Satellite L30 - after upgrading RAM OS crashes and BSOD is shown

Similar Questions

• After upgrading RAM, computer stops and gives error when restarting: "DISK BOOT FAILURE, INSERT SYSTEM DISK".

  Original title : OFFICE XP STOPS (MESSAGE of ERROR)

  I get the message "DISK BOOT FAILURE, INSERT SYSTEM DISK". I just added more memory to my 512 RAM. I USED MY XP TO REBOOT DISC, BUT THERE ARE ALWAYS AFTER PRESSING THE KEY 'R '. ONCE IT STARTS AND SE PAST JUST STOPS AND THE ERROR MESSAGE IS POSTER AGAIN UPWARD. I HAVE THE SAME 'MSCONFIGED' IT NORMAL TO SELECTIVE. I WAS ABLE TO GET INTO SAFE MODE, BUT NOW IT WON'T. I GET JUST THE ERROR MESSAGE.       > WHAT AM I DOING WRONG

  Hello

  You can view these methods:

  Method 1: As a first step, check to see if the hard disk becomes detected or listed in the Basic Input/Output system (BIOS). Also, be sure to change the boot order in the CMOS settings so that thehard drive is the first on the list.

  Note: To learn how, see the documentation provided with your computer or contact the manufacturer of your computer.

  Note: BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from configuration can resolved BIOS/CMOS settings. Changes to settings are at your own risk.

  Method 2: If the manufacturer has installed the Recovery Console on your computer, perform the check disk to fix this.

  At the recovery console command line, type:

  Chkdsk /r

  When you restart your system, your computer will be scanned for errors and will try to correct them.

  Note: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  For more information, see:

  How to perform disk error checking in Windows XP

  Chkdsk

• Satellite A660: After upgrade to Win 8.1 BSOD is displayed using the keyboard

  Dynabook i7 3D laptop A660.

  OK; so I updated my i7 3D Dynabook to form 8.1 Windows (x 64) Windows 7 (x 64), and now the laptop restarts everytime I start to touch the keyboard.

  Other wise works perfectly.

  It took me two hundred hours to understand that I was typing on web sites usually when this re-boot occurs. And I could not remember how or why the computer restarted.

  When I press the numeric keypad 'more' sign, I get the BSoD immediately. But there are a few presses of the numbers on the keyboard so he can do the same thing.

  I.E.
  If I press 1, 2, 3, its ok.
  But
  If I press 1, 2, 3, 4, 5, 6, 7, the laptop gets a BSoD and restarts.

  I also installed automatic software (mouse) for a Microsoft mouse, that I was going to use. and I deleted in the "System Properties" after the problem has arisen; but there is no change.

  Whenever I tap on the number pad (especially the plus sign), the PS stops with a blue screen of death BSoD.

  Any ideas?

  Hi Roger,
  My knowledge the 8.1 Windows isn't supported by Satellite A660 because there is no driver Windows 8.1 special to this series of portable, but even if these drivers have not been released, is not a big problem to install and run the Windows 8.1 on this unit.

  I m wondering how you installed the 8.1 to win on this laptop?
  You upgrade Windows 7 to 8.1 Win or were you running a fresh install of Win 8.1?

  Here's a nice page of Microsoft providing some FAQ about update for Windows 8.1
  [Windows 8.1 update: FAQ | http://windows.microsoft.com/en-US/windows-8/upgrade-to-windows-8]

  In case you have done an UPGRADE to 8.1 Win, you can use Windows 8.1 Upgrade Assistant to check if your programs and devices are compatible with Windows 8.1.

  I would be also interesting to know if the same BSOD would appear if external keyboard would be connected to the laptop.
  When using the external keyboard would cause NOT of BSOD, I guess internal keyboard is faulty and could be the troublemaker.

• After a hard drive crash and recover most of my files on an external hard drive but who eventually became my only internal, because I live on an island in South America and there is virtually nobody on the island I live it can he

  After a hard drive crash and recover most of my files on an external hard drive which eventually became my only internal, but because I live on an island in South America and there's hardly anyone on the island I live who can help other that a friend, I took a trip to Miami to visit the genius bar and they did a new install of Capitan which I don't really like by the way.  In any case, I though I had lost all my iPhoto library, but I managed to find my photos. Only now I have two libraries... the iPhoto with images from my Photos on Capitan and 8 years.  Is it possible to consolidate them in a library?  And can I still use RAW to be able to edit photos? aIso, y at - it a tutorial for the Photos?

