Satellite L300-19F starts not-cannot start Windows

Similar Questions

• Satellite L300 laptop will not load Windows

  I have a model of Satellite L300 number PSLB0A - 00L 022 running windows Vista.

  The problem is that it does not load Windows. It starts ok and I can access the boot manager and the Setup utility and that's it. It stops just loading.
  After studying the problem, I ran a car aptitude test and the result was the error code 0 x 70. After looking at the code I m under the impression that I need to erase the disc. I have no problem with that.

  My question is - if I run the windows Recovery Wizard will be it solve my problem? I will have to re install vista at all? All advice is appreciated!

  Hello Jane and welcome in the Toshiba forum

  After reading your ad, I must say that the best solution and easier for you is to reinstall the operating system via original Toshiba recovery DVD. This DVD contains the operating system, all necessary drivers, specific Toshiba and utility tools. After recovery image installation you will get state out-of-box and clean the preinstalled operating system.

  Yes, this should solve your problem. Please note: when you do it all saved data will be deleted.

  You have some important data saved on your laptop?
  Do not use this disc reinstall Vista and everything should be ok again.

• Satellite L300-19F and WXP - audio device does not work

  Hello

  I installed Windows XP Home edition on my Satellite L300-19f after change SATA compatibility I installed Windows XP Home edition and installed all the drivers and everything's fine, but the audio device does not work. I downloaded the driver from DOWNLOAD & support center, but he can not detect.

  BTW: he used to work on Vista.
  What should I do?
  And thank you

  -Download driver audio Realtek HD Realtek page.
  -Go to the Device Manager
  -Remove the sound card.
  -Remove the High definition Audio Controller
  -Restart the laptop.
  -Reinstall the Realtek HD audio driver

• How to disable the touchpad on Satellite L300-19F with Windows XP Home edition?

  Toshiba Satellite L300-19F, who was with windows Vista
  I installed windows XP and everything works fine.

  Since I'm on USB mouse to run I want to disable the Touchpad, but when I press Fn + disable key for touch pad it does not work.

  Need help.
  One can tell me what the problem is?

  Hello.

  To disable the mouse pad, you can go to control panel-> mouse control and disable the mouse pad, or you can use FN + F9.

  Kind regards.

• Satellite L300-19F: how to install drivers?

  Hi, I would like to know, how to install drivers for Satellite L300-19F and what order to install drivers?

  Because I have somes drivers that I can't install it and I have a component without a driver.

  Thanks a lot for your help!

  Post edited by: XatOr

  Hello!

  Install the drivers, you can t and normally, you will find all the drivers on the Toshiba driver download page.
  Did you install Windows XP or Vista?

  I have a Satellite L300 too and install the as far as I know this is right:

  After installing WXP continue with
  Driver Chipset
  Display driver
  Audio driver
  Driver modem
  Common modules
  LAN driver
  WLAN driver
  And so on with drivers

  Continue with the tools
  Controls
  Utilities
  Hotkey utilities for display devices
  Press the start/stop utility
  Energy-saving

  Good bye

• Satellite L300-19F - need Vista drivers

  I really need your help...

  I reinstalled windows Vista on my laptop Toshiba Satellite L300-19F and I do not have the necessary drivers... So I need your help...

  Can you PLEASE send me a link or send me all the necessary drivers, I need so that I can use my laptop without any problems (drivers of graphics, wireless, ethernet (NIC), touchpad, sound card drivers etc...)

  PLEASE HELP ME!
  I've looked everywhere and I can not find them...
  You are my last hope... ANSWER AS SOON AS POSSIBLE...

  THANKS IN ADVANCE!

  Hey Buddy

  I wonder if you really searched these Vista drivers. I doubt it.

  Satellite L300-19F seems to be a PSLB8E series and all THE Vista drivers are published on the European driver Toshiba page.
  Visit the European driver Toshiba page and choose this series.
  Then, you will get all the necessary drivers!

  Good bye

• Can satellite L300-19F - I change the Vista of French to English?

  Hi all

  I brought a new laptop Toshiba Satellite L300-19F
  I want to change the OS language french English full is possible

  If this is not the case, do I have to buy a new cd englsih for the same thing or can I get assistance from toshiba for the french to English

  Salim

  It is not possible to change the language on an already preinstalled OS. What you need is new DVD installations on the English language. You'll have to buy one. Toshiba has nothing to do with it.

  The software is delivered on the hardware and you have paid for a license only.

