Satellite L30 recovery disk failed: could not do language input error

I have a L30-101, which has been slow to turn on. Another forum suggested going in ms config to ensure the maximum memory used to initialize and uncheck that some elements to start. When I rebooted, windows icons have been expanded and slightly blurry, so I undid the changes I did but windows is still not clear. The laptop works well otherwise, so I recorded that restore data, I needed and tried a system, but the computer can't find any restore points.

As a last resort, I tried the Toshiba product recovery disk which I had never used it before. He begins to read it ok, then asks for the choice of the English language. About 10 minutes later it stops with the error message "could not get a writing of the language of the INI file! Article: [Commom] key InstallCMD file D:\Setenv.ini.
When I hit OK to clear the message the Administrator page says could not initialize the raid class no RAID-continue normally.

When I restart the laptop it brings back me to my previous state with blurry icons, another way to work laptop and all my old data is still there.

I have since bought a new portable Satellite L450D that I write this, but I'm eager to try to lift my L30 and working again as a spare. I contacted Toshiba UK in case there was a problem with the recovery disk, but due to licensing issues they can only redirect me to the support of EU toshiba backup site to buy a new recovery disk. As I already have a recovery disk, I don't want to buy another for the same results. Does anyone have ideas on how I could get the recovery disk to load entirely and recover my laptop to its factory settings?

At first, I must say that you should back up all your important data to an external device like external HD or USB. When you use the recovery facilities disc all the partition is deleted.

I don't know why you cannot use livery recovery disk, but the only thing to do is to visit nearest Toshiba authorized maintainer and show the problem. If they can confirm recovery DVD is defective, I assume that you will get a new free of charge.

Tags: Toshiba

Similar Questions

  • Satellite C660 - recovery disk fails error 1117

    Please can someone help. I tried to use my recovery disks to restore my laptop when it kept not start correctly. The disks did not work so I bought a set of discs from Toshiba on this Web site. I still have the same problem.

    What the failed hard drive or something else?

    If I buy a new hard drive recovery disks will work if the hard drive is not exactly the same as the one that is out?

    Hello

    Have you thought about the HARD drive?
    It could be a malfunction of the HARD drive that does not allow you to install the system.

    I recommend that you check the HARD disk for some potential problems.

    There is a nice tool called Drive Fitness Test. You can use it to check the HARD drive.
    Google simply to get the software.

  • Toshiba Recovery media fails could not open e\boot\bcd

    I'm running the toshiba create recovery media on my satllite pro c660 - 21 d as my first job

    It askes for 2 dvd discs
    the use of new discs it failed with
    Could not open e\boot\bcd
    020123 f1-00000000
    I tried another disc, but if it does not work what then?

    Update

    The replacement drive was created without error must therefore have been a media failure

    but hope this helps someone else

    Post edited by: kenny825507

    Thanks for the comments. :)

  • Satellite M100 recovery disk failing after loading ramdisk image

    Hello world

    I have a Satellite M100 (bought mid-2006), 512 MB RAM, 60 GB HDD, Intel CPU T2050.

    I decided to have a cleaning and use the restore disc to return the laptop to factory settings, and then reinstall only what I really wanted.
    I had this done yesterday, I had forgotten something, then he ran again about 4 hours later.
    The first time that the restore worked, now it reboots once the progress bar reaches full when he says "Loading RAMDISK Image".
    After the progress bar reaches full, the mouse pointer appears for a few seconds then restart the computer.

    Nothing has changed with the hardware or BIOS, and what is on the HD should not have any effect because I am booting from the DVD.
    Can someone please help? I am at a loss to explain what happened in this interval of 4 hours.

    Thank you

    Hello!

    I agree with Akuma.
    Sometimes I can read here on this problem and I know you should only remove the partition on the HARD disk. Therefore, you can also use a Windows XP CD from Microsoft or the FDISK utility.

    After you delete all the partition, you should be able to run the recovery disk.
    Check it!