  In the future more facts and less editorial help here

  SO now, we know all about how you feel but nothing on your system or your problem

  What version of El Captain do you have (10.11.3 is the current version with Photos 1.3)

  You cannot merge libraries without third party software - Photos of power can merge pictures libraries

  You can migrate iPhoto libraries to libraries of Photos by dragging Photos icon in the Dock

  When you first launched the Photos it has migrated the last used for Photos iPhoto library

  I hope this will help, but to get specific answers, you need to provide real information and not feelings

  LN

• I need to re-download my cs6 after my book mac crashed and I can't find my package to get the serial number. I need help, I'm just in the middle of editing a photoshoot... ugh!

  I need to re-download my cs6 after my book mac crashed and I can't find my package to get the serial number. Need help please, I'm in the middle of editing a photoshoot... ugh.

  You can download it here: download Creative Suite 6 applications

  If you registered with Adobe, the serial number is the Adobe ID and the password that will be used.

  Otherwise, it will work as a giving fully functional 30-day trial you time to find the package.

  Gene

• Error message "" serial number entered is valid, but calling it a product irritate lies on this computer "appears." Cannot reinstall CS5.5 on my macbook pro after that hard drive crashed and was replaced.

  Error msg "the serial number you entered is valid, but cannot find a product calling on this computer" appears. Impossible to reinstall CS5.5 on Macbook pro after the hard drive crashed and was changed.

  Hello

  Thank you for your response. I've finally managed to connect with a support staff through the online chat portal & advises him to download CS3 web premium. Tried to find it, but this option is not available in scrolling to the bottom of the box. Ultimately, the staff had to help me to unlock the CS5.5 update manually from its end. He indicated that, in my case, the situation could not be resolved through this method, and I'd still have to contact support via the portal chat staff to help unlock my CS5.5 If this problem occur again should I need to reinstall it on a new computer laptop.

• Satellite C660 - Windows 7 64 bit BSOD after upgrade RAM

  Hi guys

  my laptop Specs: Satellite C660-1JG
  -Genuine Windows® 7 Home Premium 64-bit (pre-installed, Toshiba-HDD recovery)
  -Intel® Celeron® Processor T3500
  -2048 MB of RAM DDR3 (800 MHz).

  recently I increase my RAM to 4 GB (2 + 2 GB), since its installation, as soon windows7 64 bit beginning of loading, finished with BSOD. load BSOD Windows sometimes very well, but in a minute or two appears. I can confirm that it does not read the total RAM of 4 GB, I checked while the laptop was about 2 to 3 minutes ON. then I go out 1 RAM stick laptop is fine, no BSOD!

  so question raises if the RAM is at fault, incompatibility etc, but I have the dual boot OS and other OS is Ubuntu 11. who reads the 3.84 GB RAM and without crashing or BSOD or any question.

  Then I installed Windos 7 32 bit to see if that still has problems with 4 GB of RAM, but NO, 32 bit reads RAM 4 GB (usable 2.8 GB). without crashing or BSOD with 32, only problem with windows 64-bit version!
  I checked the specification it says Max RAM 4 GB Ram and yes it supports 4 GB RAM with Linux and win7 32-bit.

  I tried to update BIOS version 1.20 (currently on 1.40), but still got error: Firmware has no support of Flash (AFUWINGUI).
  I was wondering if any of you can guide me to the right direction.
  Thanks in advance
  Concerning

  I can't say for sure, but perhaps BSOD due to a compatibility issue.
  What RAM you bought as add-on (brand and specification)?

• Satellite A660 - 10 X - no boot after upgrading RAM 8 GB, but 4 GB + 2 GB only

  Hello

  Today I bought two sticks of Kingston 4 GB DDR3 1066 MHz CL7 and I'm trying to replace my 2 GB ones, but something is wrong.

  If I put two sticks of 4 GB laptop does not start. I have the latest version of the BIOS (1.80). I have restored the default settings after upgrade.

  But it's quite strange, because if I put a strip of 4 GB and a 2 GB stick system starts and everything is fine (with memtest86 + too). But there is still one thing: 4 GB stick should be rolled in the dock before, above second, 2 GB module. If I reverse cell phone memory will not start again.

  Is - everyone knows how to solve my problem? Is this a BIOS problem? BIOS version which A660 takes in charge the amount of 8 GB of RAM with no problems? I can downgrade from the BIOS, because I don't know if Toshiba help update.

  Thanks in advance.

  Is this exact module the same 4 GB RAM listed on THIS page?

• Equium L30: After upgrade to XP keys Fn + F5 and Fn + F8 will not work

  My Equium L30 was purchased with Windows XP Home edition. The Fn + F5 and Fn + F8 keys do not work after upgrading to XP Professional.

