Satellite L300-1BD - output does not work VGA

Similar Questions

• Satellite L300 (PSLB8C-0H901X) does not work

  My laptop Toshiba Satellite L300 PSLB8C-0H901X, does not work, no power, no MESSAGE, nothing, lamp power and charge Get when pluged into anything else, any known issues? All the fixes, thank you in advance for your help.

  Of course, your laptop is completely dead. In such situation, there is no magic solution and I m afraid that you need professional help. If there is absolutely no reaction is maybe defective electronic power supply and the motherboard must be exchanged.

  As you know this is part more expensive so you need to check if this is the solution for you.
  Call, explain the situation and let it check your laptop.

• Satellite L300-190 - Wireless does not work in Ubuntu 8.10

  Hello

  I recently bought this Toshiba Satellite L300-190 (PSLB8E-014008N5) of the machine.
  First of all, I tried to install Ubuntu 7.x, but which failed due to a problem of graphics card. So I try the new version of Ubuntu 8.10, everything works fine, except wireless. There is no detection wireless in there.

  I tried through the Ubuntu forum, but still no luck. Please help me if you can provide me with a good driver or can guide me as well.
  I await your response.
  Ali

  Great news. Thanks for the link.

• Satellite L300 - output does not work VGA

  I'm trying to set up a media center via my laptop Toshiba L300 to connect it to my VIZIO 37 "LCD via the port VGA (RGB) for the component in the TV.

  I connected everything, but consistantly TV says 'no signal '.
  Is there something I do not correctly?

  The control panel says also there is only one monitor installed on the laptop and I tells me that he is supposed to be two installed that television is one of them.

  Can someone shed some light on this for me?

  Hello!

  That's great, thanks for the comments.

  Good bye

• Hot satellite L300 - function key does not work

  After the superb help I got from Jimi, I hope I can solve my problem last, I changed my OS from Vista to Windows XP Home edition and I managed to get all the drivers working even if some on the site of Toshiba don t work like Wi - Fi, I managed to acquire other places. Alone, I can't get to work is the shortcut keys, it says TOSHIBA COMMON MODULE NOT FOUND! Everything else works OK after using Nlite (cracking bit of Kit)

  My laptop is Sat L300 - 1AQ model PSLB8E-OOKOO

  Thanks a lot for your help

  Then, visit the Toshiba download page and check for common Modules. There is version 1.00.05. Download and install it.

• Satellite L300: FN F8 does not work to activate Bluetooth

  Thanks for your reply and sorry if I speak very well English.
  I bought 3 Toshiba L300 PSLBGE and after installing Vista, I tried to install the battery blueetoth.
  After a few minutes, the installation program ask for me to plug in the unit (it is built) and to do this I press Fn + F8 but it doesn't work.
  I'm sure that there is a built-in bluetooth device because it has the logo on the box (and also on the bottom of notebook).
  What can I do? Thank you.

  Hello

  Make another function of FN keys?
  Have you installed all necessary drivers that would allow the FN button functionality?
  Installation of battery BT over properly?

  Why you do not use the Toshiba preinsatlled OS?

• Satellite L300-11V - Internet does not work after you remove software

  Hello

  Internet my brother no longer works. We believe that it is because he took off a bunch of software/programs to free up space.

  He said that the problem is
  ... "There are problems of hardware or driver with the network card"Realtek RTL8101 Family PCI - E Fast Ethernet NIC (NDIS 6.0)"on this computer".

  Can someone please tell me how to solve this problem, or what to download?

  The laptop is a Toshiba Satellite L300D-11V

  Thank you

  Hey Buddy

  This error message is that you need to reinstall the driver for the network card. You can get this driver on Toshiba page:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  If you have installed the latest version of what the Internet should work again! :)

• Satellite L300 PSLBGE webcam does not work

  Just bought my first toshiba laptop. After you install the Chicony webcam driver I see more info - that the system requires to install CNF7051 device driver. And in my device manager, I see such a photo.

  [http://i014.radikal.ru/0910/54/00a1ca91bed7.jpg]

  Please help me how to solve this problem?

  Hello

  I don t know Russian and therefore, the screenshot is not really useful (because of the different letters)

  But you can use this provider PCI database to determine which device driver is necessary:
  http://www.PCIDatabase.com/

  Here you can search the Vendor ID and Device ID which you might find in device-> properties from the Device Manager

• Satellite A10 S203: sound does not work - just enough

  Hello!

