Satellite L30-101 will not boot after memory expansion

Similar Questions

• Satellite L30-105 will not boot after memory expansion

  Hello

  I have a Toshiba Satellite L30-105, with 1 GB of memory (2 X 512 MB modules).
  I bought 2 X 1 GB-compatible modules to extend the memory to its max.

  When I install the two new modules the laptop won't boot. I tried to install one at the time and both work individually. I also tried 1 X 512 MB
  and 1 X 1 GB, which also worked.

  Help I have updated the bios but still can not computing for work with 2 GB of memory?

  Thank you
  Rebmark

  I am also interested what compatible modules you use.

  Just FYI: your laptop model can handle with 2 GB RAM and compatible module - 1 GB DDR2-400/533 (PA3411U-1M1G).

• After downgrading from Vista Satellite L30-101 does not read DVD

  Hey,.

  Like many people, I didn't like Vista and so returned to the use of Windows XP.

  In doing so, I lost a lot of things like the ability to watch DVDs and sound, most of these problems fixed so easily by downloading the drivers from this site.

  However, even after the DVD driver download I can't read DVDs yet.
  When you try to play through Windows media player I get say error message that I did not have a MPEG-2 decoder, in the section web site help, it suggests where to get one, but you have to play for each other.
  After having one in the first place, I don't think I should buy a new one.

  If anyone has a solution it would be greatly appretiated if they could let me know.

  Thank you

  PS I have a Satellite L30-101

  I think you have a codec problem, but I'm not sure. Maybe you should install the latest version of Media Player and codec Xvid, DivX and AC3. These are free (google it!). Or you can try alternative software, such as WinDVD or PowerDVD, you can try the demo versions.

• Satellite L30-101: could not connect to Orange Livebox via WI - FI

  Hi all

  Bought my first laptop today, a Satellite L30-101 with Vista. I finally managed to connect to my livebox after filming of encryption and the Vista firewall. Now, I turned as well on I can not connect. I get a msg of error saying 'the settings saved on this computer do not match the requirements of the network. I tried to repair the i.p address and tried to change the security settings in the properties.

  Ideally, I would like to completely remove the existing profile then the Connection Wizard may start. This is probably very simple, but I am new to wifi and Vista and would be grateful if anyone could offer advice.

  Concerning
  Dave.

  Hi again,
  Following the previous, I have more the error msg. I changed the Livebox WPA security only and on the L30, I put the WPA-personal security type and TKIP encryption.

• Satellite L30-PSL33 does not illuminate after hibernation

  Hello

  as I said in my previous post, I also have a problem with the Hibernate. The thing is that when I leave to transform a hibernation on this more later sometimes not loading Windows - the load bar coming to an end and then it stops 'thought' so I have to stop it and start it...

  The operating system is Win Xp Pro SP2 on Toshiba Satellite L30-PSL33. For example, it loads Windows hibernation 2 or 3 times, and then after that it will not load the operating system.

  Please give me an advice how to fix this...

  Thank you

  It's not easy to say what s may be wrong because like you say so this problem happens sometimes and that's why he of not easy to reproduce this error.

  I m an owner of a Sat L30. I use Vista on my L30 and received no similar problem.
  I talked to some people, and also read on some sites Internet computer that this error could be related software.
  One question; what OS came preinstalled on this notebook; XP or Vista?

  Maybe you have updated the operating system on your laptop to the last State.
  Please also check if the third-party programs 3rd n t assigned the wrong operating system.

• Satellite L30-134 will not accept 2 GB of RAM

  I looked at my laptop and it takes a maximum of 2 GB of DDR2 RAM, I tried two different pairs of sticks of 1 GB and the two blue screen that loads the OS.

  When the sticks do not go it simply ignores the second run, but I can't seem to accept 2 GB.

  BTW I have upgraded to a core duo processor, don't give me no problem.

  Known fixes for this problem?

  Hello

  Your laptop can be upgraded up to 2 GB of RAM. That s is definitely possible!
  You can use 2 modules of memory vivid x1024MB.

  If you would taka glance at this page, you will find information that you must use the DDR2 533 MHz (PC2-4200) 200 - PIN SODIMM modules.

