Satellite L30-10 s - does not start after RAM uprade

Hello

I've updated my 512 MB of RAM with one of my dads old 512 MB RAM from another laptop upgrade to a 1 GB. It shows the black screen saying Windows Vista startup repair. Then I have the choice of the common eider "Launch Windows Startup Repair" or "start windows normally". What we I choose I get a popup saying "Windows Vista startup repair failed launch" and then theres only 'Ok' or 'X' and eider there click you on it shuts the laptop! Then I start again and it does exactly the same thing for the Common Eider option grey-headed!

I don't have any idea what to do now, and the only choice is to bring a professional and pay for repair which I did not have money to make. I can to fix on my own? I know a few people saying updating the BIOS but how can I if the display does not illuminate.

_Before you leave a response, I want to clarify that I removed the 512 MB of RAM on the other laptop and the same thing happens. _ there is nothing I can do! :(:(

Help, please

Ryan

Hello!

I think that your installation of Windows Vista broke down because the RAM did not work properly in your laptop.
You should only use manufacturing even modules with the same specifications.

However, have you tried the Vista repair option with the original of the RAM?
If it doesn t work I think you need to reinstall Windows Vista with the installation disc. :(

Good bye

Tags: Toshiba

Similar Questions

  • Satellite A300-15 a does not start after the installation of the alcohol program

    Hello...

    Satellite A300-15 has, I bought yesterday and after completing the installation of Vista, I tried to install "Alcohol" but my judgment of the laptop and now I'm not able to boot up the laptop.
    It does not start in any mode.

    I forgot to make recovery disks. I think that alcohol is not compatible with Vista. Error I get is below.

    Can someone tell me the solution?
    Please help urgent

    "A problem has been detected and Windows has shut down to prevent damage to your computer.
    If this is the first time you've seen this Stop error screen, restart your computer. If this screen appears again, follow these steps: blah blah... "

    Looks like a problem familiar to me, as I had the same one with the Daemon tools. After installing these tools, I couldn't start my Windows XP. I guess that it somehow mixed upwards of some drivers or registry entries, but not sure about that.

    OK, you can try to uninstall tool first start Vista in safe mode (press F8 before Windows starts upward).
    You should then be able to enter in Vista without problem.

  • Satellite U200-179 often does not start after the installation of Ubuntu Live CD

    I'm installing Ubuntu edgy on my new computer toshiba laptop U200-179.
    I install linux without problems from the live CD, but when I try to restart the pc, often it does not start.

    During booting linux runs the utility to check the file system, although it seems that everything is ok and the boot stops.

    I also tried a different distribution (Knoppix 5.01), but with this one, the installation process stops at the beginning.

    What could be the problem?
    Luca

    You have upgraded to the latest version of the BIOS available (3.30)? The previous (2.40) had problems with some Linux distributions...

  • Satellite Pro A200 PSAE4E does not start after upgrading BIOS XP

    Hi, I need help!

    computer laptop, tested just got everything ok with Vista business and everything works fine.
    Now, I have a requirement to test a laptop duel boot XP build and follow the attached instructions to change the BIOS so that I can install XP.

    Restarted the laptop with the bios disk selected bios XP and everything seems ok.
    The phone rings, I answer. When I finished, I think back to the laptop and screen is white.
    Leave it for 20 minutes still white. Stop the laptop and reboot, no tosh start screen, nothing.

    Now does not start, so what do I do to get this thing working again?

    Hey Buddy...

    This looks very bad! :(il ressemble pas à quelque chose a mal tourné àle cours de la procédure de mise à jour dele de BIOS, et donc l'ordinateur portable ne peut pas démarrer correctement.)

    I hope that the ROM module must be flashed again.

    This can be done only by an authorized service provider.
    I see no other solution for contact ASP in your country and ask for help and handling.

    Good luck and best regards

  • Satellite L50-A-160 does not start after the Bios Update

    Hi, first of all, this is first post.

    I have 2 satellite L50-A-160 with bios 1.1

    Problem: seems to go to sleep after a few minutes, even working on them (even with both)

    So, I found an updated version 1.9, downloaded and running on one of the laptops. the biosupdate tool found matching the BIOS and a race.
    In the middle of flashing, he fell asleep. turned on and not start. What can I do? Recovery options? I guess the same thing will happen with the other too...

    What is the problem with these computers?

    Besides; very poor battery, always shows 0% available and not charging...
    Does anyone have a solution?

