Satellite L300 - 1AP PSLB8E starts not--a black screen and blinking cursor

Similar Questions

• Windows 7 starts problems with black screen and the cursor because of power failure

  I'm on a Windows 7 64-bit Home Premium OS. Start-up problems arose after the power failure (accidentally unplugged the charger, the battery was not in place) during a video call in Skype. Accessories attached to the laptop at the time were a Logitech Webcam, a dongle Bluetooth, microphone and headphones.

  When starting my laptop Asus N81VP, he'll go as far as the 'Starting Windows' logo, then I meet a black screen with a mobile cursor. I don't then right click, CTRL + ALT + DELETE.

  I tried the things:

  Start Up Repair = "cannot automatically repair."

  System Restore = no available restore points

  Windows Memory Diagnostic = at 100%, no screen of detected problems, then black with mobile cursor

  Networking Mode Safe Mode/Safe = black screen with cursor mobile

  Activate video low resolution (640 x 480) = black screen with cursor mobile

  Good known Configuration = black screen with cursor mobile list

  Start Windows normally = black screen with cursor mobile

  Please help me. I've had this laptop for less than a year, and it would break my heart to have to re - format.

  You seem to have exhausted most of the options available in such cases, except two:
  D ' log in under a different account.
  -To restore your registry files manually. See below for more details.

  On your heart that could get broken: have you considered using the imaging facility that is integrated with Windows 7? You can find it in the control panel / backup and restore. This is somewhat marginal in the feature and it can be finicky, but it saved my butt several times.

  You can restore your registry files manually to a previous point through the steps described below. The process is complex and requires some careful typing. Ask a computer-savvy friend to help you if you lack experience in this field. Note that it may reset your password to a previous value.
  1. keep tapping F8 during the first phase of startup.
  2. Select repair in the menu that looks like this:
  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode
  3 log in as administrator if you are prompted.
  4. Select repair when prompted.
  5. Select the command line in the menu that looks like this:
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7
  6. identify the correct drive letter for your Windows installation. It could be one drive other than c, but it will not X:. You do this by typing commands
  DIR C:\Win*
  Dir D:\Win*
  dir E:\Win*
  until you find the Windows folder.
  I'll call this "Q:" drive
  7 type these commands:
  CD /d Q:\windows\System32\config
  xcopy *. * Q:\MyRegBack\
  CD RegBack
  dir
  8. review the dates of the software, system, and SAM files. The files created before or after that is your problem?
  9. If they were made before the problem appeared, you can then type these commands:
  copy software / y...
  /y copy system...
  /y copy Sam...
  (the two points are part of each order)
  10. restart normally. If things don't work then you can go back by copying files from the original register of Q:\MyRegBack to Q:\Windows\System32\config.

• Windows 7 - partition windows on a new drive... travel startup gives nothing but the black screen and blinking cursor

  I am replacing a hard drive and move a partition Windows 7 from one disk to another.  The original partition of Windows 7 starts and works perfectly, but when I clone to the new drive, I have a terrible problem getting the new boot drive.

  On the original drive, the partition is the partition 3, on the new disk partition is partition 2.

  Both drives have the same size of cylinder.

  The new partition was created as a partition main with the same dimensions as the other and cloned in the whole content of the partition.  The files are all there in the new partition.

  He is currently not starting correctly, it starts the partition, but then he's here - I don't see Windows Welcome screen or anything - just immediately inadmissible black screen with a blinking cursor.  All I can do is reboot.  By pressing F8 at startup does nothing.

  Start of support for windows 7 and running repair features discovered the new partition as C: and CHKDSK C: points and gives a good report of the partition.

  BIOS settings have been lacking.

