Satellite L - water damage and the laptop does not light

Similar Questions

• my power green LED flashes and the laptop does not start

  Mr President, I have laptop computer Sony vaio, when I press the power button, my power LED green light begins to blink, sometimes sometimes brighter Sun, but nothing else happened, my fan remains closed, screen remains black, just POWER green LED flashing, flashing in the same way as orange light flashes in case of in standby mode, it is usually solid green , but now it flashes and the laptop does not start, what should I do Sir...

  My model number is the model of Sony VAIO PCG-61911W... His VPCEG18FG of the product name

  ankurgupta53,

  It seems that your device is not post.  You can try reinstalling the ram or simply by using a single module at a time, but other that that the device would need service...

• HP Envy 15 "touch screen power LED appears, but the fans does not and the screen does not light

  Hello!

  I'm a student in computer engineering at the University of Waterloo 1A, and I run a very serious problem with my HP Envy 15 "TouchSmart laptop computer running Windows 8.1. It is a problem that just started today, and I'd rather have a first support here before going to see the technical support Office sometimes tomorrow. It has to do with the screen and the fans where the Power LED lights in white, just as when the laptop works properly.

  (I have warranty on the laptop when it was purchased last June, except that if I find that I need to get a replacement, I'll lose all my work, I did on that since I started my semester.) It's so silly of me not to have all my work saved on a backup, because I have an external hard drive. Problem is, I've had too many problems in getting myself organized, I'm not being open-minded as I should, and worse, I'm not a balance between life and work at home.)

  Before I had my MATH 117 conference (Calculus 1 Engineering), I was in a nearby lab where my laptop was open and turned, works correctly. I've had NetBeans IDE running since I wanted to work on the second part of my current assignment of CS 137 (principles of programming). Because it was almost time for my presentation, I closed the laptop by simply moving the screen down on the keyboard, where it goes into mode 'sleep'. (Whenever I flip to the top of the screen, the laptop is supposed to return, and the sliding screen of Windows 8.1 connection will appear.)

  When I took my seat for reading, I wanted to spend a little time to work on my programming assignment. However, after the reversal of the screen to the top, instead of having the login screen appears, I encountered the problem: the power supply light is showing a white light, but I don't hear the fans between the ventilation openings on the left side of the laptop and the screen does not light. I tried to take the power for several seconds and once button at least 10 seconds, except that the power light continues to display on a white light. The Commission of the Wi - Fi light is not displayed.

  Whatever it is, I don't want to take out the battery because I have that on my last laptop, and it's from there that I couldn't turn to the former, a new market. If I leave the Envy laptop battery, it will short-circuit the connections between the battery and the computer, and so several components will FRY. For now, what I do let the laptop is to empty the load on the battery. Then, once I noticed that the power light does not project a white light, or plug in the AC adapter and try turning the laptop on the power button.

  It will take a little while for the circuit drain the load on my battery but...

  Anyway, please would you be kind enough to help me with this problem? I would really appreciate if you can give me several recommendations. Thank you!

  Hello @GregPDesWHP,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I read your post on how your laptop is not on, and I'd be happy to help you in this case!

  In order to restore the features of your computer once more, I recommend you follow the steps described in this document on the computer does not (Windows 8). If the problem persists after having exhausted all the steps in this document, I recommend you contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number.

  http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  I hope this helps!

  Concerning

• Arm, wrist and the screen does not light.

  I just wanted to give a few comments. When I walk, carry heavy bags and I want to watch the time I lift my arm to look at my Apple Watch and the screen does not light. Maybe its because the movement of the arm is subtle, since I am carrying heavy bags. I was wondering if that could be repaired since both times I tried it, annoyed me. Walk in a street busy NYC with my groceries, I would like to know something, briefly, on my watch as I walk with the duty to stop or to disembark the bags.

  Hello

  It is a community of support based on the user.

  To make sure that your comments and suggestion are presented to the attention of Apple, you can submit the following form (all comments are read by Apple):

  https://www.Apple.com/feedback/watch.html

• Satellite P300-1CN - system and the BIOS does not start

  Hello!

  I have a problem with my laptop Toshiba Satellite P300-1CN. When I start my laptop does not start in Windows.
  When I tried to go to BIOS, doesn't let me do as well. I can see only the Toshiba logo. When I press F2 or F12 I received the message:

  + Enter in the configuration. Please wait + or
  + Entering the MultiBoot Menu. Please wait +.

  I tried + ESC +++ Power Buton + then + key + F1. I can see all the information:
  + Phoenix Bios 4.0 release 6.1 +.
  + Cpu = 1 processor detected, cores per processor = 2 +.
  + Intel Core 2duo T5800 @ 2.00 GHz +.
  + 3070 M RAM passed system +.
  + 2048 KB L2 Cache +.
  + Shadow system bios +.
  + Video Bios shaded +.
  + Fixed disk 0: Toshiba MK2552GSK +.
  + ATAPICD; ROM DVDRom... +.
  + Mouse initialized +.
  Press F2 to enter Setup or press F12 to enter MultiBoot Menu selection.

  but after the computer laptop just gel but the processor is still running.