    Best regards
    -always in the hope.
    GT

    Have you tried to change in Power Options?

    See screenshot and try to change the ones I marked (it can refresh the settings, just change the values) and see if this solves the problem.

    and for the other laptop with no boot, a laptop sleep by updating the bios will surely mess it.

    what I don't understand is why your sleep laptop BIOS update, as far as I know the sleep settings is active then on windows (since this is controlled by windows)
    He does not sleep while in the BIOS you leave 1 year, sleep settings active only after loading windows.

    have you tried to check the time of processor for your laptop? Maybe its overheating causing auto-off

  • Satellite M50D-A-10W does not start after the battery is completely empty

    I have a laptop Toshiba Satellite laptop Satellite M50d-A-10W AMD A, 15.6.

    I have problem when the battery is completely empty I have to use the needle achieve hard reset the switch behind the laptop... so I can't enter in bootmode with f2

    How can I solve the problem?

    Thank you

    I guess you are talking about the shutdown procedure force as described in this document:
    http://APS2.toshiba-tro.de/KB0/TSB3C03JR0000R01.htm

    This problem can appear in case the PC freezes, do not start or has a power failure.

    I think that the laptop turns off in case the battery is completely empty. In this case the system does not close properly.
    As the default state, the system keeps laptop but usually the unit carries out a stop of the hybrid. This procedure allows the laptop to start much more quickly, but it could affect the system startup in case something goes wrong during the process of closing.
    You can disable this hybrid mode and in my opinion, it is also recommended.

    Details:
    http://APS2.toshiba-tro.de/KB0/TSB2B03EY0002R01.htm

    However, to avoid these problems, it of very important to correctly perform the closing procedure.

  • Satellite Pro S300-120 does not start after replacing the CMOS battery

    Hello

    My friends laptop - a S300-120 - was having a few problems.

    I replaced some parts about this before, including a screen crack with no problems.

    However, he began to refuse to start saying "out of battery CMOS, Press F1 to enter setup". Of course you would have to do this, set the date and time, except & restart only to get the same message. We have replaced the CMOS battery with a with the same serial number and now the laptop will not boot.

    It does one of two things.

    It is one) seems to turn, turn to the top disk & CD player, cooling fan is 100%, then flashes the POWER ON led once, twice by orange, and then green to 1/2 second intervals, with no response from the keyboard or LCD.

    Or (b) turns on, turntable, does not turn up to cooling fan, POWER ON witness remains stable, no response from the keyboard or LCD.

    I re-assembled the laptop several times & can not find all the missing fittings or obvious signs of damage.

    The only thing I can think is that the motherboard has been damaged - somehow find replacements is delicate.

    Any ideas?

    Hello

    (> It is a) appears to turn on, turn the disk & CD player, cooling fan goes to 100% and then flashes him

    POWER ON led once, twice by orange, and then green to 1/2 second intervals, with no response from the keyboard or LCD.
    Usually, if the voltage in abnormal feeding malfunctions when IN DC will be blinking orange.

    In my opinion, it looks like a problem with the motherboard :(
    Eventually, you will need to replace the mobo ;(

  • Satellite Pro M10 PS630E does not start after upgrading CPU

    I tried to install a new processor for my Toshiba Satellite Pro M10-PS630E.
    He initially has a 1500, I tried to put a 1766.

    I follow the maintenance manual, later the computer change is not star upward.
    When I connet to power it show that the luminous power of orange/amber color and make 5 flashes, then 3 and then restart blinking.

    My question is "is it posible to do a reset of the bios parametrers" or "reset the CMOS?
    Is it possible to get it working again.

    Hello

    The flashing light means that it has detected a hardware problem on the motherboard!
    Perhaps you have used a wrong CPU and is not compatible.

    Perhaps the BIOS does not support this processor and therefore this flashing error code appears.

    What say you can't update the BIOS! First of all, that's not possible since only focused on the victory of BIOS is available for download. You must run the Windows operating system to update the BIOS.
    Secondly the update of the BIOS won't help you with this problem!

    You must use a CPU that is fully compatible!

    Welcome them

  • Satellite Pro A60 EN does not start after you have used the recovery CD - isapnp.sys missing or damaged

    Help am stuck with it.

    Necessary to perform a recovery on the laptop and used the recovery CD 2 they seem to work OK. No error during installation, but after that they finished and it restarts didn't get the following message.

