Satellite L30-134 PSL33E: CD/DVD player can't read data CD

Similar Questions

• CD DVD player: can not read data DVD discs that burned same machine

  Laptop with Windows Vista cannot read data DVD discs that burned same machine.  The discs work on another computer.  My laptop will read CD disks, he did, and it will play DVD movies. What's wrong?

  Hello

  You have disk problems as the CD/DVD is actually 4 discs in 1 case (CD &)
  Burn DVDs and CDs and read DVDs). So it is not unusual for 1 or 2 parts to no function
  while others are doing so correctly.

  Burning at low speed, or by using the master could help. A CD/DVD cleaner
  could help.

  Brand of the CD or DVD drive can also be the problem. Low quality (cheap brands) are always
  issue.

  CD/DVDs have a tolerance + - and your can read/write on the outside edge
  tolerances of the disks. They may be delivered, but it is usually cheaper to replace
  the reader.

  Several good info here:
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Notes on the troubleshooting and repair of readers of compact disks and CD-ROM Drives
  http://www.repairfaq.org/repair/F_cdfaq7.html#CDFAQ_014

  ===========================================

  This troubleshooting might not help if there are problems of alignment and wear it
  is worth it.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then check the cables
  both ends. Remove and replace, do not just tight. For laptops, you can often clean the
  power and data of the contacts with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the system manufacturer
  and the manufacturer of the device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD &)
  Burn DVDs and CDs and read DVDs). So it is not unusual for 1 or 2 operational parts while
  others do it properly.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Satellite L30-113 PSL33E: CD/DVD player not Burning not.

  Hi, for some strange reason my CD/DVD drive will not burn files to CDR discs. I tried burning data and music, but without success. It was working before but now will not work. I have no idea if this is due to updates or if the player is running out.

  It will burn the data/music etc. on the disc, but then it will fail.

  I would be grateful if someone could help me to find a solution to this problem, as I am a student and I really need to be able to burn files to disc.

  Thank you.

  Try the following steps:

  -Remove the drive from Device Manager
  -restart the laptop
  -the OS should reinstall the drive
  -go into the registry and delete the Upperfilters and Lowerfilters completely from the following registry key values:
  * HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contr ol\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318} *.

  - then reboot again and test the drive

• Compatible drive for Satellite L30-134 (PSL33E-00E00WRU)

  Please indicate internal what HARD drive I should buy for my laptop Satellite L30-134 (PSL33E-00E00WRU)?

  Hello

  I found a similar thread here:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=51895

  As you can read you can install each 2.5 HARD drive with SATA interface. It is no problem and you don't need a certain brand. Just buy this model you prefer ;)

• Re: Satellite L30 - 134 PSL33e shows 896 MB of RAM, but 1.5 GB are inserted

  Satellite L30 - 134 psl33e-00e013g3.
  I have 2 memory slots, in the first place there are 1 GB kvr, then I add to the second slot 512 MB Hynix
  All of the memory two modules are ddr-533 (little difference in hours between them is present)

  If I click on my windows computer properties shows me only 896?
  On the official form of toshiba. subject memory says I can go to 2 GB of ram.
  BIOS is the latest version!

  How can I add more ram in this model?
  Aida64 shows me in the slot1 = kingston 1 GB
  SLOT2 = 512 hynix
  but aida shows that the memory system 896.
  All modules in memory works great separately in all slots...

  Thank you

  Post edited by: workman24

  Hello

  That says the BIOS?
  BIOS sees the 1.5 GB of RAM?

  As far as I know that the laptop can be upgraded up to 2 GB of RAM (2 x 1 GB)
  The ATI graphics chip also shared memory.
  This means that if you installed 2 GB of RAM, a main part of this memory would be shared by GPU.

  It would be interesting to know what value would be reported by system using a single module (1 GB or 512 MB)

  by the way: what memory is shown in DXDIAG?