  [Memory for Toshiba Satellite L30-134 | http://www.orcalogi.co.uk/asp/prodtype.asp?prodtype=25737&ft=m&st=3]

  I presume that you always get a BSPD because the RAM modules are not fully consistent or simply malfunctioned.

  Welcome them

• Any ideas why my Satellite L30-101 is not turn on?

  I have a L30-101, which does not any power whatsoever.
  There are 19v from the Jack that goes in the back of the laptop but where it goes from there I don't know.

  None of the lights on the front of the machine to recognize any signs of power. It will not charge the battery is totally dead
  Someone at - it ideas? The laptop had no much use, as was a second device, but it just won't work and driving me crazy. He won't show signs of life at all.

  Any help would be appreciated.

  Lewis

  > It 19v come from the Jack that goes on the back of the laptop but where it goes from there I don't know.
  > None of the lights on the front of the machine to recognize any signs of power. It will not charge the battery is totally dead
  > Anyone has any ideas?

  How about a dead motherboard?
  Failure of the motherboard may be the reason for this

  It would be the worst case since the motherboard is some of the most expensive and deeper cases there s no need to replace it as a new laptop would be more expensive

• USB ports on the Satellite L30-105 does not work after the downgrade from Vista to XP

  Hello

  Model: Toshiba L30-105 PSL33E-02S02HFR.
  USB ports (2) do not work after the downgrade from vista to Windows xp family. All the drivers downloaded from Toshiba Web site.

  Thanks for any help,

  Camellia,

  Have you installed Win XP all service packs?
  SP2 provides some patches on the USB feature.

  You definitely need to update the Win XP OS

• Satellite L30: reader will not read CDs or DVDs

  In the evening, I was recently testing on various operating systems on my laptop and eventually decided to return to Windows Pro.
  It was working fine until a couple of days, but then the hard drive started making a rattling noise, like R/RW head stuck.

  Now it will not read CDs or DVDs, can someone please help and tell me if it's a failure of the software or hardware, and the best way to fix it?

  Hello

  The drive problems are not uncommon and may still occur.
  For the most part the purpose of calibration training does not work correctly.
  The objective must be calibrated in the correct position until the player will read or write to the media.
  This fault is not reperable and especially the drive needs to be replaced!

• Satellite L30-101: could not create restore Vista because of a sort of cliché point

  Hello!
  I tried to create a restore point for 2 days and I always get a message saying that cannot be created because of a sort of shadow copy restore point.
  OS-WinVista Home Basic .model - L30 - 101.Can someone please help me?

  Hello

  You must first disable cliché until you manually set a restore point.

  You can inquire about this system by clicking on this link, because it s a little too much information to explain it here:

  http://en.Wikipedia.org/wiki/Volume_Shadow_Copy_Service

  I hope that you can configure everthing as you want. :)

  Welcome them

• Satellite L30-101 does not turn ON after Vista update

  OK well my laptop has played lately and I have installed the new update of Windows Vista.
  Now my laptop didn't boot.
  It just won't turn on. I tried everything and its not working everything simply do not.

  Whats gone wrong turned with her and is anyway I can fix it?

  Hello

  Do you mean the laptop does not illuminate or only the Vista operating system does not start?

  You see the home screen Toshiba appearing at the beginning?

  Feedback would be appreciated

• Y430A can not boot after memory upgrade

  OS: VISTA HOME PREMIUM 32-BIT
  CPU: P7350
  MEMORY: HYNIX DDR2 667 2GB

  I added a 2 GB Kingston ram on the connector 2

  First of all, it can be the start and connect to windows,

  but after a while, the system of suspension or the SCREEN BLUE DEAD shows,
  He cannot even get into the bios screen when I reboot it

  but it can be boot up if I remove and reconnect the memory

  Sometimes the machine can be restarted and works correctly, except if once I turn it off

  I tried to exchange the slot 1 and 2 with 2 x 2 GB,

  and also replace with 2 x 256 MB Hynix memory.

  but it does not work.

  The new memory is not faulty or is not compatible because it works very well if it autonomous.

  In short, if I install 2 x 2 GB memory, the system may start only once.

  Is it the BIOS problem or it's my mistake?

  Please help and sorry for my bad English.

  Thanks in advance.

