Satellite L10-119 freezes after RAM upgrade

Similar Questions

• Satellite M115-S3094 freezes after RAM upgrade

  Hello

  I just added Corsair - 2 x 2 GB 200 PIN SODIMM DDR2 667 mhz memory to my laptop Satellite M115-S3094.

  Earlier I had 512 MB included with the laptop. The problem is that sometimes the computer starts and freeezes, none of the buttons work and I have to hold the button for 10 seconds to turn off and restart the computer. Sometimes I restart 2-3 times until it works.

  If there is any problem after commissioning, then I find myself using the laptop for hours like now and I won't have any problem until I restart.
  This all started when I upgrded memory. I tried to re install and it did not help.

  I would appreciate any help from anyone who has faced such a problem. I also have windows xp home edition.

  On the casablenca system, it shows 4 GB but used is only 2 GB. I even deleted one of the sticks, but I still have the same problem.

  Hello

  I think that the problem is without a doubt for new modules of memory installed
  Maybe the modules aren't 100% compatible or failed modules

  I guess the laptop ran correctly with the old module of RAM.
  This would confirm my hypothesis and I think you should test the specifications with the other s RAM

  Good bye

• Satellite L10-119: update the BIOS clears and RTC battery is not

  I upgraded my Satellite L10-119 with new 250 GB HARD drive and the BIOS update. The laptop worked well.
  After two months a probem follow arrived - only first 137 Gb(2^48) of the disk is accessible.
  I've discovered:

  1. If I flash BIOS again and the computer restarted after flashing, the upper part of the HARD drive is accessible for a short time or until I restart again.
  2. a show of internal clock 01/01/1988 if I disconnect and connect a main battery.

  So I guess that it is a problem with the RTC battery (L10-119 is 2.5 years old)

  I tried to charge the battery of the CCF by connecting the laptop power for a long time, but this does not solve the problem.
  Does anyone know what can I do else (except visit ASP)?

  Post edited by: Admin

  Your guess was right, and I also, think that the problem with your BIOS settings always clear RTC battery.
  In other words, the RTC is dead.

  Battery charging will not succeed, because he can't keep the load.
  It's probably not as easy to replace then with desktop computers, so I advise you to contact local ASP, and all must be dismantled.

  I'm sorry to tell you, it's the only method I know to get your laptop to life.

• Satellite L10-119 - Win XP green bar is happening and happening again

  Hi all.

  I have a computer model toshiba satellite L10-119.

  It was working great until some time he began to delay a lot at the start.
  Specifically in the Win XP loading screen that this green bar is happening and happening again and again.

  I have if it can be a program or driver or even a virus that delays the start after some effort I decided to do a format and therefore a clean install of Win Xp (using the supplied by Toshiba with the notebook installation CD).

  Everything has been installed perfectly, and indeed this laptop has been commissioning within a normal period...

  When I turned on the laptop the next morning he started to again delay the start to the top! Once again to the Win Xp loading screen!

  When he finally connected to Windows I did immediately a reboot but this time it starts very well!

  Just to sum up things... computer laptop .the delays at startup ONLY if I leave it off for a long period of time (i.e. for a day or more). And as in the first start! If it starts the first time and session windows logs I can stop or restart for as many times as I like (consequtively) and it connects without any delay.
  However, if I let him off for a day or more and then turn it on, this model a lot to log windows! And we are talking about a 4-5 minute wait time! The waiting time is increased according to the time that the laptop has switched from...

  I tried to install winXP even using another CD but I still have the same problem.
  I though it was a battery problem, so I removed completely, but I still have the same problem...

  FYI the laptop is always in the power socket. And FYI when it connects to windows performance is also great. No delay at all. The only delay is starting...

  If anyone could help me or has an idea how to solve this really strange problem I'd appreciate much.

  Thank you.

