Satellite L100 - connection problems with a wireless internet connection

Similar Questions

• Satellite A660 / 07P - problems with my browsers, internet connection

  Hey guys,.

  I just brought a Satellite A660 / 07P.
  I have problems with my browsers, internet connection.

  After a period of time (varies) my browsers stop to connect to internet.
  Skype works fine, as does my download manager and other internet services.

  When I run an internet system restore works again for a period of time, before picking up the handset.
  I used this happens with all browsers (IE, Firefox and Chrome).

  Any help is greatly appreciated.

  Ry ~.

  Hi dude

  Skype works fine. Right?

  This means that the laptop is connected properly to the router and the internet connection has been established successfully.
  I think that a firewall can affect the functionality of the browser. Check the firewall settings.

  In addition you should check if other installed 3rd party tools to affect the functionality of the browser.
  Verify installed tools

  last but not least you could clean the operating system. Use the CCleaner.
  Free is nice tools.

• I have problems with my wireless internet connection.

  It will connect and stay connected for a while but then at the same time, he will say it is plugged into the router but no internet and all I have to do to fix is to run the troubleshooter and it restarts the adapter wireless in my computer. but on the resolution of the problems then says that the default gateway is not found. How can I fix so it continue to happen? here is an idea of what it looks like after the resolution of problems is run

  Hi evanhoozier,

  ·         Did you do changes on the computer before the show?

  ·         You get the error message?

  Follow these methods.

  Method 1: Temporarily disable the security software .

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2: Follow these steps:

  Step 1: Start the computer in safe mode with network and check if the problem persists.

  Step 2: If the problem does not persist in safe mode with networking, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow step 7 the link to start the computer to a Normal startupmode.

  Method 3: Follow the steps in the article.

  Windows wireless and wired network connection problems

  Reference: why I can't connect to the Internet?

• I'm having a problem with my wireless connection. I have to keep in with zero wireless configuration to connect to the internet almost whenever I start the computer. I use downgrade XP on vista.

  I'm having a problem with my wireless connection. I have to keep in with zero wireless configuration to connect to the internet almost whenever I start the computer. Usually, you must configure only once and his game, but I have to keep on my new Dell Precision 6400 reconfigure it. I use downgrade XP on vista.

  Hi Susancav,

  Welcome to Microsoft Windows Forums!

  I'll be your message to the category of xp windows for a better answer. You can always find your message by going to my Threads in the section My Forum links at the top right of the page. http://www.Microsoft.com/windowsxp/expertzone/newsgroups.mspx

  Thank you and best regards,

  Bindu S - MICROSOFT SUPPORT
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Satellite L300 - unable to get a wireless Internet connection

  EY you have some questions,

  Funny, is that I have my laptop 4 on lets say half a year. I had problems with my wireless connection, I tried 2 fix it, but really never been stable.

  But now I had a problem I've ever had before, can't get no Internet connection what so ever with my wireless connection, only time when I get a connection is
  When I put in the cable.

  Checked a lot of posts but nothing really worked, tried the FN + F8 verified and updated http://aps2.toshiba-tro.de/wlan/.
  Tried to update my Realtek RTL8187B wireless 802. 11b / g 54Mbps USB 2.0 network adapter, but he can't find anything on the net.

  Let me know what you guys think I should do.

  was soon Dupp

  Hello

  Well, you said that the Internet connection is working that with the cable so you have checked the settings wireless LAN on the router? WLAN is enabled on the router?
  In addition, you should try to update the firmware on your router.

  Also, make sure that you use the same WLAN settings than on your router. I mean the channel and speed (e.g. 802.11 g).

  You should also try to disable encryption on the router. Can you connect to the router then?

  Finally and most importantly, you use factory settings or you have installed another OS?

• Hi there I have an acer aspire one and I have a problem with my wireless connection.

  Hi there I have an acer aspire one and I have problems with my wireless connection.it is connected, but I can't use internet.any thoughts? Thank you

  A look at the "front" face, under the lip of the keyboard, similar to where a lock would be on a laptop. There is here a cursor that is not a lock, but it is a switch that activates / deactivates him wireless on and outside. Slide it on until it turns on the light above it (with the logo of the antenna), indicating wireless is turned on and drag it again to turn it off.

