Satellite L30 - 10Y - accidents with the radio on

Hello.

I got my Satellite phone for a little less than three years now and after downloading a plug-in for Firefox, I could not access the internet with a wireless connection on my laptop. Worse still, when I have the wireless switch on at the front of the laptop, there is no available wireless network (I usually get two of my room) and after a few minutes, the screen freezes completely and I have to turn off my laptop.

So far, I have uninstalled and deleted Firefox and the addon, but the problem persists. With the wireless off, my laptop works fine but I cannot access the internet without cable modem, which is a drawback.
Is anyone able to help me solve this problem? If so, I would really appreciate it.

Thank you
Hurricone.

Hello

It may be a driver related issue, try to update driver Wlan:

http://APS2.toshiba-tro.de/WLAN/?page=downloads

Tags: Toshiba

Similar Questions

  • Satellite L30 - 10Y black at startup the screen upward after the installation of new modules of RAM

    Hello

    I use the L30 - 10Y model with the following memory specification:

    standard: 512 MB
    maximum scalability: 2 048 MB
    technology: DDR2 RAM (533 MHz)
    expansion module sizes: 256, 512, 1 024 MB

    I use Windows Vista Home Basic Edition with a 32-bit operating system.

    When installing, I removed the standard 512 MB module and added 2 modules of 1 GB compatible. At startup, it stays on a black screen.

    However, if I removed 1 1 GB modules and put the old 512 MB module to give me 1.5 GB, it works.

    I was wondering if anyone knows why this is and if there is anything that I can try to get the maximum of 2 gb, if it is indeed possible.

    Thanks in advance.

    According to the product page Toshiba Satellite L30 - 10Y is able to manage 2 GB of RAM (2 x 1 GB)
    I think that the problem is related to memory modules not fully compatible
    I think a new, fully compatible RAM modules should resolve this problem.

    PS: You updated the BIOS? If this is not the case, check if a new update of the BIOS is available on the European driver Toshiba page.

  • Satellite L30 - 10Y always starts with the message of repair

    Hello

    Whenever I try to run my Satellite L30 - 10Y (PSL33E) I get the window with the message Startup Repair (Windows cannot repair this computer automatically).

    I went through the list full repair and still have the same message.

    Can someone please?

    Hello

    Maybe the operating system is confusing upward
    Have you tried to restore using the Toshiba Recovery disk?
    Check if it works!

  • Satellite L30 - 10Y: error checking after the 2 GB of RAM

    Hello

    I have a Satellite L30 - 10Y ^ months ago I walking the RAM 1.5 GB by adding a card of 1 GB of RAM in the 512 MB card provided it worked well.
    I also have walking my son Hi-Grade lapto with exactly the same specifications of RAM that worked well also. So I decided to grade until my L30 10Y with another card of the same specification to bring it up to 2 GB as specified by TOSHIBA.

    I booted the computer to find Hay presto after the message following the start screen appears * "_the file is possibly corrupted.
    The file header checksum does not match the calculated checksum_ "* the computer then froze and I turned it off."

    Controls, I did tried two cards into the two slots without change, 1 card in both slots (an empty) works very well. Other card in the two sons of slots (works Fine) the two card slots in my computer (works very well) all three cards and 512 MB card in the configuration of the slots and cards (works fine). The three cards 1 GB in all configerations cards and slots to the error message and other times 1 long beep and 2 short.
    Yes, the cards have been installed correctly. Impossible to change something to do with the BIOS, even though it may be accssed. Cannot run dvd player although I can select.

    I went back to 1.5 GB and reinstalled all OS the drive recovery Toshiba try all over again the same results. Running windows Vista Edition family Basic, Bios is the last download. RAM is compatible. Cheep Hi-Grade son accepts that all RAM in all Configurations without sentence windows XP operating system.

    Can anyone think of anything either, I have not tried, or I just have to go and by a Hi-grade computer?

    Hello

    I read your announcement carefully, and it seems that you have checked that everything what is possible
    So in my opinion the two ram modules are not compatible set
    It's the only plausible explanation for this problem.

    AFAIK the L30 - 10Y needs DDR2 533 MHz (PC2-4200) 200 - PIN SODIMM modules.

