Satellite L20-214: Does recover CD contains the Win XP Pro

Similar Questions

• Satellite L20-214 - isolate bad sectors on the HARD drive?

  Dear Sir

  My laptop fell off my table leading to serious hard drive problems. The hard drive now has some bad sectors that can be repaired with the chkdsk command. I managed to get my data on an external hard drive. Despite the bad sectors, I can reinstall it however from the recovery cd. Starting after that time consuming (1.5 hours) and after starting Windows I get the error messages from programs that cannot be started. It's the same thing after each reinstall. My guess is that the recovery disk writes data on the same spot every time both on bad sectors.

  I was wondering if theres a way to fix or even isolate bad sectors on the disk, so I can continue to use my laptop.

  Your help is very appreciated.

  Hello

  You can try HDD Regenerator 1.61 (HDD Regenerator is a unique program for regeneration of physically damaged hard disk drives. It does not hide bad sectors, it really restores them).
  However, the best way is to buy a new hard drive :)

• Win7 need display driver for Satellite L20-214

  Hi all

  I have a toshiba satellite L20-214, 2 GB of ram.
  Just upgraded to Windows 7 ultimate service pack 1.
  I have a yellow exclamation mark on the video controller.

  I went to toshibas site to search for the drivers but my model is not mentioned, so I can't go any further. Please let me know what I can do to solve this isue.
  see you soon
  m

  Satellite L20 is an oldie and page European driver Toshiba does not provide drivers for Windows 7
  You must search for the driver on your own hand.
  Maybe you can get the driver on the graphics card manufacturer page.

  By the way; drivers for Win XP, you can find on the European driver Toshiba page but in the Archive. You need to choose in the first option of product Type: Archives

• HP ProBook 440 G2, fingerprint reader works not when I upgraded the Win 7 Pro form to win 8.1 Pro

  My HP ProBook 440 G2, finger print reader does not when I upgraded the Win 7 Pro form to win 8.1 Pro.

  Device manager showing the biometric reader works correctly. But in fact, the finger printer reader is not reading or senseing. It seems that the part "dummy". Please help me to correctly configure step by step for that matter.

  Thank you

  Hillet

  Have you installed the software driver validity sensor fingerprint for Windows 8.1?

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=6943811 & swItemId = ob_134806_1 & swEnvOid = 4158

  See page 64 in the manual Windows 8.1 according to the configuration of fingerprints of validity information

  http://h20565.www2.HP.com/hpsc/doc/public/display?sp4ts.Oid=6943810 & docid = emr_na-c04371762 & docLocale = en_US

• Satellite L20: Modem does not get dial tone

  Hello

  My L20 specifications is not a tone whem I'm composing upward. On another pc, the connection works well, so I don't know that the line has a dial tone and the other computer is "listening".

  I also tried to uncheck the option "wait before the tone", tried to remove it from the Manager of devices, but after this all the modem still does not work. The current driver that is installed is version 7.20.00.00, because I can not install the latest version (7.25.00.00) (installation program does not end well, no specific error is given).

  Someone knows what to do?

  Open the system control panel, and then choose the phone and modem options.
  He check on the Modems tab. The modem should be placed in the list.
  If this isn't the case, then you must install the modem driver.
  Check the Modem function by pressing the 'button interrogate Modem.
  If the information window about the Modem contains a list of COMMANDS (including ATI2, ATI3, ATI4 etc.), then the modem is installed correctly. The ATI5 command ends with the number for the parameters selected regional (for example Germany = 06).

  To change the regional setting please use the Toshiba Internal Modem region Select utility.

• Satellite L20 modem does not work in some cases

  Hello

  a friend bought a Satellite L20 last summer. In January, she started working on the Internet on an irregular basis, but has known trouble. So I looked after the laptop last week:

  When you try to connect to the Internet connect to the provider sometimes fails. If she finally gets the connection, it often occurs the message that the page could not be found, and only after clicking on the button "Refresh" the page several times finally appears. But oddly enough, every time I unplugged the power supply connection become noticeable better.