• Satellite L30-134 PSL33E sound card driver does not

  There is no setup.exe for the sound card in the download?
  and it will not install manually with the inf file

  can someone point out the correct link for the drivers for sound card for this laptop

  Satellite L30-134 PSL33E

  Have you tried C:\Toolscd in the RealTek folder? I removed, because it takes too much space, and when I had the problem with the driver (I also Satellite L30-134), I downloaded from:

  http://support.toshiba-tro.de/tools/satellite/sl30psl33/XP/sound-PSL33-XP-51005273.zip

• Satellite L350 - DVD player can't read DVD

  Hello

  I have a problem with my "Mat * un UJ880AS' DVD Ram drive in Toshiba Satellite L350!
  I tested 2 DVDs on Windows Vista, but the reader can´t read these! What can I do?

  Has your laptop factory settings (always original preinstalled as for the first day)?
  What type of DVD used for testing?

  To be more specific and explain what you did exactly, what kind of DVD that you used and what DVD player you use for the test.

• Re: Satellite C660-125 DVD player can't read DVD

  Hi guys

  I have a C660-125 and its developed a problem with the DVD player. It can read CDs and burn fine CD, but it won't read or burn DVDs at all.

  I used a laser cleaner, I also googled firmware but can't find anything for her.

  Any ideas what is wrong with it?

  The model is TS-L633

  > I used a laser cleaner, I also googled firmware but can't find anything for her.

  I cleaned my alcohol BIZARRE or cotton tip laser lens and it worked like a charm. In your case worth a try too.

  In addition if an ODD firmware would be available, then you should find it on the European driver Toshiba page.
  I checked, but did not find a firmware for TS-L633 means that this firmware update is not necessary.

  But I found this Toshiba document:
  _ODD firmware update to solve problems with the Toshiba creator_ recovery CD
  http://APS2.toshiba-tro.de/KB0/TSB9C02RP0000R01.htm

  But beware: the document contains files different firmware for TS-L633 on different sides. If your ODD is not on the list, don t try update firmware for your ODD would harm to the use of the firmware is not compatible!

• Satellite U300 - DVD player can't read DVD

  I got my U300 for about a year and a half, and now the DVD player has stopped working properly.

  I can play DVDs without problem, but I am unable to read CDs or disks of software. When I double click on DVD - RW on my computer, a message appears telling me to insert a disk in drive D, when it is already there!

  Anyone know what is the problem and how can I solve this problem? Any help is very appreciated! Thank you!

  Hello

  You can try the steps to follow

  -Try to remove upper and lower filters. If you n t know how, read this Microsoft KB article:
  http://support.Microsoft.com/kb/314060

  -Remove the drive from Device Manager CD/DVD, and then restart the laptop. After the reboot of the CD/DVD drive will be recognized again. Maybe it works.

  -Perhaps there is dust on the lens. You should try to clean the lens of the CD/DVD drive.

  In the worst cases, the CD/DVD drive must be replaced :(

  Good bye

• Equium - Toshiba DVD Player can't read DVD

  When I insert a DVD into my internal DVD Toshiba Island DVD player application starts but then displays this error message: -.

  + * Unable to output the video to an external device. Please change your device display by pressing Fn + F5 keys after the end of the application * +.

  I press Fn + F5 keys according to the directives and the drop-down list display Fn shows the symbol of the laptop before retreating off the screen. But still the DVD returns the same message and will not play. I find myself with Windows Media Player to play the DVD.

  What is going on?? What I am doing wrong?

  I'm new to the forum please excuse if this is a repeated question.  :-(

  What satellite notebook do you have?
  What operating system do you use?

  Try to update the DVD player that you can find on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Use an external monitor?

• DVD PLAYER CAN'T READ DVD MEDIA IN THE STUDIO HYBRID DESKTOP

  You will appreciate the help a lot about this question. I have the desktop studio hybrid 140G. For the past few weeks the cd/dvd drive rom played inconsistent dvd media files. But since last week it has completely stopped playing DVD media. Although it opens the audio cd and dvd software installation files. I updated the dvd player but the problem persists. On the control panel if I check the current status of the dvd player, it shows - works correctly. I am running windows vista and the cd/dvd rom drive is TSSTcorp DVD +-RW TS - T633A ATA Device. Hopefully, there is a solution for this that I am running out of ideas. I run Dell diagnostics. in the end, it's show "a few problems identified but diagnosis impossible to find a solution; No DVD disc not recognized. "

  Hello

  You can run the tool the following data section and check if this is useful.

