn on the first attempt

Similar Questions

• When I select print the printer responds but does not print on the first attempt.

  I have a printer HP psc 2170 and when I select print the printer responds but will print on the first attempt. It will start and then it is as if she is not detecting or responding and take up to 3 pages before it will print completely. I went back and set the parameters by default, unplugged the printer for a while and reconnected with no luck. Does anyone have ideas to help me solve it?

  Hello

  1. what version of Windows is installed on the computer?

  I suggest you to follow these steps and check if that helps:

  Method 1:
  Try to run the printer Troubleshooter and check that if it helps, here is the link:
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Method 2:
  Try to run the below fixit and check if this may help:
  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

  It will be useful.

• Dialpad in 4.4.4 will not work on the first attempt

  Hey everybody,

  I just updated my motorcycle with android 4.4.4 g and my unit is ok but there is a small issue. Whenever I touch the dial pad icon to dial a number, the numbering screen not coming in a first attempt. Also, I used safe mode to see if the problem is resolved, but it's the same in safe mode too. Is there any kind of bug or other problem that causes this problem? I have not any other pitcher and not had this problem before the update... Please suggest me if anyone has a solution... and also say if you are facing this problem too. I also made a video and uploaded it please look and tell me what needs to be done.

  Thank you

  https://forums.Motorola.com/posts/8bc108da92

  This issue has already been discussed in the link above. If you have disabled animations in the developer settings you get this "bug". There was not present in section 4.4.2, but for some reason it is in 4.4.4.

• Adobe Edge (with video) + Sizmek does not load on the first attempt in Firefox

  We tried to get a series of Adobe Edge HTML5 with video to work with Sizmek and Firefox and have had no luck.  We did a series of works autour and nothing seems to work.

  But if we do a sequence of basic Adobe Edge it works fine, but as soon as that video is attached it crashes and does not do anything (on initial load).

  We found this banner of Adobe Edge with video works with all browsers except Firefox unique.

  So far, we tried the following solution.

  What has not worked

  • Move the code of compositionReady edge of Sizmek at the head of the document.
  • Mix video load order in the file edge.js
  • Reduces the size of the video thinking it could be a weight of file problem.

  What worked

  • Deleted the video in the Edge file and have basic animation and it works very well.
  • Removed the Sizmek EB codes and it is loaded with videos, but is of no use to us because it does not respect the framework of ad Sizmek platform.
  • Re-build the banner using only the model Sizmek with greensock and works perfectly.

  Have contacted us the support of Sizmek and crossed a few developers and they said that the issue is in the ship's library and the compositionReady event is not dispatched to the first loading of Firefox.

  They have also done a few tests and think it might be a big problem with Adobe Edge and asked that contact us Adobe to find a solution.

  Can someone please point us in the right direction or other solutions of workaround to get the edge work "reliable . ” with Sizmek and Firefox?

  We know that we can build with just all the code, but our digital designers are not coders and need a solution to animation of timeline as opposed to a text editor. (With "Edge animate the logical progression of Adobe Flash for them")

  
  

  Thanks in advance!
  

  My current configuration of the system: MacPro (end 2013)

  Operating system: OSX Yosemite 10.10.4

  Animated adobe Edge Version: Adobe Edge CC 2015

  Version of Firefox: 38.0.1

  
  

  Here is a preview link:

  http://platform.mediamind.com/Eyeblaster.Preview.Web/default.aspx?previewID=9tJlNivoKiW3dH KTuk0LbbCgEiv2EIykKfVwKNgMDykKfuZrA44UDg % 3D % 3D & AdID = 31080610 & lang = en - us

  
  

  Link of the Adobe Edge sample file:

  Dropbox - 970 x 250-video - standard.zip

  .. .on investigated further. including an ogv version seem to fix this problem for some reason any (FF should play mp4s without problem).

  The VGO must be first in the order of the source. I think that this must be done manually in code.