  (Win XP; pilot/diagnosis: no problem arose; provider works very well on different computers)

  Unfortunately, he had no chance to check the connection here with a different material. I can't say if the latest driver is installed, but think that Yes, because of the date of purchase. So, my guess is that the power cable is not adequately protected. But if so how? Or what else could be the reason for the unexpected behavior of the modem?

  Thanks for your suggestions!

  Hello

  I heard a similar problem with another model of Satellite. Solution was to install the Satellite A110 modem driver. Please don t ask me why, but test it.

  The modem driver, you can find HERE

  Good luck!

• Why the Satellite L650-116 does not appear on the list of products?

  Why my notebook l650-116 does not appear on the list of products?
  It does not appear even with the auto detects the program located on the site.

  Hello

  I put t know what you mean?
  SATELLITE L650-116 is a European model for Toshiba laptop. But this L650-116 has been published for example in Cyprus.
  You can find the details on the Toshiba Cyprus page
  http://Toshiba.com.cy/pages/en/toshiba_products/laptops/satellite.php?prod=197&cat=2

  In addition the L650-116 belongs to the PSK1JE series if you need drivers, you must choose L650 PSK1JE

  Welcome them

• Satellite L20 260 won't boot to the top, every time it freezes with no reason

  Hi all

  I have a problem with my satellite of sad, after 3-4 days I installed a new operating system (tried with XP SP2 and Kubuntu) system does not boot to the top, every time it freezes with no reason, the only way is to perferom a new installation of the OS. What is a hardware problem, perhaps related to the RAM or HARD drive?
  x 10, Daniele.

  Hello

  It's not easy to tell if the problem is software or hardware related.
  You must install the OS from the Toshiba Recovery CD and again test the functionality

  If the laptop won't boot again freezes immediately after that installation of recovery CD, and then it could be a hardware problem.
  You can try using MemTest 3.5 tool.
  It checks the memory of a malfunction.

• Satellite L750 - impossible to recover anything from the CED

  I have a Satellite L750. I called and received advice from TS.

  I had suspected a virus and I wanted to restart from my CD that I created when I initially set the lap top up (I'm told that they are something of the image). I've learned to save and explained how to do this (I'm not warned technology; I know how to use the laptop for what I need, and that's all).
  So I followed the procedure given by TS and made a back up it took quiet some time.

  I contacted TS say again and again I have the CD I did again and I would like to save.
  I followed the steps for me: hold the '0' key push down the on/off switch and wait - then follow the steps on the scree for 32 or 64 bit, and some hand it the WARNING came up... it happened and then it seems to restart.

  When I asked help how really anything restart after that that it was not the support of security - and now I am unable to fix anything of the ERC myself nor I am able to recover something in the file 'back up' I - I made two more distinct (just in case).

  I would like to know if I can recover/reinstall/import/use / copy the CD information
  I did like the thing of the image

  AND

  How can I restore/reinstall/import/use/copy my files from this file backup that always asks me to 'restore' when I chose never - and even after this more than 4 times I have no files?

  I'm not at all intuitive in this area; I really tried to look on the internet without success...

  advice advice or info would really appreciate at this point, I tried to solve this problem since 08:05 Queensland times today (Friday 16.12.2011)

  I would like to thank in advance for their help

  Hello

  Maybe it sounds silly now, but it is not easy to help with this. I think either it works or not.

  Very portable can be recovered on two tracks:
  -with the help of HARD drive recovery option (recovery image is saved on the HARD drive)
  -using the created the CD or the DVD

  If you use zero initially to the top, I guess you portable non-European. In any case try please to created once using more disks.
  -Start your laptop and press F12 to get into the boot menu
  -put the recovery disk 1 into the optical disc drive
  -in the start menu, choose the CD/DVD drive and press ENTER

  Optical disc drive will start to read the disc and you have to do is follow the menu on the screen.

  Please do and tell us exactly what is happening.

• Satellite L20-100: where can I find the drivers?

  Where can I find the drivers for Toshiba Satellite L20-100, model No. PSL20E-01101PG3. I lost the original installation CD.

