Satellite L300-147 recovery disk problem

Similar Questions

• Satellite A40-151 recovery disk problem

  Hello

  I hope someone can help.

  I bascially bought this new laptop altogether earlier and until recently he works very well, but a few weeks ago the hard drive, I think that then, it happened to the extent where everything would load and then the pc would lock or it would freeze on the windows loading screen.

  Now, I did a little research and from what I could gather my HDD disappeared.

  I then bought a new hard drive for this the same exactually that I had same model, same brand etc and even same GB, which is 30 GB.

  I placed in the new hard drive and went to install windows xp on the recovery disks, but now I get a problem it starts and tries to install the os, but about 15% in the disc stops spining and I get an error 437 that the file cannot be run or something like that.

  I did something wrong? do I need to buy a whole new operating system? I hope someone can help

  Thank you for your time

  If you have purchased this Satellite as new and quite while ago why you pay money for new hardware? If one of the pieces of equipment is defective warranty will cover the costs of replacement.

  As far as I know that satellite A40 is old enough laptop model, and I guess that it takes more than two years. Anyway, if possible try to install the OS by CD Microsoft facilities to determine if the OS facilities can be completed. Maybe faulty recovery CD is (some scratches).

• Installation of Satellite P200-144 recovery disk problem

  Model Satellite P200-144 PSPBGE

  Hi all

  Today I received a 2nd recovery disk mail via UPS directly at Arvato distribution GmbH

  Yet once there not in the exact same place as the 1st disk that I received but returned and they replaced.

  My original recovery disk was lost around the House 3 months back, which I am now myself kicking on.
  Reason for restoring factory default settings was that I wanted my pc to be clean like a cell phone factory default as it was full of registry errors.

  In any case on the problem, after that 67% of image recovery happens with the corrupted file, here is the installation proc.

  Try to rename all the letters of potential left to HDD0
  Try to rename all the letters of potential left on HDD1

  Microsoft DiskPart version 6.0.6000

  Copyright (C) 1997-2007 Microsoft Corporation.

  On computer: MINWINPC

  Disk 0 is now the selected disk

  DiskPart succeeded in erasing the disc

  DiskPart succeeded in creating the specified partition

  Partition 1 is now the selected partition

  DiskPart successfully assigned the letter of the drive on the mountpoint.

  100 percent complete

  DiskPart successfully formatted ther volume

  DiskPart succeeded in creating the specified partition

  Partition 2 is now the selected partition

  DiskPart successfully assigned the drive letter or mount point

  100 percent complete

  DiskPart successfully formatted ther volume

  DiskPart marked the current partition as active.

  Define RECO-info-guid = 4D2AE583-8FD5-4D7D-AE07-B098C1CBA1B5
  RECO-info-imagecount value = 2
  define the RECO-info-partnumber = 1
  RECO-info-numsplit value = 5
  RECO-info-bootindex value = 0

  L ' ImageX for Windows tool

  Copyright (C) Microsoft Corp. 1981-2005 all rights reserved.

  Progress: 67% 06:44 minutes

  [WARNING] C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat. [United Nations
  [compress files: (seq.90)-> file corrupted block at offset 012E3CF9]

  [RETRY] Restore C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat.

  [WARNING] C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat. [United Nations
  [compress files: (seq.90)-> file corrupted block at offset 012E3CF9]

  [RETRY] Restore C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat.

  [WARNING] C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat. [United Nations
  [compress files: (seq.90)-> file corrupted block at offset 012E3CF9]

  [RETRY] Restore C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat.

  [WARNING] C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat. [United Nations
  [compress files: (seq.90)-> file corrupted block at offset 012E3CF9]

  [RETRY] Restore C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat.

  [WARNING] C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat. [United Nations
  [compress files: (seq.90)-> file corrupted block at offset 012E3CF9]

  [RETRY] Restore C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat.

  [WARNING] C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat. [United Nations
  [compress files: (seq.90)-> file corrupted block at offset 012E3CF9]

  [ERROR: 1392] C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat.

  ResourceExtractToFileByStruct: (seq. 50)-> Uncompress or WimCopyFileEx failed

  [ERROR: 1392] C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat.

  Error image restoration.

  The file or directory is corrupted and unreadable.