  I removed the HARD drive and tried to put different the a (work laptop) - still does not
  I removed the memory and tried to put different the a (work laptop) - still no job

  I have no idea what it is causing the problem.
  I have this laptop over a period of 2 months.

  Thank you.

  > Looks like I have to make a phone call to the Toshiba Support Centre
  You must enter in Toshiba authorized service provider contact such as suggested by Luke above
  All the details can be found on the Toshiba page. (the path above will point you to the ASP database)

• Re: DVD recorder has changed and the laptop does not recognize

  I had to change my Toshiba Qosmio F20 portable recorder.
  Now, the computer does not recognize.

  I installed a DVD burner Sony Optiarc AD - 7590 IDE.
  I heard that the problem may be in the BIOS, I have the latest TOSHIBA for this laptop (which is installed V.1.40 2007) and the recorder comes with the manufacturing date of 2009.

  I currently use Windows 7 on this computer.
  Is it only possible for the computer recognizes it, "any driver or driver I install?

  Hello

  Talking about this laptop doesn't recognize, do you mean on the Bios or Device Manager or both?

• Satellite M30-604 freezes and the fan does not work after replacing

  Satellite SM30-604. Laptop has left the mat from one day to the next and overheated! Fan won't spin and laptop start only occasionally. Thinking that the fan was fault I replaced the fan but even this new fan doesn't spin. The heat sink is totally clean - dust free inside the fins at all. The laptop is only 2 years.

  Cooling using forced (by sticking a nozzle of aspiration to the output of the cooling fan!) the laptop starts sometimes as normal until the desktop screen with all of the usual icons and no error message. But then, it does not further - the freezing of the screen, keyboard and mouse.

  Most of the time it does not start at all. When it does not start, the blue LED lights up but there is no hard disk activity or LCD at all - even the wifi LED lights even.

  Really grateful if someone knows what's going on. You are not sure if it is the main processor that is defective?

  Thanks in advance.

  Charlie

  Hello, Charlie

  As you know on this path is not easy to give an accurate diagnosis, but according to your assignment, I guess there is a complex problem and unit must be properly verified. I also think that there must be a problem with the electronics.

  It is really possible that the motherboard needs to be replaced but, as I already said, it is not possible to say something specific about your problem. Try contacting Asp and you will see what they say.

  Good bye

• Satellite M70 - 170 - Touch and the launch does not work

  Hello everyone, I'm Sylvain and I'm french, so sorry for my English...

  I have a Toshiba Satellite M70-170, and I have a problem with the program "Hit and run" (1,2,9,0)

  I see the icon then the clock and I can change the settings, but when I press the button of the mouse will work, but not to the touch and launch...

  Can you explain why?

  I love this commercial and I want to know why it does not work.

  I put t know why the touch & launch does not work, but I would try to reinstall again.
  The Touch & launch is placed on the European driver Toshiba page.
  This time it s a v 1.2.9.0 for Win XP.

  Uninstall first touch & launch and after restarting again install it again!

• I have a mac book pro 2009 model, now when I try to load it, there is no green light on the adapter and the laptop does not charge. Not sure if there is a problem with the card or the battery or the laptop. Kindly help

  I have a Mac book pro 2009 model, when I try to load it it not there no green light on the adapter and he is in charge. Not sure if there is a problem with the adapter or the battery or the laptop. Kindly help... Thank you

  Have you tried:

  Portable Apple computers: Troubleshooting MagSafe adapters - Apple Support

  This is the Office Mac Pro forum. I asked that your post be moved to the MacBook Pro laptop forum.

• No battery indicator and the laptop does not shut down after closing the lid

  After returning from my lapyop return to caused by a virus factory settings I can't have my defiler of battery on my taskbar

  and also I got my lap top programmed to close on the cover but can't find where to put in place

  Hello

  I suggest you to visit the web link below to change the change the power button cover option.

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-what-happens-when-you-close-your-mobile-PC-lid

  Once you have visited the link above, try the method to display the power plan options and then search forcover and the power button and choose your preferred option.

  Hope the helps of information. Please post back and we do know.

• the laptop does not light

  Hello

  Irecently tried to turn on my Hp Pavilion DV5000 laptop.

  The blue light but the computer is not.

  Do you know what the problem is.

  Thank you

  var123 wrote:

  Hello

  Irecently tried to turn on my Hp Pavilion DV5000 laptop.

  The blue light but the computer is not.

  Do you know what the problem is.

  Thank you

  Are what blue light you referring?

