Satellite L10 - 102 - battery monitor programs do not read the batteries

Similar Questions

• Satellite P200-140-CD/DVD drive does not read the CD

  Hi all

  I have a Satellite P200-140. The DVD/CD Player plays all DVDs without problem. However, it does not read CD. A message 'no disc' appears.
  I've updated the drivers, cleaned the lens, completed all the normal tasks.

  Any advise / solutions out there?

  Hello

  Maybe you should try to remove the capital letters and lowerfilters in the registry, because you can often read here in the forum:

  (1) run regedit (Start-Run-Regedit online online)
  2) navigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class {4D36E965-E325-11CE-BFC1-08002BE10318}
  (3) in the right pane, delete the "UpperFilters" key and delete the key "LowerFilters".
  (4) restart.

  I hope this works for you too! :)

  Good bye

• Need of energy saving for Satellite L10-102

  Hello

  I want to ask whether it is possible to use a software energy saving with my Satellite L10-102 model?

  I tried software standby of an A55-S306 power but the software checked first is the appropriate model or not and then also failed.
  Where can I find the software of standby power for my laptop? If I can't find so why the other models, but L10 didn't Eve software power?

  Thank you...

  Hello

  You re right. This unit has been delivered without the Toshiba power saver. It uses Microsoft Windows power options.
  I put t know why the energy saver is not designed for this device, but as far as I know it s not possible to use another energy saving that was not designed for this device.
  This software cancels the installation procedure.

• Satellite L500-13D-CD/DVD drive does not read CD

  Hello

  I have a Toshiba Satellite l500-137 laptop with vista sp2.
  There is a cd writes that my dvd drive would not read, the driver can read other CDs & DVDs well.
  who says cd's seems to be fine as it can become red from the other computer.

  any suggestions?

  * Thanks to *.

  Hello

  That means only one disc can be read from your laptop and all other disks can be read properly? Well, in my opinion, it could be a disc problem, maybe it's striped s and so it can t be read to all readers.

  In your case, I would try to clean the lens of your CD/DVD drive. Therefore, you can use a microfibre cloth.
  Check it!

• Satellite A40-231: SD-R6112 will not read the DVDs I burned

  I finally got my DVD burner to work, but now the drive will not read the DVDs I burned, which, of course, defies the point of having a dvd burner in the first place... When I insert my dvd recently burned, "working" light lights and stays on. Same thing happens no matter how many times I take it out and put plug back in, restart my computer, etc... any ideas anyone?

  Hello

  @Magnus:
  Sometimes, CDs and burned DVD cannot be read with no closing sessions of engraving. You should check this option.
  In addition, this burning program did you use?
  I use Nero. Form is the program better combustion and I never had a problem.
  What you need to do is to test several DVDs. not all media work on the disc.

• This program can not find the Web page

  I have Windows XP.  Every time you start-up the computer and after the restart, the screen "this program can not find the Web page" appears.  I have to close it manually to display the desktop before entering for example or Google chrome.  How to get rid of the error screen?

  I have Windows XP.  Every time you start-up the computer and after the restart, the screen "this program can not find the Web page" appears.  I have to close it manually to display the desktop before entering for example or Google chrome.  How to get rid of the error screen?

  try to use "Autoruns for Windows" and check if there is a boot entry that is associated with your problem. If you do not disable an item at a time and restart the pc and isolate it.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

• Windows XP - LG DVD - RAM drive does not read the DVD. It's playback CD only... I ran the fix microsoft program... but it did not help at all.

  Windows XP - LG DVD - RAM drive does not read the DVD. It's playback CD only... I ran the fix microsoft program... but it did not help at all.

  CD/DVD players use different lasers to read CD DVD vs.  Eventually, your DVD laser has grilled.  It might be time to replace your CD/DVD drive.

  HTH,

  JW

• Try to change file type Association, but program is not on the list.

  I have removed an older version of a program and want the types of files previously associated with him to move to the new version of the program. But the new version of the program is not on the list of programs available for binding.

