Satellite L20 182 build antenna on the screen?

Similar Questions

• Satellite L20-182: after installing the OS only USB 1.1 not 2.0

  Hello, I am an owner of the model Toshiba Satellite L20-182.
  Recently I did a format disk and installed Windows XP Professional with Service Pack 2.

  Unfortunately, the system detects USB as a version 1.1.
  I find anywhere USB 2.0 drivers.

  Could you help me?

  Hello

  Why suggest that you have only the USB 1.1 and USB 2.0?

  To my knowledge you will not find any special USB Toshiba drivers Toshiba page.
  Each unit of Toshiba uses the current Microsoft Windows USB drivers and it s not necessary to install the special USB drivers.

  I assume that you have installed the operating system from the original CD of Microsoft and not the Toshiba back CD. Am I wrong?
  In this case you must install all Toshiba drivers that are available in the right order. The chipset utility is very important! Generally, the chipset must be installed at the first stage.

  Please also check this Microsoft documents:

  Availability of the updated Windows XP SP1 USB 1.1 and 2.0
  http://support.Microsoft.com/?kbid=822603

  When you install Windows XP Service Pack 2, the USB 2.0 drivers do not appear to be updated
  http://support.Microsoft.com/kb/873169

• Minipci WiFi on my Satellite L20 182?

  Hello!
  I have Satellite L20 182 without wifi card, but I want to install a. I started minipci location but I put t know if I antenna pre-installed. When I ve looked under the guise of minipci slot. I found 2 wires (red and black), but they seem to be connected to something. Are they son form antenna?
  If Yes, could someone explain to me how to install the card and what type of wifi card to buy, please?

  No, it is not possible to update and use a minPCI wireless network card in this s notebook.
  If you want to use WiFi technology and WiFi, then you must switch to an external solution such as a USB WiFi key.

  There you can choose between different modes of WLan such as 802. 11A, B, G

• Question about new BIOS on Satellite L20 182

  HI :)

  I have a question: can I install new BIOS 2.20 on my Satellite L20 182 model No. PSL2XE?
  If I can't, why PSL2X users do this? Are there differences in the two models?

  Hello and sorry for my English - I'n not the best :)

  Hello

  just for explanation: the bios you mentioned is good the machine bios. Toshiba is not writing the complete model number since there is a range of numbers of the same model, Don t so you need not worry, they are not different. Maybe the last digit, but it is not important to you.
  Why am I knowing this? Because many manufacturers are doing this and I've been several times confused when updating the BIOS from another manufacturer...

  Welcome them

• Satellite L20-182: is it possible to upgrade processor?

  Hello. I have a Toshiba Satellite L20 - 182 and I want to change the CPU.
  My CPU is the Celeron M 380 (1.6 Ghz), and I want to install Pentium M.
  Can I do it?
  If I can, can what Pentium M I install on my motherboard?
  Please answer me.

  Sebastian K., from the Poland

  Hello

  Well, in general it of not possible to upgrade the processor.
  Some processors are fixed mounted on the motherboard.
  In addition, the processors used in laptops are connected to the motherboard using a process called TCP (tape carrier package). It is a permanent connection method and is used in the interest of miniaturization and heat dissipation

  Just for info:
  I found some Satellite L20 units which are supplied with different processors.
  For example:
  Satellite L20-204 Intel-Pentium-M (Dothan) 750 1.86GHz
  Satellite L20-214 Intel-Pentium-M (Dothan) 740 1.73GHz
  Satellite L20-300 Intel-Celeron-M (Dothan) 370 1.5GHz

  Best regards

• Satellite L20-182: fan is not working properly - intervals of one minute

  When I turn on the computer about 20 minutes is quiet. The fan starts like a hurricane, slows down and stops. It lasts a few seconds. The fan works this way on a regular basis with intervals of one minute.
  Is it possible to turn the fan on a continuous work in slow motion?

  Hi Dominika

  I put t believe that your laptop can be so dusty in a few months and believe me there everything is ok. I know that cooling fan noise is sometimes annoying, but unfortunately there is not much to do.

  I'll be honest to you. Satellite L20 is low budget and the unit is configured very simply. For most Toshiba units, it has preinstalled Toshiba intelligence tool and it is possible to change the method of cooling. On your device, it is not possible.

• Replacing screen on Satellite L20 182

  My monitor satellite L20-128 is broken, so I need to replace it with a new one, I get the same. I mean with the same number (LQ150X1LHS2 / B 5XD24863), or there are other choices?

  Hello

  Generally, you should always buy the parts recommended by the manufacturer of the laptop!
  Then you could be 100% sure that the part (display) is right.

  To my knowledge, the laptop uses a 15.0 "1024 x 768 TFT screen.
  It is important that you buy the same size 15.
  The resolution is not very import.
  I m sure that the graphic card supports a higher resolution than 1024 x 768 and if you go to buy a screen that supports a higher resolution, you will be able to define the display on a higher resolution.

• Satellite Pro 2100 two cables behind the screen

  Hi, first post so be gentle with me please.

  I have a Satellite Pro Satellite Pro 2100 and the hinges are shot, so I bought a 2100 piece to Exchange.
  Everything was ok except that I have two sons that I can't find a place to plug in. A black white and they are attached to the small square gold Ribbons that are glued to each top corner at the back of the screen. The other ends have little, but when I stripped the laptop they were in bulk and I do not see where they are going.

  However, the laptop works fine without them.
  Can anyone help please?

