Satellite L30-114 - 2 GB of RAM does not work

Hello

When I put 2 Rams 1 GB each my computer do blue screen and restarts, but on one of this computer of Rams two work without problem.

A friend told me to update the chipset, the problem is that I can't find for this model of laptop

The chipset drivers, you can find the Toshiba site:
http://EU.computers.Toshiba-Europe.com
But to be honest, the chipset driver does not solve the problem.

Which RAM modules do you use? I think that the modules are not working together. Maybe they are from different manufacturers.
You must use with the same specifications and manufacturing same Rams.

Tags: Toshiba

Similar Questions

  • Satellite P10 - 554 dvd - ram does not work

    I got a Satellite P10 554, and as I said above the RAM does not work.
    It should be a software problem, because if I reinstall the drivers it works a few minutes (it did until now yesterday it stopped completely)
    It is impossible to install the new drivers or update a firmware somehow
    (pilot: after rebooting, the old drivers are loaded again (but I uninstalled them))
    (firmware update: I still got the message: invalid drive to update f/w)

    I hope that someone of you can help me ;)

    Hello

    What did you mean with the work of t car doesn?
    You are not able to burn or read the media?

    The error message says it all. I think you re not able to update the firmware because the firmware is not supported on this drive.

    Try to remove the drive from Device Manager, and then shut down the laptop.
    Usually after restarting again the operating system should recognize the drive again.
    If this does not help, you can try to remove the drive from the laptop. Turn on the unit, then go into windows. The reader should disappear. Then stop and reset the drive in the notebook. After this procedure the laptop must load the firmware again.

    It will be useful.

  • Satellite P200 - Product Recovery Disk 2/2 does not work

    Hello

    because my laptop (Satellite P200 - I bought in December 2007) does not work more properly - and when, after a lot of cleaning it still wasn't working properly - I decided to start from the beginning and restore the operating system with 2 product recovery cd / dvd.

    Recovery disk 1/2 worked well - Windows Vista Home Premium product is loaded again on my computer.

    But what abot * Disck2/2 product recovery? *
    At one point, the recovery program calls for a 'supplement' but when I put in the product recovery disc 2/2 at this time, that the program does not recognize the disc. During the rest of the recovery program the program didn't ask for Product Recovery Disk 2/2, so the content of this CD-ROM/dvd now is not loaded on my laptop.

    Someone had this problem too?
    What do you have on this?
    Is this a problem for not loading the content of the product recovery disc 2/2 (I can go without it?)?

    Thanks in advance for any response!

    Artisans

    Post edited by: craftsmen

    Hello

    > Products 1/2 worked well - Windows Vista Home Premium recovery disc is loaded again on my computer.

    I put t know which modules the tool called for, but AFAIK the Toshiba image contains the operating system Vista, Toshiba drivers and additional software.
    So if you've recovered the laptop using the recovery disk Toshiba 1 then the laptop must be set to the SAME State as at the first day of the purchase.

    PS: what files you can find on the second disk?

  • Satellite A30, Win XP Pro SP3 - modem does not work

    Another problem with this laptop Satellite A30
    The built-in modem does not work.

    * Explanation: *.
    The driver is correct and downloaded from the Toshiba support site.
    The modem is identified as "Toshiba software modem amr" and is installed on com3 port.

    When I click on "diagnosis" and "ask modem" (right labels can be different, since my is an Italian win xp, I just translated the Italian labels), a window pops up saying: it is impossible to open the door (port), the modem is connected to.

    I tried to change the com port of the modem to different numbers, but the problem is the same.
    I don't know if the modem is a real map connected somehow to the main Board or is built right on the main map. It would be the first case, I may change see ad. BTW, the mini slot pci is already occupied by the gigabyte of Wi - Fi, so the modem must be elsewhere.

    This is strange, since I've done at least 2 other win xp pro on this machine facilities, always download and install the appropriate drivers, and the modem has never worked.
    Thank you
    S.

    Hello

    Have you installed the SP3 Windows XP Home edition, then the drivers or SP1 and later updated to level to the SP3 version?
    > It's strange, because I did it at least 2 other facilities on this machine pro win xp
    What other facilities?

  • Satellite P50-A-144 - FN + z key does not work after update Win8.1

    Hello
    a couple of months ago with windows 8, which became 8.1 with w. update, I bought PC toshiba laptop SATELLITE P50-A-144.
    Since then, fn + z key does not work, it says that light keyboard turns off whenver I press it.

    How could I solve this problem? It's my OCD tingle.

    Thanks for all the replies :D

    Strange. Something like that shouldn't happen. I updated my machine, but everything works fine.

    I don't know if this will help, but try to reinstall the driver of Toshiba system and function key utility Toshiba.

    You should find it on the download page of Toshiba - http://www.toshiba.eu/innovation/download_drivers_bios.jsp
    Check it out.