  Your CD or DVD drive cannot read or write media

  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Problem with BIOS for Satellite L30-134 PSL33E v3.10

  Guy. I need new version of BIOS for PSL33E or earlier to 3.10.
  I can't download BIOS for PSL33U but I'm not sure that I need to install as the user R2D2 says:

  The series of mobile Americans is different and I guess the US BIOS is not fully compatible with the series of Europeans!
  Therefore, you should not use the BIOS from a U.S. Internet site. It's very risky!
  http://forums.computers.Toshiba-Europe.com/forums/message.jspa?MessageID=120416

  ASP is old BIOS also.

  Yes, R2D2 is right.
  If you are owner of the European model for Toshiba laptop, then you should use the drivers and BIOS from the European pilot of Toshiba page.
  If you are a laptop Toshiba U.S. owner then you should use the BIOS and drivers from the Toshiba page we.

  The update of the BIOS is always risky, and I do not recommend the use of updates to the BIOS that are not designed specifically for your model of laptop.

  Good bye

• Qosmio F30 - CD/DVD player can't read

  Hello
  any body can help me? A few months ago, I upgraded my Qosmio F30-112 from win XP to Win 7 Home premium, it's working prity good everything works fine. A few days ago I tried to play a movie but my Player cannot read the
  I tried to change another disc, but completely impossible to read a DVD disc. I heard the disc inside works, then I'm trying to trouble shoot using the tools DIFFICULTY was the messages:

  Playing and burning CDs, DVDs and Blu - ray Discs editor details

  Problems found
  The disk in drive [E:] is not detected or is not supportedThe disk in drive [E:] is not detected or is not supported
  The drive is empty, or the format of the disc is not supported. Not fixed
  UT message has been reading and burning CD, DVD and Blu - ray Discs editor details

  Problems found
  The disk in drive [E:] is not detected or is not supportedThe disk in drive [E:] is not detected or is not supported
  The drive is empty, or the format of the disc is not supported. Not fixed
  Insert a CD, DVD or BD completed support

  The player could face a problem player could face a problem
  The status of the device is OK. Windows will keep checking for possible problems during the use of optical drives to read or burn any CDs, DVDs or BDS Detected.
  Potential problems that have been verified
  The drive is a Plug and Play drive of Problemel device has a problem of Plug-and-Play device
  Windows has detected a device with this drive state error and will keep control of problems. There is no question
  A CD, DVD or BD player was not CD, DVD or BD Detecteeun player is not found.
  Windows does not detect a CD, DVD or BD player. It can be unplugged or disconnected. There is no question
  The drive is not assigned a drive letter [MAST * A DVD-RAM UJ-846 ATA Device] drive is not assigned a drive letter [MAST * A DVD-RAM UJ-846 ATA Device]
  The drive is not accessible without a drive letter assigned. There is no question

  Problems found details

  6 disc in drive [E:] is not detected or is not supported is not fixed

  The drive is empty, or the format of the disc is not supported.
  Insert a CD, DVD or BD completed support

  Invites to insert a CD, DVD or BD supported in the player.

  The player could face a detected problem

  The status of the device is OK. Windows will keep checking for possible problems during the use of optical drives to read or burn CDs, DVDs or BDs.

  Potential problems that have been verified detection details

  The drive has a problem of device Plug-and-Play is no issue

  Windows has detected a device with this drive state error and will keep control of problems.

  A CD, DVD or BD player was not detected issue not present

  Windows does not detect a CD, DVD or BD player. It can be unplugged or disconnected.

  The drive is not assigned a drive letter [MAST * A DVD-RAM UJ-846 ATA Device] question does not exist

  The drive is not accessible without a drive letter assigned.

