Satellite L - drive HARD recovery error

Similar Questions

• Satellite L670 - 143 - drive HARD recovery error

  Hello

  For some time, I want to reinstall my version of Windows 7 Home Premium 64 - bit on my Toshiba Satellite L670-143.

  Only, the problem is, whenever I try to follow the following steps:
  http://APS2.toshiba-tro.de/KB0/HTD1303440001R01.htm or
  http://APS2.toshiba-tro.de/KB0/HTD7C02140000R01.htm

  He says that the "HDD Recovery" plan on the post of second on the first disc is missing.

  Help?

  Hey,.

  To me it sounds like that HARD drive recovery files are deleted or missing then, how do you want to start the installation of HARD drive recovery?
  Usually, you can do this in the advanced Windows (F8) boot menu and choose fix my computer. After loading some files, you should be able to choose the Toshiba HDD recovery option.

  It it doesn t work you must have the Toshiba recovery disc but you don't create it?

• New drive HARD & OS errors-> HP 8000 Elite Small Form Factor PC

  New drive HARD & OS errors---> HP 8000 Elite Small Form Factor PC
  
  Can not install Win XP on another hard drive
  
  I work with a...
  HP Compaq 8000 Elite Small Form Factor PC
  
  Original SATA HDD is loaded with Windows 7 Pro.
  
  In order to install a program using this PC as a digital video recorder
  I installed the video capture PCI card and related software. I had problems
  associated with software and Windows 7.
  
  I know that the software works with Windows XP.
  Do not want to remove the original HDD, I tried my win7
  to replace the HARD drive and do a clean install of XP.
  
  I get the same error during the installation of the OS.  I tried different
  SATA and different XP install disks.
  
  The error I get is shown in this photo.

  

  Original HP HARD drive is a Hitachi 160 GB
  
  I tried 2 known to be good SATA drives.
  Seagate 500GB
  WD 80 GB
  
  I checked the bios settings and even revenue tio rear BIOS
  default settings.

  I get this error even with everything I tried to do.

  This happens during the OS install just after or during the process of the installation of temporary files are current

  written to the HD.
  
  When I re - install the original HD loaded with Win7, everything works as it
  expected.
  
  Any ideas on what] s going on here?

  Hello:

  The problem is that you must incorporate the necessary sata ahci drivers for windows XP to see the hard drive.

  Has Windows 7 and XP is too old an operating system to make them.

  Read the info at the link below, section of Intel and then read the downloadable PDF document for instructions on how to integrate all the drivers.

  http://h30434.www3.HP.com/T5/notebook-operating-systems-and-software/SATA-drivers-for-XP-solution-on-0x0000007B-BSOD/m-p/114120#M17758

  The only other way to install XP on this model is to go into the bios, the storage section and change the setting of sata ahci to ide emulation, save the setting here and once again, when you go out.

  The problem is that if you do this, you cannot change the setting for the preferred setting of DCIS, unless you know how to install the correct ahci sata driver after installing XP from the controller.  If you try to just change the setting back on ahci without having to install the controller driver, the PC does not start upward.

  Try "slipstreaming" the drivers first and if you can't swing, install XP in IDE mode and I'll help you get the drivers installed, so you can change the BIOS to ahci setting.

• Drive HARD recovery failed, Qosimo does not start with BOOTMGR is missing

  Hi all

  I recently used the Toshiba HDD Recovery thing to restore my laptop to factory settings, while he was doing this he popped by saying: she didn't, I rebooted and boots up logo Toshiba then comes to a screen with just BOOTMGR lack ctrl alt delete to restart. Anyone know how I can fix this problem so it does not once more?

  Laptop is Toshiba Qosimo X 500-149

  Thank you
  Harry

  Hello Harry

  HARD drive recovery image is screwed up and you will not be able to start over. Only way to install the Toshiba recovery image is to use the recovery DVDs. You have created a following Toshiba Recovery reminder?

  Here is the original post of callback:

  + Important INFORMATION +.

  + Your system is equipped with a hard drive recovery system. If you need repair your computer in the restaurant to original factory State, you can do so directly from the hard disk (press F8 when you start your computer, choose "Repair your computer" and follow the instructions in the menu) or create a media drive bootable recovery to that end. +.

  + * Toshiba recommends you create recovery disk medium using the "Toshiba Recovery Disc Creator' to ensure that you are able to restore your computer to the original, factory-installed state even if your computer is seriously damaged.* +.

• Satellite A660 - 11 M - drive HARD recovery is not possible

  Hello.

  I bought the satellite A660 - 11 M two months ago. A week before, he started to cause a problem that when turned on, boot HARD drive is not possible in the first place and boot priority option page is shown. Only after that I have reset a start command, it started.

  To resolve this issue for good, I decided to format the HARD drive using the HDD recovery procedure. Unfortunately, I had to cancel this procedure after 2 minutes, and the start-up is not possible at all since then. He continues to display the message "Boot failure" etc. and staging to the BIOS screen. So, I can not access the recovery procedure even if I keep the F8 key. I am afraid that a recovery on the HARD drive partition can have been damaged due to the forced cancellation.