  I have re-installed all the utility pilot, pilot display and utilities, but they still do not work. Anyone has a solution to this problem, or van suggest how to connect a projector to the PC in a different way?

  (I can extend my desktop to a projector, but not to display the same image on the LCD screen and the projector)

  Hello

  Why you n t read the document page of the Toshiba driver installation instructions and install all drivers of Tosh appearing in this document?
  Is that if no n t button work, the drivers are missing or you have installed the wrong drivers.
  I think that you didn t install the drivers needed!

  So check the installation instructions document!

• [DV6-3140SL] Problem in my laptop after upgrading RAM

  Hi all,

  I want to upgrade the memory of my laptop HP DV6-3140SL model.

  Original RAM installed is a Micron 16JSF51264HZ-1G4D1, size 4GB.

  Then I bought 2 modules of the model Corsair CMSO4GX3M1A1333C9 (4 GB x 2 = 8 GB total)

  but when I installed this 2 cylinders in my notebook, start windows crashes;

  Sometimes I see Loading icon of progress, but immediately laptop restarts.

  BIOS recognizes correctly 8 GB and memory (the utility in the BIOS) test is OK.

  CMSO4GX3M1A1333C9 should has the same features as the original model of 16JSF51264HZ-1G4D1:

  SODIMM DDR3 PC3-10600 (1333 Mhz)

  What could be the problem? Incompatibility? Or faulty RAM memory?

  Note: NA is 8 64-bit Windows (W8 is an upgrade to Windows 7 original)

  Thank you for the support.

  Paolo.

  paolo220177 wrote:
  

  Hi all,

  I want to upgrade the memory of my laptop HP DV6-3140SL model.

  Original RAM installed is a Micron 16JSF51264HZ-1G4D1, size 4GB.

  Then I bought 2 modules of the model Corsair CMSO4GX3M1A1333C9 (4 GB x 2 = 8 GB total)

  but when I installed this 2 cylinders in my notebook, start windows crashes;

  Sometimes I see Loading icon of progress, but immediately laptop restarts.

  BIOS recognizes correctly 8 GB and memory (the utility in the BIOS) test is OK.

  CMSO4GX3M1A1333C9 should has the same features as the original model of 16JSF51264HZ-1G4D1:

  SODIMM DDR3 PC3-10600 (1333 Mhz)

  What could be the problem? Incompatibility? Or faulty RAM memory? Incompatible memory modules

  Note: NA is 8 64-bit Windows (W8 is an upgrade to Windows 7 original)

  Thank you for the support.

  Paolo.

  You must use the Configurator of Corsair compatibility on their Web site.

  See if you can return the modules. The modules seen in the image below are the only guaranteed compatible modules by Corsair. Unfortunately, they are not modules of 4 GB compatible to your laptop.

  

  Memory of Kingston, on the other hand, is it guaranteed compatible 2 GB and 4 GB modules of memory for your laptop. With Kingston, bars of memory, you can upgrade to 8 GB and do work correctly the first time you start it back up after the upgrade.

  

• Satellite L30 - 10Y - upgrade successful but CPU fan is running

  Hi ppl,
  This post is more than a FYI post.

  I gave myself a defective Aspire 5610 and decided to whip the CPU out of it and put it in my Toshiba Satellite L30 and it works! CPU of the Satellite is a series of Intel Celeron M @ 1.87 Ghz, while the Acer processor is an Intel T2300 Centrino Duo 1.66 GHz. So my Satellite is now slightly faster, but added to it's 2 GB of RAM and a hard drive upgraded to 320 GB under Windows 7 Ultimate. While its still not a game machine, it creaks all the numbers that I throw at it!
  Hope this helps someone.

  I noticed that the fan runs almost constantly, suggestions?

  Concerning
  Markkyboy

  Hey,.

  Thanks for this very interesting article! It of Nice to hear this new CPU works fine, but I have to say there is no guarantee for this, but you have chance ;)
  Update CPU's official not taken in charge, but in some cases, it may work, depending on the motherboard, BIOS and CPU.

  In any case, I think the fan runs almost constantly because the newer and more powerful CPU producing much more heat and it must be cooled cooling system that is designed for your older CPU.
  All you can do is to clean the cooling system, but I think you have already done this during the exchange of CPU and use of grease thermal correct amount.

• Laptop not start after upgrading the BIOS crash

  Hi all

  I just want to ask if there a chance to reactivate my Satellite A300 after crash BISO update without it sends to the service of Toshiba.