  Details of detection

  A CD/DVD/BD drive is selected
  IDE\CDROMMAT***A_DVD-RAM_UJ-846S___F103___\5&3796F2E5&0&0.0.0

  The type of inserted media and other information.
  The drive is not recognized by the reader. The disc could be damaged, inserted backwards or have a format not supported.

  Collection information
  Computer name: QOSMIO-PC
  Windows Version: 6.1
  Architecture: x 86
  Time: Sunday, May 30, 2010 20:07:10

  Publisher details

  Reading and burning CDs, DVDs and Blu - ray discs
  Resolve problems that prevent playback or burning CD, DVD or BDs.
  Package Version: 1.0
  Publisher: Microsoft Corporation
  Reading and burning CDs, DVDs and Blu - ray discs
  Resolve problems that prevent playback or burning CD, DVD or BDs.
  Package Version: 1.0
  Publisher: Microsoft Corporation
  Reading and burning CDs, DVDs and Blu - ray discs
  Resolve problems that prevent playback or burning CD, DVD or BDs.
  Package Version: 1.0
  Publisher: Microsoft Corporation
  Hardware and devices
  Use equipment and access devices connected to your computer.
  Package Version: 1.1
  Publisher: Microsoft Corporation
  Hardware and devices
  Use equipment and access devices connected to your computer.
  Package Version: 1.1
  Publisher: Microsoft Corporation
  I tried all these things but I can't solve it, an organization can help me on this things

  Thank you
  rtmasagca

  Hello

  Try to remove the UpperFilters and LowerFilters.

  Here are the instructions:
  http://support.Microsoft.com/kb/982116

• DVD player can't read DVD

  Separated from this thread.

  I also have this problem. I can read a DVD that has files contained on a different PC, but it cannot read the DVD. I have the media center installed also. If this isn't the issue.

  Hi Mustang,

  Please follow the steps below and let us know if this solves the problem

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry.

  Remove the upper and lower filter key:

  1. Press the logo Windows + R to open the run dialog box.
  2. Type regedit in the run dialog box, and then press ENTER. If you are prompted for an administrator password or a confirmation, type the password, or click allow
  3. In the navigation pane, locate and then click the following registry subkey: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
  4. In the right pane, click UpperFilters.

     Note You can also see an UpperFilters.bak registry entry. You don't have to delete this entry. Click UpperFilters . If you do not see the UpperFilters registry entry, you may still have to delete the LowerFilters registry entry. To do this, go to step 7.

  5. On the Edit menu, click delete.
  6. When you are prompted to confirm the deletion, click Yes.
  7. In the right pane, click LowerFilters.

     Note If you do not see the LowerFilters registry entry, continue to the next resolution.

  8. On the Edit menu, click delete.
  9. When you are prompted to confirm the deletion, click Yes.

  10. exit the registry editor.

  11. restart the computer.

  Create the registry subkey

  1. Press the logo Windows + R to open the run box.
  2. Type regedit in the run box, and then press ENTER. If you are prompted for an administrator password or a confirmation, type the password, or click allow
  3. In the navigation pane, locate the following registry subkey: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\atapi
  4. Right-click atapi, point to new, and then click key.
  5. Type Controller0and press ENTER.
  6. Right-click Controller0, point to new, and then click Value of DWORD(32-bit) .
  7. Type EnumDevice1and press ENTER.
  8. Right-click EnumDevice1, click change....
  9. Type 1 in the value data box, and then click OK.

  10. exit the registry editor.

  Restart the computer.

  Hope that solves your problem, get back to us if you need further assistance for Windows.

• Re: Can I upgrade RAM on Satellite L30-134?

  Hello!

  My laptop is Satellite L30-134 (PSL33E-00E00WRU).

  I want to use RAM DDR2 800 Mhz 2 x 1 Gb in there. Is this possible?

  On the motherboard FSB speed is 533 MHz so I advise you to use compatible RAM modules.
  I don't know why you want to use these Rams from 800 MHz. For more performance or what?