Satellite L - white screen after the closure of the programmes

Similar Questions

• white screen after the signing, the

  I have a laptop HP 2000 who now has a blank screen after I connect. I've removed ask.com because it never works and when I restarted my computer I get this white screen after the signing, the. I can still see my settings or start menu. What can I do to solve this problem. Help, please.

  Hello

  Try the following.

  Boot the computer normally and log.

  Black screen, old the ctrl and alt keys and press delete.

  Select Task Manager.

  Click on file and select the new task.

  Type rstrui - also enter a tick in the box for "create this task with administrative privileges" - and click on Ok.

  When the system restore interface is loaded, choose a restore point at least 48 hours before the opening of the session the question first and then proceed with the restoration of the system.

  Kind regards

  DP - K

• Satellite P300 - white screen after waking from sleep state

  I'm having this problem:
  The LCD screen may be empty when the computer is "awakened" from the sleep state. Nothing is visible on the internal LCD or an external monitor.

  There seems to be a solution:
  An update of the firmware for a component in the main circuit of the computer solves this problem. This update must be performed by an authorized Toshiba (ASP) Service provider. Until arrangements are made for the update, restart the computer by pressing the power on button for a few seconds.

  described here: [white screen after awakening from fallback status | http://www.csd.toshiba.com/cgi-bin/tais/su/su_sc_dtlView.jsp?soid=1642844&moid=1209152]
  -----
  I also found this, but it didn't really help me much further.
  [Satellite P200D and WinXP: no display after waking from sleep mode | http://forums.computers.toshiba-europe.com/forums/click.jspa?searchID=880412&messageID=118143]
  -----
  In fact, I think I'm able to solve myself, and I don't like not my laptop to be gone for two weeks or more. I just need some advice on where to find a correct upgrade. Is - this driver BIOS or graphics? Which version should download, where... etcetera. More tips on how to solve the problem are also welcome.

  -----
  Edit: link and no need for words of line. : s
  Edit2: grammar correction.

  Hello

  > An update of firmware for a component in the main circuit of the computer solves this problem. This update must be performed by an authorized Toshiba (ASP) Service provider. Until arrangements are made for the update, restart the computer by pressing the power on button for a few seconds.
  If you check the Toshiba document you would see that your Satellite P300 is not related to this issue.

  In your case I would recommend upgrading the BIOS and graphics driver.
  In addition to keep your operating system up-to-date.

  I had this problem under Win XP and a MS patch and an update of the graphics card driver helped solve this problem.

• Satellite M70 - black screen after the installation of recovery

  So far, what I did is put in the Recovery DVD - ROM product. Then when my computer restarts I was invited to restore my computer failing and said. After that he went through this process, that he told me to remove the disc that I did. Now he only get a black screen after the Toshiba screen that gives me options f2 for Setup and f12 for options.

  I don't know what to do now to make my laptop works again. Help, please.

  Hi Zach_1,

  Have you tried to launch the installation of recovery again? Maybe that something was wrong during the first installation, it might have arrived
  Then retry the recovery facility and see what happens.

  If it doesn't work you should try a normal Microsoft disk so determine if the problem is related to hardware or recovery disk.

• Satellite M50 - white screen after login on Win 8.1

  Satellite M50 running 8.1 Win
  After login, download mouse white screen, but nothing else.
  Can run Explorer.exe manually via the the Task Manager for go, but some applications like Acrobat and Windows Mail does not work.

  I searched online and tried all sorts of fixes suggested without result.
  Any suggestions gratefully received!

  I don't know what the problem is here, but you can try to Win8 will stop completely and check the repair options. Try again with the system restore and roll back the OS a few days back. Maybe this will help.

  http://APS2.toshiba-tro.de/KB0/TSB2A03ES0000R01.htm

• Satellite C855 - white screen after BIOS update

  Hello

  I am a beginner user,
  I have Satellite C855
  Yesterday, I downloaded a 'update BIOS"that was sent to my computer.
  Since that my screen is blank, there is a hum in the background.

  I have a recovery back up on my external hard drive, but of course, the screen is blank so I don't know how the product.

  I think I must have downloaded a model or the update was not compatible.

  Hello

  White screen do you mean that nothing appears on the screen?
  You see the start screen of Toshiba, or if you are able to access the BIOS?