• Satellite L500 - can not turn on the new wireless network card

  I have little problem with client model T. Satellite l500-1ek. I change orginal at BCM94321MC wifi wifi card mini pci card (rev 6). Card works well - everything is ok - driver installed ok.
  But I can not turn on wifi with FN + f8 key - Windows.

  This isn't a software issue - this button should work before starting any kind of system, but do not work. I tried everything, including the update of the BIOS. Card works correctly, but can not turn on wifi: (.)
  Can anyone provide another solution than to change the map?

  PS.
  I have reinstaled value-added package and Flash utility support card - fn Panel works but buton f8 disappeared.
  PSP.
  I tested with another card from mnipcie and have same problem - can not turn on wifi - fn + f8 does not work

  Post edited by: Ipcur

  Hi Ipcur,

  Why you traded with another wireless network card model?

  He works with the wireless network card preinstalled Toshiba?

• Customer global VPN will not connect on the first attempt

  Global VPN Client version 4.9.4.0306.

  I connect to a variety of virtual private networks for clients whom I manage IT systems. When I connect to their virtual private networks via devices Sonicwall TZ in my home office, the first always uptight attempt connection, implementation service or Authenticating or IP acquisition. So I click on turn off, then immediately, click Activate, and it ends. This happens every time that I log in unless I log in no time (maybe a few minutes) after I close an open connection.

  I thought that it would be fair to my laptop; However, it has persisted through two or three versions of the GVPN customer and, more important still, this does not happen when I have my laptop in the office of a client with me - that from my desktop at home.

  So I already know that there must be something on my frontier DSL modem or a service. But it's not as if the customer VPN tells me "your modem has decided to abandon the Sonicwall response during authentication" or something like that.

  Are there measures of troubleshooting/diagnosis/tests of base I can try, or any configuration of particular gateway that could be suspicious. In my case, the gateway is my modem Frontier.

  Yes, it's a little different.

  Thank you for your participation!

  Chris

• computer does not start on the first attempt

  When I turn on my computer it stops down in front of him actually starts to run, it takes several attempts before I can run. Im running windows vista 32-bit home

  Hello

  Error messages?

  It's almost always material so you won't check by a real computer store
  (not the leeks and the glances at a Best Buy or other stores) or system manufacturer
  Supported.

  Usually it worsens until the fixed - do not forget to keep very good redundant backups.

  I hope this helps.

• E5 - 511 never turns on the first time I turn

  Hello, my screen E5-511 blocks whenever I turn on the first time. The acer logo appears, then the screen goes black, but the computer is still running. I have to hold the power button to turn off and then turn it back on again so that it can work. I did an oil change of power (removed the battery and held the power button for 15 seconds to remove all stored power) and then it worked properly for about 36 hours, then right to this same problem. Thus, he never sleeps, it just stops all the time and then I have to go through that nonsense to get it running again.

  No matter who never experienced anything like this before? Thank you!!

  If you are not in the version of the bios 1.10, updare and see if that fixes the problem.

• my computer doesn't turn off the first time.

  my computer doesn't turn off the first time I try to turn it off. This will turn off the second time I select "turn the computer off.

  Hi Guillermo_932,
   
  -You receive an error message or error code while trying to turn off your computer for the first time?
  -Have you been able to shut down your computer without any problem before?
  -If so, remember you have changed your computer before this problem started to happen?
   
  Follow the steps in the article, and check if it helps in fixing the issue:
  Computer does not close properly if selective suspension is enabled
  If it does not, check the event viewer to see if there is no error message related to this issue.
   

  See the following articles for more information on the event viewer display:

  Using the event viewer

  Procedure to view and manage event logs in Event Viewer in Windows XP

  After return with details that are of event viewer to help us help you better.

• Updated windows HP 2000 error failed revertong configuration changes do not turn off the computer

  This computer is my friend.  I don't know what she does for her.  I fixed it before, but it worked one for hours and the same message is still there.

