Satellite L20: Modem does not get dial tone

Similar Questions

• Satellite Pro 6100 Modem does not - No Dial Tone

  Hello

  I'm in terrible trouble. I have a big meeting Friday and discovered that the internal modem on my Satellite Pro 6100 does not work. I downloaded the drivers of software Modem since the support site, and the installation seemed to go OK. There are no conflicts listed in the Device Manager, and when I query the modem to in the properties of the modem (from the control panel), it seems question OK too, but...

  HE DIDN'T THERE WAS NO DIAL TONE!

  I don't know that it is connected to my phone OK. Instead of a tone, I hear a loud hum, with a series of clicks. I can't hear being composed either DTMF tones, even when I disable "wait for dial tone. This behavior is the same if the modem is connected to the phone line.

  I have a big rally Friday and will need this modem to work... any help would be much appreciated...

  Thank you

  Matt.

  Hello
  that doesn't sound so good!

  The measure where I read that your ad you´ve checked your system almost all.

  Right on the thing, have you installed a firewall or other programs to check system that denied access to the modem?

  It is also ok, you should let check your laptop on a faulty Modem.

  Good bye

• Satellite L20 modem does not work in some cases

  Hello

  a friend bought a Satellite L20 last summer. In January, she started working on the Internet on an irregular basis, but has known trouble. So I looked after the laptop last week:

  When you try to connect to the Internet connect to the provider sometimes fails. If she finally gets the connection, it often occurs the message that the page could not be found, and only after clicking on the button "Refresh" the page several times finally appears. But oddly enough, every time I unplugged the power supply connection become noticeable better.

  (Win XP; pilot/diagnosis: no problem arose; provider works very well on different computers)

  Unfortunately, he had no chance to check the connection here with a different material. I can't say if the latest driver is installed, but think that Yes, because of the date of purchase. So, my guess is that the power cable is not adequately protected. But if so how? Or what else could be the reason for the unexpected behavior of the modem?

  Thanks for your suggestions!

  Hello

  I heard a similar problem with another model of Satellite. Solution was to install the Satellite A110 modem driver. Please don t ask me why, but test it.

  The modem driver, you can find HERE

  Good luck!

• Satellite L20-217 does not start

  Hello
  can anyone help?
  I have a Satellite L20-217 and it just stopped working on the other day.
  It was connected with the AC adapter, all of a sudden the message came on the screen saying my battery was low so less than a minute the whole machine has stopped working.
  I ve bought a new power supply and the s is still running is not on. I ve took out the battery for 2 minutes etc... and still nothing; West not sound and no lights.
  When the battery is in and the adapter is hollow area I still get nothing, but if I press the power button the left hand LED will blink for a few seconds then nothing again.
  I really need to get this working as I´am a tattooist and piercer hairdresser and there all my drawings etc. on it.

  Thx for any help

  You can start your laptop with AC power only (the battery is removed)? If so, start windows and after a few minutes, put the battery inside and post the result.

• Satellite L20 - battery does not work

  Hello! Today, I tried to turn on my laptop only with the battery and does not work. When I connect charger green light lights up but when I disconect charger all disappeared... .not workink... Whats happened? :(

  Hello

  Sounds like a dead battery.
  How old is your laptop and how long have you used the battery?

  As I remember, the duration of battery life decreases after about 1.5 to 2 years.
  It is approximately 500 loading and unloading procedures.
  For me it s not unusual that the performance of the battery goes down because the similar symptom happens for example with a cell phone battery.
  I think you should ask the Toshiba service partner in your country for the new battery.

  Greetings

• Satellite L20: drive does not recognize blank CDs - incorrect function

  My CD-RW/DVDR drive works perfectly as a DVD player, but when I insert optical media blank to copy a CD the drive is not automatically recognized by the computer (as it would when a DVD or CD is inserted).

  If I go to "my computer" and double click on the D drive and I get an error message saying "D:\ is not accessible. Incorrect function ".

  Hello

  This behavior is noticed by many users on various forums, and it is obviously not new. If I understand you right reading CD and DVD is not the problem.

  You can create CDs and DVDs using any burning software pre-installed? Does your drive read data self made and CD and DVD movie

• Satellite L20-153 may not get the WLAN to work

  Hello world

  I have a problem with my laptop wifes that I've not been able 2 fix.