  This is perhaps due to the incompatibility of the modules of RAM, working together. If Yes, than to change only the modules will help.

  Also looks like Y510 behavior when it was a fresh model - Y510 all were not able to manage two RAM modules. Update the BIOS helped. For now no new BIOS for Y530/Y430, so will have to wait.

• Satellite A135: Vista will not start after replacing HARD drive using the recovery disk

  Toshiba Satellite A135-s7403 HARD drive failed, I have replaced the 80 GB with a WD Scorpio blue 250 GB hitachi. When I try to restore with recovery disk came with the laptop, it passes through two discs 1 and 2 and starts with the start-up of windows for the first time and then runs to the greenish with the spinner blue screen please wait... thne black screens for a second or 2 and then back to spinner, please wait and then it appears the box "installation of windows could not configure windows to run on hardware. This computer' only option is to click OK.

  Where to click ok, you get an another msg that says "windows could not complete the installation, install reinstall windows. I tried like 50 times now. Startup Repair indicates the root = failure cause while the installation program is underway. I know that my drive are good, as I adjusted used then about a month when I upgraded the memory because the original memory 512 MB was not enough o well running vista.

  Hello
  To be honest I n don't know what the problem is there but can you get the original installation disc of Microsoft and try to install the OS, just to see if the OS installation will complete successfully?

• Vista will not boot after installed updates

  After installation of .net Framework 3.5 Service Pack 1 for .net Framework Assistant updates. 1.0x86 (KB963707) and Windows Vista (KB968389) to my Dell XPS M1330 laptop, my computer did an automatic stop down. I couldn't restart my computer correctly after this {2nd time this has happened}. I restarted my time 1st comp by selecting the command prompt and the 2nd time by catering to last known position. I did all as usual by pressing F8, F12, F2, diagnostic test, memory test and a little more. Right now I'm running, but I'm going to be scared to do another update when the time comes. Can someone help me please on this issue. Many thanks in advance, Ron

  Hello

  1. keep good backups of your data using redundant methods.

  ------------------------------------------------------

  2. it is very possible that updates do not install correctly are the symptoms of the real problems
  and not the real cause of their.

  ------------------------------------------------------

  3 set updates download but you can install them - and you can install them one at a time if necessary.

  Control Panel - Windows Updates - left settings.

  and run it to restore updates

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  ------------------------------------------------------

  4 do these to erase corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ------------------------------------------------------

  5. record how to remove updates if necessary:

  Control Panel - Windows Updates - lower left Installed Updates - uninstall or change

  Or

  Remove an update
  http://windowshelp.Microsoft.com/Windows/en-us/help/182043da-fc3e-4220-AFBC-d9b09f2b2a1a1033.mspx

  Or

  The problems with the removal of updates
  http://windowshelp.Microsoft.com/Windows/en-us/help/5a319824-5cb5-493d-9151-9a97d0f565b61033.mspx
  Or

  How to uninstall updates in Windows Vista
  http://www.vista4beginners.com/how-to-uninstall-Windows-Vista-updates

  Disable or hide optional updates on Windows Vista
  http://www.howtogeek.com/HOWTO/Windows-Vista/disable-or-hide-optional-updates-on-Windows-Vista/

  ------------------------------------------------------------

  If necessary, you can get free reports of incidents.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Satellite L30 (PSL33E) does not recognize second memory slot

  I'm trying to upgrade a L30 for a friend. It came with 1 memory module 512 MB PC2 - 4200. I tried to add a 1 GB PC2-5300 SODIMM in the second housing and it does not pick it up. I replaced the 512 with the 1 GB and he found. Put the 512 in the second slot, still sees the 1 GB but not the 512. I tried 2 x 1 GB and he sees one of them. It reports 894MB as I guess he uses 128 MB of video memory.

  I've updated the BIOS, checked all the settings and I don't see why it woun't recognize the second memory location.

  Any ideas?

  Hello

  The second location is defective. It's the only plausible explanation

  But as far as I know Toshiba recommends the use of these modules;
  512 MB DDR2-400/533 (PA3412U - 1 M 51)
  1 GB OF DDR2 400/533 (PA3411U-1M1G)

  Maybe you should test notebook with such 1 GB module to make sure this isn't a problem of compatibility of memory.