  • Satellite P200 accidents + message: graphic card driver does not work properly

    Hello

    hope that this issue has not been covered before, but I've owned a Satellite P200 for 3 years now, and this week, it crashes all the time.

    When it started going down he gave me a few messages in the sense of "your graphics card/driver does not work properly and windows will be arrested to avoid damage.

    It has progressed to the point where now when I turn it on, I have vertical lines running down the screen and the screen flashes on and outside. Within 20 seconds, it restores the BSOD - 'there was a problem and windows will be arrested. Error Page_Fault_In_Non_Paged_Area"then stops.

    I ran a system restore but the problem remains.

    I have a feeling that my graphics card is toast. Is this good? Are there any other options to try? Thanks in advance for any answers.

    Matt

    Hello

    Sounds like the GPU problem.
    But try the graphics card driver update.
    Use the most recent driver for your graphics card.

    In addition, clean the fans of portable computers.
    Dust and debris could prevent the cooling fans to turn with the best speed and this could lead to a higher temperature which would lead to overheating.
    Use a jet of compressed air. I also use it and it helps to get rid of dust and debris.

    If this is not enough, then a problem of graphics chip would be possible.

  • Satellite L40 - 16 d and WXP - WLAN does not work

    After you install windows xp on my toshiba l40 - 16 d (psl48e) wifi does not work!

    maybey upgreate BIOS solve the problem?
    the problem is this model doesyn can't hawe no support on toshiba - I do not know I can download the new bios and soft to bios upgreate

    Anyone know?

    > bios maybey upgreate solve the problem?

    Update the BIOS?
    Why the BIOS updated so the WLan has worked properly with this version of BIOS before installing Win XP again?

    I think that you have not installed the right WLan driver.

    Satellite L40 - 16 d belongs to the series of PSL48.
    The drivers are available on the page of the Toshiba UE driver:
    http://www.Toshiba.EU/innovation/download_drivers_bios.jsp?
    Note: You must select Archive first Optional product Type

    In addition, you can choose WLan driver: Realtek RTL8187B because the cell phone was equipped with such a WLan module.

  • Satellite C50D - B - 11 X - touch pad does not work

    Hi I have a C50D - B - 11 X Satellite, I've upgraded to windows 10 and now the touch pad does not work, the cursor is located in the middle of the screen, can anyone help.

    Check if the touchpad would work after uninstalling the driver for touchpad of programs and features that you can find in the control panel...

    I'm not sure that the touchpad driver developer but the Synaptics touchpad driver or MOMENTUM... you may need to check this...

    After removing the touchpad driver, please restart the system.

  • Satellite C850-B635 and Win7 - card reader does not work

    My laptop came with windows 8 and the card reader was not working
    but I installed windows 7 64-bit, downloaded all the drivers on my laptop, but the card reader does not work now.

    I downloaded a driver called card reader controller, but it did not work as well
    I don't know if there is a problem or there is a driver should I install and I don't know.
    Please help me solve this problem.

    In my windows Device Manager, these devices is not recognized:
    * PCI simple communication controller
    * SM Bus controller
    * Unknown Device

    I tried searching in my page to download drivers on the Toshiba Web site but could not find these
    Please help me make my card reader works again.
    Concerning

    Post edited by: domaking

    For me, the matter is simple, and the reason why the SD card reader is not working, it's just a driver compatible isn't installed.
    My theory seems to be correct, given that the SM bus controller and PCI simple communication controller appear in Device Manager and I suppose that one of these devices belongs to the player/controller of the SD card.

    I think that you should simply install this Realtek card reader controller that I found on the page of the Toshiba UE driver
    http://Support1.toshiba-tro.de/Tedd-files2/0/CARC-20130924161048.zip

    In addition, you must install all the other drivers Win 7 as well as Toshiba tools available by Satellite C850 series.

    Very important is the chipset driver, USB 3.0 driver (Win 7 has this port driver to control the USB 3.0), display driver. etc.

    Not very essential tools are Bulletin Board, product information online Reeltime, etc. This tools additional don t improved the performance of the laptop so its up to you if you want to use these software components

  • Satellite M70 - 170 - Touch and the launch does not work

    Hello everyone, I'm Sylvain and I'm french, so sorry for my English...

    I have a Toshiba Satellite M70-170, and I have a problem with the program "Hit and run" (1,2,9,0)

    I see the icon then the clock and I can change the settings, but when I press the button of the mouse will work, but not to the touch and launch...

    Can you explain why?

    I love this commercial and I want to know why it does not work.

    I put t know why the touch & launch does not work, but I would try to reinstall again.
    The Touch & launch is placed on the European driver Toshiba page.
    This time it s a v 1.2.9.0 for Win XP.

    Uninstall first touch & launch and after restarting again install it again!

  • Key satellite L510-S401-touchpad FN and F9 does not work under win xp

    Toshiba user,

    I have recently purchase a toshiba Satellite L510-S401and I install windows xp
    and my problem does not have the FN key. I have install all the drivers that I think useful, but still does not work...

