Satellite L300-1 has 3 - not 100% battery overnight

Hello

I recently bought 'L300-1 a 3' satellite that always work by the AC electricity.
When complete my work and turn off, unplug the power, but overnight when start, remaining battery power is less than 100% (e.g. 97%).

Is there a problem with the battery?
Battery name: PA3534U-1BRS
Unique ID: 4070PA3534U-1BRS
Chemistry: Li - i

This behavior is normal and there is nothing unusual. On this forum, you can find enough discussion about this.
Anyway check it please follow the documents:
http://APS2.toshiba-tro.de/KB0/TSB6B01MY000WR01.htm
http://APS2.toshiba-tro.de/KB0/TSB6B01N50013R01.htm

There is no reason to panic. I noticed the same thing on my notebooks.
Good bye

Tags: Toshiba

Similar Questions

  • How to connect by Satellite L300-1 has 3 on TV?

    I have laptop Satellite L300-1 has 3, and I can not show pc image to screen LCD TV Philips 5603d.
    I tried with the vga (pc) in RGB (TV) cable and with connector vga, DVI and DVI to HDMI on the side of TV, but nothing happened. Is it possible to see the image on the TV?
    I need software for that, or I did something wrong?

    Thank you!

    Hello

    All LCD televisions have several video - in different ports and what you should try is to use the VGA-to-RCA cable.
    Your TV must have port cinch. Connect your laptop to the TV, turn on RCA TV port and then use FN + F5 key combination to switch the LCD TV.

    Please let me know if this work.

  • Satellite L300-1 has 3 - slow start WinXP SP3

    Hello everyone

    Recently, I installed Windows XP (service pack 3) on my laptop * Satellite L300-1 has 3 (Dual core T3200, 3G of RAM) *.
    There is a problem: starting time on the computer and enter in Windows is too long (about 60 seconds)
    I have not any application on my laptop, and I didn't have this problem when it had Windows XP (service pack 2)
    Would you please help me on why this problem exists?
    Thanks for your cooperation!

    You must determine what is the cause of the delay. It could be a driver incompatibility.

    Google "Bootvis". Its a Microsoft utility that records everything that happens during startup and displays a grid with delays in the services, drivers, peripheral, etc...

  • Satellite L300-1 has 3 and WXP - computer laptop is very slow

    I installed Windows XP computer laptop Satellite L300-1 has 3.
    After portable installation is very slow, I think that the problem in the SATA driver.

    Please send me the driver SATA for Windows XP Home edition, or please give me the solution.

    Thank you

    Hello

    May I ask how you installed Win XP?
    Did you change the SATA mode on compatible in the BIOS settings?
    If yes then this problem is related to the missing SATA drivers!

    You can find the SATA drivers in the Intel Storage Manager which is placed on the page of European disk from Toshiba!

    Launch the .exe with the settings file a p

    For example (the files will be unpacked in the storagemanager folder):

    c:\downloads\iata_cd.exe - a c:\storagemanager Pei

    An accurate description, you will find in the Readme! Read it!
    Then you will get the unique file which could be included for Win XP CD using nLite software!

  • Satellite L300 (PSLB8C-0H901X) does not work

    My laptop Toshiba Satellite L300 PSLB8C-0H901X, does not work, no power, no MESSAGE, nothing, lamp power and charge Get when pluged into anything else, any known issues? All the fixes, thank you in advance for your help.

    Of course, your laptop is completely dead. In such situation, there is no magic solution and I m afraid that you need professional help. If there is absolutely no reaction is maybe defective electronic power supply and the motherboard must be exchanged.

    As you know this is part more expensive so you need to check if this is the solution for you.
    Call, explain the situation and let it check your laptop.

  • Satellite L300-1 has 3 - need some drivers

    Hello
    I need help to install a * SM BUS controller * and a * Signal Processing controller and PCI data acquisition * for my computer laptop Toshiba Satellite L300-1 has 3.
    I have a processor intel T3200.
    Help, please.
    Thank you.

    Hello!

    What operating system (operating system) do you have?
    Have you used the recovery disk?

    You can find all the drivers on the Toshiba site:
    http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

    Good bye

  • Satellite L300-1BD - output does not work VGA

    Hello.

