Satellite L30-134 does not access BIOS after upgrade with SSD

Hello

I have a problem with my old Toshiba L30-134.

When I try to replace the old with new SSD HARD drive, I can't start BIOS.
But when I remove the DVD-ROM laptop and leave there only SSD, then BIOS can start and I see the drive detected. DVD - ROM has PATA/IDE interface.

I also tried IDE adapter SATA (like this: [adapter | http://goo.gl/W3TpXt]) for replacement of the DVD-ROM with second SATA HDD and I had the same problem when the disk was present in the adapter.

When the second HARD drive was not present in the adapter, BIOS began. And it's not just about BIOS.

Computer is blocking on startup TOSHIBA logo screen during the hardware detection and there is also no error message.

I can't change the settings on the device SATA IDE/AHCI mode. Is there a workaround with riders or a software solution?

Thanks for help

Hello

> When the second HARD drive was not present in the adapter, BIOS has begun. And it's not just about BIOS.

You replaced the STRANGE with a HARD drive?
It won't work buddy. The s laptop computer's optical disc drive supports IDE controller. The HARD drive seems to support the SATA controller.

The laptop does not power upward because the POST (power on self-test) cannot be passed correctly. During POST the laptop s material will be checked for a possible malfunction or compatibility issues. In your case, the hardware is NOT compatible and that you can't change that.

Tags: Toshiba

Similar Questions

  • Satellite L30-101 does not turn ON after Vista update

    OK well my laptop has played lately and I have installed the new update of Windows Vista.
    Now my laptop didn't boot.
    It just won't turn on. I tried everything and its not working everything simply do not.

    Whats gone wrong turned with her and is anyway I can fix it?

    Hello

    Do you mean the laptop does not illuminate or only the Vista operating system does not start?

    You see the home screen Toshiba appearing at the beginning?

    Feedback would be appreciated

  • Satellite L30-134 does support dual channel DDR2 memory

    Does anyone know Satellite L30 does support two mode because I've got 2x256MB and a 512 MB all Micron MT modules?

    Wojtek cordially

    Hello

    Of course, the Satellite L30-134 supports DDR2 memory modules.
    I found a few listed on the Option & Accessories site of Toshiba Europe site:

    What are supported:
    DDR2 400/533 256 MB (PA3389U - 1 M 25)
    512 MB DDR2-400/533 (PA3412U - 1 M 51)
    1 GB OF DDR2 400/533 (PA3411U-1M1G)

  • Satellite L30-134 will not accept 2 GB of RAM

    I looked at my laptop and it takes a maximum of 2 GB of DDR2 RAM, I tried two different pairs of sticks of 1 GB and the two blue screen that loads the OS.

    When the sticks do not go it simply ignores the second run, but I can't seem to accept 2 GB.

    BTW I have upgraded to a core duo processor, don't give me no problem.

    Known fixes for this problem?

    Hello

    Your laptop can be upgraded up to 2 GB of RAM. That s is definitely possible!
    You can use 2 modules of memory vivid x1024MB.

    If you would taka glance at this page, you will find information that you must use the DDR2 533 MHz (PC2-4200) 200 - PIN SODIMM modules.

    [Memory for Toshiba Satellite L30-134 | http://www.orcalogi.co.uk/asp/prodtype.asp?prodtype=25737&ft=m&st=3]

    I presume that you always get a BSPD because the RAM modules are not fully consistent or simply malfunctioned.

    Welcome them

  • After downgrading from Vista Satellite L30-101 does not read DVD

    Hey,.

    Like many people, I didn't like Vista and so returned to the use of Windows XP.

    In doing so, I lost a lot of things like the ability to watch DVDs and sound, most of these problems fixed so easily by downloading the drivers from this site.

    However, even after the DVD driver download I can't read DVDs yet.
    When you try to play through Windows media player I get say error message that I did not have a MPEG-2 decoder, in the section web site help, it suggests where to get one, but you have to play for each other.
    After having one in the first place, I don't think I should buy a new one.

    If anyone has a solution it would be greatly appretiated if they could let me know.

    Thank you

    PS I have a Satellite L30-101

    I think you have a codec problem, but I'm not sure. Maybe you should install the latest version of Media Player and codec Xvid, DivX and AC3. These are free (google it!). Or you can try alternative software, such as WinDVD or PowerDVD, you can try the demo versions.

  • Satellite L30-PSL33 does not illuminate after hibernation

    Hello

    as I said in my previous post, I also have a problem with the Hibernate. The thing is that when I leave to transform a hibernation on this more later sometimes not loading Windows - the load bar coming to an end and then it stops 'thought' so I have to stop it and start it...