  Hello

  Did you look on the page of the Toshiba driver?
  If this isn't the case, please do it!

  I checked this site and I found the necessary drivers.
  Please choose: computers portable satellite Satellite L Satellite L20

  Good bye

• Satellite L20-217 does not start

  Hello
  can anyone help?
  I have a Satellite L20-217 and it just stopped working on the other day.
  It was connected with the AC adapter, all of a sudden the message came on the screen saying my battery was low so less than a minute the whole machine has stopped working.
  I ve bought a new power supply and the s is still running is not on. I ve took out the battery for 2 minutes etc... and still nothing; West not sound and no lights.
  When the battery is in and the adapter is hollow area I still get nothing, but if I press the power button the left hand LED will blink for a few seconds then nothing again.
  I really need to get this working as I´am a tattooist and piercer hairdresser and there all my drawings etc. on it.

  Thx for any help

  You can start your laptop with AC power only (the battery is removed)? If so, start windows and after a few minutes, put the battery inside and post the result.

• Satellite L20-100 does bus support DDR2 800?

  Hello

  Does anyone know if Satellite L20 - 100 bus DDR2 800 support?
  Thank you

  Only some mobile most recent supported it but not your old Satellite L20.
  Upgrade buy compatible modules.

  Do you not know is you need it?

• Satellite L40 - 14N does not connect to the WLan router

  Bought two portable Satellite L40 - 14N as Christmas gifts and one of them does not connect to the wireless router.
  Is the error that says "error message unknown" try please login again.

  The wireless network appears in the list of networks available with a strong signal. Notepad attempts to connect but the error 'wireless link failed for an unknown reason. " Made a comparison with the other laptop that works very well and the configurations appear to be identical!

  Tried it on wireless network from a friend with the same result. All suggestions, am pulling out my hair at this point.

  Seems to be a Vista issue.

  I found this article Ms knowledge base:
  http://support.Microsoft.com/kb/928233/en-us

  You need to add a value in the Windows registry.

  1. Click Start, type regedit in the search box, and then click regedit
  list programs.

  2. Locate and then click the following registry subkey:
  HKEY_LOCAL_MACHINE es\Tcpip\Parameters\Interfaces\ {GUID}
  This registry path, click the (GUID) subkey that corresponds to the
  Network adapter that is connected to the network.

  3. on the Edit menu, point to new, and then click DWORD (32-bit) value.

  4 new value #1, enter DhcpConnEnableBcastFlagToggle, then
  Press ENTER.

  5. right click on DhcpConnEnableBcastFlagToggle, then click on modify.

  6. in the value data box, type 1 and then click OK.

  7. close the registry editor.

  concerning

• USB ports on the Satellite L30-105 does not work after the downgrade from Vista to XP

  Hello

  Model: Toshiba L30-105 PSL33E-02S02HFR.
  USB ports (2) do not work after the downgrade from vista to Windows xp family. All the drivers downloaded from Toshiba Web site.

  Thanks for any help,

  Camellia,

  Have you installed Win XP all service packs?
  SP2 provides some patches on the USB feature.

  You definitely need to update the Win XP OS

• Keyboard shortcut tab does not work on the first cc pro trial version.  Is this normal?

  Downloaded a trial version of the first cc pro on my new iMac 5 k.  Don't really know why I've bothered I'll get the full package anyway.  Thought I run and pop in some "dailies" to another project, everything worked fine until I tried to customize the keyboard shortcuts.  I press the tab and nothing happens.  Is it because it is a trial version?

  Sorry for the slow response.  Recently, I've been up to my eyeballs in work! (not a bad thing).  Ronin thanks for your help.  I had a quick glance at this link, and there are some useful things there.

  It turns out that I solved the problem otherwise.  All I had to do was clear my settings synchronized and then re-sync! can you believe that!  Now when I select shortcuts keyboard in the window menu opens and I can customize it further.  Before, nothing happened when I chose keyboard shortcuts in menu drop down!

  Maybe it's a weird solo bug that only happened to me, I hope that no one else suffers this infuriating thing!

  See you soon