Satellite L30: CD player does not work with the new HARD drive

Similar Questions

• Satellite L655-149: recovery does not work with the new HARD drive

  Satellite L655-149

  PSK1JE

  Windows 7 Home Premium 64-bit (factory installed)

  Recovery of HARD drive on drive D (factory installed)

  My old toshiba (MK5065GSX) 500 GB hard drive became too noisy and slow so I plan to replace it with the new drive hard toshiba (MK5059GSXP) 500 GB.

  I created USB Flash HARD drive recovery.
  When the installation is complete and Setup installs devices an error "Windows Setup couldn't configure windows to run on a hardware on this computer.

  I've updated the bios
  I loaded by default in the bios
  I changed the SATA AHCI mode to compatibility IDLE

  assistance in this regard will be highly appreciated

  Set the BIOS to the default settings and try again.

  With the installation of recovery, there is a problem: either it works or not. If this isn't the case, bad luck and the only solution for you is to order original Toshiba recovery DVD on https://backupmedia.toshiba.eu/landing.aspx

  By the way: do you use that stick of recovery for the first time?

• Recovery disks do not work with the new hard drive?

  Hello, everyone.

  I have a laptop HP (pavilion dv7-1245dx) and the hard drive is dead. I had never gotten to burn my recovery disks, so I ordered new ones from HP. When I installed the new hard drive and popped in the disk to reinstall the operating system, it gave me the error message:

  "This PC is not supported by the system recovery discs. You can continue to recover this system with these discs. »

  Error code: 0100-30 FC-3602-3603

  The original hard drive was a Hitachi, 320 GB SATA

  The new hard drive is a WD 500 GB SATA

  Any assistance anyone can give would be great. :]

  Thank you for your time,

  C

  EDIT: Trying to recover a Vista operating system

  For anyone who has the same problem, I found a solution. I cloned the original hard drive using the Clonezilla fallback option. After using Clonezilla to image on the new hard disk, the partition which held that most of the data of the laptop is not mountable, however the partition containing the restore partition was a perfect copy. I turned on the computer, hit escape to access the menu (for a list of options such as boot order, etc, which included an option for recovery), and then choose recovery option. While the recovery discs, I received from HP refused to work with the new hard drive, the Vista restored cloned recovery partition without flaw.

• Satellite A110 - switch WiFi does not work with the new WiFi card

  Hello everyone

  I have a problem with my laptop Toshiba Satellite A110 - 178 (PSAB0E). I replaced the original Intel 3945abg with Intel Link 5100 WIFI card and on the new wifi hardware wifi card switch does not work.

  New wifi card is discovered and drivers to the correct job but when I try to search with the Intel Pro/Wireless software wifi networks I message to turn on hardware switch, but there light and not work. The old wifi card swich works OK - orange light is on. On the new map light is off and swich does not work.

  Help, please

  Hello

  Do you have also enabled the WLAN functionality by pressing FN + F8?
  Check it!

  In addition, I think the case is clear: the new wireless LAN card isn't compatible with Satellite A110.
  So in my opinion, you must use remove the new card Intel and install the old card that works fine in your laptop.

• Satellite 1800-712 does not start with the new HARD drive

  Hello world.

  I am currently trying to install a new HARD drive in my notebook of 1800-712.
  I'm having a few trubbles as my Satellite won't start with my new HARD drive.

  I upgraded my BIOS to the latest version.
  The new HARD drive is a 40 GB Samsung.

  Any suggestions on what I need to do to make it all works?

  THX, Philippe

  Hello

  This device was shipped with 20 GB HARD drive.
  You again is 40 GB.
  I guess that the BIOS does not recognize the HARD drive because of the size.

• SMU 8108 does not start with the new hard drive

  Hello

  I am currently using SMU 8108 with SMU-1062 q.

  The previous record was borken, so I had to install a new hard drive.

  The new hard drive is fommatted as NTFS format, and it is currently mounted on 8108.

  Unfortunately, I don't have recovery disk available to the general public so I am trying to install Windows 7 on a blank hard drive.

  When you start, the LED OK PWK light is all the time, orange DRIVE LED turns on for a few seconds only when I turn on the switch.

  LabVIEW RT switches are all off, I cleared CMOS several times to the Board of Directors, but the screen does not show anything.

  I tried to use my DVI monitor with any other device as well, and it worked, so there is no problem with the monitor.

  In addition, I tried to go in window safe mode by pressing F8 or Del it didn't work, so I can't see anything on the screen when his kick upward.

  I tried to put a lot of information I can it will be very appreciated if you can help me with this problem please.

  You said that you can't in Windows safe mode, you have installed Windows on the hard drive?  Are you able to get into the BIOS of the controller?

  If you are not able to access the BIOS for the controller, it may be due to bad RAM.  If you are uncomfortable installing RAM and you have a few extra laptop RAM of the same type (I think it's the DDR3 for your controller) laying around, you can try to replace the RAM.

  Was your hard drive damaged through certain events, or it just stop working?

• Satellite L40-143 - WLAN does not work with the new router

  WLAN on my Satellite L40-143 does not work since I Modem Alice-1121.

  Who can help me, please!

  Hi kenny_21,

  If you have a new WLAN router you must change the configuration that I think

  The new router is visible under WLAN connections and can connect?

  If so try to connect. The standard router password can be found in the manual of it and no doubt, there will be new addresses MAC first before connect you. I put t know the exact configuration.

  Also check the options the WIRELESS card with TCP/IP. Usually, you need automatic IP addresses.