• IM problems with my wireless connection, it says my DNS server does not respond, what is this, can help to somone, thanks

  IM problems with my wireless connection, it says my DNS server does not respond, what is this, can help to somone, thanks

  Hello

   

  Thanks for posting the question in the Microsoft Community!

  You can't use the wireless connection and the message that the DNS server is not responding.

  The problem may occur if the computer is unable to connect to the DNS server.

  To check, I suggest you follow the steps:

  Method 1: Re-register the DNS

   

  a. Click Start. Type cmd in the search box and press ENTER.

  b. at the command prompt, type the following command and press ENTER:
  ipconfig/flushdns (there is a space between ipconfig and /)

  It will display the message properly emptied the cache of DNS resolution.

  c. at the command prompt, type the following command and press ENTER:
  ipconfig/registerdns (there is a space between ipconfig and /)

  d. at the command prompt, type the following command and press ENTER:

  ipconfig/all (there is a space between ipconfig and /)
  The command ipconfig/all command displays for all your network adapters, TCP/IP in Windows settings.

  If your IP address of your Local network connection is 0.0.0.0 or 169.x.x.x (where x is a number any), then your computer does not receive an IP address from router.
  If this is the case, try this:

  i. enough at the command prompt ipconfig and press ENTER

  II. ipconfig / renew in command prompt and press ENTER

  The test again by typing ipconfig/all to see what is the address? (If you are on a router, it should start by or 192.168.0.x or 192.168.1.x 10.x.x.x)

  Method 2:

  a. click Start and then click Control Panel.

  b. go to the networking and sharing Center and then click on change adapter settings.

  c. right-click on connection to the Local network and select Properties.

  d. Select Internet Protocol Version 6, and then click Properties.

  e. choose the DNS server to obtain an address automatically , then press Ok.

  f. Select obtain IP address automatically.

  g. Repeat steps for Internet Protocol version 4 as well.

  http://social.answers.Microsoft.com/forums/en-us/w7network/thread/2e81fca4-35bb-4af9-86a1-7326d2fe91b3

   

  I hope this helps. If the problem persists, or if you have problems of Windows in the future, let us know and we would be happy to help you.

   

• Satellite Pro A100 - problems with wireless lan networks

  Hey all,.

  I have a problem with my laptop. It is able to connect to a wireless lan network, but is not able to properly - use this conection means: he do not get connection to Web sites or download data...
  I already have the latest drivers, but it's not helping...
  You have an idea? Could this be a problem with my wireless LAN card? What can I do?

  Thanks in advance

  DOM

  Have you tried a BIOS update?
  This you will find also on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com

  You have disabled all the security features for testing?
  I mean hidden SSID, MAC address filtering and so far. Maybe that's the problem.

  Check also if the router has the new firmware. You can find it on the site of the factory

• Windows 7. I recently had problems with loss of internet connection. When I have trouble Shooting, told me that impossible to find a driver.

  I have a desktop running Windows 7 PC.  I recently had problems with loss of internet connection.  When I have trouble Shooting, told me that impossible to find a driver.  The adapter does not appear in Device Manager.  Help!

  Hello

  Definitely looks like a problem with the network device. Check with sound
  Support, their books online, the drivers and ask in their forums (if any)
  on known problems. If there is a control of the device shipped with the system
  Manufacturer (manufacturer of motherboard for customized systems). If a device check separated
  with the support of its creator and other resources.

  You could also remove or disable the device and try a new add-on as one
  new card or device USD. None of those who are dear.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Error message: a problem with your wireless network card

  Hello, I get this message as shown below: any ideas how to solve this problem? A problem with your wireless network card

  Your wireless card has stopped working properly.

  There is a network adapter that allows your computer to connect to a wireless network.

  To find out if a version update of your wireless network card is available, contact the manufacturer of your device or computer.

  Go to the website of the manufacturer of your computer/laptop > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

  The computer you are using now if you have an Internet connection with the other > download / save drivers > copy them into Flash Drive > transfer / install on another computer/laptop.

  See you soon.