    If anyone has had a driver for Satellite L510-S401, that works with Windows XP, please contact me with the help of this thread.

    Yours sincerely.

    Hello

    It is not easy to help. I don't know in which country you bought this laptop and where to look for drivers.
    The fact is that the FN + F9 key combination works if utility to toggle the Touchpad is installed.
    Have you checked Toshiba support for this tool page?
    Which page you have downloaded all the drivers for Windows XP Home edition?

  • Satellite X 200-slot for flash card does not work

    Hi, I got a Toshiba Satellite X 200 23 P with Vista.
    my flash memory card slot does not work, I use an SD card that I've used a few months ago and it worked well.
    When I put the card, nothing happens.

    Help, please.
    Thank you

    You see the SD card in disk management?

    Do you have the yellow marks in Device Manager? Maybe you should also update the card reader driver. A newer version, you can find on the European site of Toshiba.

    In addition, you should test another SD card. The card is maybe defective.

  • Satellite Pro L10 - FN + F5 view command does not work

    When I attach my Satellite Pro to an external CRT, LCD monitor or projector, I get the same problem each end every time.

    the Fn + F key to toggle the display of control does not work.

    When I start the laptop with the attached external display device, everything is fine, and the display is exclusively channeled in the external display. but as soon as windows has started, the display switches to the screen of the laptop, and there is no way to make it back.

    y at - it an update for this problem, or another solution I know not?

    Thank you.

    Hello

    Seems to be a simple software problem.
    I put t know how long you OS runs on the laptop, but maybe some files registry entries are corrupted and therefore the FN key does not work as it should.

    Could help to reinstallation of the OS and the use of the recovery CD

  • Satellite Pro A60: TV S-VHS on does not work

    I have a Satellite Pro a60 and I'm pulling out my S-VHS to function... This does not work very well.

    I connected all the cables right and right click on the desktop, again choose preferences, then on Preferences, but I can't find anything on the transmission of the video signal.

    I have not though as the configuration standard of Toshiba, but that shouldn't matter. I'm running WinXP SE, but the drivers for my card ATI is about two years old and I can not find a suitable one anywhere, this is the problem, or should I program utility ATI?

    Best regards!

    Hello

    You should also check the TV settings. You must choose the right channel.
    As in the previous announcement suggested, you can change the display device using the FN + F9 key combination.
    If you want to play the DVD with the WinDVD player for example if you first need to change the output of the TV and then start the WinDVD.

  • Satellite L670 - after Win 8 upgrade WIFI does not work properly

    Afteer upgrade to Win 8, the WiFi of my Satellite L670-128 has stopped working properly.

    The connection only works some time, usually only a few seconds before the connection is lost.
    After a few seconds or minutes the connection is restored, just soon to be lost again.

    Cannot download large files or even to see larger photos on normal web pages. Is there any Win8 driver for Broadcom coming 802.11n network card, or should I throw one 2.5 year old computer in the trash?

    Buy a usb-wlan card is not an option, as wireless mice is already "permanently" reserving one of the three usb ports and wlan card it would be just to the left...

    To my knowledge this L670 series isn t Win 8 taken in charge and this means that there is no special Win 8 drivers for this device, so I put t think you will find an another Win 8 driver for this WLan card.

    But do you really want to throw this laptop in the trash just because the wifi does not work properly running Win 8?
    The device was working properly under Win 7?

    I would recommend running a few Wlan test.
    For example; Disable wireless encryption on your router and Wifi connectivity with the open network do that just for testing purposes, perhaps you will need to change the type of encryption to test.

Maybe you are looking for

  • Hide the bookmark on the Navigation bar button

    The Bookmarks button has disappeared from the Navigation toolbar from a recent update of FF. As if by magic, it reappears when I select "toolbars" but disappears when I click on 'Done '. All the others are very good! I dragged to different and even "

  • Cannot use command line commands.

    I am trying to install a router on my computer.  I make all the connections and then try to configure the router. To do this, I need to go to the shell.  I have to start > RUN > cmp.  The shell comes up enter the following: C:\>ping 192.168.1.1 the f

  • Windows XP - double click does not work on the desktop icons

    Hi all I have a really strange and weird problem! My brother-in-law put me back is equipped with all the malware as possible you can imagine... Virus, Trojan, Adware, Rootkit horse... etc. A collection of all the wicked thing you can collect on the w

  • com surragate not working___

    Remember - this is a public forum so never post private information such as numbers of mail or telephone! Ideas: You have problems with programs Error messages Recent changes to your computer What you have already tried to solve the problem

  • Is there a way to allow to be saved on the name of the PDF (replaced) after the document has been saved at once?

    Once a person has saved a fillable PDF on their computer and entered information, close the document, and then reopen to add more information, they get an error to tell Adobe Reader, "the document could not be saved.  Unable to save this file name.