  Its windows had crashed and wouldn't start in 'BACK' keept marker just flashes and nothing happened, I tried to restore to later work windows, but that did not help, nor the integrated security mode. So I took out the CD/DVD recovery and tried to do a new installation, the configuration of the installation has functioned well until he asked me 2 remove the disc and restart the comp I did.

  When it restarts the same problem appeared (flashing marker and nothing happens).
  So what I did I took a normal windowes XP (SP2) and reinstalled eveverything (I formatted the drive also) and rebooted and it worked.

  2 my next challenge is 2 get all the hardware working I got all all work, but the WIFI network (integrated).
  After I installed everyting I saw my network wireless but next time I started the comp, it disappeared along with all other WLANS that I use to be Alba 2 see. and when I still have refreash sound empty.

  I tried to disable it and then turn it on again but it doenst help.

  I also tried once more to use the Toshiba recevory drive but you have the same problem.
  So now I'm back with my windows Xp is installed, but I can't get the WLAN to work.

  There isn't any conflics material.

  So now I need your help about how to do 2.

  tanks a lot.

  Kind regards

  Quickhat

  Hello

  On WLAN, there is actually no philosophy, and few things are important:
  The wireless network card must be installed properly (properly listed in the Device Manager) and
  It must also be enabled. Initially with switch WLAN (WLAN light is on) and then activate it by using the FN + F8 key combination.

  After making this key WLAN card should see all available wireless networks. To connect to one of them is another theme.
  To be honest I didn't understand exactly what is happening. If I understand you right your laptop can see WLAN but after reboot all available wireless networks is not visible. Am I right about that?

  Have you tried rebooting your WLAN router and restart analysis the WLAN area?

• Why Satellite L20-183 does not support Vista

  I wonder, why didn't you support for L20 - 183 for vista because I own this model and inserted 2048 MB of ram and 100 GB HARD drive!

  Simply it is not fair at all because I'm more powerful model now then L30.
  Should I change my laptop for some other non-Toshiba one or buy a new one?

  P.S. I'm not planing to play with my money...

  Hello

  I don't understand what exactly is your problem. What do you think average, what is the problem? Didn t, you will find the drivers for your toshiba computer?
  It would be really interesting today to the point of your ad so explain it please! And btw. Noone from Toshiba here is to give support, here's
  just users like you and me, and we try to help each other.

  Welcome them

• Satellite L20 fan does not stop

  Hello!

  I have a problem with my Toshiba laptop fan:

  It starts to spin and cools the system but doesn't stop until I stop the system and restart.
  The temperature is 37 ° C at the disk and 47 ° C for the CPU.
  I have no idea why the fan stops not more and its very annoying...

  Thank you for your answers

  Hello

  You have installed the Toshiba power saver on your device? Generally, all Toshiba laptops preinstalled energy saver. This program is responsible for the performance of the processor and the fan. You must enter the energy saver and check settings that control the cooling.

• Satellite L20-121 does not start normally

  Hi guys

  Can someone tell me what seems to be the problem with my pc. I can start t normally, after contact with TOMORROW TOSHIBA, the screen stays white with Dim lights and I have to press F12 or entry to load windows. Sometimes I can't drag files, write messages and also whole system gel, I push the window button to proceed on everything I do, I hope someone help me.

  Thank you

  Hello

  HARD drive is set as the first boot device in the BIOS settings? Check it please.

• Satellite A30-504 modem does not

  Hi all

  Old old old Satellite A30 504 my father had problems of modem for quite awhile. Here are the symptoms exposed:

  Modem is recognized as "TOSHIBA Software Modem AMR" and classified works correctly. However, when you query the modem, I get the following message:

  + The port that the modem is attached could not be opened. This can be the result of a hardware conflict. Check the Device Manager to verify that all devices are functional. +

  Settings of resources:
  Range of e/s-2400-24FF
  E/s series 2000-207F
  IRQ 7
  (I can't change any of these settings)

  Needless to say that the modem does not work.

  Has anyone ever met such a problem before? Does anyone know of a way to fix this? I really don't want to get a PCMCIA modem for this laptop, so any help would be greatly appreciated.