    The operating system is Win Xp Pro SP2 on Toshiba Satellite L30-PSL33. For example, it loads Windows hibernation 2 or 3 times, and then after that it will not load the operating system.

    Please give me an advice how to fix this...

    Thank you

    It's not easy to say what s may be wrong because like you say so this problem happens sometimes and that's why he of not easy to reproduce this error.

    I m an owner of a Sat L30. I use Vista on my L30 and received no similar problem.
    I talked to some people, and also read on some sites Internet computer that this error could be related software.
    One question; what OS came preinstalled on this notebook; XP or Vista?

    Maybe you have updated the operating system on your laptop to the last State.
    Please also check if the third-party programs 3rd n t assigned the wrong operating system.

  • Satellite A210-199 does not start successfully after the BIOS update

    Hello

    I've got Sat A210-199.
    Yesterday I updated the BIOS, and after that problems occurred:

    While restarting my computer does not start. When I enter the BIOS after a while, it shuts down.
    I guess all this because the temperature of the CPU:

    When I do nothing it is 77 C. I don't think it's normal: (.)
    Computer is very recent, so it's probably not dust inside. And it's so hot from the start, but after the new BIOS, something bad happens.

    Why this temp is so high?
    There is no any process background or something.
    Is this normal?
    And what about this new BIOS?

    To be honest, something like this should not happen. I really don't understand why this is happening. I have updated the BIOS on friends A200 and mine P200 and everything works fine. Here on this forum we can only speculate on this issue, but what you need exactly's professional opinion.

    This probably not help but install recovery image and check with the factory settings. Make sure you also on the lower side cooling fan is not blocked and the laptop can be cooled properly. If the problem persists, you should contact the nearest authorized maintainer and clarify this issue.

    Sorry, but I don't really know what you can do in this situation. I don't see any other way to solve this problem.

    Good luck!

  • Satellite L30-105 does not recognize the 1 GB of additional RAM

    Hi there I hope someone can help me

    I have a Satellite L30-105 PSL33E, which came with 1 GB of ram installed (2 x 512 MB made by TeamViewer)
    and it's terribly slow with vista, not to mention programs.
    The toshiba website says max RAM is 2 GB, so I bought a Kingston 1 GB ram chip to increase the ram to 1.5 GB. I thought should try before moving to 2 GB

    However after installing memory vivid it's show still only 1 GB in windows and in the bios (894 + the rest for video). It has the latest available BIOS on the site 3.10, yet still does not recognize the chip.

    The chip is installed in the lower slot, including the original 512 at the top (closest to the keyboard)

    Are limited to only some of the Satellite of RAM?
    The old subjects indicate if kingston does not work try corsair.
    Other topics suggested to change slots
    Others suggest that it may have only two of the same ram chips in IE 2 x 512 or 2 x 1 GB, you may not have 1 of each

    Can anyone help? everyone knows about similar problems?

    I will not buy any more RAM to try different brands for the same issue to occur

    Hello

    The L30-105 is able to manage the 1024Mo modules in each location it should be able to update the RAM up to 2 GB.

    > Why the RAM 1 GB module cannot be recognized?
    Perhaps the two modules are not compatible with each other
    I would recommend using two identical modules of the same manufacturing
    I use Kingston modules, they are ok for me

  • Satellite L670D - 15 d does not start successfully after upgrading RAM

    Hello

    I have a Satellite L670D - 15 d and now I've passed on SSD.
    In this context, I wanted to increase the RAM (2 GB DDR3-1066 original installed).

    I bought the Mushkin 8 GB kit DDR3-1066.
    In the BIOS are displayed both modules of 8 GB RAM.

    After the logo screen, the white course remains the top left corner and the boot process stops.

    Does someone has an idea and can help me?

    The questions is related to the new RAM inserted.
    But I m confused what RAM is installed exactly now; Modules of RAM of 2 GB + 8 GB or a single module of RAM to 8 GB?

    I m request because the laptop Satellite L670D - 15 d supports 8 GB of RAM, and from my point of view of some 10 GB of RAM (2 GB + 8 GB) is too much.

    That's why I recommend you to use 2 x 4 GB RAM modules.
    Kingston modules provide good quality value ration. Modules are not the cheapest, but in most cases, these modules don cause compatibility issues t. You know

  • Satellite L30-115: does not start when external keyboard and mouse are connected

    My Satellite L30-115 starts when my external keyboard and mouse are connected to PS2 USB adapter.

    Everything is OK, when they are not connected, and they work fine when they are connected after boot.

    Someone has any idea how to solve this problem?