  "HP 2000 failed configuration error windows update revertong changes do not turn off the computer"

  Can someone help me please?

  I forgot too say what Windows 8.

  Hi @Margaret_62 ,

  Welcome to the HP Forums!

  It's a great place to find answers.
  You have the best experience in the HP forum, I would like to draw your attention to the Guide of the HP Forums Learn how Post and more

  I understand that your friends laptop HP 2000 is blocked on "default configuration of the Windows updates. Restoration of the changes. Do not turn off your computer"and worked for hours.

  First of all, I would like to try a hard reset. Performing a Hard Reset or forced Reset.

  If the problem persists here are some links that may help.

  "Configuration of the Windows updates failed. Restoration of the changes. Do not turn off your computer"error when you try to install Windows updates (from support.microsoft.com)

  Computer won't start (Windows 7, Vista, XP)

  If this is not resolved so, you can try a Refresh Your PC to solve problems (Windows 8).

  This will reinstall Windows, but does not affect your personal files.

  If you need further assistance, please provide your exact model of 2000 HP notebook and the result of the resolution of the problems.

  How can I find my model number or product number?

• I have a mini ipad 2 and I fight a smart box and it is not turning off the ipad.

  I have a mini ipad 2 and I fight a smart box and it is not turning off the ipad.

  Go to settings > general, and then turn on lock/unlock.

• My computer is stuck on the preparation set up windows do not turn off the computer__

  I bought a new Toshiba Harvey Normans form - everything was going well until I turned the thing on and comes from this sign prepare to set up windows do not turn off the computer - 30 hours so far... everybody is why if there is a problem is - it may not be fixed. I cannot F8 or do something because when you stop and restart the computer, what happens with the same... also say how I get to the menu restore when I can't cross the saying prepares to set up etc etc, I'm typing this from my old computer and I get very very stressed to this topic

  Take it back to Harvey Normans. ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Configuring updates stage 3 of 3 0 full do not turn off the computer

  Got the scren then restart the pc "Configuring updates stage 3 of 3 0 full do not turn off the computer" and does not get the login screen. Every time when restarting the pc get the same error. Also not able to login in SafeMode also.

  Please provide the support for the same thing.

  You probably eventually turn off manually.

  Read this:

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Understanding Windows Update and Extras in Windows Vista at the link above.

   

  Remove the Vista updates; two ways to do this:

  1. a System Restore to before the updates:

  Click Start > programs > Accessories > system tools > System Restore > restore time/choose your own date > next

  If you use Norton, disable it before using the system restore.

  If it is impossible to enter the Normal Mode, do a Safe Mode system restore:

  Press F8 at the startup/power and the list of startup options, use THE ARROW key to select Safe mode > and then press ENTER.

  System restore steps according to the info above.

  Also:

  2. click on start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

  > then click the one that you don't want > uninstall will appear at the top > uninstall it.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

  > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

  When you take a look at pending updates, you can either download/install them one at the time, namely the update causing you problems.

  > or if you do not need an individual > right-click on > UAC prompt > hide it

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If you have problems to restart, read on:

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  And wonders about the updates of Windows:

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost, although wanting to tell them exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• ORA-38760: this database instance could not turn on the flashback database

  Hi guys

  Without knowing it, I deleted all the files in the directory "fra" where "flashback" folder was there because of space issues. Now am facing the error.

  It's my practical database.

  SQL > startup

  ORACLE instance started.

  Total System Global Area 608174080 bytes

  Bytes of size 1268920 fixed

  184550216 variable size bytes

  419430400 of database buffers bytes

  Redo buffers 2924544 bytes

  Mounted database.

  ORA-38760: this database instance could not turn on the flashback database

  SQL > alter flashback database;

  Database altered.

  SQL > SHUTDOWN IMMEDIATE;

  SQL > STARTUP MOUNT

  SQL > select flashback_on from database v$.