  Error: ImageX could not apply E:\05021XSP.swm Index 2 Weird Vista in C:!

  Is there a reverse this problem?
  My thoughs is that the image is corrupt.

  The error that you declare, is a fault with the Vista disk image cannot be applied to the hard drive.

  Which you used 2 recovery discs of different product, which would indicate that there is not support for product recovery but a defective hard drive, possibly bad sectors on the hard disk.

  If the laptop is in it duration of warranty, then give Toshiba a call for the book on deposit for a repair of the equipment.

  0844 847 8944

• Satellite A300D - creating recovery disk problem

  Hello.

  I have Toshiba Satellite A300D-11 t (extended A300D-11) and I would like to create recovery disk. Problem is that I can't run the Toshiba Recovery disk creation tool. There is no shortcut in the start menu.
  I tried to run Program Files.

  Program itself exists (or at least I think it does), there are files in the Program Files folder, in "Programs and features" program is also so I could remove it.
  Simply click on the file TosRDC.exe (or any other file *.exe in this case) and it does not start.

  For memory - recovery partition exists and has not been changed.

  System - Vista Home Premium 32 bit.
  What should do?

  Hello

  I would say to pick up the machine from the disk and then, immediately after the machine, you should try to create a recovery disk. It could be that something in the meantime destroyed some piece of software in your operating system that could be the reason of this problem.

  Maybe not a very elegant solution but the only one that works every time.

  Welcome them

• Satellite L300-215 - recovery disk could not be installed on this hardware

  Hi, after running fine for several months I stopped my laptop recently and when I went to start upward again it tells me that there is an error with Windows and was to be the center of repair.

  After four hours of waiting and get no - where I decided to use the recovery discs, I had the last time I sent him away. After installing all the necessary components it then tells me it was installing Windows. After doing this for ten minutes, I got a pop up block telling me that "Windows cannot be installed on this material. After it closes and I restarted, he told me the same message and suggest I reinstall so I tried the process and it ended in the same result.

  What is the problem?

  Hello

  I m wondering... I never heard of such an issue.
  If I understand you correctly, you have received the Toshiba recovery disks or have you created yourself?

  Maybe the recovery discs are not designed for this type of laptop
  If you can test it with a disc of Microsoft you should do. Maybe it will work.

  In addition, it would be interesting to know if the motherboard of your laptop was exchanged prior. Theoretically, this could happen missing DMI information. In this case an authorized service provider can help you. :)

• satellite boot and recovery disk problem, help please...

  Hello

  Well, here's the question. My satellite is a few years old all of a sudden, she leaves the start. Gets the starting address windows xp mode then hangs and repeats the process. So I thought, well... I just install my recovery discs...

  Well well, thank you for a reason, and his frustration as what... I get an error of bad machine. Don't allow me to install my recovery disks. Call toshiba, they say my warranty has expired have to go pay a service representative... Arrgh...

  This was purchased new and this is the correct machine...
  Anyway... when I'm bad machine, I get:
  Failed installation aborted/a process!
  A:/>_
  I'm assuming, there is something I can type here to recognize my machine... Any ideas? Toshiba was no help. Or... If you have an idea how can I start this thing without recoery disks.

  Thanks in advance...

  Hello
  before anyone can say anything, I would be nice to know what type of laptop you have.
  Cause Toshiba has in the meantime changed the recovery process.

  Good bye

• Satellite L300 - product recovery disk hangs on step 2 of the installation program

  The product recovery disk will not work, it hangs on step 2 of the installation program.

  Help appreciated

  Hello

  Do you mean you cannot create the recovery disk or do you mean that you cannot complete the installation of recovery procedure?

  If you can not finish to create the recovery disk, then you must test different drives from different manufacturers. In most cases, this helps

  I m with Verbatim DVD-R

• Satellite L300-217 - recovery disk cannot complete installation

  Blue screen appeared after having a few problems. I tried to reload the factory settings that did not work, so I ordered the Toshiba recovery media. After following the instructions that it seemed finally said to wait while windows was installed, after a few minutes this appaears:
  "Windows can complete the installation. Restart the installation '

  I tried this 6 or 7 times now and I do not get the case. I would be really grateful for assistance if possble.

  Thank you
  Kiki :)

  Hey,.

