Satellite L30 does not start after the upgrade to 2 GB of memory

Similar Questions

• Re: Satellite L30 does not start after adding another stick of 1 GB memory

  I bought 1 GB PC4200 533 MHZ DDR2 SODIMM memory module for my Toshiba Satellite L30 - 10v (PSL33E) to make it 2 GB. After you have added the 1 GB modules Satellite L30 wouldn't start. With only 1 GB, that it starts ok, with the other 1 GB origianal only boots ok. (The two modules are ZCE6 430 - K4T1G163QB Samsung 1 GB PC4200 533 MHZ DDR2)

  The two modules of 1 GB boot not together. I noticed that many others have had this problem. (please see
  This [t-22984]. post)
  On this forum, someone bought the CT12864AC53E memory module which works, however I can't find this on the site of Crucial.
  I've heard other purchase the sticks of memory CT572238 and CT572234 and have the same problems.

  Memory Advisor says determinative buy the CT572234 memory sticks.

  I have also updated the bios to V3.10, still does not start with the two modules.

  I'm ready to buy 2 new modules, but what 2x1GB memory works?
  Any help would be greatly appreciated...

  Post edited by: quigs1969

  > 1 GB strips boot not together. I noticed that many others have had this problem.

  For me it s case;
  The two modules don't work together
  Seems the modules are not compatible there is only one solution. Replacement of RAM!

  Try other RAM modules.
  I bought a few modules from Kingston and made good experience

• Satellite L30 does not start after the BIOS update

  Hello

  I upgraded my BIOS Satellite L30 and now the laptop will not boot. When I turn on the fan starts and that's it. I think I have updated the book with the bad BIOS... The laptop is only 1 day old... Is it possible to reset the machine to the default BIOS.

  Help, please...

  Hi Scott,.

  Unfortunately there is no easy way for you to go to your BIOS to its previous level. You need to entrust your laptop to a Service approved partner who has the necessary equipment to Flash the BIOS to the previous level.

  Kind regards

• Does not start after the upgrade to 1.5.

  Does not start after the upgrade to 1.5.  "EdgeAnimate.exe - not found entry Point? -Point procedure entry GetGestureInfo is not found in USER32.dll dynamic link library. »

  All ideas

  No problems in the past with edge since September 2012.

  =============

  Laptop HP Pavilion dv7-2185dx

  Dv7-2185dx product name

  #ABA product number NV023UA

  Microprocessor 2.00 Ghz Intel Centrino 2 Processor Intel Core 2 Quad Q9000 processor technology

  The microprocessor Cache L2 6 MB Cache memory

  6144 MB of memory

  Memory Max 8192MB

  Graphic ATI Mobility Radeon HD 4650 (M96)

  Video memory up to 2815 MB (1024 MB dedicated)

  500 GB (5400 RPM) hard drive

  Multimedia drive LightScribe SuperMulti 8 X DVD±R/RW with Support Double layer

  17.3 "diagonal HD + LED display high-definition HP BrightView Widescreen Display (1600 x 900)

  Fax/Modem high speed 56 k modem

  Network integrated 10/100/1000 Gigabit Ethernet LAN adapter

  Wireless Connectivity Intel WiFi Link 5100AGN

  The Altec Lansing SRS Premium Sound technology with subwoofer

  101 keyboard compatible with the keyboard keys full size numeric keypad with integrated

  Pointing device touch pad with On / Off button and dedicated vertical scroll up/down pad

  PC Card Slots 1 Slot ExpressCard/54 (also supports ExpressCard/34)

  External ports

  5-in-1 Integrated Digital Media Reader for cards Secure Digital, MultiMedia Card, Memory Stick, Memory Stick Pro, or xD Picture Card