  The following commands were executed the repair windows 7 installation media feature:

  Of http://technet.microsoft.com/en-us/library/cc749177 (v = ws.10) .aspx

  BOOTSECT/NT60 C:

  And http://support2.microsoft.com/kb/927392

  BOOTREC /FIXMBR

  BOOTREC /FIXBOOT

  C:
  BOOT CD
  BCD ATTRIB S H R
  REN C:\BOOT\BCD BCD. OLD
  BOOTREC /REBUILDBCD

  The new partition was made active and is the only asset.

  If I erase and freshly installed Windows 7 on the partition, it does not start successfully, but if I then replace the contents of the partition with a clone of the other partition of work, it does not work.

  So that leaves me with a pretty good confidence that the problem has nothing to do with the charger starting and everything related to the content of the partition itself.

  I can't find more useful information for the boot partition.

  Any ideas?

  Moving Windows is not the best method.

  It is better to 'image' or 'clone' Windows to the new drive, using software such as Acronis

  True Imageor AOEMI Partition Wizard (free). I've used both (has a free version of Western Digital

  Acronis to use if you have WD hard drives).

  .Acronis.com/en-au/Personal/PC-Backup

  .disk-partition.com/Free-Partition-Manager

  (EDIT: I need to be careful.) Had redundant stuff here...;). )

  Dual-boot can be difficult in the best of times, but two partitions on a HARD drive...

  I don't think that you can select a particular partition in the BIOS to be your first boot option, only

  from the HARD disk, so it would be a blow to the top.

  See if there's useful information below-

  .sevenforum-Restore-Windows-7-Master-Boot-Recor

• Computer won't start not up - black screen and beep!

  I can't from my HP desktop PC.  When I turn on the power turns on and gives a series of long beeps my monitor turns on and then says "monitor going to sleep" and nothing else happens.  I can't ' seem to get to a screen where I'm able to do anything.  Does that mean I have a virus?   Any ideas how to fix it.  I have everything turned off and restarts but still no luck.    I use Windows Vista. Thank you

  Hello

  That sounds like a hardware error and you need a real computer store (no leeks and glances at a BestBuy or)
  a BigBox store) or system manufacturer support.

  HP support
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Satellite L350 - D 215 black screen with blinking cursor

  Satellite L350-D 215 black with cursor flashing screen - it worked fine said he had to restart and that's what happened, I can't in windows allows any single me in bios and Boot Manager.

  I am looking for help to solve this problem. I don't know what went wrong, my warranty runs out on December 26, 2010 so if I can't fix it myself can I have return to toshiba to fix. I'm at a loss as to how to solve this problem, I have no disk for laptop recovery.

  I tried the fix when you remove the battery and press the power button to 30 seconds doesn't not work, also tried leaving a few hours without battery and tried plugging in to power same, toshiba screen and only boot in the bios etc usually let HDD boot in windows only in black screen and blinking cursor.

  Any help much appreciated. I saw the restoration of disks for £9.95 on a Web site for the machine so don't know what to do... totally empty.

  Hello

  I agree with Akuma.
  Blinking cursor means that the Windows OS can not be loaded / booted up.
  You need to reinstall new OS.

  If you have a Microsoft windows CD you can use this disk to reinstall the operating system. The necessary drivers can be downloaded from the Toshiba page.
  Otherwise, you would need order a recovery disc Toshiba from here:
  https://backupmedia.Toshiba.EU/landing.aspx

  Welcome them

• After logging on my Satellite Pro only black screen and the cursor are visible

  I have a windows vista pro (PSAASE-00G004GR) satellite after turn on and typing the password for windows vista, the screen goes black but I see that the cursor moves & because it seems that the hard drive also works in th background, but I can't see anything except the mouse cursor , I tried to boor with other options (LAST WORK safe MODE KNOWN FEATURES... etc) but it's still the same only black screen and the cursor...

  I do not prefer the product cause of my data recovery on this subject, any ideas?
  thnx

  Hello

  You have the Satellite Pro A100 PSAAS hmm if you want to save your personal data, I recommend to remove the portable computer HARD drive and try connecting it to another computer via an external USB HDD controller. These cases of 2.5 HARD disk are not expensive and you can buy it in every store of the computer.