    Windows could not start because the following file is missing or corrupt:
    System32\drivers\isapnp.sys

    You can attempt to repair this file... etc but I don't have any original installation CD all have is the recovery for the Toshiba.

    I have a setup of Windows XP for the PC disk, but when I try to run which, but it starts just the configuration. Setup is loading files and after the kernel debugger get error

    "File ntkrnlmp.exe could not be loaded.
    The error code is 4, sometimes it's 7.

    I tried to delete and recreate and formatting partitions, so I can see and I can copy a file to the C: drive

    So any suggestions as to what wrong here

    Thank you very much

    I put t know if this Microsoft Knowledge base article would be useful for you, but you should check it out.

    [You receive a "Windows didn't start because the following file is missing or corrupt: Isapnp.sys" error message at startup | http://support.microsoft.com/kb/315311]

    Microsoft has a solution, and I would like to know if you can solve this problem by following the steps of the solution described in the article.

    Feedback would be much appreciated

  • Satellite Pro A200-1MA - does not start after disassembly

    This is one for my laptop was overheating strongly and I decided to clean the radiator and the parts around it. I disassembled the computer laptop to the point where I can take off the cooler, cleaned and then I put everything back. The problem is now it won t work.

    It starts normally, past in loading windows (I have Windows 7 sp1) and then after 10 seconds, or it just stops. I tried to go to the bios, but it does the same thing after 10 seconds. First, he showed BSOD with no explanation. Just somewhere stopped working and it has to stop, but I can't figure what. CPU should be fine, it can t overheat in 10 seconds if it s cooler nor starts loading Windows in order to RAM and HARD drive may also be excluded.

    My best guess is that I'm connected to something wrong, but I disassembled it 3 - 4 times today and can t find something that is not connected. When I remove the top plastic I need to disconnect this son: speakers, power button, touchpad, keyboard and one other connectors 2 or 3 which I am sure they are USB, LAN & maybe etc...

    Then, can you at least tell me where to start? What to check?

    Hey,.

    I also can say with certainty what happened exactly, but fact is laptop disassembly is not easy and should be made only to professionals. If you take apart a laptop computer, you must be connected to the land, for example to avoid electrical damage.

    Anyway, everything you can do test your laptop with factory settings (preinstalled OS from Toshiba). If you notice the same problem it s a serious malfunction of hardware and your laptop should be verified professional people.

  • Satellite Pro A120 (PSAC0E) does not start after upgrading RAM

    Hello

    I hope someone can help me here, I recently bought a Satellite Pro A120 (PSAC0E) and decided to upgrade the RAM. I bought a stick of 512 MB of curries with the following specifications: DDR PC2700 200-pin 333 Mhz SODIMM (64 x 64).

    However, the first problem I encountered was an alignment problem. A little effort and handling solved this, but after you insert the RAM into the available slot, the computer laptop wouldn't boot, and instead, I had the flashing sequence on the LED from 2,3,3.

    I was told it might be a problem matching, then tried to remove the original RAM and booting with just the new stick, still the same error. I tried it in the slots and still no joy. It starts very well with the original 256 MB of RAM, but refuses to take the new RAM.

    Are there any known issues? Can anyone suggest something that I can do wrong? I followed the usual steps of upgrade to remove all power cables and the battery before the upgrade, but still no joy.

    Hoping that someone is able to help!

    Hi James

    You simply have bad memory modules and is not a compatible uses.

    > the first problem I encountered was an alignment problem. A little effort and handling solved this,

    This should not happen! The right modules can be inserted without any problem of alignment!
    Handling can damage the module!

    In my opinion, you should use another and supported the RAM module.

    To my knowledge, you can use the PA3512U-1M1G (DDR2-667 1 GB Memory Kit) or (PA3411U-2M1G) DDR2-533 1 GB
    The two should be compatible.

  • Re: Satellite Pro A210, stil does not start after you use the recovery disk

    Hi, my computer laptop girls stopped booting, I tried everything to fix this, but it seems to be on a loop.

    He runs the repair of your computer, but after a while, I get the message, this computer cannot repair this fault automatically (or something similar), there is also a message that says - if you have connected a camera or to this computer's portable music player, remove it now and restart.

    I tried to start in safe mode, safe mode with command prompt and last know good configuration but still no joy, so I eventually ran the recovery disc. Once it was finished, I was to square.

    Does anyone have an idea of what I can try next - other than to throw it out the nearest window.

    Thanks in advance.