  Hello

  I guess it's very old notebook and I think that the HARD drive was not replaced in the last time
  It s only I guess, but I think you should check if the HARD drive does not start to malfunction.
  I doubt that there could be something wrong with the battery because the battery would not affect the start-up procedure it has no influence on the performance of the OS.

  So it could be either something wrong with the part as a HARD drive, you know

  You can try to download the HDD drive fitness test.
  This tool is free and it will help you check the HARD disk for errors

• Is there an internal WLan antenna in Satellite L10-119 PSL10E

  I have a Toshiba Satellite L10 - 119 older (model No. PSL10E-00L01MED).
  I would add a mPCI-wireless card for which there is an empty slot.

  However, there don't seem to be available antenna wires.
  Is it possible these threads have slipped under the casing in which case I'll have to take the computer apart to find, or this computer did not come with built in antennas, although there amPCI slot?

  Thanks in advance.

  Hello

  > Is it possible these threads have slipped under the casing in which case I'll have to take the computer apart to find, or this computer did not come with built in antennas, although there amPCI slot?

  If there is a Wlan antenna you would see then two sons near the minPCI Wlan slot. Usually the two wires are black and white.
  If you didn t find these threads then there is no WLan antenna inside the laptop.

  Welcome them

• Satellite L10-119: OKI 8w Lite printer connection problem

  I have the Toshiba Satellite L10-119 series. I use it with 8W OKI printer. The printer works on USB port. Every day, when I print a ~ 10 pages of the judgment of the printer and XP driver display statement "connection problem". Currently, OKI prints all pages. Only restart helps XP on.

  The operating system is Windows XP and printer has an OKI dedicated for XP drivers. Other USB devices are working properly. I reinstall the Intel chipset drivers, I checked the printer on the other ports.

  Please send a sollution mail: michaljaniszek (at) walla (dot) com

  Hello

  You suggested that all other USB devices work properly on this unit.
  In this case, I guess that it s not a Satellite L10 problem but the OKI printer problem.
  Unfortunately, Toshiba is not responsible for the 3rd party hardware or software.

  However, I studied a bit on the net and found a few questions about the OKI printer problems. There are different issues and all have suggested contacting the OKI support. Well, in my opinion you should also ask the support. There may be more recent driver. Check it out.

  Good luck

• Satellite A50-109: after RAM upgrade-> blue screen

  Hi all

  I bought a new patriot 1 GB ram sodimm pc 2700 as an upgrade to my satellite a50-109. After installation of the equipment on the back of the laptop, I had some problems with windows xp bsod (blue screen of death). Errors 0x000000e8. After recording with microsoft, I had to reinstall the drivers... Can someone help me please!

  Thank you
  Alex

  It seems that you are using a module of memory without a name. These modules can malfunction. It s nothing unusual.
  So I use and always buy modules memory Kingston or Infineon brand, for example.
  I have goggled autour and actually ntfs.sys error might have something to do with the fault memory.
  It s whatever the module has been properly recognized in the BIOS. Certain areas of memory may malfunction

  In my opinion, you should check if the laptop will be functions correctly with the modules of memory recommended by Toshiba

• Satellite Pro C850-1HD: valid guarantee after RAM upgrade?

  I work with a laptop Toshiba Satellite Pro C850-1HD in the warranty period, and I would like to know whether to extend the warranty for laptop RAM is maintained.

  Thank you

  > I would like to know whether to extend the warranty for laptop RAM is maintained.
  RAM upgrade does NOT affect the warranty.

  Here you can find instruction and nice workaround how to replace Toshiba Satellite Pro C850 modules series
  [Satellite Pro C850 / L850 - Memory Module replacement procedure | http://aps2.toshiba-tro.de/kb0/CRU2603BZ0000R01.htm]

• Satellite L10: Mat * a DVD - RAM UJ - 831 S - update the driver or firmware

  Hello
  I bought a Toshiba Satellite L10-194 with a carpet * a DVD - RAM UJ-831 S and I'd like to update. My driver version is 5.1.2535.0 Microsoft (07/01/2001). I have a game I want to install it on my laptop but the CD doesn't recognize is not my DVD-RAM and its freezing point. I also want to know the rate of transfer of this DVD-RAM.
  Thank you

  Hello Daoude

  In my opinion, you have a bad driver. You can find the most recent version of the driver from the official website of Toshiba. The version of the driver for windows xp is 3.1.0.0 (last updated 02/03/05).