  I downloaded the new BISO and he started in the Windows menu. After a few seconds my PC crashed and everything was frozen.
  I turned off the PC.
  Now, when I press the power button to boot up the laptop, the screen is black and I can a sound BRR, BRR, BRR of the CD-Rom drive.

  Don't you think that it is possible to boot from a CD or something like that. Is it possible to reactivate my phone?

  Your help would be really appreciated!

  Thank you very much

  Best regards

  Chotte

  Sorry but if the BIOS chip is damaged there is not a lot, you can do about it. You must contact the Toshiba authorized service provider.

• HP all-in - One PC 19-2113w 19: white/black screen after upgrading RAM

  Hello

  So I have upgraded RAM using 2 x 4 GB SODIMM DDR3 Corsair 1600 Mhz, after installing the PC boots but screen is white/black

  steps to follow:

  1. I tried with 1 socket by using only a RAM, screen black

  2. I tried with 2 socket using RAM only one with the same RAM step 1, screen black

  3. I tried step 1 and 2 using the other RAM, screen black

  now here it gets interesting

  4 tried 1 socket using Original/factory RAM, screen black

  5 tried 2 socket using Original/factory RAM, screen black

  6. tried without any RAM at all, looks like a lack of RAM, screen black

  Now, to each measure adopted, I must say that the screen sound not only not showing things, but its totally black as it does at all, until the system starts normally. !

  Is it Possible the upgrade of RAM affect the screen? or maybe when I was replacing the RAM I hit some conecting by cable to screen or something?

  HP 19 all-in-ONE PC

  Product No.G4B06AA #ABA

  Model n ° 19-2113w

  10 64-bit Windows

  Update

  Removed the battery and hold the power for 30 sec button (BIOS reset if I'm not mistaken?) now it works with the orginal of RAM so I guess my new RAM that's the problem!

• Why Windows Aero does not work after upgrade RAM?

  After that I recently updated my computer desk with 2 new modules 1 GB DDR PC3200 400 mhz 184pin RAM

  PROBLEMS:
  * Windows Aero stopped working.
  * Windows recognizes only 3.5 GB of RAM on 4.
  * Windows Experience Index will not refresh the WEI Score.
  Any help with this?
  I'm back to the old RAM modules and all is well, but whenever I update the last two RAM modules, these errors occur.
  
  MY RIG:
  OS: Windows 7 Ultimate.
  SR1830NX Compaq
  Max supported RAM: 4 GB PC3200 400 Mhz 184pin DDR (4 Slots of 1 GB each)
  Configuration of the RAM before upgrading (physical)
  SLOT 1: 1 GB
  SLOT 2: 1 GB
  SLOT 3: 512 MB
  SLOT 4: 512 MB
  (although she had 3 GB installed, only 2.5 were recognized).
  Configuration of the RAM after upgrading (physical)
  Slots 1-4: 1 GB each
  Configuration of the BIOS:
  Slot SCHEDULES 1,2 & 4: 1 GB in each slot
  SLOT 3: 512 MB (even if it has 1 GB installed in this slot)

  You seem to have a hardware failure with slot 3. See if there is an update to the BIOS of your card mother, but don't hold your breath. There may not be one and he will probably not correct the problem if there is.

  There is always to be small amount of RAM allocated to the system. Integrated video will be stick like a leech some as well as the network interface card. It's normal, regardless of the version of the installed operating system bit...

• Strange question after upgrading RAM on Tecra M10

  Greetings gurus,

  Pleeeaase help...

  I recently upgraded my M10-PTMB1E to 8 GB of RAM of 2 GB.

  My bios sees 8GB, Windows tells me I have 8 GB installed but 3.8 GB usable, it checked with a boot CD. Then, I pulled one of the external 4 GB chips and replace the 2 GB in. Windows detects the 6 GB.

  I tested the RAM with memtest and these two circuits passed (although memtest is only 4 GB)

  I thought it would be a case of updating the BIOS, but if I run the .exe files in 20091103164158-bios, bios-20091104152403 or the bios-20091104172541, I get an error saying "this computer is is not supported.

  Could someone please tell me: -.
  (1) this machine does really take 8 GB
  (2) if so, what changes should I do so that he can use all the 8 GB (unless of course the VGA)
  (3) what the BIOS update do I need

  Thank you for your help

  Hello

  I n t have this model of laptop, but I'll try to help.

  # Yes, this laptop model supports up to 8 GB of RAM
  # Perhaps this document will help you http://aps2.toshiba-tro.de/kb0/TSB82022E0000R01.htm
  # In general you don't need to be. Just if you want to you can update the BIOS, but the old one should be OK. Just make sure that you are using compatible RAM modules.