  4 universal Serial Bus (USB) 2.0, 4th port shared with eSATA

  2 headphone

  1 microphone input

  HDMI

  1 VGA (15-pin)

  eSATA + USB 2.0

  1 RJ-11 (modem)

  1 RJ - 45 (LAN)

  expansion port for computer 1 cell 3

  1 IEEE 1394

  irewire (4 pin)

  1 consumer IR (remote receiver)

  Other devices HP Webcam with integrated digital microphone

  Dimensions 16.2 "(W) x 10.9" (D) x 1.37 "(min H) / 1.70" (maximum H)

  Weight lbs 7,74

  Housing for Kensington MicroSaver Security lock

  Turn on the password

  Accepts 3rd party locking safety devices

  Software

  Operating system:

  Genuine Windows Vista Home Premium 64-bit with Service Pack 1

  
  

  Hi, people.

  I was able to reproduce the problem here, so the good news is that you're not imagining things.  We are looking in the options right now for you guys, and I will contact you individually by private message to start again at the top.  This being said, please note that our techniques, Vista is an operating system that is not supported, and our team is not stable time on this platform.  We will do the best we can and we will keep you guys, update as to what status is.

  Thank you

  -Elaine

• Satellite M200 does not start after the RAM 4 GB upgrade

  Hello

  I recently updated my RAM just to speed things up a bit as RAM is so cheap these days.
  I have a MEAC M200 T2130 Vista with 1 GB sticks (2 * 512).

  The new sticks are 2 * 2 GB Dane - elec DDR2 pc2-5300, when I put the two and restarted the hard drive light came briefly and then it is just options BIOS of Idol, no POST.

  I tried to use a single stick of 512 MB with two new sticks and they both work in a 2.5 GB configuration just not together that also this only works when the stick of 512 is in internal housing and not vice versa.

  So if someone has had a similar prob or can give me some advice that would be great, I'm not sure if the motherboard can support 4 GB?
  Thank you, Dave.

  Hello

  There are two possibilities why your M200 doesn't not start after upgrading RAM.
  First the RAM installed may be not compatible or could be faulty or the computer laptop doesn't support 4 GB of RAM.

  I put t know what M200 do you have exactly, but you can check the installed chipset and could check on the Intel page if this chipset would support 4 GB of RAM.

  Welcome them

• Lightroom does not start after the upgrade to Windows 10, Version 1511, 10586

  Hi all

  After the upgrade to Windows 10, 1511 Version, lightroom 10586 CC can't be launched. Adobe cloud nor any link office or file system path to the files directly program. Lightroom.exe can be seen in the Task Manager for a second and then disappears to nirvana. No answer, no trace.

  What should do?

  standard things as uninstall - re - install, stop between the two, log out of the clouds - connect to the cloud, register of audit were made in several variants without success!

  Kind regards

  Robert

  Thank you hipolitorodrigues,

  your answer showed me the way. I found a solution more simple in a parallel thread, whose response brought back LR to life.

  CU, Robert

  8  re: does not start Lightroom CC

    

     Tanuj Sandal   14.12.2015 19:41 (als Antwort auf: antonk97314826)

  Go to the Panel, then programs and features.

  Please select Microsoft Visual C++ 2012, 2013, and fix it.

  Restart the computer and then let me know if the application works.

• vCenter does not start after the upgrade from 5.1 5.1 U1b (UNIQUE authentication failed)

  Hello

  We have upgrade to vCenter Server (build 880146) 5.1.0a to vCenter Server 5.1. U1b and now vcenter service does not start

  This is the log:

  2013 10-21 T 10: 58:40.221 + 02:00 [02800 info '[OSP]'] [UserDirectorySso] GetUserInfo (Administrators, true)

  2013 10-21 T 10: 58:40.221 + 02:00 [02800 info "[OSP] [SsoAdminFacadeImpl]"] [GetDomains]

  2013 10-21 T 10: 58:40.252 + 02:00 [02800 info "[OSP] [SsoAdminFacadeImpl]"] [LazyInitAdmin] initialization

  2013 10-21 T 10: 58:40.252 + 02:00 [02800 info "[OSP] [SsoAdminFacadeImpl]"] [InitSsoAdminServices]

  2013 10-21 T 10: 58:40.252 + 02:00 [02800 info "[OSP] [SsoAdminFacadeImpl]"] [CreateAdminSsoServiceContent] try to connect to the administration of the SSO server.

