Satellite l30-149, that nothing is visible on the screen

This pc with Vista has now stopped working. You can here that something starts, but the screen is black.
I connect a monitor to it and starts normally. You can see on the screen when Windows starts, and then the screen becomes black and you can here the melody telling you that Vista is started.
Then I start the pc in safe mode, all now seem ok on the Windows start screen. Now, the pc seems to work ok.

My guess is that the problem is in the graphics circuits on the motherboard.

If the problem was the screen that he must have worked OK when I started with an external display, but it didn't, only in safe mode.

Hello

It seems that the chip of the graphics card is affected.
As you say; If the screen of the laptop would be defective, the external monitor should work ok, but it doesn t. So I guess what he s GPU.

Unfortunately, in this case, you will need to replace the mobo ;(

Tags: Toshiba

Similar Questions

  • Satellite L - after that set BIOS to update the screen is black

    Hello

    I made an update of the BIOS on my Windows 7 64 bit, then the OS get frozen. After I restarted the laptop, ago just black and nothing appears on the laptop.

    What can I do?

    > What can I do?
    Time for boyfriend to ASP.

    It seems your BIOS did not complete successfully and the ROM module where the BIOS is stored has been damaged or has been flashed properly.

  • Satellite L30-149, only works with external monitor and VGA mode

    Satellite L30-149, Windows XP Home Edition

    Yesterday I did face the following problem:

    I swithched on my laptop but I have nothing on the screen. I tried to reboot several times, but it did not help. If I look very carefully, I see the logo of Intel (black text on white on the screen) but nothing else. The logo shows very low.

    I plugged on the external monitor. With that he gives a little more. The Intel logo with the instruction how to reach configuration etc. Then Windows logo but when it should ask the user, the external monitor going to sleep mode and nothing happens after that.

    And an external monitor, I managed to connect to Windows in safe mode and also in VGA mode. In VGA mode, I tried to change the resolution, after that I got black screen again and I had to start.

    Now I wonder if I could do something (update of drivers, etc.) or should I go to the store where I bought the laptop and ask them to fix it. This look like a problem covered by the warranty?

    --
    Upgrade to this message (what happened after that I wrote the above text).

    I turned on the laptop again. I thing the lightning from the room is now better because I noticed that the laptop seems to work (almost) correctly. Windows starts normally, I can faintly see the desktop. This seems to be a problem in the background ligthning. FnF7 does not change the situation.

    Post edited by: mpetas

    > If I look very carefully, I see the logo of Intel (black text on white on the screen) but nothing else. The logo shows very low.

    This sentence is very interesting.
    Sounds like a question of FL-ups!

    It is a small part behind the screen and control the backlight of the screens.
    Usually, this part is not very expensive and the replacement is not complicated to a technician for laptop.

    If your warranty is valid, then everything should be done for free.
    Try to contact the ASP in your country and ask for later handling.

    Greetings and good luck

  • Satellite L30-149-PXE-E61: Media test failure, check cable of

    Hello!

    My Toshiba Satellite L30-149 with the PSL35E-002002NS model number is equipped with a MK4032GSX drive HARD 40 GB, Bios V 1.90 and HP Windows XP Home edition.

    IT stops during startup with the text.

    For Realtek RTL8139 (x) /8130/ 810 x PCI Fast Ethernet Controller V2.13 (020326), PXE - E61: Media test failure, check cable PXE - M0F: exit ROM PXE, operating system not found.

    This occurs even if the disc is removed and seq. boot is changed so it should search the CD/DVD and even though the power and the battery has been disconnected for 15 minutes. If the power were during 20 hours them lights upward by DVD for a short so that at the next startup, but not if the power was turned off for a few minutes.

    Before he died, he showed the blue screen several times with diskerrors in the event log, and I was able to run/CHKDSK without errors a few times.

    Please advice how to reset the Fast Ethernet controller, not sure that a HDD defective only can cause the fault of I m.

    Thnx in advance
    Ben

    Hello

    I think that this is related to failure of HARD drive or lack of OS on the HARD drive.
    Is this message PXE ONLY appears if the portable computer is trying to boot from LAN.

    Means either the LAN was chosen in the BIOS as first boot device or operating system is not found on the HARD drive and so the BIOS automatically goes to the local network.

    So I recommend this audit in the worst case you will need to check if the new HARD drive would solve this

  • Problems with Satellite L30-149

    I recently reinstalled Windows Xp with SP3 on my Toshiba Satellite L30-149. When looking for audio drivers, I found a via
    Toshiba support. I was clear Notebook--> Equium L Series--> PSL35E (the only option)--> Windows XP.
    I installed this driver without error and now I sound down in the right corner of the desktop.

    If it must be installed correctly, but I get no sound from speakers or headphones. I looked at
    further discussion and it seems that many people have similar problems. I tried to install the driver for Vista, but it
    did not work (worked for somebody else, good...).

    Thanks for your help!

    Best regards

    Fredrik

    > So it must be installed correctly, but I get no sound from speakers or headphones
    First of all, you must check whether the sound card is correct and if there is no yellow exclamation point in Device Manager

    If the sound card will display correctly without any exclamation point means that the driver has been installed ok.

