Satellite L30-115: does not start when external keyboard and mouse are connected

My Satellite L30-115 starts when my external keyboard and mouse are connected to PS2 USB adapter.

Everything is OK, when they are not connected, and they work fine when they are connected after boot.

Someone has any idea how to solve this problem?

Hello

I don't think there is a way to solve this problem. Also, I assume it is the related issue of the BIOS. Is perhaps the time to be up-to-date and use new and compatible equipment. ;)

Tags: Toshiba

Similar Questions

  • PC runs, but does not start. Monitor, keyboard and mouse with no signal.

    PC runs, but does not start. Monitor, keyboard and mouse with no signal. Pretty much. And when you want me to remove the battery of the bios, or whatever, it seems tight and hard to get out because it is surrounded by other elements.

    All fans work, the power/battery or anything that works I think that, since there is a fan on the right where it is and it seems to work. I remember what happens before, I don't know, but before that, there are many gels. This error below was made before all this happened, but I managed to run f8 and then run normally until it freezes again. Then, after that, it runs but does not start. No beeps etc. The best fans will have plenty of vouches and Bravo to wherever you like me to vouch or maybe send the great service that you provide to administrators if that's even possible, haha.

    Thanks in advance.

    "

    The file is possibly corrupted. The file header checksum does not match the checksum calculated. »

    It is a sign of a lack of food.  Looks like you have a desktop computer?

    Power supplies run about $50.  It is a rectangular box at the corner of the system in which the power supply will from the outside.  It's a pretty standard form in most of the PC and with a little investigation thorough replacements can be found.

    It is usually held in place by 4 screws and can be held in place with a spring clip.

    Most essential, is that you need to buy a replacement with the right number of straight plug forms to adapt to your PC.

    This seems more complicated than it really is and takes about 5 to 10 minutes to do the replacement.

    Look at the power output of the power supply failure and buy a new, more powerful.  New desktop PC usually come usually with a diet under size and what are the causes these failures is too strong a request for devices you have connected.  So, buy one with a higher power rating.  Usually about 500 Watts does the trick.

    If you do not feel upwards to this task, a technician should not charge you much like this.

  • Satellite A660-186 does not start when the USB nano-receiver is connected

    Recently I bought a mouse a4tech g7-750 with the nano-receiver into usb port plug.
    After the nano-receiver is inserted into the USB before lighting, computer laptop does not start.

    Only the cursor is displayed, so that it is displayed before the screen with the ability to enter the F2 BIOS or select the F12 boot device.
    Without the nano-receiver laptop runs without problem.

    Any advice?

    Thank you much in advance.

    Hello

    During the POST (power on self-test) all parts laptop as RAM, motherboard (also of connected devices) is enabled.
    If a problem (compatibility problems, etc.) would be detected during POST, then the laptop would not initialize correctly.

    This mouse nano-receiver is unknown to me and I m not very well what s wrong with this unit, but I doubt that this problem is related to the laptop.
    I guess that the laptop starts properly with other devices connected to the laptop. right? Well well, in such cases, there s no question cell phone but the 3rd unit affect the functionality of the laptop.

  • Why Satellite Pro A300 does not start when you press the power button?

    Suddenly my new Satellite Pro A300 does not start correctly when you press the power button. The situation is the following: when I press the power button is displayed the opening of Toshiba (Leading Innovation) and the disappers image quickly. Then there is a black screen for about 30 seconds. There is a rectangular frame with the text Microsoft Corporation under. And nothing happens however long wait.

    In order to get with the trial starting I then shut down the computer by pressing the power button until the computer turns off. ("The hard way to close")
    Now, I press the power button shortly to turn on the computer. Then, the computer starts normally with the photo to open Toshiba and after a few seconds, I wonder to open the computer in safe mode or in normal mode. I now choose to open in normal mode and the computer opens normally and is ready to work.

    What should I do to get a normal departure procedure?

    When the laptop starts normally (after choosing normal mode) stop your laptop properly using START > shut down option. Next launch should be normal.

    When the OS is moving towards the low irregularly will always ask you how to start this new (secure or normal mode).
    The same thing happen on my Satellite A300.

  • Windows 10 does not recognize the wired keyboard and mouse

    When I start windows 10 technical preview my mouse and keyboard do not work.

    they are recognized when I'm in the bios, but when it does start nothing

    keyboard and mouse wired usb

    This is the forum for Windows 7.

  • Satellite L30 - 10y does not start - BSOD

    I have a laptop Toshiba Satellite L30 - 10y.
    The problem is that the laptop does not start.
    I turn on the computer and the screen turns white and bottom screen then comes up for a fraction of a second that says...

