Satellite L100 - need SATA drivers to install Win XP

Similar Questions

• Satellite P100-400: need SATA drivers to install Win XP

  Good evening

  I would like to know if it is possible to give me a link with the SATA drivers for the laptop that I specified on the subject of the topic.

  I ask this because I would like to change Windows XP MCE, Windows XP Professional SP2 and for that I want to format the hard drive and install the operating system.

  BTW, a few days before, I checked the temperature of the processor in my laptop, and when it's 90% it loads reached temperatures as 90-100 ° c!
  It this normal, so high temperature? I checked with CoreTemp, I heard it is a good software to use with Core2Duo processors...

  I'll wait for the news
  Thank you.
  Best regards.

  Hello

  As far as I know that you need not all SATA drivers. Put the CD in your laptop and start the installation of the OS. With the help of facilities CD you can format the whole HARD drive and create clean partitions. After completing download and install the drivers, tools and utilities Toshiba support page. All that s!

  On the temperature of the CPU, I can't tell you much, but if the laptop works well you should not be worried about it. Just make sure that the laptop is placed correctly on the desktop and aeration is free.

• Need SATA drivers to install Windows XP Home on my Tecra A8

  I want to downgrade my A8 - 103 to Win XP, but probably will need SATA drivers (and floppy) when installing (F6), but can't find where to download the SATA/RAID drivers for my model?

  Hello

  To my knowledge that the Tecra A8 does not support RAID.
  It supports the interface ATA (SATA) series.
  But these drivers do not exist on the page of Toshiba. The operating system should include the Sata drivers or you'll get it on the Intel page.

  The XP must support all service packs. If your XP includes all the patches and SP, you can create a bootable CD of windows with an application called nLite. Check it!

• Satellite L350D 213 PSLE4E - how to include the SATA drivers to install Win XP

  Hello my laptop came with win 7 installed
  I would like to have xp instead, but may not work on sata drivers I need to do this.
  If anyone can help
  Satellite L350D 213 PSLE4E
  see you soon
  Doug

  Hello

  You have two options;
  Either you install Win XP with SATA drivers or without the SATA drivers.

  If you want to install Win XP without SATA drivers, you will need to draw the SATA AHCI compatible mode option in the BIOS. But in this case the HARD disk, performance would be lower.

  If you want to use the SATA performance, then you need the SATA driver.
  For this I recommend this HowTo:
  + How to integrate a SATA AHCI driver into a Windows XP Setup CD.
  http://APS2.toshiba-tro.de/KB0/TSB85017Z0000R01.htm

• Satellite L350 - 16L: could not find the SATA drivers to install Win XP Pro?

  I want to install XP Pro.
  Can not find a driver for a SATA drive. nLite will incorporate into xp driver SATA and install XP and then install any driver and the program.
  You will connect to the SATA driver, please

  I don't know who is right.

  Thank you

  Post edited by: splicanin

  Check this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=39465

  Jimi posted a link to the worm: 8.6.0.1007 Intel Matrix Storage Manager, which includes the necessary SATA drivers!

  Good bye

• Need SATA drivers for installation of WXP on Satellite L40 - 18Z

  Hello

  I bought my laptop in a local computer store and I was not given any CD or anything. I recently had to replace the HARD drive due to issues listening "classics." In any case trying to reinstall my personal copy of Windows Vista I had to include the SATA drivers to install.

  I downloaded those required for Windows XP, and it worked well before that, incidentally, but now when I try he doesn't know... I even tried to install Windows Seven, but this has always had the same problems. For the moment, I'm just under Ubuntu, but I really need windows for my work.

  SATA what drivers do I need to install Windows Vista? - And before someone says; the BIOS does not allow IDE emulation, or a other SATA mode.

  Thanks I would really appreciate any given notice...

  Hello!

  I m a bit confused now because you talked about Windows XP, Vista and Windows 7...
  What you want to install now?

  Drivers you want, you can find the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  You need the Intel Storage Manager and it s is available for Windows XP, Vista 32 bit and Vista 64-bit.

  Good bye

• Satellite L300 PSLB8E - I need SATA drivers

  Hi guys,.

  I've seen this question asked before and yes I've read through the forums and looked at the other answers and Yes; I saw responses like use nLite and Intels visit page but I need to ask the question if Toshiba provided all the drivers for this model L300-1AQ PSLB8E-OOKOO.

  I haven't provided the sata drivers to add on a diskette to allow you to install the SATA drivers and do not disable the SATA option in bios.

  If the drivers are provided by Toshiba to in nlite you can use as well on the floppy drive if you have a (I). I searched this site and Intels drivers for the Sata controller ich9m-b with no joy at all.

  If anyone knows of their whereabouts, I would greatly appreciate your help.

  Many people thank you

  Hello

  You need SATA drivers?

  Well, this forum is big data base and you will find many discussions about the same theme.

  If your laptop is equipped with Intel chipset, then you need the drivers SATA/files that are part of the Intel Matrix Storage Manager.

  This IMSM can be downloaded from the Intel page if you use nLite software, you have the package of disks IMSM because this package contains DLLs and inf file and not the exe file. The SATA files dll and inf could be included on the XP disc very easily.

  Welcome them

• G62 225 NR. I need remove Win7 and install Win XP. How?

  My daughter has worked in America and he bought a laptop HP G62 225 NR. Then she returned to Russia and he brought with him. Now, I need to change the OS with Win 7 on Win XP because my program does not run in Windows 7. I can't install Win XP even if I install a new HARD drive. How to remove information from BIOS on previously installed Win 7? Unfortunately this model HP in Russia is not supported.