  Right click on a file you want to open with the new version of the program.  Click Open with > Choose program , locate the program, put a check mark in the always use the selected... program box and click OK .

• When you try to import a .mp4 file in windows movie maker, the program does not list the file when I search for it in his file.

  When you try to import a .mp4 file in windows movie maker, the program does not list the file when I search for it in his file.  Help, please.

  As I suggested previously, conversion to a format like
  . WMV before you import it into Movie maker may be the solution.

  The free Converter from Microsoft can be a place to start:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Download Microsoft Expression Encoder 4 with Service Pack 1 (SP1) (freeware)
  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=24601
  (runs under WinXP SP3 / Vista / 7)

  When you install the program...
  Start Microsoft Expression Encoder 4
  (Start / programs / Microsoft Expression /)
  Microsoft Expression Encoder 4)

  On the "Load a new project" screen...
  Left click... "Transcoding project '...

  When the program opens, click on... File / import...

  (If at any time you get lost while browsing
  the program of... to... Window / active Reset
  Type or workspace... CTRL + SHIFT + R)

  Look for the file/s that you want to convert.
  (If files do not appear... open the fall
  window and choose... All files)

  Click (highlight) left the files and the left on the Open button.

  You can see the files in the "Multimedia content" pane

  In the right column... left click on the tab "Output"...

  Open the drop directory window and choose an output folder.
  (This is where you will find your converted file)

  On the left, click on the button "encode".

  Wait... video encoding CPU intensive and can
  be a slow process. It is always best if you do not have
  multi-task while files are encoded.

  Now... try import you again. File WMV in Movie Maker.

  More converters:

  There are to many converters available on the net...
  the following links are some examples. You can
  need to experiment to find the best result.

  Proceed at your own risk *.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  (1) format Factory (freeware)
  http://www.videohelp.com/tools/Format_Factory
  (the 'direct link' is faster)
  (the file you want to download is: > FFSetup270.zip<>
  (FWIW... installation..., you can uncheck
  'all' boxes on the last screen... even in this case, it may
  install the Ask toolbar on your system)
  (Windows XP / Vista / 7)

  First, you will need to decompress the file or just open the
  Drag FFSetup270.exe out of the folder
  and drop it on your desktop. To install left click.

  (2) Freemake Free Video Converter (freeware)
  http://www.Freemake.com/free_video_converter/
  (Windows XP / Vista / 7)

  (3) Koyotesoft Free Video Converter
  http://www.koyotesoft.com/indexEn.html
  (2000/XP/2003/Vista/Seven)

  (4) Sothink Free Video Converter
  http://www.Sothinkmedia.com/video-converter/
  (Windows XP / Vista / 7)

  (5) hamster Free Video Converter
  http://www.PCWorld.com/downloads/file/FID, order 155794, 4 pages, 1/download.html
  (Windows XP, Vista, 7)
  (If you choose Custom Installation
  You can uncheck additional modules you
  do not want to install)

  (6) quick Media Converter
  http://www.Cocoonsoftware.com/
  (Win XP, Vista, Win 7 Home Premium)

  (7) SUPER © Simplified Universal Player Encoder & Renderer
  http://www.videohelp.com/tools/Super
  (the download mirror site is faster) (Windows XP / Vista / 7)

  (8) Xilisoft Video Converter
  http://www.Xilisoft.com/video-converter.html
  (not freeware but receives good reviews)
  (Windows XP (SP2 or later) / Vista / 7)

  Good luck...

• LifeCam HD-5000 works fine in other programs, but not in the Lifecam software accompanying

  My Lifecam HD-5000 works fine in other programs, but not in the Lifecam software that comes with it, I get "There is no camera connected to this computer." I tried to restart and uninstall then reinstall the software.

