Satellite L30 - 14F - battery low CMOS and delivers after BIOS update

Similar Questions

• Satellite A200-AH6: Error Message: System CMOS checksum bad after BIOS update

  I've updated my laptop Satellite A200 - AH6 PSAE0C (Bios and graphic update) after the installation of Toshiba Power Saver.
  I downloaded the update of the BIOS on the Site of Toshiba and flashed my BIOS.

  After reboot and all start/stop that I do now, I get a black screen (splash screen) with these details listed thus:

  Updated System Configuration data
  ERROR
  0271: check date and time
  WARNING
  0251: System CMOS checksum bad - default configuration used

  Can someone help me please?
  If anything, I would just restore my old BIOS, if possible.

  Please, someone help!

  Hello

  Have you tried to access the BIOS and tried to set it to default settings?
  Isn't it? Do this!

  By pressing the F2 key, you would be able to access the BIOS. Set the BIOS back to default settings and set up.
  Then start the laptop again and check if the same notification will appear on the screen.

  Welcome them

• Satellite U500 - 11G - noise of the fan speed after BIOS update

  Hello

  I have the Toshiba Satellite U500 - 11G.
  I've recently updated the BIOS because my CPU fan did not work under Ubuntu,
  But after the update, my CPU fan speed is faster then normal and make a lot of noise (even if the CPU is cool) when I use Windows 7 is still stay on fast speed making a lot of noise.

  Do we sort of degrading the BIOS or thw way to earn the slow CPU fan speed?

  Concerning
  Sagar

  Update BIOS because of Linux? You know that Linux is not possible on this laptop model?

  In any case, to reduce the fan sped Please reduce the cooling in saving settings method.
  Control Panel > Power Options > go to your preferred power plan settings and choose advanced power options > Toshiba saving settings > cooling method > set to optimized battery.

• Satellite A300-20 b - Touchpad does not work after BIOS update

  I've updated the BIOS on my Satellite A300-20 b latest version 2.00. Update succeeded, but when I rebooted system touchpad has stopped working.

  I tried to find the solution, resettled drivers (windows XP system). In the Windows Device Manager there is no problem with Synaptics PS/2 Port Touchpad, I see. Software Synaptics shows no problem I can enable and disable the touchpad, but it does not work for the touchpad. I tried Linux live CD and in this system does not work as good touchpad. I think there is problem in this version of the BIOS.

  Does anyone have the same problem?

  Hey Buddy,

  Have you tried to turn the touchpad on or off if you press FN + F9? Check this please!
  Also, try to load the default settings in the BIOS.

  What happens if you connect an external mouse to the laptop? It work?

  I can t imagine that the BIOS update causing this problem. If it doesn't work, you need to contact a service provider for help. They can check the touchpad and replace.

• Satellite A500-17 x - micro does not work after BIOS update

  I have a Toshiba Satellite A500-17 x which I have just updated the BIOS to version 2, as recommended by the tempro software. Now with the new update my microphone does not work. Where can I download a copy of the old BIOS?

  ({I used winphlash64 in advanced mode to restore the original backup, it does to the computer, but it just gives the new bios to}) Thank you rich

  Hello

  BIOS cannot be demoted in windows mode.
  Even if you use an older version of BIOS update, you will get an error message saying that the latest BIOS version is already installed. So, forget the downgrade.

  By the way: I put t think the update of the BIOS assigned the microphone.

  Go to control panel of-> sound-> recording tab.
  Here you will see all the available recording devices (micro)

  Activate the microphone it (in this case the people with reduced mobility) and set its default value.

  Where it works: reinstall the audio driver.

• Re: Satellite A135-S7403 does not pass the POST after BIOS update

  Hello

  I A135-S7403, I know it's old, but well, I worked until I installed a new version of Bios (1.90 for Satellite A130 (PSAD0U/PSAD3U) on the official website of Toshiba (here: http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/modelContent.jsp?ct=DL&os=&category=&moid=1854878& rpn = PSAD0U & modelFilter = & SelCategorie = 3 & selFamily = 10 73768663).)

  All installed no problem, but when I restart the laptop, it does not start.
  It freezes on screen with red writing "in touch with tomorrow TOSHIBA" and I can't do anything.
  What should I do? And why this official update broke down my computer?