    Hello

    I don't think there is a way to solve this problem. Also, I assume it is the related issue of the BIOS. Is perhaps the time to be up-to-date and use new and compatible equipment. ;)

  • Satellite L30 - 10y does not start - BSOD

    I have a laptop Toshiba Satellite L30 - 10y.
    The problem is that the laptop does not start.
    I turn on the computer and the screen turns white and bottom screen then comes up for a fraction of a second that says...

    "stop: c0000218 {Registry file failure}".
    The registry cannot load the hive (file):
    \Systemroot \System32 \Config \DEFAULT
    or its log or alternation.
    It is damaged, missing, or not accessible writing. "

    I was wondering if anyonecould help me, let me know what this means and what I can do...

    Thank you very much

    Adam

    Hello Adam

    Here two interesting documents of Microsoft, but I really don't think that it will help you
    http://support.Microsoft.com/kb/307545/en-us
    http://support.Microsoft.com/kb/830084/en-us

    Maybe the best solution for you is to use recovery media supplied and install OS again. After that it all will again be OK.

  • Satellite L30 (PSL33E) does not recognize second memory slot

    I'm trying to upgrade a L30 for a friend. It came with 1 memory module 512 MB PC2 - 4200. I tried to add a 1 GB PC2-5300 SODIMM in the second housing and it does not pick it up. I replaced the 512 with the 1 GB and he found. Put the 512 in the second slot, still sees the 1 GB but not the 512. I tried 2 x 1 GB and he sees one of them. It reports 894MB as I guess he uses 128 MB of video memory.

    I've updated the BIOS, checked all the settings and I don't see why it woun't recognize the second memory location.

    Any ideas?

    Hello

    The second location is defective. It's the only plausible explanation

    But as far as I know Toshiba recommends the use of these modules;
    512 MB DDR2-400/533 (PA3412U - 1 M 51)
    1 GB OF DDR2 400/533 (PA3411U-1M1G)

    Maybe you should test notebook with such 1 GB module to make sure this isn't a problem of compatibility of memory.

  • Satellite M30-107 does not start successfully after using recovery disk

    Hello

    I recently got my hands on a toshiba Satellite M30-107 laptop second hand and decided to freshen it.
    I used the toshiba recovery disk, but after that the laptop is no longer support windows.

    When turned on it shows booting Toshiba disc for about a second then goes to a screen blank and freezes.
    When turned on, once again, a screen will appear an error by stopping and offer the opportunity to start in SafeMode etc but choose one of the options causes the machine to freeze.

    Any help or advice would be much appreciated.

    Thank you
    JT

    Hello

    Sounds a little like the laptop does not start because of the problem of Windows software
    You did not recover the M30 with the original Toshiba that was provided with this device M30 recovery CD?

    I may be wrong, but to me it looks like a recovery CD incorrect has been used and an image with drivers not compatible m has been installed

    You can try to install the OS of Microsoft Win XP original CD and could check if it would be possible to get the notebook ruin using own BONE.

    In this case we (you and me ;)) might know if this problem could be related to hardware or software.

    Good bye

  • Satellite L30-113 does not recognize the two modules DIMM RAM

    Hello

    I have a Toshiba laptop Satellite L30 113.
    It has 512 MB of RAM and therefore struggled to run Windows Vista, so I bought another 1 GB of RAM.
    It's DDR2 553 MHZ (PC4200.

    The problem I have is that the laptop does not recognize both DIMMs, i.e. the old 512 MB and the new 1 GB when they are in the whole PC. I tried the two DIMM individually in both slots and there is no problem, but when I install both the system sees just 1 GB. I tried the DIMMs around two ways but without success.

    Did I miss something?
    They should be the same size as in the bad old days?
    What is going on?

    Thank you

    Adam

    > I tried the two DIMM individually in both slots and there is no problem, but when I install both the system sees just 1 GB
    Seems that the two RAM modules are not completely compatible...
    I've read several times on these issues and to be honest it s are not uncommon

    I advise you to buy two identical RAM modules ad then to try again

    I'm afraid there is no other solution for your problem of m.

  • Satellite L30 - battery does not charge

    I have a Satellite L30 and the battery does not seem to charge.

    The battery keeps flickering light with yellow outside. I can use the laptop when I am connected but when if I'm moving to much the battery seems to lose the connection to the AC adapter.

    I don't know if it's the battery or something else.
    Can anyone help?

    Please, remove the battery and use laptop with AC adapter only. I imagine that you will be able to use your laptop properly. When the laptop is ON put the battery back in place and let us know if the battery led will continue to Flash.

    If Yes, I'm pretty sure the battery is dead and you need a new.

Maybe you are looking for