  Hello

  LifeCam HD-5000 - Support and warranty (3 years)
  http://www.Microsoft.com/hardware/en-us/p/LifeCam-HD-5000/7ND-00001#support

  Microsoft Hardware warranties
  http://www.Microsoft.com/hardware/warranties.mspx

  Support for WebCam
  http://www.Microsoft.com/hardware/digitalcommunication/support/default.mspx
  http://www.Microsoft.com/hardware/en-us/support

  Product Solution Center
  http://support.Microsoft.com/hardware

  MS material takes in charge and recourse in warranty (90 days support of)
  the date of the 1st call).

  1-800-936-5700 or 1-800 Microsoft (642-7676)

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• I've just updated my LR, but still can not read the new RAW files of my brand new Sony a6300. said 'impossible to read these files' is Adobe should update it program with new firmware to manage these new folders? Or something escapes me?

  I've just updated my LR, but still can not read the new RAW files of my brand new Sony a6300. said 'impossible to read these files' is Adobe should update it program with new firmware to manage these new folders? Or something escapes me?

  You updated Lightroom to version 6.5? This is the version you need. What is the exact wording of the message you receive?

• How can I convert .ai files in jpeg format?  It seems that I am only able to get the .ai files and my Adobe Photo Elements program does not recognize the file.

  How can I convert .ai files in jpeg format?  It seems that I am only able to get the .ai files and my Adobe Photo Elements program does not recognize the file.

  I want to continue my membership with Adobe, however, not if it requires some additional software purchase.

  For .ai files, you will need to use or know someone who uses Illustrator or another program compatible .ai to convert. If you access a page of image details before license you can see the file type.

• After installed LR6, I firstly the Programm. Its audit of my ID. But then the program does not accept the button: Seriennummer prufen with a new window: no internet connection. But the connection is OK.

  After installed LR6, I firstly the Programm. Its audit of my ID. But then the program does not accept the button: Seriennummer prufen with a new window: no internet connection. But the connection is OK. So I can't start the program.

  Hello Siegmud,

  Wende Dich wie oben und some showers a cat den, denn

  Problembehebung für die Aktivierung und Deaktivierung > Stellen Sie sicher, dass eine zum includes Internet connection > werden (auch) displaying Fehler, wenn Ihr Computer nicht mit dem Internet ist clear (breast kann, dass) oder wenn er nicht vom Aktivierungsserver erkannt wird. Wenn are sich um einen Fehler im accordingly mit dem Aktivierungsserver all, set Sie sich mit each in connection. Halten Sie your Seriennummer bzw. Adobe-ID bereit.

  Hans-Günter

• Creative cloud program, does not show the "App" tab until I have to do?

  Creative cloud program, does not show the "App" tab until I have to do?

  There is only 'HOME' 'ASSETS' 'COMMUNITY' label in the CC program

  Follow the procedure below:

  Uninstall Adobe Creative Cloud.

  Using creative cloud | Uninstall the creative cloud desktop application

  Temporarily disable the firewall.

  Step 1:

  Open the c: drive and navigate to C:\Program Files (x 86)------\Adobe " common files".

  Open the Adobe folder and delete folders named Adobe Application Manager and OOBE.

  Step 2:

  Navigate to C:\Program Files (x 86) \Adobe.

  Open Adobe file and if present the file to remove Adobe Creative Cloud . [* important]

  Can't delete? Rename it to Adobe Creative Cloud trees.

  Step 3:

  Press Windows button (located between Ctrl and Alt buttons) with the key R together at once, you will get a command window.

  Type below command and press the enter"" key.

  AppData

  Then navigate to Local > Adobe.

  Open the Adobe folder and delete folders named AAMUpdater and OOBE.

  Step 4:

  Make sure that Adobe Creative Cloud is not listed in the control panel > programs and features. list.

  Then, download and install the Adobe Creative Cloud app and check.

  https://ccmdls.adobe.com/AdobeProducts/KCCC/1/Win32/CreativeCloudSet-up.exe

• Reinstall Photoshop CS5.5 - on opening a file image, the program will not display the image.

  Just reinstall Photoshop CS5.5 of CD on Mac. On the opening of an image file, the program will not display the image. Thumbnails of the image appear in the layers window, but not the main window - ideas?

  Join the Discussion of Photoshop discussion