  2013 10-21 T 10: 58:40.330 + 02:00 [02800 info "[OSP] [SsoAdminFacadeImpl]"] [InitSsoAdminServices] successfully.

  2013 10-21 T 10: 58:40.330 + 02:00 [02800 info "[OSP] [SsoAdminFacadeImpl]"] [LoginToAdmin]

  2013 10-21 T 10: 58:40.330 + 02:00 [02800 info "[OSP] [SsoAdminFacadeImpl]"] [CheckTokenValidity]

  2013 10-21 T 10: 58:40.330 + 02:00 [02800 info "[OSP] [SsoAdminFacadeImpl]"] [CheckTokenValidity] refreshing SSO token...

  2013 10-21 T 10: 58:40.330 + 02:00 [02800 info "[OSP] [SsoAdminFacadeImpl]"] [RefreshSsoToken]

  2013 10-21 T 10: 58:40.408 + 02:00 [02800 error "[OSP] [SsoAdminFacadeImpl]"] AcquireToken [RefreshSsoToken] exception: failed authentication: authentication failed

  2013 10-21 T 10: 58:40.408 + 02:00 [02800 info '[OSP]'] [UserDirectorySso] GetUserInfo NormalizationException: RemoteGetDomainNames RuntimeServiceFault exception: sso.fault.RuntimeServiceFault

  2013 10-21 T 10: 58:40.408 + 02:00 [02800 error '[OSP]'] [UserDirectorySso] NormalizeUserName AuthException: allow exceptions

  2013 10-21 T 10: 58:40.408 + 02:00 [02800 error '[OSP]'] [UserDirectorySso] GetDefaultPrincipal AuthException: allow exceptions

  2013 10-21 T 10: 58:40.408 + 02:00 [02800 info '[OSP]'] GetDefaultPrincipal(, true) [UserDirectorySso]

  2013 10-21 T 10: 58:40.408 + 02:00 [02800 info '[OSP]'] GetUserInfo(, true) [UserDirectorySso]

  2013 10-21 T 10: 58:40.408 + 02:00 [02800 info "[OSP] [SsoAdminFacadeImpl]"] [GetDomains]

  2013 10-21 T 10: 58:40.408 + 02:00 [02800 info "[OSP] [SsoAdminFacadeImpl]"] [LazyInitAdmin] initialization

  2013 10-21 T 10: 58:40.408 + 02:00 [02800 info "[OSP] [SsoAdminFacadeImpl]"] [InitSsoAdminServices]

  2013 10-21 T 10: 58:40.408 + 02:00 [02800 info "[OSP] [SsoAdminFacadeImpl]"] [CreateAdminSsoServiceContent] try to connect to the administration of the SSO server.

  2013 10-21 T 10: 58:40.439 + 02:00 [02800 info "[OSP] [SsoAdminFacadeImpl]"] [InitSsoAdminServices] successfully.

  2013 10-21 T 10: 58:40.439 + 02:00 [02800 info "[OSP] [SsoAdminFacadeImpl]"] [LoginToAdmin]

  2013 10-21 T 10: 58:40.439 + 02:00 [02800 info "[OSP] [SsoAdminFacadeImpl]"] [CheckTokenValidity]

  2013 10-21 T 10: 58:40.439 + 02:00 [02800 info "[OSP] [SsoAdminFacadeImpl]"] [CheckTokenValidity] refreshing SSO token...