    In the next step, you should check the volume control.
    Go to control panel of-> sound-> playback and check volume control settings unique should be set at a higher level.
    In addition, check if mute is not activated!

  • HDD upgrade on Satellite L30-149

    Hello

    I want to change my hard drive of 80 GB to 320 GB. I'm computer Toshiba Satellite L30-149.
    I hope someone try it before and it works.

    If someone can Swedish please answer me too... Good day. MVH Emilia

    Hello

    It depends on the HARD disk controller.
    If the HARD disk controller support the 48-bit LBA then you would be able to use more than 128 GB of HARD drive

    Since ATA-6 also known as Ultra DMA mode 5 or Ultra-ATA100 the 48-bit LBA is supported.
    So now to know what the HARD drive controller is supported by your L30.

    I think you might find this detail using a program like Everest home edition for example.

    Install it and check it out!

  • Re: Satellite L855 and Windows 8 - can't adjust the screen brightness

    Hello world!

    I installed Windows 8 on my L855 Satellite and it is running pretty well except that I can not adjust the screen brightness. I have updated all drivers for win 8, but it does not solve the problem.

    Hope someone can help me! Thank you!!

    Can you do this using the settings in some diet plan?

  • Detect when the field gets the visibility on the screen

    Hi gurus

    I extended a BitmapField that when it is displayed on the screen is running a Thread internally in order to upload an image from a web server and then display it on the BitmapField. During the download of the Thread, it shows a dummy Bitmap.

    I am now the list 15 images on a screen in a VerticalFieldManager, and as soon as the application starts, 15 thread starts to download each image.

    When I run the application on the Simulator, with WiFi, all the images always get downloaded without problem all the time but when I run it on the device, sometimes the images are downloaded and sometimes some of them are not downloaded due to a "General socket error" (it is said the message of the Exception).

    This behavior is kind of random, I wonder that it is a restriction on the number of requests that a device can perform the carrier (by BIS) at the same time or something like that. Sometimes 15 images are always downloaded without problem.

    Now, the important thing, to circumvent the problem, what I'm trying to do is:

    Even if I add 15 images on the screen, only 3 images are visible at the same time (on the Curve 8520 in which I am testing now) so I'll try to find a way that only these 3 images run the download thread and when the user makes a scrolling to the bottom of the screen, the fields earning "visibility" on the screen start to run in their own thread too but didn't find a way to detect if a field of on the screen, and not only in the manager gains visibility of

    I try with:

    protected void onVisibilityChange(boolean visible)
    

    But as soon as the Manager is loaded on the screen, all fields run this even if events are now actually visible on the screen (they are in the lower part of the Manager)

    Is it possible to know when a field get visible only on the actual device screen and not on the virtual screen?

    Thank you!

    This might not work on all devices, but the first invocation of painting of the field is a good indicator.

    In my experience, the interface user of BlackBerry is very economical - everything that is not on the screen isn't painted. well, something that used to be on the screen and got a scroll being on could still be there in an internal buffer, so his painting could not called at all when it scrolls- but the first seems to be a pretty reliable indication.

  • Services tab is not visible on the screen of people

    Services tab is not visible on the screen of people.
    For some business groups, it is visible to some business groups that he is not.
    Is there something wrong set up?

    Thank you
    Archana

    Published by: archana. N July 28, 2012 15:21

    Search for MOS Doc 341238.1

    Here's the direct link - https://support.oracle.com/epmos/faces/ui/km/SearchDocDisplay.jspx?id=341238.1&type=DOCUMENT&displayIndex=1

    HTH
    Srini

  • My screen iphone6 is cracked and in my country, they can only change the iphone with a new one and with a very high price. Is there anyway that I could replace just the screen?

    My screen iphone6 is cracked and in my country, they can only change the iphone with a new one and with a very high price. Is there anyway that I could replace just the screen?

    No, if you want to keep all rights to the service or support from Apple. Not to mention the fact that it then will be bork Touch ID and make the phone unusable if ever, you restore or update of iOS.

    Apple doesn't sell parts of the iPhone. There is no legitimate sources for replacement screens.

  • all the pages that load do not match the screen have to scroll on the side to side to read

    all the pages that load do not match the screen have to scroll on the side to side to read

    all the pages that load do not match the screen have to scroll on the side to side to read

    =================================
    Try the following...

    View / Zoom... reduce the percentage

    The Zoom option can also be accessed from
    your at the bottom status bar.

    John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - to proceed at your own risk

  • I want to improve the Satellite L30-149

    Hello
    I was planning on upgrading my trusty laptop L30-149.
    RAM memory seem not to be a problem that I've played with this, going to get 2 * 1 GB because that's what he supports!

    But - Celeron M410 CPU, I am extremely confused which can handle the motherboard.
    I read another post that said we could use:
    Core solo (T1xxx), Core Duo (T2xxx) or even with Core 2 Duo?

    s ' would that be a valid processor?
    [http://www.netshop.se/aspx/produkt/prdinfoVnet.aspx?plid=30299]
    (Intel Core Duo T2400 1, 83GHz FSB667)

    and how the bios will respond to these tremendous changes? It can handle it?