  Mick Murphy - Microsoft partner

• HP ENVY23: PROBLEM WITH A WIRELESS ADAPTER

  Hello

  I BOUGHT THIS REFURBISHED DESKTOP PC. ITS BEEN WORKING REALLY WELL FOR PAST 1 YEAR, BUT SUDDENLY, NOW HE BEGAN TO HAVE PROBLEMS WITH A WIRELESS ADAPTER THAT IS RALINK ADAPTER. PROBLEM IS THAT ADAPTER WILL SUDDENLY STOP WORKING. SO I HAVE TO GO INTO THE DEVICES AND ADAPTER MANAGER DISABLE AND ENABLE FOR HER WORK ONCE AGAIN. SOMETIMES EVEN THAT DOESN'T WORK SO AFTER RESETTING THE ADAPTER, I HAVE TO TURN ON/OFF THE COMPUTER. I HAVE NO CLUE AS WHAT THAT CAUSES THIS PROBLEM. PLEASE IF ANYONE KNOWS HELP.

  Thank you

  AHMED

  P.S I JUST TRIED TO UPDATE MY WIRELESS ADAPTER DRIVER.IT ME SAID I HAVE ALREADY UPDATED DRIVER INSTALLED.

  Hi there @JUMRONI

  Welcome to the Forums of HP Support! It's a good place to find the help you need, so many other users, the HP experts and other members of the support staff.

  Please report the number of complete product for your computer. Check out the following, if you need assistance with this information. How can I find my model number or product number?

  I suggest to start by checking your system for malware, as follows:

  HP computers - solve and protection against viruses on your computer (Windows 8)
  Spyware, Adware and browser hijacking software

  If that fix it, you're done, otherwise, you should check these:

  Troubleshooting wireless network and Internet (Windows 8)
  In addition, you can watch the the power management of your wireless adapter:
  Turn off the power to the adapter:
  1. open Device Manager. (Win Key + R > type devmgmt.msc > OK)
  2. expand the network adapters.
  3. right click on the Ethernet adapter / wireless, and then click Properties.
  4. click on the power management tab.
  5 remove the check mark next to allow the computer to turn off this device to save power.
  6. click on OK.
  7 test cycle.

  Forget the network: (Windows 8)
  1. press Windows Key + C
  2. click on settings.
  3. click on change PC settings.
  4. click on network on the left.
  5. click on manage known networks.
  6. click on the name of the network.
  7. click on forget.

  Reset TCP/IP on your PC:
  1. go to your start screen/menu and type CMD.
  2. right-click on the command prompt icon and select run as administrator.
  3. in the window that opens type "netsh int ip reset resetlog.txt" without the quotes and press ENTER.
  4 restart your PC and test.

  It can also help to reset the winsock catalog:
  1. go to your start screen/menu and type CMD.
  2. right-click on the command prompt icon and select run as administrator.
  3. in the window that opens type "netsh winsock reset" without the quotes, and then press ENTER.
  4 restart your PC and test.

  Reinstall the NIC drivers:
  1. download the drivers from here, but do not run them again.
  2. go to your Start menu/screen and type Device Manager.
  3. expand network adapters.
  4. right click on the wireless adapter and choose uninstall.
  5 install the drivers downloaded in step 1.
  6. restart your PC and test.

  Test an ethernet connection:
  Explicit. Test if the problem persists on a wired connection to the adapter hardware troubleshooting wireless can be directed to the appropriate areas.

  I would like to know if this works for you.

• 4320 proBook s - problems with the wireless Assistant

  Hello

  I have my ProBook s 4320 for about half a year now. For most of the year the half I had problems with the wireless assistant - it seems that when I start my laptop it takes about 5 to 10 minutes before the work of the internet. I never changed any settings in the wireless assistant.

  Nobody does face these same questions and no one knows how the internet starts immediately when I start my laptop? I tried this on different places with different wireless modems, but everywhere, it's the same thing and books of other people can use internet immediately.

  Thanks in advance

  Hello

  You are welcome to help

  The fact that it connects properly in Mode safe indicates that the driver who normally starts with Windows or a program is causing the problem - most likely candidate is to begin by F-Secure.

  Before attempting the following procedure, make sure that you have an installation of F-Secure program, so you can re - install this software, and also a license key necessary to activate it.

  Then, from the windows control panel. Open programs and features, click on the entry for F-Secure once to highlight, and then click the option to uninstall at the top of the window.  Once done, restart the laptop.

  Again, when windows restarts, check the internet connection by using only a known secure site.