  Good bye

• Satellite L10: Memory needs to be upgraded to 1 GB

  I bought a laptop Toshiba Satellite L10 series a month back and needs to be upgraded to 1 GB of memory.
  Same month suppplier Jefferson did not do that.
  Who should I contact to get my machine set to level?

  Laptop was purchased from Lulu: hypermarket in Muscat

  Who should I contact to get this.

  Champagne K Chacko

  I put t know how much RAM use this device, but compatible modules are:
  PC2700 256 MB (PA3311U - 1 M 25)
  PC2700 512 MB (PA3312U - 1 M 51)

  Google a bit and I'm sure you can find the person who offers online in your country where you can order the memory module.

  Good bye

• Satellite P500-F12 - freezes after 5 minutes of game

  I recently bought a toshiba laptop P500-12F with the specifications below, the problem I have is that whenever I try to start a game like mount and blade or empire total war, the game works for between 5-10 minutes, but then crashes completely and the cell starts producing a strong buzz. The only way out of this is to press the power button until it stops. I don't get the problem with something else that this type of games and I don't know why it does this, any help or adivce would be welcome.

  Bradders.

  Operating system: Windows 7 Home Premium 64-bit (6.1, Build 7600) (7600.win7_rtm. 090713-1255)
  Language: English (regional setting: English)
  System manufacturer: TOSHIBA
  System model: SATELLITE P500
  BIOS: PhoenixBIOS 4.0 Release 6.1
  Processor: Intel (r) Core (TM) 2 Duo P8700 of CPU 2.53 GHz (2 CPUs), ~2.5GHz
  Memory: 4096 MB RAM
  Available OS memory: 4060 MB RAM
  Page file: 1641MB used, 6478 MB of available space
  Windows Dir: C:\Windows
  DirectX version: DirectX 11

  Card name: NVIDIA GeForce GT 230 M
  Manufacturer: NVIDIA
  Track type: GeForce GT 230 M
  DAC type: Integrated RAMDAC
  The device key: Enum\PCI\VEN_10DE & DEV_0A28 & SUBSYS_FF501179 & REV_A2
  Memory display: 2781 MB
  Dedicated memory: 1007 MB
  Shared memory: 1774 MB
  Current mode: 1680 x 945 (32 bit) (60 Hz)

  Post edited by: Bradders_1

  Hello

  The forum already contains these discussions where notebooks will freeze after 5 or 10 minutes of play. Have you read them?

  Now it s not easy to say what causes this problem but first of all you need to install the latest driver of Toshiba display. Don t use non-Toshiba drivers, as they can cause the overheating!

  Also make sure that you use the latest version of the BIOS and it s useful to clean the laptop time using a jet of compressed air.

• Satellite P100-219: overheating after memory upgrade

  Hello guys,.

  I've recently upgraded to 4 GB RAM in my laptop, and he did it again.
  Computer laptop stops immediately after awhile. CPU or GPU gets really hot. Works fan CPU, GPU was not used intensely. Simple web browsing/cat/emailing.

  What becomes hot however is part to the left of the memory/wlan compartment. Is it possible that a chipset gets hot after just upgrade memory?
  I tested the memory with Memtest + for more than 3 hours. No errors.

  Moreover, the last time that my phone was in ASP it had returned with DMI saying it's Satellite L20! I dunno if that could be related...

  Thanks in advance for your suggestions,
  mentorek

  You have blown the dust anyway? As you say, maybe another component is overheating rather than the CPU or GPU. The CPU/GPU heatsink can be shared with other chips.