    Good bye

  • "Secure Erase fresh space failed - could not create temporary file ' error message - help!

    I have an iMac 10.9.5, and I get the following error message when you delete the free space using disk utility: "erase secure, free space failed...". Failed to create temporary files. "Because the program had worked for about 2 hours before the error message appears, I wonder if at least some of the empty space was in fact deleted.  All comments or suggestions would be welcome. Thank you!

    The process creates a temporary file in which all deleted files are archived until completion. The error means generally that you had ran out of disk space or the temp folder is corrupted.

    Why are you doing this? It's a waste of time beast not to mention the risk of damaging the entire disk. Finally, he was abducted as a system with the release of El Capitan option.

  • Satellite Pro A10 recovery disks fail to reinstall Win XP

    My A10 Pro Sat operated happily running a system dual boot (XP and Mandriva) before a failure to start a day.
    I've successfully used the Toshiba recovery disks and everything was OK for a year or two before the same problem reappeared.

    Now the recovery disk Nr.1does not restores the system and the laptop turns off after appearing to run normally for about 20 seconds.

    Restore the MBR and fitness by using a recovery disk Win 98 could not solve the problem.

    Anyone has any ideas please?

    > Now the Nr.1does recovery disk does not restore the system and the laptop turns off after appearing to run normally for about 20 seconds.

    Sorry, but this sentence confuses me. What you mean under function normally? Start your laptop computer, enter BIOS settings and leave it with that. Laptop does turns off after a short time or what?

    Maybe you should explain a little better what happens when you start your laptop.

  • Windows error recovery. Windows could not start... _

    My Dell laptop I have from 10th July indicates the following:

    Windows error recovery

    Windows could not start.  A recent hardware or software change might be the cause.

    If windows files have been damaged or misconfigured, Startup Repair can help diagnose and fix the problem.  If the power was interrupted during startup, chose to start windows normall7

    Start the reboot system (recommended)

    Start Windows normally

    The two options to return to the same screen.

    I tried the menu under the F keys, but all options listed do not seem to do anything.  I talked to Dell who ran a diagnostic test on the portable equipment and everything was ok.  They wanted then £70 the issue above which I am unhappy that have not had the laptop for a year yet!

    I would be very grateful if you could help!

    Thank you

    Mark

    Hello mtb123,

    1. have you tried the steps suggested by Srinivas R in the previous post to make a startup on your computer repair using the Windows installation disc?

    2. you remember what changes you made to the computer before you start this error?

    I suggest that you access the system recovery options using a Windows Vista installation disc and do a startup repair and if this fails, you can do a restore of the system from the Windows recovery environment.

    You can see the previous post of Srinivas R to verify the information on the system restore.

    http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

    Thank you
    Irfan H, Engineer Support Microsoft Answers. Visit ourMicrosoft answers feedback Forum and let us know what you think.

  • Failed: Could not find the system volume, reconfiguration is not possible

    Hi all

    When converting to a Server 2003 server to server ESXi 6.0.0 I received this message after all 96%.

    (FAILED: could not find the system volume, reconfiguration is not possible. ) )

    I use VMware vCenter Converter Standalone 6.1.1

    Anyone encountered this problem and found a solution?

    The log file is attached.

    Thank you very much!

    Terence

    Your problem is:

    2016 05-18 T 11: 09:48.300 + 08:00 WARNING vmware-converter-agent [02332] [sub Originator@6876 = Default] ERROR: [Mntapi_GetFirstBootDisk] more than * a * found active volume. Current active drive #0, another active drive #1

    Go to diskmgmt.msc and diskpart.exe and delete active indicator second disk/partition 1

    Also, keep in mind that mount point C:\backup\Ext\ is not copied.

    HTH

  • (95%) FAILED: Could not find the system volume, reconfiguration is not possible.

    Hello

    I'm trying to virtualize a physical machine to my VMware infrastructure. I success to another machine, but this time it crashes.