  Hello

  Something has gone wrong with your update of the bios, this is why the Tower cannot start. Also, can you enter the Bios itself?

• Satellite A135-S2286 - USB ports does not work after BIOS update

  I recently had the dreaded BIOS password prompt problem. I checked online to the toshiba support site and took the laptop to a toshiba authorized service center and is fixed by getting the updated BIOS updated to 1.60, but after update BIOS, none of my USB ports work.

  When I connect a USB device, a warning from yellow pop up comes up unrecognized USB device. The same USB device works fine on other computers/laptops. I searched online for a solution and found on a lot of people have the same problem, but did not find any fix for this error.

  It will be useful, if someone has a solution for this error.

  Hey Buddy,

  Is there yellow exclamation marks in Device Manager next to USB ports or they appear correctly?

  If you notice a yellow exclamation you must remove the USB port and restart the computer. All USB ports are installed automatically, you do not need an additional driver.

  I hope that it helps :)

• Satellite L735-103: one key does not work after BIOS update

  Hello

  I got a Sat L735-103, part no: PSK0CE - 00N0OUEP and I download the bios for this pc, toshiba Web site.
  I have updated bios with no problem, but now a realization thatm a key (the key located in the good of "* f ' and 'z') of the keyboard does not work.
  I have a plate with windows and linux, and the result is the same.

  Maybey I need to go back to the old bios, but in the toshiba Web site only have a bios download: (.)

  Hello

  Somehow, I can't believe that this button malfunction has something to do with the new BIOS.
  Have you noticed the anomaly key immediately after the update of the BIOS?
  You have default BIOS? If not, access the BIOS by pressing F2 when starting the laptop.
  Here, you can set default BIOS and then save the changes.

  If this is not enough, I would recommend contacting the Toshiba ASP because the technician must check whether the button is defective. In this case, replace the keyboard. The technician would be able to downgrade the BIOS as well and could check if it of really a BIOS issue.

  To find an authorized Toshiba (ASP) Service Provider anywhere in the world, please visit:
  http://EU.computers.Toshiba-Europe.com--> "Support and downloads"--> "to find an authorized service provider" (down in the menu maintenance & repair).

• Satellite A110-275: more a low-memory graphics card after BIOS 1.30 update

  Hello

  I am the owner of:
  Satellite A110-275
  Part number: PSAB0E-00T00TEN
  graphics card intel gma 945 up to 128 MB.

  Recently, I updated the bios of 1.20 to 1.30 and after reboot, I lost 64 megabytes of 'graphics card capabilities.
  After bios update, my computer is much lower. Why? How can one get 128 MB of memory on my intel gma 945?

  also s it is possible to manually change a file and configure gma 945 capacities up to 256 MB? I have a lot of ram and I could use it for games, now I can use only 8 to 64 MB.

  Concerning
  Piter

  Hello Pit

  I posted my opinion that I don't think there could be a problem in your second topic.
  As far as I know the laptop came with graphics card Intel shared memory. 8-128 MB of memory could be chosen.

  To my knowledge the Intel driver graphics card automatically controls the value of memory sheared. If need more than MB of graphics card memory so it will be assigned automatically.

  PS: In my opinion it is not possible to select 256 MB because the hardware does not support.

• Unknown device on the Satellite A100-153, after BIOS update to 5.1

  ACPI\TOS1901 * TOS1901<--- this="" is="" the="" unknown="" device="" after="" bios="" update="" to="" 5.10="" on="" my="" satellite="" a100-153="">

  Vista now shows it in as unknown device manager; the TOS1900 showed up too, but after installation of Toshiba Value Pack for Vista, it went.

  Help, please. WHICH IS: ACPI\TOS1901 * TOS1901

  Hello

  ACPI-> Advanced Configuration and Power Interface
  ACPI defines hardware and software interfaces that allow focus on the OS configuration and power management to enumerate and configure motherboard devices.
  For example: ACPI is necessary for the standby and hibernation mode.

  Now your question; the new BIOS has been updated and configured to using VISTA.
  It seems that VISTA was not compatible with the previous version of BIOS because the ACPI interface. Now you can install Vista on the laptop, but it seems that you need a driver. Possibly new chipset driver version might help. But as you probably know, the drivers are not available at this time. Unfortunately

• Satellite L450D - 13 X - blue screen after BIOS update

  I have the blue screen after BIOS update. Satellite L450D - 13 X worked ok before that ideas?