• Satellite L300-215 - Webcam not working not

  The webcam on my Satellite L300-215 did not work because I downloaded the new software of Toshiba months ago.
  The Chicony webcam is not yet recognized, and it will not install the Toshiba software.

  Two hours with Toshiba technical staff, including their having access remote to my computer, does not solve the problem.
  It seems that this is a very common problem and I tried some of the suggestions on the assignments, but without result.

  Anyone out there have the answer?

  I have two laptops Toshiba, Satellite P200D and Satellite A300, both with webcam and everything works fine. I agree therefore with statement on the very common problem.
  Webcam works well if your laptop is preinstalled with recovery image Toshiba (factory settings)?

  > I tried some of the suggestions on the assignments, but without result.
  What you have tried to solve this problem?

• Satellite L300 - 16L will not start

  Hello

  I hope someone can help me thanks.

  I have a Toshiba Satellite L300 - 16L that has suddenly refused to start. When I turn on my laptop, the screen stays black for centuries, and then a message from the Windows Boot Manager appears, saying:

  "Unable to start Windows. A recent hardware or software change might be the cause. To solve the problem:

  1. Insert your Windows installation disc and restart your computer.
  2. choose your language settings, and then click "next".
  3. click on "Repair your computer."

  If you do not have the disk, contact your system administrator or computer manufacturer for assistance.

  File: \Windows\system32\winload.exe

  Status: 0xc000000f

  "Info: the input of the system could not be loaded because the application is missing or damaged.

  The problem is, I don't remember if I provided with the installation disk and I was unable to find it. I was told that I could buy one, but it is very clear on the website how much it will cost. It feels strange to implement credit card details before you know what the price will be.

  Can someone please advise what I should do to fix the above problem and how the costs of the installation (about at least) disc. Also, how long is the delivery of the new installation disc cost? If someone could set up a direct link where the disc can be purchased, it would be great.

  Thank you very much in advance for your help.

  Hello

  According to published information, boot.exe or smth like that Windows is corrupt.

  > Can advise someone please what I should do to fix the above problem and how the costs of the installation (about at least) disc. Also, how long is the delivery of the new
  > cost of installation disc?

  In your place, I would order a [Recovery disk | https://backupmedia.toshiba.eu/landing.aspx] Toshiba because it is cheaper and contains all the drivers/utilities that get Windows copy disk. I have never ordered from toshiba, but as I know that 2 weeks delivery and about 35 euros. Of course, you can get friends borow windows disk and try to repair or install windows

  All drivers are:

  http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp

• Satellite L300 - drive CD/DVGW cannot start (Code 39)

  Satellite L300 - CD/DVGW SD-L622A - device cannot start (Code 39)

  I have not really used the player for a while now, but it was working fine when I set up the laptop.
  Now, I recently noticed that when I go to my computer, it shows three years not DVD player. I went to properties and Device Manager and it says only: "device cannot start (Code 39).

  I have downloaded the driver and re-installed but still does not work.

  Help, please.

  Thank you

  Can you please tell me which driver you have reinstalled? AFAIK for optical disc drive there is no separate driver.

  In any case put code 39 as a search term in this forum and you will find the solution to this. ;)

• Satellite L300-2CW does not start

  Hello

  I hope someone can help as Im at a loss!

  Laptop - Satellite L300-2CW (PSLB8E-15W007EN) Windows 7 upgrade from Vista (Tosh upgrade disc)

  When I turn on it shows the Tosh screen then just a line of underscores in the upper left side and that's it.
  I've tried everything. F12 F2 holding 0 at startup but still nothing.
  The hard disk may have crushed the thought but put it in a basket and now have a copy of his hard drive, so nothing wrong there.

  IM completely lost now.

  Help, please.

  Thank you Russ
  .

  Hello

  You have tried F2, F12 and 0, but have you tried to press F8 immediately after switching on the device?
  Then you should see an advanced startup options.

  Here you must choose to repair my computer and Toshiba HDD recovery.
  This should launch the installation from the HARD disk partition.

  Have you created the recovery disc at the beginning?
  I presume that you didn t.

  Well, if the procedure with the HARD disk partition will not help, then you will need to order the disk recovery from here:
  https://backupmedia.Toshiba.EU/landing.aspx

  Welcome them

• Satellite L300-144 does not start

  Hello!