    Hello

    Never heard talk of this error but sounds strange
    If I understood your first assignment; you were able to complete the installation of the OS from the recovery disc. Is this good?

    Well, in this case the HARD disk must be OK because the files were copied correctly

    I searched a bit in google and didn t have found a solution to 100%.
    Some have said that new OS install should solve this perhaps you could use clean up Windows Vista, Win XP disk

    You can also try to format the drive HARD integer first. Delete all partitions on the HARD drive, and then try again

    PS: You can check the HARD drive using the + Hitachi Drive Fitness Test. +
    Its free tool. You can find using google

  • Satellite C850 - 19(d) does not start after the UEFI to change CSM

    After wrongly BIOS change between UEFI for CMS, saving changes and leave, after execution of reeboot crazy screen and won't let me access the BIOS or Windows.

    SUGESTIONS?

    Thank you by the way

    What do you mean by "the screen turns crazy?"
    Start your machine and press F12 to get into the boot menu. You can access the menu?
    If so, there is also possibility to enter the BIOS settings. Try please o enter the BIOS settings on this path and set it to default settings again.

  • Satellite P300 - 1 - CD does not start after the Toshiba homepage

    Hello!

    My Toshiba won't start, and I can't press F2, F8or F12.

    I disconnect the battery, tried to take out the HARD drive, everything!

    And I can't absoloutley nothing when I turn it on no button on the keybored do nothing.

    Help, please!

    > My Toshiba won't start...
    Why? What is the problem here? What did you do? Usually, something like this can happen without reason.
    Have you tried to update the BIOS or what?

    What happen exactly when you press the power button / stop?
    Try to remove the RAM and HARD drive and try again.

  • Re: Smoker L30-10 X PSL33E does not start after upgrading RAM

    Hello

    I have a problem with my laptop.
    It has 1024 MB of RAM (2 x 512), but it wasn't enough, so I decided to update to 2048 MB (2 x 1024).

    I bought two modules and my computer does not start after changing them.
    It was only a screen black (same BIOS has not started). I tried another combination of installation of memory modules RAM.
    2 x 1024 - did not work
    1 x 1024 - did not work
    1 x 1024 + 1 x 512 - working but not properly.

    BIOS find that I only 896 MB (1024-128 for the video card)
    I said OK. Let's see what will show windows. He was also 896 MB.
    I launched CPU - Z and it shows that the total size of memory is 1536 MB (medium detect both modules).
    I found that CPU - Z detect 1 module 1 024 MB and 512 MB secondary, but the BIOS detect only 1024 MB 1536. How is that possible?

    I have fought, is that my BIOS is old, then I update the toshiba Web site form most recent version, but the problem persists.
    Please someboy help me and tell what to do.

    PS. the Modules are new and work correctly.
    They have been tested.

    Hello

    Have you used two identical RAM modules?

    What kind of modules did you use?

    In my view, that the problem is related to the new, inserted modules.
    There must be something wrong with the modules or modules are not completely compatible if the laptop can not boot after installation.

    According to a few pages of the book handles the DDR2 533 MHz (PC2-4200) 200-PIN SODIMM modules.

    Did you use these modules?

Maybe you are looking for

  • If iMovie saves without loss?

    I have a lot of mpeg-4 files that I created in iMovie. If I put them back in and re-record the (I want to change the title screens) lose image quality (assuming I have save the same HD setting as before) in not edited portions? If so, is there to do?

  • The e-mail synchronization

    I raise this again because I never set it last time, and he's still stop me using my MacBook Air for e-mail application. The problem is that I can't the mail app on the MacBook to sync with my Ipad Air or Mail applications on my iPhone more 6.  All t

  • I CAN'T UNINSTALL THE FILE UPDATES

    I have a problem with the file of updates to uninstall windows vista 32-bit, my laptop are updated for the installation of the file automatically, when I try to uninstall this file in the system control panel, there is no words to fie.how to uninstal

  • XP Home: User Log-on attempts lead to endless loop

    After moving our household to a regional setting UN-cyber-friendly, our desktop PC went seven months without access to the internet (may to December 2013).  Using the service for the first time yesterday, I installed blindly Express all the 30 + auto

  • When you connect, windows mail continues to open

    I am stupid or what, help me... I sign in to windows live mail... so I decide to do later, if I click, cancel. Instead, the live window continues to open up, even without the password. If my laptop is in repair or upgrade, then anyone can see my mail