  Let me know how this affects the problem.

  Kind regards

  DP - K

• I have a problem with the wireless network card.

  Hello

  I use a laptop Medion MIM 2210 and I have a problem with my wireless network adapter.

  I get a message before Windows 7 starts telling me that there is problem with a wireless driver. The exact message says:

  "Intel UNDI, PXE - Z.0 (build 082)

  Copyright (C) 1997,1998,1999 Intel Corporation

  VIA Rhine II Fast Ethernet Adapter v2.43 (2005/12/15)

  PXE - E61: Media test failure, check cable of

  "PXE - MOF: exit Inel PXE ROM.

  This message appears every time you start and I don't know what he means by "Media Test Failure".

  I turned on my laptop today and noticed I had no internet connection, it showed that it connected but with yellow '!' symbol indicating that it was not fully connected. He did this for a while now and I have reinstalled Windows, in safe mode and I tried to delete the drivers and re - install, but it hangs right on uninstall what makes me angry no the case.

  Of course now, I tried to look for help my internet connection is running but the message is still there. Can someone tell me what to do or how to solve this problem, I am standing now on what to do. I was also on the drivers Medion website but it is impossible to navigate around and drivers without end there'e to choose. I would consider ringing them and asking them if they were not located in Germany as it would cost me a bomb! I did just now searching online via the Device Manager to see if he can find an update for the drivers but nothing came.

  Thanks for any help that anyone can offer :)

  The message is to be cause the BIOS looking for boot from LAN (not wireless) before it starts and then from the hard drive. The Media test failure is because to boot from LAN it tests to see if the wired Ethernet is connected, it is not if it generates the error message.

  Enter the BIOS press F2 after initial power on but before the Logo Windows shows

  Integrated devices should allow you to set the settings of wired network adapter. According to the BIOS it is either "enabled with PXE" or have another option to enable or disable the boot ROM

  In the boot options the LAN card should be removed altogether.

  This message is ONLY applicable to the transfer of the BIOS boot process and should have no impact on the problems of WiFi (it is not on WiFi)

• Problem with the wireless on the system tray icon.

  Original title: wireless

  not found wirreless icon in the taskbar

  Hi Amourhbone,

  Thanks for posting your question in the Microsoft Community forum.

  It seems that you have a problem with the icon on the system tray wireless.

  I imagine the inconvenience that you are experiencing. We are here to help and guide you in the right direction.
  Provide us with a few details in order to better understand the issue.

  1. which version of the operating system are you using?

  2. deal with any problem with the wireless network using Internet?

  3. do you receive any error messages?

  4. did you of recent changes on the computer before this problem?

  I suggest you try the procedure described in the article and see if it helps.

  System icons do not appear in the notification area in Windows Vista or Windows 7, you must restart the computer
  http://support.Microsoft.com/kb/945011

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  Get back to us and let us know the State of the question, I'll be happy to help you. We, at tender Microsoft to excellence.

• Problems with N5050 wireless

  Hi I've had problems with a wireless N5050 for six months now. He was inconsistent and little by little do worse even if the signal always displays also available. I have a N5030 who has never had any problem to connect to the same wireless network. I tried to reinstall the drivers. I tried to change the configuration wireless between WEP / WPA etc... I've updated the BIOS. This seemed to have worked briefly, but after about 3 or four connections immediate restarts more than 2/3, he returned to be flaky. Usually when I try to connect it fails and I need to connect a cable directly from the router for access. If I leave it on it will usually manage to connect to some point in the next hour or two. The windows messages/troubleshooting help make no difference and seem to contain no useful leads. Another curiosity is that usually when he can't connect only lists my wireless network and one or two others, but when he is able to connect it lists more neighbors etc... I also tried some changes configuration after completing the other threads, but without improvement. Firewall and AV is McAfee, but it's no good to an immediate connection is restarted in Mode safe mode with networking that seems that reading absolves McAfee to be the problem? The laptop out of the warranty period, is it likely to be a problem with the wireless card or is there other configuration changes, I can try? Thanks Ben

  Ben,

  You have changed security WPA, correct?

  You wireless router Belkin router?

  I had you get your product key of McAfee using Belarc Advisor

  Then remove McAfee using the McAfee removal tool , and then restart your computer and try to connect.

  Rick