    I have a Toshiba Satellite L300 1BD (model PSLB8E). I've been usinng the VGA output to connect to my LG tv. It worked fine until last week. All of a sudden the TV won't not reckognized by cell phone. TV says no external device is connected. I tried different things: commissioning with the TV connected and not connected via the VGA cable, by pressing the FN + F5, removing the battery and pressing on the powerbutton, verified to the last videodriver, deleted the driver existing and installed new... unfortunately without result. I also tried to plug the TV with a different VGA cable, but no result. It is not the TV because I tried to connect the laptop to a TFT monitor and it did not work as well. Tested the VGA cable with my friends laptop: it works perfectly.

    The strange thing is: if I crochet TV up the laptop, I can hear the phone makes the his "new hardware found" and turns black same laptopscreen for a second, then everything appears on the laptopscreen. If I check the graphic properties with the right click on my desktop, I see they are no set for 'clone device ". As if the laptop computer knows, something is connected, but just cannot transfer the image to the TV screen.

    The graphics card is a Mobile Intel 4 Series Express Chipset family.
    The OS is Vista Home Basic (32).

    It's a shame that the VGA output seems to be down because I watch tons of videos and movies through my laptop on the TV screen. I don't know if this could be a software or a hardware malfunction. If someone has an idea or an idea, please let me know. Thanks in advance!

    Marcin.

    Hello

    All that you have done to test the functionality of a VGA port is good, but I assume that there must be a hardware problem and I recommend you to contact the nearest Toshiba service provider.
    Of course, on this path virtual, we can only speculate what may be the problem, but it should be tested correctly. If you want to last and ultimate test Exchange HARD drive, install original OS, you got with the functionality of your laptop and test with the factory settings.

  • Satellite L300-1AS - load and operate on battery

    I have a Satellite L300-1AS, running Vista. The computer began recently to show it is "connected, charge", but does not actually charge. Start the computer normally to aid decision-making of current, however if disconnected from the electrical network and the laptop died (no charge in the battery).

    I thought that he could have the power adapter, but I also have an older toshiba which has the same exact power adapter, I tried it and it works on both machines (and two adapters to charge the old laptop)

    Then I thought that maybe it's the battery and bought a new battery (the computer is under warranty, but I needed it fast). The new battery will not charge, but shows 6% charge.

    Then, I thought it might be corruption under Vista, so have returned the computer to its factory settings, by reinstalling the software. It has not yet solved the problem.

    I also tried a few other ideas I found in Google.

    I feel that this problem is perhaps something to do with THE system BIOS, I have tried to re - install, but it won't let me, and I can't find a way to return to a previous version.

    Anyone know where I can find an older version of BIOS for my machine and how to change it to an earlier version? It is currently the latest version V1.90 from the Toshiba site.

    Hello

    This really strange boyfriend s but to me it sounds like a hardware problem... I think it might be the motherboard issue. Maybe the card mother doesn t charge the battery properly.

    In my opinion the best way would be if a cell phone technician would check your laptop. They can test the motherboard and all other parts.
    I doubt that s a BIOS because you problem n t have the problem for the first time.

    On the Toshiba site, you can search the nearest ASP:
    http://EU.computers.Toshiba-Europe.com-online decision-making supported downloads & => find an authorized service provider

    Good luck! :)

  • Satellite L300 - ODD has exclamation mark in Device Manager

    Please could someone help me with my Satellite L300 laptop?
    It has a pre-installed Pioneer DVD - RW drive, but in Device Manager it has exclamation mark and not show as a CD player and DVD player.

    I tried for days to find the right drivers but no success, it displays as: PIONEER DVD - RW DVRKD08A ATA Device in Device Manager, I am unable to watch DVD s, thank you.

    Remove the device from the list and restart your laptop.
    The problem again?

    What operating system do you use?
    You use your laptop to factory settings?

  • Satellite L300 wireless works do not with my particular brand of modem

    Hello, I really need help here.

    My laptop is Toshiba Satellite L300, and I got it since April. I can't connect wireless via the modem I have here at home (netgear DGN2000).
    I can connect to other modems however. I've updated my wireless with Atheros card, but its still does not.
    If anyone has any suggestions please please please help!

    Thank you

    If you can connect to other routers on that it is proof that your laptop WLAN module works properly.
    In my opinion you cannot connect to your one because of wrong settings on your router.

    Your laptop detects your router? Your router is visible for Satellite L300?

  • Satellite L300-20W - DVD will not play

    Satellite L300-20W.
    Laptop CD in WMP fine plays.
    However if I try to play a DVD I get the message "Windows Medial Player cannot play the DVD because no compatible DVD decoder is not installed on your computer."