  Is there contact information for Support TOSHIBA?

  Hey,.

  > Is there any TOSHIBA support contact information?
  No, becaue, must contact an authorized service provider. Guys can help on any hardware and software problems and can also order spare parts from Toshiba.

  Here is a list of aspic, where you can look closer:
  http://EU.computers.Toshiba-Europe.com/innovation/generic/ASP_SUPPORT

  Good luck! :)
  ?

• lost preferences and connections after installation update

  lost connections and preferences after install update today
  
  Hello
  I have just taken the real update with the Update Wizard
  but now all my preferences and far and missing connections.
  
  Why the wizard asks to update from a previous version,
  When to replace my preferences?
  
  my being the question Wizard is not accurate enough to see what to do for a user 'normal '?
  
  
  Can I get my old preferences?
  
  concerning
  Norbert

  This might help in your situation

  Upgrade problem. The lost connection.

• Satellite L30: Watch DVD problem - slowly and the sound is distorted

  Hello!
  I have a Toshiba laptop Satellite L30-115. I use WinDVD preinstalled to watch DVD. everything was fine until yesterday. Since then, my DVD drive seems to have problems with playback of DVD movies (original).

  It's a little slower that should be, and the sound is a bit distorted. The same DVD my laptop no problems to play now, it seems impossible to play properly.

  I tried system recovery to date, everything was good, but that did not help.

  Everything's fine, when I play movies from my hard drive, but apparently my DVD Player cannot play fair.
  I tried various combinations (turn on/off digital playback in Device Manager), but nothing seems to work.

  No idea how to fix?

  First of all, give it a try with cleaning the lens of your DVD player. Several times a lens dirty or CD/DVD that makes impossible to correct read causing delays.
  Because the movies read from the HARD disk correctly, it does not seem to be a related problem of codec, but... you should still try to use other DVD player software to ensure that WinDVD is not the source.

  I suggest you also to keep longer, to install software of reduction of CD speed during normal use of all the days of the life of your drive. As you know, the disc spins a lot faster than actually required inside the car which complicates the procedure for reading (especially on the scratched CD) and consumes more energy, too.

  Reduce speed solves problems like the one you have several times. Here is a link to the Version of acoustic silencer of TOSHIBA 1.00.008 (from page of the pilot satellite L30), give it a try:

  http://support.toshiba-tro.de/tools/satellite/sl30psl33/XP/acoustic-silencer/acsil-PSL33-XP-100008-en.zip
  (This software runs independent you have European/American version of laptop L30, even on a different model as Satellite Pro 6100 a.s.o..)

  Kind regards
  chain

• Satellite L30 - 10W: Double OS Vista and XP

  Hello.

  I have the Satellite L30 - 10W with Windows Vista Home Basic. How to install another operating system Windows XP Home Edition?

  Hello Miriam

  I didn't try it until now, but it shouldn't be a problem. I don't know how is your laptop L30 preinstalled, but I imagine that the HARD drive is shared twice and contains two partitions (C and D). Am I wrong?

  Each Vista preinstalled Toshiba laptop also has a WinRE partition (1.5 GB for OS not visible). When you start installing WXP be careful and choose the right partition for the installation of operating system Windows XP Home edition.

  Start Microsoft WXP facilities procedure, follow the on-screen menu and chose the second partition (D) as a place of installation of Windows XP Home edition.

  Before you begin installation of WXP visit Toshiba download page to see if this model of laptop is WXP supported and if all necessary WXP drivers are available.

• Satellite C660D white screen after BIOS update

  I ran the update of the BIOS on laptop Satellite C660D PSC1YE recommended and he appeared to succeed, but when it restarts the screen won't turn on. I tried a few things to fix, but nothing worked.

  Tried:

  • connect an external monitor via VGA - white too
  • remove the battery of the CMOS button
  • removing a hard drive startup, to replace again
  • a short-circuit the J1 jumper under RAM slots

  What else can I try?

  Here is the windows bios update program:
  http://Support1.toshiba-tro.de/Tedd-...0601184846.zip

  Try to start with the battery.