  Where this is not possible, try this:
  Disconnect the power adapter, remove the battery.
  Press and hold the power button for about 30 seconds.
  Then connect the two parts (batteries and AC adapter) for the laptop and try to turn on the unit.

  In case this would not solve the problem of the laptop, I'm scared of m the BIOS update was not completed successfully and I think that only authorized Toshiba service provider would be able to help you.

• White screen after the upgrade, thoughts?

  Hello

  I have a mid-2011, 21.5 "iMac. When I upgraded from Yosemite to El Capitan, I got the white screen of death on restart. I saved time machine, reinstalled, and everything was fine. When I did the update niveau.1, the same has happened (white screen, then backup, and then reinstall) and now, last night, after le.2 upgraded the same story happened.

  When I run on the armored white mac disk utility, it shows all the hard drive as being full of the 'other', which is certainly not, but the drive is labeled as OK.

  Before I try reinstall, I want to know: what am I doing wrong? I'm upgrading via the App Store, I don't have a hackintosh, no illegal absurdity, etc.. But this problem is boring and repetitive, so I figure there must be something I do. Any thoughts?

  I got a grey screen for a few minutes, I came back a little later and I was looking at a login screen.

  The whole process has been about half an hour.

• White screen after the Fail Safe Mode - XP, graphics, nVidia, graphics card

  Recently, my office computer Gateway running Windows XP was invited to update the nVidia GEForce 6100 driver.

  I went to update this driver.

  On the next boot, I waited several minutes, but the computer hung up on a screen empty AFTER the Windows screen.

  I tried to restart the computer normally several times, but still and always the white screen appeared after installing windows.

  I have my computer in Mode safe start, which I did. In safe mode, I disabled the graphics driver nVidia and restarted my computer. To restart the computer, it has actually reached to explore. However, in all the windows, I opened the image lag. Instead of a fluid scrolling, everything has been hectic.

  I have to enter the BIOS setup and clicked to start my computer in mode 'fail safe '. Afterwards, when I press the power button on my computer the blue light turns on, fan is running, and a single beep of the singular but NO picture on my monitor.

  I tried my monitor on another computer and it worked fine. I plugged the monitor into the gateway PC and yet, I get a black screen as if the Office Tower does not recognize the monitor.

  I thank you very much for any solutions or advice, you should be able to provide!

  All the best,

  -Evan

  Hello

  Please restart in safe mode, and then do the following

  Start - right click my computer - manage - Device Manager - adapt display - nVidia...

  Right click - Properties - driver tab - back driver.

  This should bring back your previous working driver.

  Please keep in mind that my answer is based on the information in your message. More the better I can answer, Slan go foill, Paul

• Monitor turns to white screen after the screen saver

  Actual title: white screen

  Yesterday, I started to have a white screen on my computer screen shortly after the appearance of the screen saver. Monitor still works but this means it will come out? Screen stay white throughout the night.

  Hello

  (1) do you have made no changes before this problem?
  
  (2) do you use pictures as a screen saver?
   
  See the below link that supports you in updating the graphics driver and check if the problem persists.
  
  Method 1: Update a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly
   
  Method 2: Hardware devices do not work or are not detected in Windows
  http://support.Microsoft.com/mats/hardware_device_problems/en-us
   
  Method 3: You can also try using a different screen saver and check if that helps.
   
  Hope this information helps.

• Creative cloud Packager white screen after the Adobe ID Login

  I downloaded the packer of cloud creative on the site of volume license and got installed.  After the installation of the package Manager runs and asks me to connect with my adobe ID.  I connect using the same ID I used to download the package manager that has access to all the license information for our Organization.   I chose the option to connect business/Government.   Once I have connection, Packager of cloud is just a blank white screen.  I left it for hours the other day.   Any help would be appreciated.

  I just solved this problem for another client by following the steps described in this knowledge base article:

  http://helpx.Adobe.com/creative-cloud/KB/blank-white-screen-CCP.html

  Note that the offending special characters can be anywhere in your information to Adobe ID, not only your e-mail address and password, but your name, company name, etc.. We plan to address them in a future release of the Packer, but I have no time frame that I can share.

• White screen after the fact fingerprints

  My startup procedure is fine, until I read "swipe" and do it. Then my screen turns white, except the cursor keys and "The Shield Deluxe" in small print at the top of my screen (which is the virus checker that I use).