    Finally the short beeps are coming from the BIOS and it means that the error has been detected.

  • Satellite L30 - 10Y: Win XP - yellow? near bus in Device Manager controller

    Hello

    a problem with the satellite L30 - 10Y PSL33.
    In management of XP - other devices - system management bus controller device - it is to present a question mark with a small exclamation point.

    Maybe reinstall a chipset drivers, but I have not found a right driver in toshiba's site.

    You have an idea on this message and if is it all reinstall drive, what type and the parent link for download?
    Thanks in advance.

    Manuele

    Hello

    Hmm I don't very well if this entry could be linked to a m Chipset driver.
    But you can find the chipset driver yourself.
    Install a tool of diagnosis of equipment as Everest Home Edition and control hardware components. Then, you would be able to download driver chipset chipset manufacturer page.

    But in your case I recommend you delete this first device manager entry.
    Mark this bus controller and press to remove or uninstall.
    Restart the unit.

    Usually the Win XP should recognize and reinstall the device again

  • Installing WXP on Satellite L30 - 10Y

    Hi all

    I have a Satellite L30 - 10Y (PSL33E 03L031EN) (about 2 years), it is running Vista (installed come) and I'll replace it with XP pro SP3.
    I already have the drivers (from the Division of driver Toshiba), but I wonder if there are any issues that anyone knows how I could run in this case?

    I installed OS to my house several times, built offices with absolutely no problems whatsoever, but various articles I read there seems to be a bit of a 'ball game' different when it comes to laptops?
    Also I have Vista disks more so if XP will not install I can not simply go back to Vista.

    Tips, advice or warnings very welcome...

    Thanx

    ~ Q ~

    Hello

    Your laptop is supported for Windows XP Home edition, and there should not be any problems at all. For installing WXP using Windows XP SP2 home edition.
    Download page for all the drivers, tools and utilities that you can find on Toshiba.

    You can also find document Setup Instructions. Install all the stuff of Toshiba following this order of installations. It is very important.
    If you help please let us know.

  • Satellite L30 - 10Y - Touchpad freezes when AC/DC adapter is connected

    I am the owner of a Satellite L30 - 10Y for about 2 yars and only recently has my mouse trackpad, and once I have unplug again the mouse stoped working when I plug my cable is very sticky and hardly move.

    I need help because now I have to charge up, we it and load back to the top

    * fat * HELP * bold *.

    Hello

    I have a similar suggestions and proposals of solution;
    First check if you are using the latest version of the BIOS. If this is not the case, try to update.

    But to be honest, I doubt that this could be a BIOS problem. It sounds more like a problem with a hardware component.
    I remember that my friend had a similar problem.
    The Courvite of mouse and touchpad jumped on the screen and was not usable
    It's a keyboard question EPA has replaced the keyboard and the problem disappeared.

    But this does not mean that your keyboard is broken it is perhaps only an option

    Anyway, the ASP must check hardware components; for example, the new adapter must be tested too

  • PCMCIA card will not install on Satellite L30 - 10y

    Hi all

    I hope someone can help with this problem. I recently bought a PCMCIA card with additional USB ports for my laptop Satellite L30 - 10y. It works on Vista basic, anyway I shoved the card into the slot and let windows install the drivers, problem is it will not load I get an error message saying that the MDT-0002 device does not charge.

    Is it a Vista problem or Toshiba thing?
    Thanks for any help on this one
    Regards Ciaran

    Hello

    I doubt that it could be a matter of Toshiba.
    I googled a bit for this device MDT-0002 error, and this error using some PCMCIA cards on different laptops from different manufacturers under Vista OS.
    Someone said that the Pcmcia.sys (PCMCIA driver) must be updated.

    I also recommend to contact manufacturer of PCMCIA card support for more details on a few issues with the Vista operating system.

    Welcome them

  • Satellite L30 - 10Y is not available in my area

    Hello

    Anyone know why there is no such cell phone as a Satellite L30 - 10Y? When I first registered there I had re-registered and the laptop came as a satellite L30 (PSL33).

    When I tried to access by clicking on the link for laptop computer, the following message appeared * + (sorry, but this product is not available in your area.) + *.

    Can someone tell me why as I clearly one in my area? I checked the serial number and model that are correct. When first recorded I could access specifications of the notebooks but not anymore. Why?