  Then you could try to recover the laptop delivered together with the Toshiba Recovery CD.
  But wait; have you tried to connect the laptop to the external display?
  Check it!
  Maybe you could see something on the second screen.

  I think that this procedure could be useful to clarify what s wrong.
  To me this question looks like a small little dysfunction of the FL inverter.
  In this case the installation of the new operating system will help you not to solve this problem.

  But who knows the verification is necessary to find what could be wrong.

  Good luck and bye ;)

• My computer has a black screen and a cursor and there is no menu start more

  Original title: replay Vista operating system

  What I would like to know, is my computer only has a black screen and a cursor, there is no menu start, so I can stop and start a new installation of windows vista? If anyone can help please. I thank you very much for your time and have a fantastic day. Shawn

  Hello

  What changes have been made on your machine for there to be a black screen with a cursor?

  Rather than doing a clean install of your operating system, I suggest you do the following.

  Step 1:

  Remove all external devices (printer, USB flash drive), as appropriate, and start your computer again and check.

  Step 2:

  If this is little help, start your machine in safe mode and check if it starts on the desktop.

  Let us know the status of the issue.

  Azeez Nadeem - Microsoft Support [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Tecra M2 - black screen with blinking cursor

  Hi guys,.

  Im hoping someone out there might be able to help me fix my laptop.
  Ive read a few posts, but not sure they can help me.

  When I swicth on my Tecra M2, I just end up with a black screen with blinking cursor top-left, or I get a screen filled with a mix of 0 and 1.
  Sometimes the home TOSHIBA screen appears with the boot options, other times it doesn't.

  I can't boot from a CD and it does not start on the HARD drive. Ive took the HARD drive on and the CDROM outside but it does the same thing that suggests to me that its does not get via the BIOS as far as the boot sequence.

  This sounds like failure of the BIOS for you and you know a way to fix it? Ive tried to take the battery, turn off and start again, but the same thing happens.

  Any advice would be appreicated.

  Thank you

  Ross

  Hello

  The cursor blinking in the upper left corner is known to me.
  I got a same problem or question may be similar.
  My laptop (from another manufacturer) didn t start but only the cursor appeared.

  In my case, the HARD drive was dead, and the operating system could not be loaded.
  In your case, the HARD drive may be dead, but usually the laptop must be able to boot from the CD/DVD drive so I m wondering why you are not able to boot from the disk
  However, the first of all what you need to check if the HARD drive is listed and recognized by the BIOS.

  Press ESC, then F1 to access the BIOS.
  You can also set the BIOS to default settings too.

  If the HARD drive is not recognized, you should replace the HARD disk.

• Help, please! black screen with blinking cursor...

  my screen said to check the file system on D the type of file system is NTFS volume lable in recovery, one of your disks needs to be checked for consistency.  You can cancel the disk check, but it is strongly recommended that you continue. Window to check the disk, then there a blue screen that says it was shut down to avoid damage and that a crucial thread in the system operation is released or terminated and to check the hardware or software that can be installed properly, then he did a crashdump and completed it. then he went to a black screen with a cursor of Charlotte on top and that's all he does now when I turn on the right after Gateway logo, he goes to this black screen with blinking cursor. What anddo which has happened, I hope or is this a lost cause? Help, please!

  Hello

  No saving necessary data and re-installing Windows Vista might be the best option, but here
  are a few others.

  You can save your files by putting the drive in another computer as a 2nd disk (best) or external
  Drive USB enclosure and then backup to removable media such as CD, DVD or other USB drives.
  Of course a real store of the computer or the manufacturer of your system can help to recover the files.

  Or you can use a boot Ubuntu CD to back up data.