  All laptops with WLAN have this. WLAN antenna is placed behind the screen and these two wires must be connected to the WLAN antenna.

  If your laptop doesn't have WLAN card put just the cables aside and everything will be OK.

• Satellite L20 - 101 - Sound driver causes blue screen

  1. my laptop is a Satellite L20-101. It worked fine until yesterday when I reinstalled the system (from recovery cd) after 3 years. I have updated the bios to version 1.70 (drawn from the toshiba site). Devices audio conexant could not be recognized, and if I run the installation of the latest audio drivers (sound-20080604145033), it fixes the problem, but when you restart the system and login as administrator I get a blue screen. Any help pls?

  2. given that the LAN card is working, there is a message for the installation of a driver for a network device!

  3. when the system starts up, I get an error 0 x 57 for toshiba power saver. Even when I reinstalled ver 7.03.02.I from toshiba Web site the problem remains.

  Thanks in advance
  Maxco

  Hi maxco,.

  About its pilot I n don't know why you're getting a blue screen with the latest version, but I advise to use the preinstalled version of Toshiba recovery disc. So try a point-to-point previous system restore.

  Driver LAN and Toshiba Power Saver, you can download from the official site. Relocation of these tools should work!

• No Satellite Pro 6100 no response from the screen

  Can anyone help?

  My 6100 Pro Satellite lit last night then automatically went into hibernation, despite being connected. Now when I turn it on there is no response from the screen, but if I plug a monitor to the laptop, the screen works (as long as I start in safe mode)

  Can anyone help?

  Hi Simon

  Disconnect all cables from the laptop and remove the battery.
  Wait a moment more (20 min) and reconnect the battery and the AC adapter.
  Then check if the laptop turns on and if the display works fine

  Good luck

• Satellite M70-339 vertical lines on the screen

  Hello...

  I have a Satellite M70-339, which will show only the vertical lines on the screen.
  I connected an external monitor and booted in safe mode.
  I uninstalled the display drivers.
  I started to monitor and reinstalled the display drivers.
  The computer will now boot up screen.

  I put the display to indicate to both monitor and screen.

  On the monitor, all right.
  On the screen, I get vertical lines color, similar to a wallpaper (wallpaper is not pretty).

  Did anyone has got any ideas what could be the problem, or how to diagnose the problem
  Any help would be appreciated.

  John C

  If everything is OK on the external monitor that is the best evidence that this problem is related to the internal LCD. Display must be exchanged.

• Satellite A300 - turn is not on, the screen remains black

  I have a laptop Satellite A300. I tried to turn it on when I got home from work and the screen remains blank. The bottom (plug, power and battery lights) turns on but the screen remains black.

  Can someone help me?

  Hello

  It of hard to say what's going wrong here, but maybe it s just a small issue that could be solved easily.
  Try this;
  Remove the battery, disconnect the adapter.
  A few hours and reconnect the two parts.
  I had this problem in the past and leave the laptop disconnected during the night.
  The next day, I connected battery and adapter A\c and the laptop worked again

  Maybe this will help you too

• Satellite A300 - system still works, but the screen is blank

  Hello

  I was downloading an update of tempro toshiba (synco or something in that sense) for my laptop Satellite A300 and the frozen screen. I pressed the power button for 5-10 seconds until it is turned off. When I turned it the system seemed to work but the screen is completely black.

  I tried to remove the battery, and fn + F5 but the screen still won't turn on.

  Any help or advice would be appreciated.

  Rob.

  Hello

  It happened because of the updated BIOS, or during the common software update?
  In case it was an update of the BIOS I recommend contact the ASP in your country, because it seems that the ROM module must be flashed again.

  If it happened during a common software update, so I advise to remove the battery and the AC adapter and wait an hour.
  Then reconnect the two parts and check to see if you could power the laptop properly!

  Check it out!

• Re: Satellite A135-S2276 - does not start, the screen is blank

  I have a Toshiba Satellite A135-S2276, I bought 2 years ago. It worked fine except the clock which has never kept the exact time since I bought it. I turned it off Sunday night as I do regularly. But he could not turn it on Monday afternoon. The power light is not on when you turn it on, but primer. The light remains on but does nothing. The screen is blank when feeding it works.

  Can someone help me with the answer? Thank you

  Dennis

  It's hard to say what is happening to your knees. You can access Bios? Try to connect the external monitor and see (maybe the screen of the laptop disappeared)...

• Satellite C660/C660D - shift key causes the screen to go black

  After purchasing the Satellite C660/c660D less than a month ago.
  I am disappointed to see the SHIFT key (left), as well as the CTRL pressed, causing the screen to go black intermittently when you type my blog...

  Course not blogger like tested also in word.
  All the ideas that is weak given the reviews and prices...
  Help... dosnt do it every time, but most of the time. Not happy!

  It is a fault, I don't expect this brand

  Thanks for any help

  Hello

  > I am disappointed to see the SHIFT key (left) and the CTRL pressed, causing the screen to go black intermittently when you type my blog...

  What does this mean exactly? Press SHIFT and CTRL button turn off the display, and you are not able to see anything on the monitor?
  Is this good?

  Have you checked if this happens with the help of an external USB keyboard too?
  If this isn't the case, I guess that your keyboard is malfunctioning and needs to be replaced.

  One of my friends had a problem with my keyboard. The cursor jumped around and some characters are displayed two times this could be resolved by the BIOS update I m do not know if your laptop uses the latest version of the BIOS, but you can check this too.