  I struggled with this for hours, turn on, off and go through the boot process. Always the white screen. At this point, I moved the computer and suddenly had a full desktop screen, as usual. Clearly, everything is blowing away there, simply do not show, because I got a message saying that Windows updates have taken place and I need to restart the computer. I did, and guess what, blank screen again. And since.

  
  

• White screen after the Satellite Pro P200 display driver update

  I installed the latest display driver ATI Mobility Radeon HD2600 (8.432, on the site of Toshiba through Tempo) on my Satellite Pro P200 yesterday. Reboot, everything seems good as much as the screen "Please wait...". "Windows Vista professional, but instead of showing the page of connection I get an empty screen (with a mouse cursor that moves around as usual). All I can do at this point is to be able to, and I'm running out of ideas on how to move forward.

  Things I've tried:
  # start in safe mode, the video resolution or last known good configuration, result the same screen empty.
  # connect to the system using remote desktop (to disable the driver) is not possible because the system has not yet loaded the network drivers.
  # I can't go back to a restore point because Vista can't find (I did a manual after you install updates windows over a couple of days).
  I can run a system command line options of recovery and prefer to use it to disable the driver + if + I knew how before the use of the more radical options.

  A search on the web (http://www.google.co.uk/search?q=ati+catalyst+vista+blank+screen&hl=en&sa= N) reveals that this has happened on a wide range of laptops with
  previous versions of the driver, but none of the links I've looked at to give a solution which does not exist for me.

  I agree with Hairyfool, you who should solve problems using an external display. If no image appears, then something with the material might be.

  Please give some information about your situation...

  See you soon

• Satellite C660 - white screen after instalation image recovery

  Strange problem. My Satellite C660D-1FM was a bunch of updates from Microsoft (did not updates for centuries as it was used by my daughter and not connected to the internet) and after completing it restarted and I got the Toshiba splash screen and nothing. Holding F8 gives the same problem, tried turning the key '0' and that was the same. Connected to an external monitor and it's the same thing. I can't get into the BIOS and everything seems fine.

  Then, thinking that the HDD is maybe defective I mounted another drive hard and fully installed Win7 on a Microsoft DVD (SP1 and all updates) and everything works. Then, I thought I try and restore the laptop to factory settings by default using Toshiba DVD recovery which Id created. Worked well during the installation, all the installed DVD 3 and he's gone through the procedure installation, portable got at the end when he tried to restart it, rebooted and now back to the same error - Toshiba start screen is ok, but then he'll just empty. To convince me that I wasn't going crazy I then reinstalled Win7 my DVD of Microsoft and he moved very well, did all the updates and worked all day today with no problem.

  Someone at - it an idea of what's going on?

  Hmmm... something like that shouldn't happen.
  Do you use the recovery disc for the first time?
  Have you noticed the same result on both hard drives?

  Problem is that there is not much to do about it and there is no way to change it either in recovery installation runs, or later during the installation of windows is underway.

  Try to set the BIOS to default settings and simply try to reinstall the recovery image.

• Satellite C660D white screen after BIOS update

  I ran the update of the BIOS on laptop Satellite C660D PSC1YE recommended and he appeared to succeed, but when it restarts the screen won't turn on. I tried a few things to fix, but nothing worked.

  Tried:

  • connect an external monitor via VGA - white too
  • remove the battery of the CMOS button
  • removing a hard drive startup, to replace again
  • a short-circuit the J1 jumper under RAM slots

  What else can I try?

  Here is the windows bios update program:
  http://Support1.toshiba-tro.de/Tedd-...0601184846.zip

  Try to start with the battery.

• Satellite C55 - white screen after login

  After having started and enter my password, I get a blank screen with just the visible arrow.
  Can someone help me please?

  Try to access the BIOS by pressing F2 button and check if the BIOS would be visible on the screen.
  If it is visible, your problem could be related to problems of system and generally system repair or new recovery system should fix this.

  The original Toshiba using preinstalled system; It should be possible to perform the procedure of HARD drive recovery.
  Press F12 all turn on/off the unit.

  Now you should see the start menu containing all bootable devices. The last option should be HDD Recovery
  This option set the laptop back to factory settings.