    "stop: c0000218 {Registry file failure}".
    The registry cannot load the hive (file):
    \Systemroot \System32 \Config \DEFAULT
    or its log or alternation.
    It is damaged, missing, or not accessible writing. "

    I was wondering if anyonecould help me, let me know what this means and what I can do...

    Thank you very much

    Adam

    Hello Adam

    Here two interesting documents of Microsoft, but I really don't think that it will help you
    http://support.Microsoft.com/kb/307545/en-us
    http://support.Microsoft.com/kb/830084/en-us

    Maybe the best solution for you is to use recovery media supplied and install OS again. After that it all will again be OK.

  • Satellite L30-101 does not start

    Hello

    I have starting problem with my laptop.
    After working, when I put the lid, system will stand by as it should.
    When I leave it like that for quite a long time (over an hour) and I open the lid and press the power button all the lights go down and it does not start.

    No matter how many times I try it remains dead. I have tried everything that disconnect pluging the battery and adapter, nothing happens.

    Help, please!

    Usually when you want to reuse for laptop you simply open the lid and laptop should be awake alone.
    What happens when you just open the lid?
    Does button walk / stop still flashes and portable rest in sleep mode?

  • Satellite L30 10Y does not start with the new RAM modules

    Hello
    regged just with this forum I have a problem to upgrade memory.

    I read through a few problems of memory here and all users that it is a problem of memory comaptible. I got Hynix 512 MB RAM in my laptop and I bought 2 x 1 GB memory Hynix these two are match sticks to the installed memory, but when I installed my laptop wouldn't boot at all. It would only boot if I had a stick in both.

    I tried to switch ports top and btm and even when a stick was installed it says in XP, Vista and Windows 7 (yes I tried all systems) 896 MB of available space. I even tried to use my other Hynix stick, but he won't start and showed more stick of 1 GB (896 MB usable in Windows 7). After reading all the threads I wonder if it is a hardware failure or is there a fix in the world of Toshiba or perhaps in the world of Toshiba, the L series is almost obsolete and not worth to help people who unwittingly bought their goods.

    I apologize for being slightly down on Toshiba but a laptop that shows what he can work and is not a company should hold his hand up and say that Yes, there is a fault and help deal with the problem.

    You see 896 MB, because the rest is reserved for VRAM for graphics card.

    Sometimes RAM may simply be incompatible, because of incompatibilities of calendar or RAM chip/controller design differences.

    What speed and timings is your original RAM?
    PCxxxx / DDRxxx =
    Schedules CASES/RAS =.

    What speed and timings is your new RAM?
    PCxxxx / DDRxxx =
    Schedules CASES/RAS =.

    You can display this information using a utility called CPU - Z
    http://www.CPUID.com/cpuz.php

  • Satellite L30-149 - does not start with the new RAM modules

    I bought RAM Kingston 2 x 1 GB modules. When I put a single module in my notebook - everything works fine. When I put the two modules - BIOS freezes and cannot start.

    I tried to combine my old module of 512 MB with 1 GB of Kingston, but in this case laptop detects only more great module (Kingston). So, I'm stuck with only 1 GB of RAM. In my notebook BIOS version is 3.10, and it's the last. I tested RAM modules in a laptop and each of them works fine.

    What should I do now? Help, please!

    Download and run www.memtest.org Memtest to test these Modules one by one.

  • Satellite C650 - Windows does not start correctly

    I have a Satellite C650, who does not start, when it lights there are two options, Startup Repair launch which leads to a black screen and mobile arrow, the screen remains like that until you turn it off the button stop (seriously ive left for about 10 hours). The other option is to start windows normally resulting in a blue screen and the laptop restarts itself.

    Help me please, make things worse I can't find the box that it came in which contains the guarantee and recovery disc

    Hey Buddy,

    You can start your laptop in safe mode? This means that if you press the F8 key before Windows starts and you choose Safe mode can you start Windows?

    If this isn't the case I think that it s something wrong with your Windows installation and that's why you need to use the Toshiba Recovery disk to restore to factory settings.

  • Satellite A200-1BJ does not start

    Hello

    My Satellite A200-1BJ does not start. After turning on the button it starts only for 1 or 2 seconds (flashing light, work from HDD, fan work, display blank) and then it turns off automatically. Once it happened days before but I didn't have the time to solve it and over the next few days, he has not occurred. Now, I tried to launch it more than 20 times and it still won't start.

    I tried only with full battery and also only with the power adapter. I removed the HDD, RAM, keyboard, DVD, speakers, display and a few other connector under the keyboard and it still does not start and it shuts down after 1-2 seconds each time.