    Very confused!

    Hello

    To my knowledge, Toshiba designs and develops a series of portable different.

    The L30 is one of the series and it contains several submodels as L30 - 10Y, for example.

    I have goggled autour and discover that the L30 - 10Y belongs to the series of _PSL33E_ and model L30 - * 10Y was delivered in Italy and England.

    I put t know you came but I'm sure you could find another L30 - xxx model with the same specifications of hardware in your country.

    Best regards

  • Satellite L30 - 10Y - how to reset to factory settings?

    Hello

    I have a Toshiba Satellite L30 - 10Y, I want to back to factory setting, but how can I do this?

    Thank you
    Niall

    Hi prescott91,

    You have the Toshiba Recovery disk? If so, it is very easy: just boot from that disk and follow the instructions on the screen. The recovery disk will delete the whole HARD disk restore factory settings and then recreate the partitions.
    So if you have important data on it, make a backup of it if not already done.

    But it is also described in your user manual. Have a look at. It s interesting documentation. ;)

  • Processor hard in Satellite L30 - 10Y

    I just bought a laptop Satellite L30 - 10Y.
    The specification of State she should have a Celeron M 440 1.86 GHz.
    However, when I check in the Device Manager it shows 420 M @ 1.6 GHz.

    The support line told me to go back to the Curry of Exchange because it's a D.O.A.
    I checked the view model in the store and found that it was the same, so an Exchange was out of the question.
    I went next to PC World and checked their view model...

    Yes, even again. When I pointed out to the staff of PC world, they said, obviously got it wrong like sound specifications clearly a 420 M @ 1.60 GHz.

    If anyone has another response that Toshiba have been fitted the wrong processor on their laptop computer.

    [Edited by: admin]

    Hello

    are you really sure that a M420 is in there? Maybe it s just a software thing?

    The best will be a biosupdate to check if just the bios is the reason that an incorrect CPU is displayed.
    Just upgrade to the latest version available and give some feedback if it solved your problem.

    Welcome them

  • Satellite L30 - 10Y: driver download problems

    Hello

    Can someone help me please? I have a laptop Satellite L30 - 10Y and try to download the updated drivers on the Toshiba driver download site for it however whenever I try to download it doesn't download propley stop the download or will simply not download.

    Yes, I noticed the same thing I hope this will be fixed as soon as possible!

    Mast of greetings

  • Satellite L30 - 10y does not start - BSOD

    I have a laptop Toshiba Satellite L30 - 10y.
    The problem is that the laptop does not start.
    I turn on the computer and the screen turns white and bottom screen then comes up for a fraction of a second that says...

    "stop: c0000218 {Registry file failure}".
    The registry cannot load the hive (file):
    \Systemroot \System32 \Config \DEFAULT
    or its log or alternation.
    It is damaged, missing, or not accessible writing. "

    I was wondering if anyonecould help me, let me know what this means and what I can do...

    Thank you very much

    Adam

    Hello Adam

    Here two interesting documents of Microsoft, but I really don't think that it will help you
    http://support.Microsoft.com/kb/307545/en-us
    http://support.Microsoft.com/kb/830084/en-us

    Maybe the best solution for you is to use recovery media supplied and install OS again. After that it all will again be OK.

  • I've had several accidents with the blue screen noting CRQL_NOT_LESS_OR_EQUAL

    Hello.

    Here are some files dump of my crashes: http://cid-5cfec8d823e42bd3.office.live.com/browse.aspx/.Documents

    Here's what happens:

    Since June, I've had several accidents with the blue screen noting CRQL_NOT_LESS_OR_EQUAL (Yes, CRQL, no IRQL level), and they are producing at closer intervals. I also notice some changes of office and some sounds to open files that are not have happened before. I run antivirus and malware and found nothing. I did a disk cleanup and defragmentation.

    I also tried to install via Windows updates and everything seems to date. I ran Windows Memory Diagnostic tool, and it found no errors. I ran Windows Startup Repair and got the following note:

    Root Cause found.

    Unknown bug control: one error checking.

    Parameters = 0 x 0, 0x817dc32c, 0x820e8114, 0 x 0.