    Ty for taking your time and reading this - I hope someone can answer my questions or suggestions are equipped!

    Hello

    You should have a look here in this article from Toshiba:

    [Is it possible to upgrade the CPU/GPU of a Toshiba laptop | http://aps2.toshiba-tro.de/kb0/FAQ7A01ZW0007R01.htm]

    There are several reasons why a CPU upgrade is not recommended, and not desirable.
    These updates can be done only at your own risk, because no one will be able to tell if the laptop would be stable after this upgrade.
    The BIOS is also designed not and not configured to different processors.
    Therefore, it can happen that your computer laptop malfunction.

    Welcome them

  • Satellite L655-149: recovery does not work with the new HARD drive

    Satellite L655-149

    PSK1JE

    Windows 7 Home Premium 64-bit (factory installed)

    Recovery of HARD drive on drive D (factory installed)

    My old toshiba (MK5065GSX) 500 GB hard drive became too noisy and slow so I plan to replace it with the new drive hard toshiba (MK5059GSXP) 500 GB.

    I created USB Flash HARD drive recovery.
    When the installation is complete and Setup installs devices an error "Windows Setup couldn't configure windows to run on a hardware on this computer.

    I've updated the bios
    I loaded by default in the bios
    I changed the SATA AHCI mode to compatibility IDLE

    assistance in this regard will be highly appreciated

    Set the BIOS to the default settings and try again.

    With the installation of recovery, there is a problem: either it works or not. If this isn't the case, bad luck and the only solution for you is to order original Toshiba recovery DVD on https://backupmedia.toshiba.eu/landing.aspx

    By the way: do you use that stick of recovery for the first time?

  • Satellite L30 PSL33E won't start at all - the LED blinks 6 times

    Hello

    My poor mother is quite upset! Its Satellite L30 PSL33E just died.

    It completely off and now won't start at all.
    Orange light flashes six times when you press the power button.
    No hard drive, fan, screen or any other noise / activity.

    She tried without the battery.

    A kind of hardware failure, I guess.

    Any ideas what this blink code means?

    Thanks in advance,
    D.

    I put t know what the code means, but you can read it. short means 0 and 1 long

    In any case, the error code means that a hardware failure has been detected on the motherboard and motherboard replacement could help you?
    Why?

    because what is really hard to fix a motherboard for laptop very s.
    It especially not possible if you n t s have sufficient knowledge, experience, and special tools.

    I think that either you contact the ASP in your country and ask a difficulty or you'll have to buy a new laptop ;(

  • Satellite L30-134: is it possible to determine the frequency of 533 MHz RAM?

    Hello!

    I have Satellite L30-134 and used a module of 1 GB / 667 MHz (sic!) for a while. Same Toshiba says maximum speed 533 MHz memory he recognizes module PC-5300 and sets exactly to 667 MHz.

    I decided to increase the RAM and bought another PC-5300 1 GB stick.
    ... RAM is only 1 GB with two modules together. The two sticks are OK - L30 sees 1 GB and works well with each of them separately.

    I know that the reason is that Toshiba couldn't work with greater speed on the two banks (or something like that).

    So. It seems to be a good idea to set the frequency of 533 MHz and it should work.
    The only question is to know how to do it? BIOS Setup is almost empty and does not have these settings.

    One advise, please (except to buy sticks more :)

    Hello

    Laptop Satellite L30-134 is a processor 1.5 GHz of Intel-Celeron-M (Yonah).
    Is this good?

    This processor supports a 533 Mhz bus and if you use modules of 533 Mhz RAM then will automatically solve this value!
    Simply put, you do not need to change anything manually! Everything is controlled automatically.

    Concerning

Maybe you are looking for

  • Factory unlocked iphone 6s gives error sim not supported

    Hey guys I recently bought a new iphone unlocked factory 6 sec New York, and he has not used in the States. Now I'm back in my country Pakistan, and it does not recognize the sim card I inserted even if it supports an iphone officially. It gives the

  • libraries with iTunes 12 issues

    I've just updated iTunes to version 12.3.3.17 and now NONE of my (almost 3 TB) files are present. After changing the location of my library on my external drive (where I keep) everything now seems to not be available or recognized... only files that

  • Satellite M40 - JM8 - black screen sometimes

    A month ago, I got a problem with the screen, one day it's black screen and I could barely icons on the desktop, so I replaced inverter and everything was going well for 2 weeks.After that it's the same thing (black screen). If I connect the monitor,

  • An internal tool or the library returned an error.

    I had a very slight modification of a source today and update the source file.  When I tried to build the distribution, however, failed to build with the following messages: "Error Part developer configuration options", then "an internal tool or the

  • Code 39 on CD/DVD players

    When I tried to install the 2012 Norton Security on my PC (Vista) and on my laptop (running Windows 7), I got a message saying that the process could not continue because the CD has been removed or disconnected.  I see now that I have a Code 39 on my