  Use Ubuntu Live CD to backup files from your Windows computer dead
  http://www.howtogeek.com/HOWTO/Windows-Vista/use-Ubuntu-Live-CD-to-backup-files-from-your-dead-Windows-computer

  --------------------------------------------------------------

  You can access Mode safe? Repeatedly press F8 as you start? If yes you can try Control Panel - device
  Manager - graphics card - Double click on - driver tab - click on UPDATE driver - then right click
  on devices and UNINSTALL - REBOOT.

  A method to try to get to the desktop (try in normal Windows Mode without failure) is CTRL +.
  ALT + DELETE - Manager tasks and tab process EXPLORER.exe and COMPLETE the PROCESS on this subject - and then
  on the Applications tab - lower right - new task - type in EXPLORER.exe. Safe mode is available by
  repeatedly tapping F8 as you start. CTRL + SHIFT + ESC also begins the Task Manager.

  First check this thread in case it is simple and if not to come back to this thread.

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/50247d5e-0ae0-446c-A1bd-11287fd1478a

  Black screen problems are extremely difficult to repair and all patch is usually on a base hit or miss.
  That there is no information on a black screen as it is on a blue screen just adds to the
  Difficulty. Often using a restore point or Startup Repair will have no effect. You can try a
  Google to see the proposed repairs, whom some have worked however these cover a wide
  field efforts.

  Here's a video of one of them.

  http://www.Google.com/search?hl=en&q=black+screen+of+death+Vista&btnG=search&AQ=f&OQ=&AQI=G1

  Here's another fix
  http://blogs.PCMag.com/SecurityWatch/2008/12/the_mysterious_black_screen_of.php

  You have a Vista disk? You can try restoring the system to it. If you don't have the disks your
  system manufacturer will sell them at low prices. Or try in safe mode if you can get there.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can create a recovery disc or use someone even version (making the system restore it)
  must be bootable).

  How to create a Vista recovery disk
  http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

  ------------------------------------------------

  These require the correct Vista discs since you can not start safe mode.

  Try the Startup Repair tool-

  This tells you how to access the System Recovery Options and/or with a Vista disk
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  -----------------------------------------------

  Here are a few Google searches where many have found different solutions:

  Vista black screen - check that a 1st
  http://www.Google.com/search?hl=en&source=HP&q=Vista+black+screen&AQ=f&OQ=&AQI=G10

  Vista black screen Solution
  http://www.Google.com/search?hl=en&q=Vista+black+screen+solution&AQ=f&OQ=&AQI

  Vista black screen Fix
  http://www.Google.com/search?hl=en&q=Vista+black+screen+fix&AQ=f&OQ=&AQI

  -----------------------------------------------

  If necessary and you can access all ordinary Windows.

  You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation
  (if all goes well, the data records and need to reinstall programs). Be sure to do a good backup or three.

  You can use another DVD that aren't copy protected but you you need to own
  Product key.

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  If nothing works, you can make a repair facility that must save the data but you will need to
  Reinstall the programs. This also requires correct Vista disks especially for OEM versions. You will be
  need to know your product Code.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-console

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  ---------------------------------------------------------------------------

  Another method that works sometimes: at the command prompt, type of Vista startup disk:
  (a line type or copy and paste one line at a time and hit enter - enter a bracket)
  or "BOLD")

  c:

  cd\

  CD c:\Windows\System32\winevt (there is a space between cd and C :)

  Ren LogsOLD Logs (there are spaces between ren and newspapers and Logsold)

  RESTART Windows

  I hope this helps.

• Invalid product key, left my computer with a black screen and a cursor of the mouse on the boot.

  A few days ago, I tried to upgrade Windows 7 Home Premium (64 bit) to Windows 10 using the free update. Installation hung at 84% for 2 hours, then restarted, was unable to recover the installation and then could not get back to Win 7. This left us with a black screen and a cursor of the mouse on the boot. The computer would remain in this State for about 10 minutes and then reboot and repeat.