    After the last crash, I got a message saying that Windows is aware of the problem and trying to fix it. Any ideas?


    Thank you in advance for your help!

    Hello

    Uninstall Faultwire and look for the codes manually as needed. The link to troubleshooting blue screen
    page will show you how to get them.

    How old is the system? A real computer store (not the leeks and glances at a Best Buy or other large surfaces)
    Stores) can help to give a proper diagnosis of the machine.

    You can use Safe Mode - repeatedly tap F8 as you start - use to back up your data in a redundant
    way off the machine. Then re-install Windows that "might" help if the problem is software partner.
    Of course, you will need to reinstall your programs and restore the data in the machine.

    Although there are a large number of errors there could be a cause for all. Try to remove ALL power and
    reinstall all the memory cards and cables (at both ends, when possible) - actually delete and replace.
    do not just tight. Clean the dust bunnies (of course those who are for a PC - for a laptop to ensure that)
    the vents are clear). Try using a small fan blowing through the vents to see if heat is a problem.

    Update key drivers - display/video, NETWORK card and WiFi (network), sound (do not forget to check the sound card drivers
    What update because they will often rollback then repeat the installation until the correct version appears), modem
    and all of the other major features, you could have as 3rd party mouse or keyboard.

    This is my generic how updates of appropriate driver:

    This utility, it is easy see which versions are loaded:

    -Free - DriverView utility displays the list of all device drivers currently loaded on your system. For
    each driver in the list, additional useful information is displayed: load address of the driver, description,.
    version, product name, company that created the driver and more.
    http://www.NirSoft.NET/utils/DriverView.html

    For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
    Control Panel - Device Manager - Display Adapter - note the brand and complete model of your
    video card - double - tab of the driver - write version information. Now click on UPdate Driver (this
    cannot do anything as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
    This will refresh the driver stack.

    Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with their
    own the software and drivers and all other main drivers that you have.

    Now go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration) and then of the manufacturer of the device
    (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for the BIOS, Chipset and software)
    updates on the site of the manufacturer of the system here.)

    Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after each installation.

    Always check in the Device Manager - tab drivers version you install actually shows up. This
    because some restore drivers before the most recent is installed (particularly that audio drivers) so install a
    pilot - reboot - check that it is installed and repeat if necessary.

    Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    How to install a device driver in Vista Device Manager
    http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

    If you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
    This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
    questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
    manually if you wish.

    How to disable automatic driver Installation in Windows Vista - drivers
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
    http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

    NOTE: Often restore audio drivers to check the version after installing and restarting is
    see if the version you have installed is there, otherwise repeat the installation - restart until it is. This may take
    several tests according to the recommitments how much he makes.

    Hope these helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • Satellite L30 10Y does not start with the new RAM modules

    Hello
    regged just with this forum I have a problem to upgrade memory.

    I read through a few problems of memory here and all users that it is a problem of memory comaptible. I got Hynix 512 MB RAM in my laptop and I bought 2 x 1 GB memory Hynix these two are match sticks to the installed memory, but when I installed my laptop wouldn't boot at all. It would only boot if I had a stick in both.

    I tried to switch ports top and btm and even when a stick was installed it says in XP, Vista and Windows 7 (yes I tried all systems) 896 MB of available space. I even tried to use my other Hynix stick, but he won't start and showed more stick of 1 GB (896 MB usable in Windows 7). After reading all the threads I wonder if it is a hardware failure or is there a fix in the world of Toshiba or perhaps in the world of Toshiba, the L series is almost obsolete and not worth to help people who unwittingly bought their goods.

    I apologize for being slightly down on Toshiba but a laptop that shows what he can work and is not a company should hold his hand up and say that Yes, there is a fault and help deal with the problem.

    You see 896 MB, because the rest is reserved for VRAM for graphics card.

    Sometimes RAM may simply be incompatible, because of incompatibilities of calendar or RAM chip/controller design differences.

    What speed and timings is your original RAM?
    PCxxxx / DDRxxx =
    Schedules CASES/RAS =.

    What speed and timings is your new RAM?
    PCxxxx / DDRxxx =
    Schedules CASES/RAS =.

    You can display this information using a utility called CPU - Z
    http://www.CPUID.com/cpuz.php

Maybe you are looking for