  2013 10-21 T 10: 58:40.439 + 02:00 [02800 info "[OSP] [SsoAdminFacadeImpl]"] [RefreshSsoToken]

  2013 10-21 T 10: 58:40.502 + 02:00 [02800 error "[OSP] [SsoAdminFacadeImpl]"] AcquireToken [RefreshSsoToken] exception: failed authentication: authentication failed

  2013 10-21 T 10: 58:40.502 + 02:00 [02800 info '[OSP]'] [UserDirectorySso] GetUserInfo NormalizationException: RemoteGetDomainNames RuntimeServiceFault exception: sso.fault.RuntimeServiceFault

  2013 10-21 T 10: 58:40.502 + 02:00 [02800 error '[OSP]'] [UserDirectorySso] NormalizeUserName AuthException: allow exceptions

  2013 10-21 T 10: 58:40.502 + 02:00 [02800 info '[OSP]'] GetUserInfo(, true) [UserDirectorySso]

  2013 10-21 T 10: 58:40.502 + 02:00 [02800 info "[OSP] [SsoAdminFacadeImpl]"] [GetDomains]

  2013 10-21 T 10: 58:40.502 + 02:00 [02800 info "[OSP] [SsoAdminFacadeImpl]"] [LazyInitAdmin] initialization

  2013 10-21 T 10: 58:40.502 + 02:00 [02800 info "[OSP] [SsoAdminFacadeImpl]"] [InitSsoAdminServices]

  2013 10-21 T 10: 58:40.502 + 02:00 [02800 info "[OSP] [SsoAdminFacadeImpl]"] [CreateAdminSsoServiceContent] try to connect to the administration of the SSO server.

  2013 10-21 T 10: 58:40.533 + 02:00 [02800 info "[OSP] [SsoAdminFacadeImpl]"] [InitSsoAdminServices] successfully.

  2013 10-21 T 10: 58:40.533 + 02:00 [02800 info "[OSP] [SsoAdminFacadeImpl]"] [LoginToAdmin]

  2013 10-21 T 10: 58:40.533 + 02:00 [02800 info "[OSP] [SsoAdminFacadeImpl]"] [CheckTokenValidity]

  2013 10-21 T 10: 58:40.533 + 02:00 [02800 info "[OSP] [SsoAdminFacadeImpl]"] [CheckTokenValidity] refreshing SSO token...

  2013 10-21 T 10: 58:40.533 + 02:00 [02800 info "[OSP] [SsoAdminFacadeImpl]"] [RefreshSsoToken]

  2013 10-21 T 10: 58:40.595 + 02:00 [02800 error "[OSP] [SsoAdminFacadeImpl]"] AcquireToken [RefreshSsoToken] exception: failed authentication: authentication failed

  2013 10-21 T 10: 58:40.595 + 02:00 [02800 info '[OSP]'] [UserDirectorySso] GetUserInfo NormalizationException: RemoteGetDomainNames RuntimeServiceFault exception: sso.fault.RuntimeServiceFault

  2013 10-21 T 10: 58:40.595 + 02:00 [error 02800 "Default"] cannot add the default permission: user not found

  2013 10-21 T 10: 58:40.595 + 02:00 [error 02800 "Default"] cannot start allow - system has no access rule

  2013 10-21 T 10: 58:40.595 + 02:00 [error 02800 'Default'] [Auth] initialization failed: < class Vmacore::Authorize:AuthException(Authorize_Exception) >

  2013 10-21 T 10: 58:40.595 + 02:00 [02800 error 'authvpxdAuthorize'] could not initialize security

  2013 10-21 T 10: 58:40.595 + 02:00 [02800 WARNING "VpxProfiler"] ServerApp::Start [TotalTime] took ms 27456

  2013 10-21 T 10: 58:40.595 + 02:00 [02800 info 'Default'] judgment of VMware VirtualCenter.

  Hello

  VMware support solve my problem:

  We have seen two issues after the update.

  First of all, there is no user of the solution for the virtual center when I checked the application users with SSO to the webclient service administration page.