  Have you installed RAM high performance? His best choose RAM that has the same Timings CASE/RAS as the original factory of RAM.

  The name DMI does not cause something like this.

  PS. If you're running Vista, you must pass the BIOS and driver nVidia on the Toshiba site

• Satellite P100-119 - software after the installation of recovery

  I use a Toshiba Satellite P100-119 since 2006. I want to run the original liveries Product Recovery CD after you back up all my data, so that with a vacuum system, the laptop gets even faster.

  But as there were pre-installed software (office, Toshiba programms) when I bought it, I don't know if they went after the recovery. I do not have CD for these programs, they were just pre-installed and what my Windows xp, should recover fully with the cd?

  Hey Buddy,

  After the installation of recovery, you have the same settings that bought the laptop. With other words recovery disk will restore the box settings.

  Firstly the recovery disk will wipe the entire HARD drive and remove all. After this Windows will be installed all the drivers and tools. In addition, will be also installed software preinstalled such as office, etc. and you can use it again. :)

  Backup all important data like the photo, music, etc. but everything will be removed for a clean install of Windows.

• Satellite P100 - 216 (PSPADE) - CPU / RAM upgrade options

  Hello guys,.

  I just got a laptop Satellite P100-216 (PSPADE-01400UEN). (card: T5500 - GeForce Go 7600 512 mb, 200GB)

  It has a Core 2 Duo T5500 inside and I intend to upgrade as well as the RAM to make a good laptop for my wife.

  The question if CPU is supported (assuming that the latest version of the BIOS). I am interested in the series with FSB800 or same T9000 T7000 series (1066fsb) shall if possible because I can get them pretty cheap - I know that the T5500 is just 667fsb by itself, so I wonder if the higher FSB is supported or I stay with 667 Mhz.

  Have searched through the net, but no information so far. Would not buy CPU only for it being not recognized by the laptop.

  Any advice would be much appreciated.

  Kind regards

  It is very nice for laptop and if you want to upgrade the RAM upgrade for your wife. In combination with the operating system pre-installed and optimized its own missus will be like to work on this machine.

  Upgrade of RAM is quite problematic and you can do it alone. what you need to do is get the compatible modules and high quality.
  I think now P100 has 2 GB of RAM, but you can upgrade to 4 GB.

  As compatible modules, you can use
  TOSHIBA
  PA3513U-1M2G (memory 2 GB DDR2-667 Kit) or

  Kingston
  KTT533D2 / 2G 2GB 533 MHz Module
  KTT667D2 / 2G 2GB 667 MHz Module

  On the CPU upgrade, I would just say that we forget. As a first step, it is not necessary to do so and secondaly - http://aps2.toshiba-tro.de/kb0/TSB9401AX0001R01.htm

  Bye and good luck.

• Satellite L10-119 does not work properly

  Hello, at the beginning I sorry for my bad English: P

  My laptop L10-119 are about 3 years old. I have no problem with it until now, I recall. Today, after 20 minutes of work I turn it off and everything was OK... until I want to turn it on again.
  When I press the laptop power button does not start. HDD led is lighting 0, 5-1 s and tun off the coast. I think that the hard drive is not working but I do not know, the screen is black, Cpu fan works, cdrom and Usb ports are powered. He is driven off. Power LIGHT is off even when the power is connected.

  I have not any ideas what I can do with this ;(
  Help, please
  Thank you

  null

  Hello

  It looks like a hardware problem. I mean if you didn t install anything or anyone pays (for example) some liquids on the machine, then the motherboard could be defective.

  The problem is that the machine is probably more under warranty and you will have to pay for a repair. But if you still want to keep the machine for a long time then click on the following link and contact an ASP (Authorized Service Partner) for a hardwarecheckup or a repair:

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT

  Sorry, mate, but I think that your machine is mounted to heaven. :(