    Here are the features:

    Software: Client VMware Converter standalone 4.0.1

    Machine: Microsoft Windows Server 2003 Enterprise with Exchange 2003 SP1

    Disks: 2 * 80 GB drives used in RAID 1 software mirror (2 partitions C: & D: cross the two discs)

    VMware farm: ESXi 4.1

    Configuration of the converter: http://image.bayimg.com/faackaadc.jpg

    I try to convert the machine but I get the following message "FAILED: could not find the system volume, reconfiguration is not possible." 95 per cent at the stage of reconfiguration (he create only a single vmdk).

    My research, it is likely due to software mirror, implying to dynamic disks.

    But I must not modify the physical machine, I have to migrate the computer because it is unchanged.

    A machine appears in vCenter. When I started it, it does not start. With QParted, I activated the flag of "boot". Now the machine starts, but I immediately get a blue screen even in safe mode. ( http://image.bayimg.com/faacaaadc.jpg )

    I've added the vmdk to another machine, and run diskmgmt.msc to convert dynamic disk to basic disk, but he saw disc base already.

    Initial configuration of the drives here: http://image.bayimg.com/eaacoaadc.jpg

    Attached files: boot.ini and newspapers

    What can I do to convert my machine?

    Thank you and sorry for my English

    =====================================================================================================

    Hello

    I try to virtualize a physical machine to my VMware infrastructure. I successful already have to pay another machine, but it it crashes.

    Here are the features:

    Software: Client VMware converter standalone 4.0.1

    Machine: Microsoft Windows Server 2003 Enterprise SP1 with Exchange 2003

    Disks: 2 80 GB drives used software mirror RAID 1 (2 partitions C: and D: cross on two discs)

    VMware farm: ESXi 4.1

    Conversion of configuration: http://image.bayimg.com/faackaadc.jpg

    I try to convert the machine but I get the following message "FAILED: could not find the system volume, reconfiguration is not possible." 95%, stage of Reconfiguration (it has created only a single vmdk).

    According to my research, it is probably due to the software mirror, which created from dynamic disks.

    Alternatively, in I am not touching the physical machine, I have to migrate the machine what without changing.

    A machine appears well in vCenter, when I start, it does not start. With QParted I activated the 'boot' flag The machine boot now, but I get a blue screen immediately, same en safe mode. ( http://image.bayimg.com/faacaaadc.jpg )

    I added the vmdk on another machine, with diskmgmt.msc I wanted to convert the dynamic disk to basic disk, but he was already seen as a basic disk.

    Here is the initial configuration of the discs: http://image.bayimg.com/eaacoaadc.jpg

    What can I do pour machine to convert my?

    Thank you

    Have you tried

    Try the option "set up the machine" of the converter against the vmx file that you already have.

    _________________________

    VMX-settings- WS FAQ -[MOAcd | http://sanbarrow.com/moa241.html]- VMDK-manual

  • Could not load the 3.6 - disk image could not mount - reason: corrupted image

    Tried to load 3.6 and get the msg: disk image could not climb. Reason: image corrupt.

    This has happened

    Each time Firefox opened

    Versions of Firefox 3.0 + need Mac OS x 10.4 or higher.
    What version do you have?

  • Defragmentation - "Disk Defragmenter could not start.

    When you try to defragment I get a message "Disk Defragmenter could not start.

    Hello AndyO12,

    Often, we see crashes as a result of a program from loading at startup.

    To solve these, we use the clean boot troubleshooting.

    The following describes this process:

    http://support.Microsoft.com/kb/310353

    http://support.Microsoft.com/kb/316434

    Best regards

    Matthew_Ha

  • When turning on pc and when the acer logo appears it asks to enter the current password, I bought the recovery disk but do not get a chach to enter the bios

    When turning on pc and when the acer logo appears it asks to enter the current password, I bought the recovery disk but do not get a chach to enter the bios

    This looks like a utility Acer protect disk hard & possibly also the BIOS.  You will need to consult your manual for Acer.  You have configured a password of HDD that you are now trying to recover, by chance?  This recovery is not possible if the hard drive has been password protected.