  Thank you in advance!

  Dan

  > I have reinstalled Windows XP twice
  How? Do you use the restore disc Toshiba for the installation of Windows XP Home edition?

• Satellite A30, Win XP Pro SP3 - modem does not work

  Another problem with this laptop Satellite A30
  The built-in modem does not work.

  * Explanation: *.
  The driver is correct and downloaded from the Toshiba support site.
  The modem is identified as "Toshiba software modem amr" and is installed on com3 port.

  When I click on "diagnosis" and "ask modem" (right labels can be different, since my is an Italian win xp, I just translated the Italian labels), a window pops up saying: it is impossible to open the door (port), the modem is connected to.

  I tried to change the com port of the modem to different numbers, but the problem is the same.
  I don't know if the modem is a real map connected somehow to the main Board or is built right on the main map. It would be the first case, I may change see ad. BTW, the mini slot pci is already occupied by the gigabyte of Wi - Fi, so the modem must be elsewhere.

  This is strange, since I've done at least 2 other win xp pro on this machine facilities, always download and install the appropriate drivers, and the modem has never worked.
  Thank you
  S.

  Hello

  Have you installed the SP3 Windows XP Home edition, then the drivers or SP1 and later updated to level to the SP3 version?
  > It's strange, because I did it at least 2 other facilities on this machine pro win xp
  What other facilities?

• Satellite Pro A10 - Modem does not

  I recently reformatted my laptop using recovery discs. The internal modem does not work. It is recognized by the computer, but I get the message "the port that the modem is attacahed to could not be opened." This can be the result of a hardware conflict"when I query the modem in Device Manager. Also, in the Device Manager there is no indication of being recognized COM port. What can I do?

  Hello

  First I recommend you remove the modem from Device Manager, and then reinstall the modem driver.
  It is not necessary to assign any COM ports manually. After installation of the modem driver all have to be configured automatically. Do not forget that you are using the modem driver good for the country where you live.

• Satellite A200 - 1 GB: my modem does not work - remote computer is not responding

  My A200 - 1 GB modem does not work correctly. It tries to connect, but at last he said computer remote does not respond. As I noticed it has a modem 56kpbs of "I agree."
  It is shown as Toshiba Software Modem.

  I tried so many times it does not work properly.
  I tried changing the COM ports assigned to several other ports like COM1, COM10 COM, COM 4 ext... same thing happens.

  When I diagnose the modem via the properties of the modem without issues considered.
  Even when I'm component via the modem to a telephone line (I mean as a call) it works fine.
  I mean that he can call on a mobile phone or phone of the Earth.

  A few times he suddnely connects but connected sppedis 24kpbs.

  But the same phone line works correctly with my modem office both as the same as another modem from the laptop.

  It seems that there is a fault on my modem 56 k.
  I tried even uninstall and reinstall, but the issue still exists.

  Can someone help me in this case?

  Hello

  I don t think that the modem would be malfunctions.
  Fact is that if you use the wrong modem configuration, the line may be busy and the modem would not answer.

  I recommend you configure the modem again.
  In programs-> Toshiba-> Networking, you would find the Modem region Select utility that must be configured for the same country.
  Delete the existing profile and create a new!

  Best regards and good luck

• Why Satellite Pro A300 does not start when you press the power button?

  Suddenly my new Satellite Pro A300 does not start correctly when you press the power button. The situation is the following: when I press the power button is displayed the opening of Toshiba (Leading Innovation) and the disappers image quickly. Then there is a black screen for about 30 seconds. There is a rectangular frame with the text Microsoft Corporation under. And nothing happens however long wait.

  In order to get with the trial starting I then shut down the computer by pressing the power button until the computer turns off. ("The hard way to close")
  Now, I press the power button shortly to turn on the computer. Then, the computer starts normally with the photo to open Toshiba and after a few seconds, I wonder to open the computer in safe mode or in normal mode. I now choose to open in normal mode and the computer opens normally and is ready to work.

  What should I do to get a normal departure procedure?

  When the laptop starts normally (after choosing normal mode) stop your laptop properly using START > shut down option. Next launch should be normal.

  When the OS is moving towards the low irregularly will always ask you how to start this new (secure or normal mode).
  The same thing happen on my Satellite A300.