  Before you start a lengthy discussion, can you install Windows from a normal disk of Microsoft? Just to test if it s a bad hardware work or not.

  See you soon

• Satellite Pro A60: Recovery disk damaged

  Can someone help me get a new satellite pro A60 recovery disk. My first drive was damaged.
  Thank you
  carol9430

  Hi, Carol Ann,.

  You can get the new partner authorized Service Toshiba recovery disks. You will find them listed on the Toshiba Web Site.

  Kind regards

• Re: Can I use the other Satellite U400 series recovery disk

  I have Toshiba Satellite U400 121. My recovery disk does not work may be due the scratches that I see in it. I took the laptop to the Toshiba Center service and I got a negative support of them. They said, they can't put the Windows Vista because the recovery disk is not there, and they have put Windows XP inside and handed to me.
  later I got to know that Windows Xp is not Geninue one. :|

  I can still see one of the Partition 'D:' with folder HDDRecovery inside.

  So can I use Recovery Disk of all PC model Toshiba laptop other than the Toshiba Satellite U400 121 recovery disk.

  In fact, I tried with the other model recovery disk, that at boot with this disk, Recovery Wizard starts up, but since I'm not sure about this one I stopped there and brought out.

  Please one of you let me know if you have valuable contributions on this.

  suggestions are welcome!

  Thanks in advance.
  wassim :)

  Post edited by: Mikael

  Hello

  I don't know Mr. which series Satellite U400-121, it is, but you must use the recovery disc designed specifically for this series of laptop!

  Another recovery disc cannot be used because the drivers and tools that have been implemented in the image of Toshiba are not designed for this series of laptop!

  By the way; You can order the CD from recovery from here:
  https://backupmedia.Toshiba.EU/landing.aspx

  Good bye

• Satellite A135-S4666 - recovery disk displays an error message

  The hard drive crashed while I replaced it. I am trying to use the recovery disk to take the computer to the "out of the box configuration.

  I chose to 'recover' rather than erase the hard drive based on this choice. Then it copies the files from the first disc and pushes me to the second. After putting the other continues to copy files. Finally, she moves more to 'recover now' she does and seems to be using the hard disk newly installed something between 35 and 50% of the task. At this point, I get an error message stating "error recovery" and invites me to press ok to shut down the computer and spits out the CD. The error message is coded 10-FC12-0002. I tried 4 or 5 times with the same result.

  Am I supposed to use disc erase first, and then use the recovery mode since it is a new hard drive? Or I have a defective recovery disc?

  Any comments or ideas would be greatly appreciated, I do not get the case at this stage.

  Hello

  It's not easy to tell if it s a recovery disk problem or if the new HARD drive is the problem. Have you tested a Microsoft disc for example? If the disc of Microsoft is, it seems that your recovery disc is noisy and needs to be replaced. Otherwise the new drive HARD cause this problem.

  Check this box to determine the cause of this problem!

  Good bye

• Satellite Pro L300 PSLB1A: Recovery disk doesn't work no-error 0xc000000f

  I get error 0xc000000f on restart and if I try the recovery disk I get error error: 10-FC12-0241
  operating system is vista professional and toshiba laptop L300 PSLB1A - 02S 008

  Hello

  You mean that you cannot start the laptop using the Toshiba Recovery disk you created?

  Go into the BIOS and check if the CD/DVD drive is recognized. It should appear on the first page of the BIOS.
  If the CD/DVD drive is not listed, then you should set the compatible SATA mode and must save the changes.
  After this attempt to boot again from the recovery disc.

  I also searched on the Toshiba driver European page for info and found a few details;

  There is an update of firmware for CD/DVD TS-L633A and TS-L633P player.
  This Firmware solves "sometimes not able to writing on DVD + R media'.
  The problem occurs only on DVD + R media, other media type have no problem.

• Satellite A200 - recovery disk problems

  I just bought the (all new store big tech) Satellite A200 for a few months and not used because I was on business trip to take. This weekend, I opened it up and running for a while.

  After that I read the manual and found that I need to create a recovery from the tools provided disk. However, the problem start here:

  1. when I click on "Recovery Disc Creator", a message is display "no HDD Recovery area!, the toshiba Recovery Disc creator cannot be launched."