    If it was a Windows login screen then it would show your user/admin name and password entry area & would be clearly identified as a Windows form of the version of Windows being displayed at the bottom of the screen.

  • Browsing databases of Virtual Center failed: could not connect to server NFC, can any body help me how to solve this problem please

    Browsing databases of Virtual Center failed: could not connect to server NFC, can any body help me how to solve this problem please

    Hi Mallik7, please try the following steps, you must succeed to solve the problem.

    To connect a client to vCenter directly to the ESX host error-free work.

    Files/etc/vmware/config the ESX host contain the lines:

    ------------------------------------

    authd.soapServer = 'TRUE '.

    prefvmx.consolidateDeleteNFSLocks = "TRUE" authd.proxy.vpxa - nfc = "vmware - vpxa:vpxa - nfc.

    Authd.proxy.vpxa - nfcssl = ' vmware - vpxa:vpxa - nfcssl.

    ------------------------------------

    This problem occurs when a carriage return is missing from/etc/vmware/config. To resolve this issue, go to edit/etc/vmware/config:

    1 make a backup of this file from the path - / etc/vmware/config, by running the following command:

    CP/etc/vmware/config/var/tmp /.

    2. edit/etc/vmware/config so that there is a return transport after the line:

    prefvmx.consolidateDeleteNFSLocks = 'TRUE '.

    While he reads the following:

    ---------------------------------------------

    authd.soapServer = 'TRUE '.

    prefvmx.consolidateDeleteNFSLocks = 'TRUE '.

    Authd.proxy.vpxa - nfc = "vmware - vpxa:vpxa - nfc.

    Authd.proxy.vpxa - nfcssl = ' vmware - vpxa:vpxa - nfcssl.

    ---------------------------------------------

    3. restart the management agent spend.

    Note: Make sure that you are not in your environment name resolution problems.

  • I downloaded an option, but he says "the following disk images could not be opened-, image not recognized."

    I downloaded the software, but he says "the following disk images could not be opened - image not recognized."

    Please see:

    unrecognized image

    Re: Problems with CS6 Master Collection disk image

    I hope this helps.

    Concerning

    Megha Rawat

  • Vista - FAILED: could not find the system volume, reconfiguration is not possible.

    Hi, someone would be able to look at these newspapers please and advise, new to VM and trying to convert my old Vista PC before migrating fully to Windows 7, but its failure to 96% with "FAILED: could not find the system volume, reconfiguration is not possible." error.

    Thanks in advance, Dave

    Make sure your username is Administrator and UAC disabled on your Vista machine. HTH

Maybe you are looking for

  • Brightness adjustment T510i jump steps

    I just did a clean install of W7 64 bit and have updated all drivers using the system update 5. My problem is that controls brightness that used to the range of 0-15 now make big jumps in low light levels. For example before I could choose 0-1-2-3-4-

  • Help? Need a recovery for dv6208nr disk...

    Where is a download of the recovery media for a dv6208nr with windows vista home premium x 86? Someone who can download it to jump in parachute or another accessible place for me? I'm very grateful for any help. Thank you. /

  • All messages sent to or forwarded are recorded in the OUTPUT box in sent box

    Correction... All messages sent or transmitted Gets an error message but no message appears, then it passes in the Outbox. I then have to remove the error message and highlight the Outbox and delete the mail...

  • Windows Media Player doesn't recognize DVD

    Windows Media Player will recognize is more DVD - it opens with a black screen and then stops. However, it will play CDs and videos from internet and attached to e-mail. It will also burn videos to DVD. All the drivers are up to date. What is the sol

  • Windows vista Theme it's not uninstall and safe mode does not work

    I try to uninstall the windows vista theme, but it is not uninstalled. A black screen is coming, and it is disappearing. I also try to uninstall the theme of windows vista by creating my new account, but it is not uninstall same problem is coming. I