  Fortunately, or so I thought, I had a few CD Windows installation backup from the back to the era of digital river. So I thought I'd install fresh on my empty partition, copy my files and data, and then format the partition with the installation broken on.

  I did, but now he tells me that my product key is not valid and cannot be activated. The product key came on a real label on the PC when we bought it.

  The key is for X 16-96072. I installed X 17-58997 (Windows 7 Home Premium x 64 with SP1 (u)). I don't know what is the problem with the key? Should I have installed without the (u)?

  One key 25 digits grouped in 5 sequences of 5 characters not X 17-58997.

  To analyze and solve problems for Activation and Validation, we need to see a full copy of the diagnostic report produced by the MGADiag tool (download and save to the desktop -http://go.microsoft.com/fwlink/?linkid=52012 )
  Once downloaded, run the tool.
  Click on the button continue, after a short time, continue button will change to a copy button.
  Click the copy button in the tool (ignore the error at this stage) and then paste (with r-click and paste or Ctrl + V) in your message.

• Satellite L300 - black screen and a cursor flashing at the top left

  July 11, 2010
  My computer purchased on March 7, 2009.

  I don't know if there is a problem of tension, but there is certainly a problem of heat and since I bought it, almost constantly overheating. For about 2 months, it became more slower to load the desktop. For about 1 month, the operating system found himself in a cycle of rebooting - rebooting repeatedly instead of start normally.

  On July 11, 2010, the Windows XP operating system would not start. Lit black screen, blinking cursor in the top left. The computer does not have a Windows startup disk and won't start not in: -.

  Safe mode
  Safe mode with networking
  Safe mode with command prompt
  Last good Configuration known (most recent settings that worked)
  Start Windows normally
  System Restore - will not give access.
  Recovery console - the Windows XP CD will start and provided access to the Recovery Console called tool. Operations: -.

  Difficulty in a Boot.ini file that is damaged - YES
  Difficulty a corrupt partition boot sector - YES
  Difficulty of a corrupt master boot record - No.

  I pressed F2, F8, F10 and F12.

  Hello

  It seems that something was tangled up in your Windows installation and the computer can no longer start t.

  In this case, you have only one option and that s reinstalling Windows. Therefore, you can take the (better) Toshiba Recovery disk or a Microsoft Windows XP disk. It will restore factory settings and your computer is read to use again.

  Check this box!

• Satellite Pro C660 - black screen and a cursor flashing during startup

  When my laptop start, after it shows the press f2 or f12 and then from windows, it goes to a black screen with the cursor blink.

  The lights are on at the front, but there is no activity on the hard disk, such as the indicator light does not blink.

  Need help. Thank you.

  I think that your HARD drive is dead.
  You need to replace the HARD drive with a new 2.5 SATA HDD.
  Replace the HARD drive and install the OS by using Toshiba recovery disc.
  I hope you ve created one in the past

• Windows 7 build 7600, windows 7 is not genuine. black screen and no internet connection. Help!

  Help, please. the lower right corner of the screen says windows 7 build 7600. Windows 7 not genuine. I have a black screen and I have no internet connection. Help, please

  Have you tried to restart by phone?

  Activate Windows 7 manually:
  1. click on start and in the search for box type: slui.exe 4

  2. press enter on your keyboard

  3. Select your country.
  4. Select the telephone activation option and brace yourself for a real person.
  http://support.Microsoft.com/kb/950929/en-us

  Please run the Microsoft Genuine Diagnostics Tool then copy and paste the results into an answer here for further analysis:
  http://go.Microsoft.com/fwlink/?LinkId=52012

• Black screen with blinking cursor

  So today I started my computer normally and I was doing my normal activities for about 5 minutes before my computer automatically shut down and restarted. After the flash blue HP screen, it goes to a black screen with a cursor blinking in the upper left. If I tap Ctrl + Alt + Delete it just goes back through projection and the black screen again.