  I have not created a DVD of my own laptop recovery, and the only option seems to buy one from Toshiba (https://backupmedia.toshiba.eu/landing.aspx). Before you order a recovery disc, I would ask if my problem can be solved using the disc. Anyone who has experience with the recovery disc could advise me? Another question is to know if a standard warranty let me send to Toshiba ASP? Thank you for reading.

  Hello

  > Another question is to know if a standard warranty let me send to Toshiba ASP?
  Warranty only covers hardware issues.

  Question you seems to be related to a software problem.
  Therefore, I doubt that installation of the OS would be covered by the warranty.
  You should order the recovery disk and must attempt to define the notebook back to factory settings.
  Then you should check the features of the laptop.

  Good luck

• Installation of drive HARD recovery does not start on Satellite P300-150

  I have a 2008 Satellite P300-150 I want to restore factory settings.

  I followed the steps described in the manual of s to do it from the hard disk (F8 at startup), however, when I try, a screen will appear with a warning with the topic box"system recovery options"then below says "cannot start the installed program. Click ok to turn off the computer.

  I don't know m which is better to do it now if someone could suggest another way to do this, I would be very grateful.

  Thank you

  The situation is quite simple to explain. Recovery image installation can be done on two tracks:
  -using the HARD drive recovery or
  -using the create recovery DVDs.

  I put t know if you created this disk after advice from Toshiba, but if you use for the installation of operating system.

  By the way: Satellite P300 works perfectly with Win7 32 bit, so if there is a way to install do. It works much better than original Vista.

  If you have any other questions you are welcome. ;)

• Satellite C660-172 and drive HARD recovery plant

  I removed the operating system on the C drive in my laptop and now I want to use recovery disc HARD to re - install the recovery again
  Can I know the right way to do this!
  Thank you.

  I don't know how you removed the BONES of the partition C and what exactly did you do and I m a little skeptical that it works, but you can try anyway.

  Do it as described in the follow-up paper - http://aps2.toshiba-tro.de/kb0/HTD1303440001R02.htm

• Re: Satellite A300 - 27H? Do I need to drive HARD recovery partition after the creation of DVD

  I just created my recovery two DVDs for my new computer and I want to know if I still need my 113GB partition on my computer?

  Hmm.
  The recovery disk would fix the laptop back to factory settings, this means that the recovery disk would be to format the whole HARD drive and would create the same partitions as the first day of purchase to create also the recovery of HARD drive partition too

  So I think you could remove it if you n t want to have this partition on your HARD drive

  See you soon

• Satellite L670D pirate, drive HARD recovery does not work

  Hey guys,.

  you have the following problem: My L670D hacked by some * s and now I'm still trying recover the power. I heard about Toshiba HARD drive recovery, which should work by pressing F8 during startup. I tried several times, but I think something went wrong and nothing happened.
  Can someone help me by telling me where my mistake is? I want to just my laptop back!

  For those who encourage me to install Windows again: I have not any DVD, cause he was already on the laptop when I bought it (Win 7 64-bit).

  Please please please help me!

  Merry Christmas to you all!

  Gr4phixX

  Hello

  As described HARD drive recovery work on follow Toshiba document -.
  http://APS2.toshiba-tro.de/KB0/HTD1303440001R02.htm

  Try to please and send some comments.

• Satellite L850: Drive HARD Firmware problem prevent data recovery

  Am a little confused and need a simple explanation
  My HDD L850 died under warranty and was sent to the people of data recovery to recover the data before entering new drive under warranty.

  I am told that my hard drive has a fairly unique combination of firmware and the drive that prevents the recovery until they get this firmware. Now 6 weeks after it happened I stll wait.

  Someone in support could explain to me in simple terms, why this firmware is the problem cause and so far can only be obtained by your partner data recovery company?

  Hello

  I think that you will here get a correct answer, why the people of data recovery needs of these packages since it is a user forum.

  But to my knowledge all the 2.5 hard drives and SSD drive supports various firmware.
  These firmware tells the hardware how to interact with the operating system.

  It seems that people in data recovery needs these packages in order to get access to the HARD drive, and I presume, without the compatible firmware, it is not possible to recover the data.

• Drive HARD recovery does not not for Satellite Pro L450D-12 x

  I have a laptop that I'm fixing for a friend.
  According to toshibas official specification it is than a HDD recovery partition which is hidden.

  For a reason unknown to me, now the 0 (zero) key does not work. F8 does not work either and the windows system restore does not seem to get me there either.

  Can someone please explain to me why this is happening?
  Nobody ever touched the hard drive on the alleged recovery hidden partition which is toshibas official specs 100%...

  Anyone share a few ideas with me here please

  Kind regards
  Andrew

  Hello

  The HARD drive recovery partition is not hidden
  In my case the image files when placed on the second partition in Toshiba HDD folder.