    If I try to use a Toshiba DVD player, a box opens (with clouds in there) and almost immediately I get the message "Toshiba DVD Player has stopped working" and then "Windows will close the program and notify you if a solution is available," but of course he never advise me.

    Any help much appreciated. (Old man and not very technical)
    Thank you very much.

    Hello

    Regarding the error code: Windows Media Player cannot play the DVD because no compatible DVD decoder is not installed on your computer. »

    It seems that your Windows Media Player does not have the necessary plugin DVD decoder that allows you to watch DVDs.
    See this MS knowledge base article:
    http://support.Microsoft.com/default.aspx?scid=kb;en-us;306331

    I also recommend to install a codec that allows you to watch other videos stored in other formats.
    K - lite Mega Codec Pack is free and contains all the codecs.

    If you are not able to use the Toshiba DVD software you must reinstall this tool.
    I think that the most recent version is released on the European driver Toshiba page.

  • Satellite L300-1AY recovery does not

    Hello

    I have a question about the recovery for a Tosihba Satellite L300-1AY with Windows Vista preinstalled.
    I wanted to grab my laptop and when I pressed F8 during startup I could choose Restore my computer.

    But after the game, I received a message-box (System Recovery Options) telling me that installed programs may not start, and the only option I had was press OK then the computer shuts down.

    I was wondering if there was any way, this can be corrected or if there is another way to get my computer back.

    Thank you
    Pascal

    Hello

    You may retrieve the laptop using the recovery DVDs that you created if all goes well before this problem happened
    Did you create recovery DVDs?

    If this isn't the case, then only the HARD drive recovery option can be used.
    For this you have to press F8 after that laptop has been powered.
    Then choose fix my computer.
    Then a new window will appear and then you could choose Toshiba Recovery.

    If this procedure does not start and you will not be able to use HARD drive recovery you need a Toshiba Recovery DVD.

    If you didn t create the recovery DVD, so you can order it here:
    https://backupmedia.Toshiba.EU/landing.aspx

  • Is dualboot on Satellite L300-1 has 3 possible?

    Hello

    I have the Toshiba Satellite L300-1 to 3 with Windows Vista Home Premium as the operating system.

    After you modify the partitions on my drive, I tried to install Windows XP in a system dual boot, but this isn't the case at all. I have question, is that this model (L300-1 has 3) is done only for Vista?

    Concerning
    NSK

    This model laptop is certainly not made for Vista only. The question is what you try to do exactly.
    I installed Vista and Windows XP Home edition on my Satellite A300. If it works on my laptop it takes work on your too.

    Please let me know how you try to install Windows on your laptop?

  • Satellite L300-13R - WLAN does not not on Windows 7

    I am on Windows 7, it can't detect the wireless device, says I need to reinstall the driver, vista and xp driver install it as they say that they do not support my opperating system.

    I currently have to plug an ethernet cable to get internet. I use a Toshiba Satellite L300 - 13R PSLB0E.

    Please could I have help, thank you very much.
    P

    Hello!

    I think that this is not a problem. Windows 7 is only a beta OS and at the moment, the pilot decision-making is not very good.

    You might find some drivers on the site of the factory of the WLAN card. In your case, it should be Realtek.

    Good bye

  • Re: Satellite L300-1 has 3 - How can I use AHCI?

    Hello everyone,

    Recently, I have a laptop Toshiba L300-1 has 3 and I have a problem with the * AHCI in the BIOS when I install or use Win xp (sp2), the laptop cannot start and continue, I think because can not detect the HARD drive in * AHCI mode but doesn't have a problem with * COMPATIBILITY mode.
    Maybe some of you can help me with their knowledge.
    1, which is * AHCI? *
    2nd, which one is the best?
    3rd, how can I solve this problem?

    Thank you very much.

    Hello!

    If you are looking for the AHCI mode, you must reinstall Windows with drivers SATA (Intel Storage Manager). AHCI mode is faster than the compatible mode.

    After the installation of Windows in compatibility mode, you can enable AHCI mode. Therefore, you must reinstall Windows.

    If you want the AHCI mode, look at the Toshiba site for the Intel Storage Manager. This package contains the SATA drivers you need.
    http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

    In addition, this could be useful for you:
    http://195.182.196.33/KB0/TSB8602DB0001R01.htm

    Good bye

Maybe you are looking for