  The only options on the splash screen that works are the program installation, diagnosis and menu start. For some reason, hit F11 to restore the system does nothing and it will pass just to the black screen. Another strange note is that simply type the power button it will stop, I don't need to keep it.

  To the extent the why in this case, the only reasonable explanation would be that I had a virus. Malwarebytes was telling me "svchost.exe" meant any activity suspected and I did a complete analysis of the system yesterday, he finds and supposed to be deleted the svchost.exe and I did a reboot. After reboot, it came to a black screen and proceeded to do some sort of check disk or something. After that, it was fine, but I closed it down last night and this morning, the question arose.

  I'm not really good with computers, I went into the BIOS and tried to restore the default values. As far as I know he recognizes the hard disk. Verification of diagnosis completed without finding any problems. I removed all USB devices and it always goes to the black screen.

  I am running Windows 7 64 bit. I have no recovery disks.

  If anyone has knowledge or they can share advice, it would be much appreciated.

  Hello

  Boot from the new rescue CD, select repair your computer and choose the command line.  When this charge, enter the following commands and press on enter after everyone – including spaces as shown.

  Bootrec.exe

  bcdedit/export C:\BCD_Backup

  c:

  Boot CD

  BCD attrib s h - r

  Ren c:\boot\bcd BCD.old

  Bootrec /RebuildBcd

  Bootrec /fixmbr

  Bootrec /fixboot

  Remove the rescue CD and try to restart now.

  Kind regards

  DP - K

• Windows 8 black screen and the cursor after the connection

  Hello. I tried to upgrade to 8.1 Windows 8 Windows and it is stuck on like 3% for one hour, so I just rebooted the computer and he returned to Windows 8. I'm going to sleep and come back the next day and go on my laptop and it auto connects me and it goes to a black screen and I only have the slider on the black screen after login. I don't see the start menu, but I receive notifications for as sticky keys or any other notifications lights. I turned off my computer at least 20 times, took out the battery, empty the battery and tried to boot in safe mode with no luck. It is unlikely that it is an internal problem, because if I leave my computer alone for a few minutes, my screen saver photos appear. If anyone can help me solve this problem or help me get in easier safe mode would make things less stressful. I have an Acer Aspire V5 - 571 series. Thank you.

  Hi Roy,

  This problem may occur because of corrupted on the computer boot files.

  I suggest you to perform the checking and automatic repair if this solves the problem.

  If you do not have a DVD of Windows 8, I suggest you check out the link to see how to create an installation of Windows 8 media:

  http://Windows.Microsoft.com/en-in/Windows-8/create-reset-refresh-media

  Follow the methods suggested below:

  Method 1:

  Start on the recovery environment using the installation of Windows 8 media.

  Follow the steps below:

  Note: before proceeding further, make sure that the boot priority is set on DVD drive in BIOS. BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  • Insert the DVD to install Windows 8 on DVD-ROM and restart your computer.
  • After you start your computer by using the Windows DVD or the system repair disc, a black screen is displayed with the gray text "Press any key to boot from CD or DVD". Press a button on any.
  • Select the type of keyboard and good time.
  • Click repair your computer in the lower left corner.
  • Select Troubleshooting in choose an option screen.
  • In Troubleshooting screen, click Advanced options .
  • Click the automatic repair of the Advanced Options screen.
  • Then choose the operating system.
  • Windows 8 will then pick up questions on the hard drive and check that all required files are intact.

  If the problem persists, proceed to the next method.

  Method 2:

  Follow these steps to perform a system restore:

  • After you start your computer by using the Windows DVD or the system repair disc, a black screen is displayed with the gray text "Press any key to boot from CD or DVD". Press a button on any.
  • Select the type of keyboard and good time.
  • Click repair your computer in the lower left corner.
  • Select Troubleshooting in choose an option screen.
  • In troubleshooting screen, click Advanced options .
  • Select System Restore.

  For reference:

  http://support.Microsoft.com/kb/2756559/en-us

  Note: BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Please let us know the results.