  Solve us this problem of repointing Virtual Centre to the next according to the kb SSO instance;

  http://KB.VMware.com/kb/2033620

  1. repoint.cmd configure vc - search server https://vcenter.com:7444/lookupservice/sdk - password "laquesea" - openssl-path of the user "admin@System-Domain"-"C:\Program Files\VMware\Infrastructure\Inventory Service\bin."

  After that, the modules in the vpxd.cfg solution was not properly updated and an operation manual.

  C:\ProgramData\VMware\VMware VirtualCenter\SSL\sso.crt

  vCenterServer_251703

  C:\ProgramData\VMware\VMware VirtualCenter\SSL\sso.key

  Above is the corrected version having replaced "null" with the correct path to the files of certificate and key.

  This allowed vcenter service start successfully.

• Windows XP mode virtual machine does not start after the upgrade to Windows 10

  Hello

  After the upgrade to Windows 7 Pro for Windows 10 Pro, my virtual Windows XP machine (which was created from the "XP" mode in Windows 7) no longer starts.

  It shows:

  This system is not allowed to run "Windows XP Mode". Now, the virtual machine will be turned off.

  How can I activate the Windows XP Mode in Windows 10 Pro? I mean, I have not lost my right to run Windows XP Mode, just because I've upgraded to Windows 10, right?

  VMware Workstation 12.1

  Hello

  How can I activate the Windows XP Mode in Windows 10 Pro? I mean, I have not lost my right to run Windows XP Mode, just because I've upgraded to Windows 10, right?

  I fear that the statement is pretty much on the mark.

  Microsoft caught only supported XP Mode in Windows 7, it has been since Windows 8.

  See also:

  https://support.Microsoft.com/en-us/KB/2724115

  You might be able to extract the folder integer vhd it and import it in VMware Workstation as a separate virtual machine. In the end, 'XP Mode' just was running a virtual machine in your Windows 7 after all.

  --

  Wil

• My Xperia Mini does not start after the upgrade (flashing red), WHY?

  I just updated my Xperia Mini for Android 4 use Upadate Service, once the installation is finished the phone does not start, and instead of green light, red light flashing, WHAT should I DO?

  the indicator turns yellow/orange, if you are connecting to the carger wall?

  Don't forget to mark the correct answers & useful answers

• Pavilion DV6-2140ED: Pavilion DV6: 10 Windows does not start after the upgrade memory (4 GB-&gt; 8 GB)

  After I upgraded the RAM in my HP DV6 from 4 GB to 8 GB (2 x 4 GB Kingston KTA-MB1333 / 4G), Windows no longer starts. I get a blue screen and it keeps restarting.

  I think that the memory specifications are similar to the Samsung M471B5673EH1-CH9 original memory: Ghz 1333, non - ecc, 1.5 volts, case latency 9 etc.etc.

  It's a laptop DV6-2140ED HP with a processor Intel i5 - 430 m and Intel mobile chipset HM55.

  The bios detects 8 GB and it also passes the check/test of memory. As far as I know that I have also installed the latest bios firmware: F.1D. Reinstall my Windows 10 64 bit does not work either: with 8 GB I also get blue screens, after I try to boot my Windows 10 bootable USB drive.

  I read other people having the same problem, but I have not read a solution yet. What can we do about it?

  Hello:

  Please see this discussion.  You buy a very specific memory for any HP laptop with Mobile Intel 5 series chipset.

  http://h30434.www3.HP.com/T5/notebook-hardware-and-upgrade-questions/memory-upgrade-6550b/m-p/5340551/highlight/true#M207994

• Pavilion HDX 16: Windows 7 does not start after the upgrade to Windows 10

  Hello

  I have a system to dual-boot with windows 7 and ubuntu (with Windows 7 and NeoGrub Bootloader Windows Boot Manager).