  However, the fact is that HARD drive recovery could be launched by pressing the F8 key, and then choose the option called repair my computer and in a new window the recovery HARD drive option should be chosen.
  If this is not possible, then you will need to retrieve the laptop using the recovery disk.

  I guess that this disk is not created in the past. Right? You can create the disc using the recovery disk creator which is preinstalled on all Toshiba laptops.

  If this is not possible, then you must order the CD here:
  http://backupmedia.Toshiba.EU/landing.aspx

• Drive HARD recovery failed

  Hi all

  I just tried to do a factory reset on my satellite netbook (which I've done a few times before), but it failed. I got as far as the system wipe, but got an error saying that there is no current backup.

  To restart, I am unable to access the utility and get an error saying no BONES found.

  I have another version of windows knock around, so used quepour starts the machine. I can see the partition containing the files of recovery is still present and the files are still there. Anyone got any ideas how I can use it to restore my computer?

  I have all other backups and I don't want to order recovery disks (my machine has not in any case of a hard drive).

  Any thoughts or ideas would be apprecited.

  Thank you!

  Problem, is that there are not any special trick or workaround to force the installation of HARD drive recovery. Maybe it sounds stupid now, but either it works or not. Of course, there is a reason why it does not work. I don't know what have you done with your machine so can just speculate what may be the reason.

  Like many other people you've made big mistake: you didn't create recovery (DVD or USB) media. The user s manuals document, clearly describes how it can be done and why. These created recovery media can be used if there is problem with the installation of recovery of HARD drive or what HARD drive fails and must be replaced by a new one.

  Sorry, but I don't see a good option for you now.
  By the way: why you won't restore disk original order?

• Re: Satelite C850-B516: copy data drive HARD recovery after changing the partitions

  Hello

  Forum need help once again

  I split single partition came with my laptop to have data in a separate partition. I wasn't aware that it will affect. I have not created any backup CD. No, when I run HARD drive recovery media creator I get error "NO HDD Recovery Area.

  I can see a healthy partition of 10 GB on my drive and disk partitioning tools are evidence of the data in it.

  I copied to the Active primary partition of USB. But when I boot from USB, he leaves everything recover.

  It comes

  Can I recover my system to factory default using the recovery data copied?

  Concerning
  Ahmed

  Toshiba Satelite C850-B516

  # Problem, it is that your recovery image is useless now. When you want to use the external device for installation of recovery image is must be created as device start and it can be done if you use the preinstalled recovery media creator.

  Recovery image is saved on the HARD drive and fixed with the so-called markers. Recovery media creator can find these markers and start using the recovery saved on the HARD disk image. After changing structure of HARD disk partitions these markers disappeared and this is the reason why you see this error message.

  I'm afraid you must order now new recovery m FRO Toshiba drive and you can do it on - https://backupmedia.toshiba.eu/landing.aspx

• HP ENVY DV7-7203SA: problem starting and drive hard smart error

  Hi Ive had problems to start my computer laptop dv7 envy.

  When I run the diagnostic test on the hard drive get a smart error RU5WJO-6K27T-QFPK1F-60AD03 id C1w33EA #ABU

  Finally I have to start, but a few times I had a no device found startup, but only once did I need to reinstall windows 10

  can any body advise on what means this error code and should I look for to replace the hard drive

  concerning

  er65

  HERE IS THE MANUAL for this PC.  Replace hard drive starts on page 48, but indicated that 56 in the area of the manual drive.

  In this same page 100 reported in the box as 108 States "light up the computer or restart the computer, quickly press ESC, then press F10.  This is part of the BIOS information.

  The set of recovery disks will be back as 'new plant' just as it came when new.  No other software is required.  If M$ Office has been installed, maybe check if the disk key and products are always available.

  To the extent where the SSD, do not have the recovery disk set up to automatically accept that in the PC when you run the recovery disk set.  You can try, but I expect to say that the computer has changed and he does not meet the conditions to use the set of recovery disks.

• Driver hard disk error

  Hello!

  It is not a hard drive error, that I don't know hard disk is in perfect condition according to CHKDSK.

  It is just a minor nuisance under the settings of PC peripheral hard drive WDC WD300HLFS is, show with a rather alarming message pilot error below. So I assumed that there is a problem with the installed driver. I went to the Device Manager and find the hard drive. Here, it is declared as this device does not work correctly.

  What could be the cause of the error of driver?

  Hello!

  It is not a hard drive error, that I don't know hard disk is in perfect condition according to CHKDSK.

  It is just a minor nuisance under the settings of PC peripheral hard drive WDC WD300HLFS is, show with a rather alarming message pilot error below. So I assumed that there is a problem with the installed driver. I went to the Device Manager and find the hard drive. Here, it is declared as this device does not work correctly.

  What could be the cause of the error of driver?

  laptop / pc comes sometimes with new hard drive controller drivers... go to the manufacturing site and check if the additional disk is available and if it is available, try to install that