  Hello:

  You will need to integrate the ahci sata drivers to install Windows XP on your model.

  Please read the guide below, section of Intel and then read the downloadable PDF to find out how to integrate all the sata drivers.

  http://h30434.www3.HP.com/T5/notebook-operating-systems-and-software/SATA-drivers-for-XP-solution-on-0x0000007B-BSOD/m-p/114120/highlight/true#M17758

• Need sata drivers for Pegatron M2N78 - LA for Win7

  I need sata drivers to an installation of windows on a HP Pavlion Elite m9350f with a mobo Pegatron M2N78 - LA, does anyone know if Win 7 drivers are available for this?

  Windows 7 should not require drivers SATA install mother M2N78-(purple) on the map. I installed Windows 7 and Windows 7 SP1 several computers with the M2N78-(purple) and motherboards M2N78-(Violet6) without the need for any additional drivers. If you have any questions, please describe in detail the problems and/or messages that you receive.

  Please send Bravo

• blue screens win7 for XP sp2 p6624y decommissioning prior to loading. need sata drivers? Help

  Hi I'm downgrading my p6624y of Windows 7 for XP sp2.  When completed the installation of the drivers of blue screens.  I think I need SATA drivers for this system.  If you have links for other drivers please let me know.  Need to get there soon.  Many need help...

  Try to set the hard disk controller in the bios in IDE mode.

• Satellite L40 - 17U - need SATA drivers for installation of WXP

  Someone here these drivers? I looked like 5 hours already trying to install win XP.

  Hello

  Download matrix storage manager. I think that the SATA drivers must be there. Test it please.

  

• Satellite A60-s302: 0x0000007B BSOD while installing Win XP

  Hi all

  I have an old Satillite A60 and would like to reinstall Windows XP without the Toshiba recovery cd.

  When I boot from cd I get the configuration screen (text - back like) windows and it starts to load all the files.
  But when the message "windows start Setup" appears I get a blue screen with an error "0x0000007B".

  I have to load 'RAID or SATA drivers custom' installation with the F6 key?
  If so should what drivers I use?
  Or is there another solution to this problem?

  Thanks for the help
  Peter

  Hello

  As far as I know you don t need RAID drivers and don t need all the SATA drivers.
  What version of Win XP do you use? SP2 is included?

  If this isn't the case, please include to CD Win XP SP2 using nLite.

  By the way; I would recommend setting the default BIOS (press F9 BIOS and save the changes)

• Satellite U400 - 14 p PSU44E: cannot install Win XP - black screen

  Hello

  I bought a Toshiba U400 - 14 p (i-e-U400-PSU44E) a few weeks and I can not install XP on it.

  I boot with a cd XP (tweak with nlite where I added my AHCI drivers and SP3). But at startup time, the system tells me that will attempt to recognize my hardware and then I have a screen_ _dark
  I don't have the blue screen where I can press F6 to install the SATA driver.

  So that's what I tried to solve my problem:

  -Flash bios => same thing
  -Boot with an external cd usb => same thing
  -Made a lot of tweak XP cd with SP2, SP3 wathever => same thing
  -Sacrifice a chicken and asking the old spirit of help-online the same thing: D :D

  _Some tell me I'm a tattooed bios_ how can I get around this?

  I try to boot with a usb floppy again. Because I have no one and it is so vast!

  Guess that's it's the same thing. It will be hard to swallow :(

  Thank you for your help.

  Hello

  > I boot with a cd XP (tweak with nlite where I added SP3 and my AHCI drivers
  Can I ask you what you used SATA drivers?

  I have a U400 to and Win XP has been installed without any problem of bug.
  The Intel Matrix Storage Manager contains all the necessary SATA files which should be integrated into the XP CD.

• Satellite U300 - 11y - no sound after installing win XP, SP3 rc1

  Finally got my U300 working with XP, but I can not get the operation. The proper drivers are installed, but nothing. Hardware working on Vista, so this seems like a driver problem. I think realtek for somereason Setup is not totally complete the configuration.

  I followed the advice on
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=99567 but no luck.

  Becomes pretty nervous now, I need sound for Skype in my company.

  Thanks guys,.
  Tim

  Post edited by: ADMIN

  I have seen working on Satellite U300 WXP and well I used Skype. The sound quality wasn't the best but it works.

  Somewhere on this forum I found info on Microsoft KB888111 and KB835221 patches. This should help not working sound on Windows XP Home edition. Please check it out.

• need sata drivers to format text for the installation of windows

  hey im trying to reinstall windows on my dell xps 700 desktop computer but I need drivers sata for the instalation disc (I do not have the supliet a dell me with) and I'm using nlite for this but I can't find the drivers for it I need the driver to be in textmode as nlite called someone can please help me with a download link for the drivers

  I have now completed the installation and it worked smoothly so now I just need to some drivers can any of you guide me? I don't have an Office exept empty the trash so I need some internet for beginners

  http://www.Dell.com/support/drivers/us/en/19

  For best results, put in your Service tag.  Otherwise, "choose from a list of all products Dell" > Desktops > XPS > XPS 700 Jet Black

  Read this first http://support.dell.com/support/topics/global.aspx/support/kcs/document?c=us&cs=19&l=en&s=dhs&docid=DSN_1A0C0937D62A8739E0401E0A55174744&isLegacy=true

  If there is a choice of different drivers (for example, the categories of video and audio), you should do one or more of the following to determine that you actually have material:

  1. use your serial number instead of looking for your computer in the list of all Dell products.
  2. glance in the Device Manager (start > run > devmgmt.msc > OK)
  3. look in system information (start > run > msinfo32.exe > OK)
  4. open your computer and determine the make and model of the control card