  Try a hard reset:

  Remove the battery and unplug the DC power adapter.
  Press and hold the power button for more than 15 seconds.
  Plug the DC power adapter (leave the battery for now)
  Press the power button

  Best regards
  ERICO

• Printer and the laptop does not

  I had a virus on my laptop. He had fixed to the now I want to print a document to the printer sent and a message says unable to communicate. The printer software reinstalled unplugged usb cables. Only one other element is fire. And I don't know where or how to check this.  I have a 17 dell studio and a printer of dell V505w.  Everything worked fine until I took it to the geek squad. Thanks if anyone can offer assistance.

  On Monday, December 13, 2010 03:24:16 + 0000, 57vwbuggy wrote:
   
  > I had a virus on my laptop.
   
   
  What virus was it? How did you know you had it?
   
   
  > Had it fixed
   
   
  Who sets it? How did they solve this problem?
   
   
  > now I want to print a document to send it to the printer and a message says unable to communicate. The printer software reinstalled unplugged usb cables. Only one other element is fire. And I don't know where or how to check this.  I have a 17 dell studio and a printer of dell V505w.  Everything worked fine until I took it to the geek squad. Thanks if anyone can offer assistance.
   
   
  Ugh! The Geek Squad! Geek Squad, in my opinion (and that of many of)
  others among us here) is among the worst possible places for computer
  advice service or the computer. They are largely incompetent.
   
  If they are the ones who 'fixed', no doubt they did not set
  they have screwed up. Without knowing exactly what they were doing, it will be
  very hard to advise you other than what you probably now
  need to do a clean reinstall of Windows and all over again
  from scratch.
   

  Ken Blake (MS-MVP)

• My Toshiba Satellite L675D - S7042 Webcam and the microphone does not work

  Help, please

  Moved to windows

  Hello

  Welcome to the Microsoft community.

  What version of Windows are you using?  Windows Vista, Windows 7 or 8/8.1?

  Is that you improved your system to 8.1 of Windows from a previous version?

  How to uninstall the software:

  1. From the start screen
  2. Type in the Panel
  3. Click on Control Panel (make sure apps is selected)
  4. Click on uninstall a program under programs category.
  5. Find TOSHIBA Web Camera Application and double click it.
  6. Complete uninstallation suite at the direction of the screen.

  Access TOSHIBA support website to obtain the last component to install.

  1. Go to http://support.toshiba.com/drivers
  2. Enter your product serial number
  3. Press GO
  4. Select the camera under filter by
  5. Select Windows 8.1 (64-bit) under filter by
  6. Click on the application of WEB camera at the top of the list
  7. Click Download
  8. Install the application by following the instructions on the screen

  Method 1: Open the troubleshooting of Audio recording

  http://Windows.Microsoft.com/en-us/Windows7/open-the-recording-audio-Troubleshooter

  Method 2: Audio recording in sound recorder: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/recording-audio-in-sound-recorder-frequently-asked-questions

  Method 3: When the sound card is installed, the microphone is also installed and uses the sound card drivers.

  Please try to uncheck the option put the microphone muted in the sound menu. If the problem persists then uninstall and reinstall the sound drivers.

• When I push the power button on my laptop the lights blink but the laptop does not light

  original title: what is the problem?

  When I push the button my laptop the keyboard lights flash on and then go immediately, that it never comes to the top at all.  I want to know if this problem is fixable or trash?  It's a hp model w/double older processors

  Hey cgmartlynde,

  Try to charge your laptop and then see if it boots.
  You can also take a look at this article to help maximize the battery life:
  http://www.Microsoft.com/atwork/maintenance/battery.aspx
  I hope this helps.

• HP dv7-3085dx power light flashes, but the laptop does not work.

  Hello! I have a HP Pavilion dv7-3085dx. It has a hard drive Bay 2.

  Recently, I bought the caddy + cable kit and an Intel SSD. The thing is, when I plug the sata cable to the motherboard for the laptop, and the SSD to it, the laptop does not light. When I press the power button, it flashes once (the power LED flashes once), but the laptop does not light. When I press again, nothing happens.

  I tried to remove the power supply plug, battery and plug it all again, but the power light flashes once (when you press the power button) and no reaction.

  Maybe it's the sata cable: when I remove the new cable and connect the SSD with the sata cable on the 1 hard drive Bay (the cable supplied with the notebook), it works fine. The laptop starts. And when I connect the former sata cable, with the SSD on the second hard drive Bay, it also works.

  I just want to now what is the flashing light means light? Why it does not work with the new cable?

  Thanks in advance! Sorry for my bad English...

  Emilio.

  It is possible that this is a problem with the kit. I would recommend to download and install the latest BIOS update for your laptop, using the download at the following link: http://goo.gl/rbHkg

  If it still doesn't work after that, I would recommend to suppress the kit for a replacement or to try another.