• Windows 8 - recovery disks do not work with the new hard drive

  My HDD had major errors of io only 1 month laptop warranty. I can't clone the original disc, its dead. I'm relatively new to Win8 but I bought the factory HP recovery disks for my model and have tried repeatedly to restore the OS win8 without success even after support technical advice ofHP and several friends with more experience than me (and I got an A + cert for more than a decade)-I have no idea why he keeps fails. I ordered another set of discs and tried another new hard drive. The log shows all the hardware in the way and a sysprep not found error at the end. What Miss me?

  Problem solved! After another half-dozen recovery more attempts and lose more money on a new HP certified hard drive with the correct part number, I decided to give up Windows 8 and turn this laptop in a Hackintosh, I now on Mac OS X!  Microsoft has gone too far now, only not with the security of windows, instead of trying to make sure they get every penny they can from each PC running windows. His self defeat really. Those who cannot or do not want to pay the cost will simply find an alternative. I'm just tired of the headaches and of constantly having to spend my precious time proving that I have a valid OS license for every computer that I've updated or repair. Forcing people to buy the same item several times is aggravating and false. Sorry, just fan frustration.

• HP laserjet p1102w: wireless printer does not work with the new wireless network

  My office moved recently and we have a new wireless network. My printer always wireless worked perfectly on the previous network, but it does not work with the new network. I get a message "the printer is offline. I don't know how to reconfigure so that it detects the new wireless network. Can anyone help? Thank you

  Hi Shlomi,
  Thanks a lot for the info. I'll give it a try today...

• IR remote control does not work with the new imac

  IR remote control does not work with the new iMac. From 24 "2007 machine to last 27"

  Correct, because Apple no longer includes the IR sensor in newer models

• 128 - GB MicroSD card does not work with the new Clip +.

  My old Clip + (black, 8 GB) was getting very long in the tooth, so I ordered a replacement off Amazon.  As far as I know, it is identical to the old, but a very unpleasant difference is presented - it does not work with the MicroSD card which has been a huge part of why I got a Sansa at all.  He acknowledges, but after a media updated I'm lucky if more than one album appears.  And that's what's so crazy!  You just blow through the update in a few seconds, and when I navigate on the map, there is nothing or a handful of albums random, orphaned.  That's happened?  I updated the new Clip + for the current firmware (as I had done with previous); I made sure to reproduce all the parameters that I would be put in place before--I can't imagine what could be the cause!

  Treats quick closing:

  The card is formatted in FAT32 with the same sector size in storage aboard the player (32 768 bytes).

  A 64 GB card format works even without any problem.

  I tried to update the media in MTP and MSC mode; the problem is the same in both.

  There is ample space for MTABLE. SYS - I have not yet loaded all the music on the Clip + itself.

  Rockbox plays the card without problem, but the sound quality is horrible (at least on this player; I'm sure that other versions sound best), and its interface is a headache.  No thanks.

  HM.  Looks like to run CHKDSK /F on the map the problem resolved!

• Satellite C660-1NW - Webcam does not work with the facebook chat

  Hello

  My doughter recently bought a Satellite C660-1NW youcef.
  This laptop has a webcam on board.
  When you use Facebook, webcam chat, webcam does not work.
  The webcam indicator led is active come on, but the facebook app remains blue without screen webcam.
  Audio works.

  Skype using the webcam works.

  I have updated the drivers but when same no go :(

  Please help move facebook webcam

  Greetings,
  PP

  Hello
  If Facebook does not recognize your webcam right away when you want to share a video, click on the eye for cameras new button.

  Your Adobe Flash Player settings will be displayed.
  On the tab, make sure you only select the right type of camera you use with your computer.

  On the tab, you may also need to 'allow' Facebook to access your camera and microphone.

  If your settings does not work, try to uninstall Adobe Flash Player on your computer and download the latest Flash Player.

• Portege M200: Rotation utility does not work with the new driver

  Hello

  I have a Portege M200 with the Gforce 5200Go. Since the last officially available graphics driver is the 46,44 I changed the 93.71 and installed. But the Rotation Utility does not work with this driver.

  When I use the driver nv for the rotation of the screen the tabletpen's is more synchronized: move the tabletpen left results in movement of the mouse to the top etc.

  Anyone any ideas?

  Hello

  You must use the page of the Toshiba driver graphics driver and not the original on the graphics card manufacturing site

• Utility HP does not work with the new update of Mac software

  I downloaded the latest version of the software for my Mac and now utility HP will not work! Any advice? Thanks, Chris

  Hey Chris. Looks like you may have the old software out there which is not compatiable with the new version of Mac OS X. What I would do is a complete uninstall of the HP software you have. Let's try this:

  We will uninstall with the option 'raccoon' like this:

  1. go in Applications/Hewlett Packard / click on uninstall HP and click on continue

  2. Select your device in the left pane
  3. hold the keys Ctrl, Opt and Cmd and click on uninstall
  4. There will be a pop up that asks if you are sure you want to uninstall all hp software. (At this point, if you continue, all HP printers you have installed will need to be reinstalled)
  5. click on continue and let it finish

  Now run a software update. Before doing the next step make sure you connect your printer to the computer through USB. Then click on the Apple in the upper left corner of the screen, then clicking on software updates.

  If my instructions don't do because here's a little video to help out you:

• recovery disc will work with the new hard drive

  I have a HP Pavilion dm4. My hard drive died so I installed a new hard drive. The original operating system installed on the computer is Windows 7. I don't have a Windows 7 disc with the computer. If I order the Windows 7 HP recovery disk, it will install Windows 7 on my new hard drive? I got the info from COA. Thanks for any help you can provide.

  If the new hard drive is having even or a larger size than the old, recovery disks will reinstall the factory OS on your new drive.
  
  Thank you