  My laptop Toshiba Satellite L300-144 arrested beginning after about 2 weeks of no use with the following sympthoms:
  -When DC cable is unplugged, none of its lights are turned on and pressing the button "power on" (and others) does nothing;
  -When DC cable is connected, 'DC IN' led is _blinking green_, led battery is _blinking orange_, others are turned off. by pressing the button "power on" (and others) does nothing.

  Waited for over an hour with DC cable connected try to charge the battery of the laptop without change.

  I have not found the meaning of this signal (DC IN green, battery flashes orange flashing) in my manual.

  What is this means problem with the battery of the laptop?

  How can I fix?

  Hello

  Flashing led DC-IN is not a good sign.
  Of my knowledge led begin to blink when a hardware error has been found.
  I'm not sure if this will help but try a short workaround:
  -remove the battery, disconnect the adapter
  -wait about an hour and then reconnect the two part.
  -try to turn on the laptop

  Check if it helps.
  But if this work around won t help you, then you would have no choice but to get in touch with ASP in your country.

  Sorry, but that's all I can suggest.

• Satellite A45-S150 starts windows - safe mode is not possible

  My machine locked upward and when restarted, that asked me to make a selection among several options. Safe mode, safe mode network, prompt mode without failure, recent well known parameters and then just windows. It starts windows in these modes. Any help would be appreciated.

  Brad

  What to say Brad. It seems the full Windows XP operating system has crashed!
  Believe me, something like what is happening simply and I think that it s nothing unusual to anyone who use and works with Windows OS for a long time.

  You should definitely try to reinstall the OS from the Toshiba restore CD.
  But this procedure will format your HARD drive and you will lose all files stored on the HARD drive.

  But this is only one possibility to get Windows running on this laptop.

  Check it out buddy!

• Satellite L300 - I can not install an update for Windows Vista

  I can not install an update to Windows Vista after you restore laptop (satellite L300) to factory settings. Tried to install with automatic updates and download of the update on your computer. What auto-update error: 8024 to 000.

  When you try to manually install SP1 getting error: 0800FFFF. I tried to disable the firewall, Defender and the UAC. Someone with such ideas?

  The Windows Update 8024 A 000 error Code means THE NOSERVICE WU E. This translates as UA was impossible for incoming calls to THE service.

  I would like for you to perform general troubleshooting steps for Windows Update.

  This diagnosis is generally applied to all Windows Update related issues.

  Stop Windows Update services *.
  1. click on start, click principally made programs, accessories, right-click on command prompt and select run as administrator.
  2. If you receive a user account control notification simply click on continue.
  3. at the command prompt, type the following commands and press ENTER after each command.
  net stop wuauserv
  net stop bits
  net stop cryptsvc
  4 Please, do not close the command prompt window.

  * Rename Windows Update records *.
  1. at the command prompt, type the following commands and press ENTER after each command:
  2 ren %systemroot%\System32\Catroot2 Catroot2.old
  3 ren %systemroot%\SoftwareDistribution SoftwareDistribution.old
  4 Please, do not close the command prompt window.

  Registration of DLL's on Windows Update *.
  1. Please copy and paste the following text in a new Notepad document and save the file as WindowsUpdate.BAT
  2 if it is registered correctly the icon will go from a Notepad file in .BAT file which has two blue toothed wheels as its icon.

  Restarting Windows Update services *.
  1. click on start, click principally made programs, accessories, right-click on command prompt and select run as administrator.
  2. If you receive a user account control notification simply click on continue.
  3. at the command prompt, type the following commands and press ENTER after each command.
  net start wuauserv
  net start bits
  net start cryptsvc
  output
  4 now, please check the updates via Windows Update to determine if the problem has been resolved.

• 2 years by Satellite L300 has started playing up - recovery disc question

  Hello world

  I ve created the Toshiba Recovery Disc (s) and think I need to use it now. My Satellite L300-1AQtaking AGES to load when I turn on, it sometimes crashes for no apparent reason (it tells me memory is OK, so not a problem of RAM) and because of the other weird inconveniences.

  Should I use the recovery disks do, you think? Is it simple? It does not give to-step instructions please? Operating system is Vista.

  Thank you very much

  Angethehippy
  x

  Yes, you must use recovery discs and make clean OS install. After 2 years of use, I think that the operating system needs to be updated.

  After the own OS, you will see that laptop will work a lot better than before.
  Please also optimize OS: remove all the unnecessary stuff from the system and configure the Windows startup. This will make the start much more quickly.