    In recent months he sometimes exploded due to overheating during work so I cleaned the dust inside.

    No problem with the motherboard or power?

    Thanks for help.

    Hmmm... on this virtual path, it is not easy to say what the problem is. described behavior is the same as in cases when the BIOS is dead after failed BIOS update installation.

    Of course, it's mainboard problem but what exactly, it is not easy to say. For me, this looks like faulty BIOS.

    Have you installed any updates or anything that may be responsible for this?

  • Satellite P100 PSPA3A does not start

    My son P100 (model no PSPA3A - 17E00P) does not start when you press the START key. I tried to start with and without the battery, but all that happens is the operation turns upward (as do the lights of Harmon/Kardon speakers) for a second, but no fans, disks or such beginning at the same time. THE HARD drive light is not going on either.

    Clues?

    This could be due to many things.

    Try reinstalling the RAM or different combinations of RAM.
    Then remove the battery and AC power for a few minutes and plug it back in that hide them.
    If all else fails, it may be a faulty motherboard or video card or cpu.

  • Satellite P200-143 does not start

    My Satellite P200-143 does not start. The led lights up and the drive light flashes once then nothing. Holding the buttome 'on' for 10 second light outside.

    I tried to take out the battery for the afternoon, but no effect

    Any suggestions?

    P

    It looks like a dead last.
    The P200 is a new series and I think that the guarantee is valid. Then contact the ASP in your country and ask for help.

    Good luck

  • AiOSoftwareNPI (* .ms) the Setup program does not start when I start my computer.

    original title: AiOSoftwareNPI

    I'm having a problem with a software AiOSoftwareNPI problem (* .ms) the Setup program does not start when I start my computer.

    I know it's a Windows Installer but I don't have a disc with this route. I even tried to reinstall the windows xp disk and it does not work, I still

    get the same box when I shutdown and restart. The box allows me not to leave him continues to appear.

    Thank you

    Ms. C

    After doing a Google search for AiOSoftwareNPI and followed by the reading of many different threads in various forums, I found that it is for drivers for an HP all-in-One printer.

    You have an HP printer?

    If so, the usual suggestion was to place your HP printer disk in your CD/DVD drive and restart. After reboot would be installed the necessary files and the pop - up would more appear at startup. I don't know if it will actually work because in all the discussions I've read, none of the original poster never responded by saying that it worked or not.

    The next most common suggest was to download the latest driver for your HP printer to your version of Windows (including at the level of the ILO) and install it. Yet, not a single original poster has responded.

    In fact, if you have an HP printer I suggest to visit the web site of HP support below the link to get the latest drivers and their installation. Visit the support for the correct installation method and if you need to remove the old driver first. You can also visit the communities of Support HP for assistance (a link for communities is also on the next page).

    Support HP & drivers
     http://WWW8.HP.com/us/en/support-drivers.html

    Kind regards

  • Msconfig does not start when typed into the starting box?

    Msconfig does not start when typed into the starting box?

    Original title: windows

    What is the listed program in 'C:\Windows\System32' if you look in Windows Explorer?

    If this is the case, it starts if you click on it?

    Update your anti-virus software and run a full scan.

    Then download, install, update and run a full scan with malwarebytesfree. (Keep free, no need to enter in any trial etc.).

    Then run a sfc/scannow to see what that brings.

Maybe you are looking for

  • How to select multiple duplicates to remove

    I show multiple copies of the same songs in my itunes. It is probably because I have a few external drives with backups attached to my main PC. I want to store the Itunes library, and I know how to remove the duplicates, but can do for simple songs.

  • Mouse and keyboard no longer work after fixing drive dvd - Satellite A100-147

    My DVD Player wasn't working, so I fixed it with the help of some advice from a forum: go to regedit to remove the 'previous' and 'high' or something, I have a catalog specified. But then the keyboard and the touchpad is dead in Windows. Nor can I us

  • Atheros driver missing on Satellite Pro L40

    I was using my laptop to access the web when the wireless went off all of a sudden.When I tried to re - connect it says that my wireless lan was disabled.So I went into Device Manager to see the Atheros wireless driver is not listed anymore. I find t

  • 6210XS SQL Performance Benchmarking

    Our company has recently acquired some new berries for a new ERP system. I am the senior analyst programmer on the project and I'm a beginner-intermediate level on the SAN storage, virtualization and optimization of the performance of SQL. I need to

  • Watch Q10 Q10 AT & T blackBerry connects to the PC

    We have just received our Q10 demo today.  One of my representatives decided to not use it so we did a cleaning of the device.  Now, sitting in front of a screen that says connect to PC. Tried to do all the steps to reload the OS but no luck, says th