  FLASHBACK_ON

  ------------------

  RESTORE POINT ONLY

  Am not able to extinguish the flame.

  SQL > select * from v$ restore_point;

  Select * from v$ restore_point

  *

  ERROR on line 1:

  ORA-38701: Flashback database log 1 seq 1 wire 1:

  "/ u01/fra/PROD/flashback/o1_mf_c1l5n3lq_.flb".

  ORA-27037: unable to get file status

  Linux error: 2: no such file or directory

  Additional information: 3

  SQL > select flashback_on from database v$.

  FLASHBACK_ON

  ------------------

  RESTORE POINT ONLY

  I also tried to create a restore point and the flashback there.

  SQL > create restore point guaranteed rspt1 flashback database;

  Restore point created.

  SQL > select * from v$ restore_point;

  Select * from v$ restore_point

  *

  ERROR on line 1:

  ORA-00600: internal error code, arguments: [krfg_get_keepseq_2], [1], [0], [0,]

  [0], [0], [0], [0]

  SQL > flashback data base to restore the point rspt1;

  flashback database to restore the rspt1 point

  *

  ERROR on line 1:

  ORA-38729: not enough flashback database data log do FLASHBACK.

  Please help me in this regard.

  Alert log file:

  ...

  ...

  ...

  Mount of redo thread 1, with mount id 305866694

  Sun 25 Oct 10:13:30 2015

  Bytes allocated of 3981204 in the shared pool for the generation of flashback buffer

  From RVWR background process

  RVWR started with pid = 16, OS id = 15486

  Sun 25 Oct 10:13:30 2015

  Errors in the /u01/oracle/product/10.2.0/db_1/admin/prod/bdump/prod_rvwr_15486.trc file:

  ORA-38701: seq 11 Flashback database log 11 1 thread: ' / u01/fra/PROD/flashback/o1_mf_c2oqypb0_.flb '.

  ORA-27037: unable to get file status

  Linux error: 2: no such file or directory

  Additional information: 3

  Sun 25 Oct 10:13:30 2015

  Database mounted in exclusive Mode

  Completed: ALTER DATABASE MOUNT

  Sun 25 Oct 10:13:30 2015

  ALTER DATABASE OPEN

  ORA-38760 marked during: ALTER DATABASE OPEN...

  Trace file:

  ...

  ...

  ...

  :() 2015-10-25 10:13:30.087 SERVICE NAME

  SESSION ID: (156.1) 2015-10-25 10:13:30.087

  ORA-38701: seq 11 Flashback database log 11 1 thread: ' / u01/fra/PROD/flashback/o1_mf_c2oqypb0_.flb '.

  ORA-27037: unable to get file status

  Linux error: 2: no such file or directory

  Additional information: 3

  1. Thank you.

  you experience serious problem... because usually it works very well.

  Try the following:

  SQL > shutdown immediate;

  SQL > bootable media.

  SQL > alter flashback database;

  SQL > alter database backup controlfile to trace noresetlogs;

  SQL > shutdown immediate;

  go to the trace file generated from running (alter database backup controlfile to trace noresetlogs ;)

  location of the trace file is located in the query:

  SQL > select * from v$ diag_info;

  It will contain the script with the SQL commands, you can rename the file with the extension ".sql".

  SQL > startup nomount

  SQL > @trace_file. SQL

  SQL > restore database;

  SQL > alter database open;

  So basically you are going to recreate the files of control again...

• I bought Lightroom 6 and when I open the application for Adobe Manager it does give me an option to download. Are they not turns on the map?

  I bought Lightroom 6 and when I open the application for Adobe Manager it does give me an option to download. Are they not turns on the map?

  Download & install instructions https://forums.adobe.com/thread/2003339 can help

  -includes a link to access a page to download the Adobe programs if you do not have a disk or drive

  Also go to https://forums.adobe.com/community/creative_cloud/creative_cloud_faq