  2 then I call center service support and to inform that there is a problem with the "recovery disk creator" and I have to retrieve the laptop using the hard drive partition recovery (waiting when 0 turning on the system) and the next step is complete:
  a. the laptop's boot in the recovery screen function.
  b. when I try to "restore windows PC" (option 3), it is display and error message on file not found.
  c. when I try to click on "restoring the recovery disk" (option 5), it asks me to put in the recovery disk which I do not have?

  NOTE: I'm sure that the hidden recovery partition is therre. 1.46 GB. There is no way that I can access the hidden partition from a normal windows vista screen (without drive letter).

  Then, I called the support center again (now what difference person support) and to inform you that:

  1. my recovery partition is corrupted and I need to get the recovery disk again (which I did not), it's going to cost me AUD $66 (I got from HP one and cost me AUD $15 and will be free if I come and Pick-up) for administrative costs. And it is a procedure.

  2. I explain to the support staff that it is brand new in the box laptop and I consider it as defective on arrival (DOA or FOA.

  3. I also ask what causes the problem and has been a consultant with the following reason:
  a. I may have deleted the partition accident (impossible because I still can start on the recovery partition, but can not recovery which all).
  b. There may be a virus infect in my laptop which was remove my recovery file in the hidden partition (ridiculous, you can delete some files in the drive on which you cannot yet access).
  c. I should create a recovery disc when the first time LAPTOP computer service. Which it is recommended, I get a question that if I do not, or I forgot to do so, this means that the software will automatically delete the system restore image file? I have no answer for that.

  State (when I try to post this messgae), I'm still waiting for the staffs of complaint call fomr back (very tie when you talk in support of service these days).

  NOTE 2: I would like to raise these issues, not because I want something (I do both IT support) complaints but I just want to solve the problem:

  1. is there some sort (software) allow me to access the hidden drive in and out of recovery disc image, my laptop still have the partition.

  2. is there a link I can download image recovery (in iso format) disc again? I've known it is not a question of wise, but when I ask the support staff that can re - install windows vista with the license key from the bottom of the laptop and has advised that it is not work or turn on.

  3. is there someone out there has similar problem

  Hi Thomas

  I have a European model A200 (don t know what you model is) and the A200 was NOT equipped with the option of HARD drive recovery! This means that you cannot create your own recovery disk!
  My laptop came with the Toshiba Vista recovery DVDs!

  Still is it that your 1.46 GB hidden partition is not the Toshiba recovery partition but Vista hidden partition. It contains the WinRE files that are useful for repairing the operating system if something will go wrong!

  Second, the Toshiba Recovery folder is too big for the partition of 1.46 GB!
  So it is not possible that it would be placed on this s partition!

  So finally, it seems that you will not be able to create the own recovery disk and therefore, you have to order it from the ASP in your country.

  Welcome them

• Satellite Pro M40 recovery disk install XP on satellite or L300?

  I had a Satellite Pro M40 with XP Pro who died completely (hard drive). I have the recovery disk.

  I now have two laptops more - a satellite and a L300, both with Vista. I want to install XP on one of them (preferably the L300). Is it possible to do using my M40 recovery disk?
  A bit of googling suggests that the differences in the size of the hard disk - may be an obstacle. My M40 40 GB drive, these new drives are much larger.

  Anyone tried this or have any advice?

  It will not work. Before the start of the recovery procedure the laptop will be identified. If the recovery media doesn t code is code on the laptop, the installation will be interrupted.

  M40 MS on L300 recovery no way.

• Satellite L300 - error recovery disc creator - disk is scratced or dirty

  Hi all

  I tried to create recovery disks for my L300, but after a 1-2 minutes, the program stops and says: 'Please check if the disc is scratced or dirty, if so, try again with a new disc' error code 0E01B5-26-2A030C00.

  I tried this many times with many different DVD in recent weeks, but this continues to be!

  The machine is old just a few weeks and run Vista family premium advice please as Im stuck.

  Thanks for reading.

  Hi mate

  I think that you have used are simply not fully compatible disks and supported.
  In my case I couldn't t create the recovery because the CD/DVD drive was not able to manage it.

  Is that many CD & DVD discs supports properties and different standards and in many cases, CD/DVD players have a lot of difficulties to manage different disks.
  I think you should just test some DVD-R discs.

  I use DVD-R and was able to create the recovery disk.