Satellite L30 - very small screen

Similar Questions

• Satellite L30-134 - fail screen

  Hello!
  Hopefully, someone can help me with my problem.
  I had one laptop Satellite L30-134 and had no problem with it. But today tried to move on and the screen lights up. I can hear the winchester and cooler work for a min then stop.
  A few months ago, I had the same problem, but he left about an hour later.

  So, can you tell me what can be the problem and how can it be solved?
  Thank you
  Eniko

  Which may be caused by several reasons.

  Have you tried re-seats or try different Modules of memory?

• Re: Small screen on Satellite L350

  Can Hi anyone help?

  When I start my toshiba Satelite L350, I get a black screen followed a very small screen, and after a time of each button, everything goes back to normal.

  Since when have you noticed such behavior?
  What do you mean with low screen?
  Can you send a picture?

• Transmision very slow Satellite L30 - 113 (33rd PSL) LAN file

  Hello world!

  After upgrading OS from Vista to XP pro work LAN Ethernet very slow (transfer of files of 100 MB, 2 hours).

  XP-drivers downloaded from toshiba - Europe.com, for model Satellite L30-113 PCL33.

  Maybe I should applay patches?
  Also I can't use the PC card slot...

  Hello

  The transfer of data should be the same under Vista and XP.
  I think that you have installed an antivirus that scans all files during data transmission.

  Please disable it!

  By the way;
  If you notice a slow, data transfer Windows Vista try disabling Remote Differential Compression
  To do:
  -Start-> Control Panel-> programs and features
  -Click on Turn windows features on the left side of the screen on or off
  -Off remote differential compression

• Satellite L30 - 10Y black at startup the screen upward after the installation of new modules of RAM

  Hello

  I use the L30 - 10Y model with the following memory specification:

  standard: 512 MB
  maximum scalability: 2 048 MB
  technology: DDR2 RAM (533 MHz)
  expansion module sizes: 256, 512, 1 024 MB

  I use Windows Vista Home Basic Edition with a 32-bit operating system.

  When installing, I removed the standard 512 MB module and added 2 modules of 1 GB compatible. At startup, it stays on a black screen.

  However, if I removed 1 1 GB modules and put the old 512 MB module to give me 1.5 GB, it works.

  I was wondering if anyone knows why this is and if there is anything that I can try to get the maximum of 2 gb, if it is indeed possible.

  Thanks in advance.

  According to the product page Toshiba Satellite L30 - 10Y is able to manage 2 GB of RAM (2 x 1 GB)
  I think that the problem is related to memory modules not fully compatible
  I think a new, fully compatible RAM modules should resolve this problem.

  PS: You updated the BIOS? If this is not the case, check if a new update of the BIOS is available on the European driver Toshiba page.

• Satellite L30-10T - downgrade after XP is very slow

  Hello

  I downgrade my Satellite L30-10T from Vista to XP Pro SP3 and I installed all the drivers, but I have some problems:

  All control systems are very very slow, is not possible to switch-off order XP, install new programs is slow...

  Thank you

  Hello

  You have yellow exclamation marks in Device Manager?

  On the Toshiba site I founded an installation instructions document. Did you follow this order of installation for all drivers and tools?

  Also please check if Device Manager you have enabled DMA mode for the primary and secondary IDE controller.

• Satellite L30 - 11 d - how to exchange the screen?

  Hello

  I need help to change the screen on a Satellite L30 - 11 d. I accidentally pressed the screen that has a large black spot on him.

  Everything can show me how to change the screen with a new one please?

  Hello

  Unfortunately, you won't find manuals or on the pages of Toshiba disassembly instructions.
  I think that these instructions are made for service technicians only and are not for public use

  In any case, I think there is a lot of information on the internet and I think if you really need this info, then you should google a bit.
  But once again; It s always best to ask a technician for aid of the disassembly procedure is complicated and there is a high risk of damage this part.
  In the worst cases, damage another essential element which would be too expensive.

• Satellite L30-115 - broken TFT screen

  HY!

  Question:
  The l30-115 lcd screen broke.

  Details:
  -laptop was not abandoned.
  -L' darkness is uniform.
  -Everything turns good, meaning, you can see the loading of the OS in the background.
  -Works fine on the external monitor (FN + F5)

  Already tried:
  -Replace the connectors.
  -Tested the ups with another exhibition (14.1 "another brand) - result: the backlight fine firred_up.
  -Tried an other inverter (exact model), same result.

  My conclusions:
  -The backlight of the screen is broken. Should change.

  Problem:
  I don't have a backlight for the same exact model to display. I find order in my region.

  Question:
  Find similar backlight (toshiba tecra 8200 14 in.) for 10 euros. Can I use in my model?
  I also read that the backlight switch may be stuck. I couldn't find it on this model. Should I use a magnetic sensor?