  Recently, I upgraded from windows 7 to windows 10 via free upgrade offered by SM. However, I didn't like windows 10 and tried to upgrade to windows 7 by the following settings-> update of the security & -> Recovery-> Go Back to Windows 7.

  After the long process of decommissioning, cannot start windows 7 and the "Startup Repair" tool began to run. However, he could not solve the problem. Other recovery options 'system restore' and 'image system recovery' is not such that it could not find any restore point or the image created previously (I'm sure it were created before upgrade restore points).

  So, although I can boot ubuntu without any problem, I can't start windows 7. After the "starting windows" screen, I get the blue screen (a problem has been detected and windows has been shut down...).

  I intend to use the DVD to install windows 7 for repair, but

  (1) I don't know if I can boot from the CD because it is a dual-boot configuration

  (2) I'm afraid of losing work ubuntu OS.

  I appreciate if someone can help me find my Windows 7. I thank very you much for your time.

  Sorry, but there are a lot of reports on forums of Win10 the option of GoBack does not always work correctly.

  You should be able to boot properly from the same DVD of Win7 if you dual-boot with Ubuntu, but be aware, if the startup repair works (you may need to run three times), it will replace the link to start Linux in the MBR and after that, the machine starts immediately to Win7.  You will need to reinstall GRUB to get Ubuntu boot back.  You may be able to fix the boot of Ubuntu using repair boot: Boot-Repair - Community Ubuntu Documentation

• Firefox does not start after the upgrade: error code 2324

  I updated Firefox on my desktop running Windows 7 Enterprise (64-bit). Installer stub downloads and works through the installation, but does not automatically start Firefox. If I click on the link in the task bar, nothing happens. Same thing with that pinned to the start menu. If I go to the Mozilla folder and load Firefox from there, I get a message saying "Setup has encountered an unexpected error installing this package. This may indicate a problem with this package. The error code is 2324. »

  Hello

  Some Firefox problems can be solved by performing a clean reinstall. This means that you remove Firefox program files, and then reinstall Firefox. Please follow these steps:

  Note: You can print these steps or consult them in another browser.

  1. Download the latest version of Firefox from http://www.mozilla.org office and save the installer to your computer.
  2. Once the download is complete, close all Firefox Windows (click on quit in the file menu or Firefox).
  3. Remove the Firefox installation folder, which is located in one of these locations, by default:
     • Windows:
       • C:\Program Files\Mozilla Firefox
       • C:\Program Files (x 86) \Mozilla Firefox
     • Mac: Delete Firefox in the Applications folder.
     • Linux: If you have installed Firefox with the distribution-based package manager, you must use the same way to uninstall: see Install Firefox on Linux. If you have downloaded and installed the binary package from the Firefox download page, simply remove the folder firefox in your home directory.
  4. Now, go ahead and reinstall Firefox:
     1. Double-click on the downloaded Setup file and go through the steps in the installation wizard.
     2. Once the wizard is completed, click to open Firefox directly after clicking the Finish button.

  More information on the resettlement of Firefox can be found here.

  WARNING: Uninstaller or the use of Firefox and not run a third remover as part of this process, because who could permanently delete your Firefox data, including but not limited to, extensions, cache, cookies, bookmarks, personal settings and passwords saved. These can be recovered, unless they have been backed up on an external device!

  Please report back to see if this helped you!

  Thank you.

• Satellite A100 does not start after the BIOS update

  Hello

  I downloaded the update to the bios toshiba A100 PSAA8 on the toshiba site and applied using the procedure of updating the bios from windows XP MSE. Restart after the start of the update stopped at the toshiba start screen.

  At startup the screen by pressing ESC watch text mode. The message indicated it confirms the update of the bios version. POST messages are:

  _________________________
  Genuine Intel CPU
  No TPM or TPM has problem
  1015 M system RAM passed

  Press to enter in SETUP
  _________________________

  Pressing F2 just clears the last message in line and then no change is found.