  Any help is be apreciated
  PS: Tried to post this message to about 50 times

  Post edited by: micro_2

  > I don't have a backlight for the same exact model to display. I find order in my region.
  I assume you mean display
  Well, you can order all the compatible parts of the ASP from Toshiba in your country.
  But the new part of the display is expensive

  > Found similar backlight (Toshiba Tecra 8200 14 in.) for 10 euros. Can I use in my model?
  Well, the L30 was equipped with 14.1 TFT WXGA display.
  I think that the 14 could be too small for the L30. But this is only my assumption

• Satellite L30-101 - Vista will not start all I get a black screen

  Hey can any help me please I have a toshiba satellite l30-101 (PSL33E) with windows vista basic hoe

  I was updating my BIOS on toshiba website and while he was installing the battery has been disconnected and when I turned on my computer laptop back I got was a black screen, the fans would start and thecd rom would turn

  Ive triyed al the keys F and all the FN keys to bu that nothing would happen that also, I tried an external monitor and the same thing I got nothing on the monitor is a black screen then when I disconnected the mnitor a blue box would come on the screen saying no video input please attatch cable

  allsoo ive tried running the recovery disc, I put the cd in the CD-ROM drive would begins to spin, but nothing would happen that I tried all the F keys while the disc was running, but still nothing would happen

  could sumone if you please help me

  Post edited by: garethg83

  > I was updating my BIOS on toshiba website and while he was installing the battery has been disconnected and when I turned on my computer laptop back I got was a black screen, the fans would start and thecd rom would turn

  I m afraid the BIOS update has no procedure and therefore the ROM chip has not updated as it should. This is the reason why the laptop can not start correctly.

  I think that it of necessary to reflash the ROM BIOS module Once again, but this can be done only using a procedure of BIOS of crisis.
  As far as I know this can be done only through ASP because there is no traditional BIOS version by download.

• Blue screen when you use the CD/DVD on Satellite L30-105 player

  I have a Satellite L30-105. Recently when using the CD/DVD drive, it began to crash (blue screen) after playing a DVD-video or a music CD.
  Either way, I seem to only get playback of DVD-video and not the main sound track. Does anyone have an idea what may cause these errors.

  Hello

  To my knowledge, the blue screen starts if there is a serious software problem or if some of the equipment is malfunctioning.
  I put t believe that this blue screen error message can be caused by a defective CD/DVD drive.

  Hmm, according to your message and you can not hear the main sound and cannot read music CDs, I think that this problem could be linked to the sound card.

  In the first case I recommend updating the audio driver. If this does not help, try to recover the laptop with the supplied recovery CD and check if the same thing always happens on the new BONES recovered. (Don t install any 3rd party application).

  Good luck

• Re Windows XP: At the opening of the hearts, the window is very small. How can I increase the window to fill the screen. Double click on the top panel does not work.

  Re Windows XP: At the opening of the hearts, the window is very small.   How can I increase the window to fill the screen.   Double click on the top panel does not work.

  Hi Rosa,.

  The size of the window for Hearts is actually design in Windows XP.

  However, there is a solution. You can follow these steps:

  
  Step 1

  a. first of all, copy the game.

  b. click Start, all programs, games.

  c. right-click on the game of hearts .

  d. Select Properties from the list.

  e. press the button find the target on the next window.

  f. right click on the highlighted file and select copy.

  g. then paste the copy on your desktop.

  h. right click on your desktop.

  i. Select Paste from the list.

  Step 2

  Finally, we will change the resolution for the game setting:

  a. right click on the game you just pasted on your desktop.

  b. Select Properties from the list and click the Compatibility tab.

  c. put the check box marked "run in 640 x 480 screen resolution.

  d. now whenever you want to play, click on that game on your desktop and it opens in mode full screen using the widest possible cards and numbers.

  Hope the helps of information.

• My screen has changed to very small, sites Web can't it up full screen to use all functions

  My screen laptop changed to very small fonts.  During the implementation of Web sites, they are not displayed in their entirety, it is impossible to use functions such as the following screen, etc.

  Hello

  Press CTRL + mouse scroll upward & scroll down to increase or decrease the police. It will solve your problem

  Good luck!

  Chandrasekar.J

• 4 K screen with very small windows and characters.

  I got a new laptop 11/28. It came with a 4K screen most of the windows are very small and don't have a resolution that I can fix it. Most of the things are too small to read. Help, please! I have an Inspiron 15 7000 Series 7559. Please leave in the comments of a response or if you need more information.

  Hello

  I'll have the excat same problem as you with the laptop same exact, I was chatting with windows and dell customer service and neither can help. It's very frustrating because this isn't a laptop not expensive. I found a fix for it sorta, but that means that you do not use the resolution settings is recommended, so your not get 4K screen you paid for personally for me is not immediately, so a solution to this problem would be greatly appreciated from Dell.

• Satellite C70D-A-117 swites of lots of small screen game FB

  I play games on Facebook and my laptop switches in the middle of the fashion game full screen on the small screen, I don't want to!

  How the hell can I stop this nuisance?
  It is also as slow as molasses...

  Anyone know how I can fix this problem?

  Have you noticed this kind of behavior of some activities like watching movies on videos on You Tube?

  Slow? Before you start to play game power change plan execution and close all unnecessary background options.

• The small screen on my Satellite M size

  Hi you all, AIDS.

  About the smaller screen size, it's all the time when I use it. Now, I can increase to full size by as I said clicking on display then full screen. But when I start my laptop again after the judgment or the closure of the window I was using at the time of the window of the screen returns to the small about 1/4 inch all around.

  I just can't keep it permanently.

  Why you open a new thread on the same topic?
  Please continue the discussion here:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=21028