  The laptop comes with windows XP media center edition. I don't know why the TPM secure is enabled. It is possible that toshiba is available with the module of TPM enabled in bios updates that logbook. If this is the case, they must clearly identified as 'not applicable' upgrade for machines that are not relevant.

  I found similar messages around the forum without convincing answer.

  Is it possible to fix this without sending? Even if it turns out to be affordable, it make much sense to pay for the problems caused by toshiba.

  Hello

  Please don t blame someone for you mistakes ;)
  As far as I know that only a few sets of laptops come with TPM.
  If you want to do an update of the BIOS on the models at TPM, you will need to contact the ASP!

  Looks like you used a bad BIOS or bad BIOS update procedure.

  The Toshiba page a BISO update the documentation that describes how to upgrade the BIOS on each series laptop!
  You will find on the page of the Toshiba driver compatible BIOS and information over a large number of details!

  > Is it possible to fix this without sending
  Don t think so, and therefore, you will need to contact the Asp help!

  Good luck

• XPS 8700 does not start after the upgrade memory RAM

  Dear members of the Forum.

  I have a XPS 8700 with the following specifications:

  Core i7 4770 k

  2 TB HARD DRIVE

  16 GB of Ram (4 x 4 GB)

  NVidia GTX 660 (1.5 GB)

  BIOS version A10 (later).

  RAM sticks in my current system are all Micron Tech (here) 4 GB DDR3 SDRAM PC3 12800 240pin 1.5V 1600 MT/s.

  I had two RAM modules of tech Micron (here) 8 GB DDR3 SDRAM PC3 12800 240pin 1.5V 1600 MT/s so that I can move on to a total of 24 GB.

  After the discussion here and here, I installed the modules in slots 1 & 2 (both white) so that the system is not able to start. Not even got the bios screen. I also tried 3 & 4 configuration (both black) I ran my computer with the two 8 GB sticks only, with the same unfortunate results.

  I also saw that it is a normal problem of compatibility problems between the types of ram, but I consider that this is not the case. In addition, bad positioning of the modules is not also the case because if I put my old ram glue the computer starts normally.

  I used tape you will static isolation.

  Is the problem, a problem of compatibility between my computer and the RAM modules?

  If the RAM is damaged does these effects (do not start)?

  How can I check if the RAM modules are damaged?

  What would be your suggestions?

  I thank very you much in advance!

  Mauricio

  Hmm, I'd say you two bad sticks of RAM.  If the system POST even with them, I would swap them if you can.  We know that the RAM slots work because you have 4 x 4 sticks without any problem and your computer can take up to 32 GB of RAM.  Your admission that you bought the right kind of RAM, voltage, and speed, etc., so that shouldn't be a problem.  I would say as bad RAM.  When you do not install, just check that you make pairs in each of the colored slots, for example. matching pairs in the slot of white and black.

• Lightroom 6 (not CC) does not start after the upgrade of the LR5

  Hi, first of all, I don't use CC.

  I upgraded my copy of Lightroom 5.7 last week and used LR6 for about 2 days before this problem started. I opened LR6, the splash screen appears and nothing else happens. The Task Manager shows LR6 does not, and no amount of lift tasks or reboots gets my open catalog.

  I uninstalled LR6, then reinstalled. It seemed to work, but only the first time I opened my catalog. I tried again, the upgrade of my old catalog again, but the same problem. It's been a week later, I'm still not able to use LR6 and would like to know what the problem is. I have no intention to move towards CC either.

  I'm on PC, i5, 8 GB of RAM, NVIDIA GTX 660 video card. I moved my catalog of a second disc on my c:. My photos are on a third internal drive.

  I've never had a problem with previous versions of Lightroom like this before. In addition, my cpu is overclocked to 3.4 GHz to about 4 GHz. I have normally no crashes or programs not responding.

  can anyone help?

  Thank you

  We got your back, right on the first page of this forum!