  To my satellite A10 S203 sound does not work, I updated my sound card and the bios but nodifferents. Nothing in the system that says that I have something wrong whith my sound is just enough. I tried speakers headphones and challenging systemsounds, mp3, Auidi direct works cd... nothing.

  Any tip?
  [email protected]

  First check the status of the sound card in Device Manager.
  If there is a yellow climbing brand then you should try to reinstall the driver. (first remove it and after reboot, install a new)

  Have you checked the volume setting and the site of laptop? Eventually he s a very simple idea, but believe me, I read many comments here in the forum and a lot of guys forget this option simply.

• Computer laptop Toshiba Satellite A200, Vista, microphone does not work! Any help please!

  Computer laptop Toshiba Satellite A200, Vista, microphone does not work! Any help please!

  Hello

  Check with Toshiba support, online documentation and drivers (update or reinstall), and
  ask in their forums.

  Toshiba - Forums
  http://laptopforums.Toshiba.com/

  Toshiba - Contacts
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contact

  Toshiba - drivers - access your model
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

  Toshiba - Support
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  ========================================

  How to activate Audio devices hidden in Vista and Windows 7
  http://www.Vistax64.com/tutorials/143447-audio-device-enable-hidden-devices.html

  Connect one microphone, music player or other audio device to your computer (you want to be sure
  the mic input is enabled)
  http://Windows.Microsoft.com/en-us/Windows-Vista/connect-a-microphone-music-player-or-other-audio-device-to-your-computer

  -----------------------------------------------------------------------------------------------------------------

  Pilots may also need to be updated:

  Control Panel - device - SOUNDS - look for HD Audio Manager - Mine said RealTek high definition
  Audio (this is an example and you can have an other name/maker).

  Make sure you write down the description and model double click top - tab drivers - write version. Now
  Click on update drivers who cannot do anything like MS is far behind the certification of drivers. Then RIGHT
  CLICK above and UNINSTALL - REBOOT - this will rebuild the driver stack.

  If your driver shows 06 you have the default windows and part of the question.

  Go to the system manufacturer's website and get the latest Audio/Sound drivers - download - SAVE - go to the place where you
  Put them - right click on Reboot - RUN AS ADMIN -.

  Check the Version tab of the driver in the Device Manager as the restoration of the sound card drivers often
  and then install the latest version. Restart and check after each test, not
  rare to have to run the pilot of 1 to 4 times or more. Just the version make sure you
  installed shows upward on the tab of the driver.
  
  Then navigate to the site of the manufacturer of the device and search for the drivers more recent and repeat the installation procedure.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  ---------------------------------------------------------

  After the updated driver.

  Click with the right button on the speaker near clock - recorders - right click in the box - check see the
  Disconnected devices and show disabled devices - check your micro - highlight
  then on lower right properties. Make sure that the appropriate injector is selected and check
  other parameters - levels tab make sure that MUTE is disabled and APPLY / OK to change.

  Also in the search for some Audio Manager Panel (perhaps named after the manufacturer of the sound driver). Mine
  is the RealTek Audio Manager, yours can be quite different name if you have one.

  How to activate Audio devices hidden in Vista
  http://www.Vistax64.com/tutorials/143447-audio-device-enable-hidden-devices.html

  Connect one microphone, music player or other audio device to your computer
  http://windowshelp.Microsoft.com/Windows/en-us/help/b0e3d7fb-1b4a-4926-8254-65da289209261033.mspx

  Problems with sound and audio or no sound - a Mr Fixit
  http://support.Microsoft.com/GP/NO_SOUND

  I hope this helps.

• Satellite L300 - 1 9 does not start safe or normal mode

  Hello

  My computer does not load to the top of the security mode or normal mode.

  Although Macafee, my virus protection software provider believe their recent problems are to blame they have offered no solution and instead asked me to load windows with my "installation disk".

  I can't find it, where to do it? (p.s. my computer is the Satellite L300 - 9 1 series.

  Thanks in advance.

  Hello

  If you are not able to start Windows try first HARD drive recovery option:
  http://APS2.toshiba-tro.de/KB0/HTD9102IR0000R01.htm

  If this does not work, you need the recovery disc you can order here:
  https://backupmedia.Toshiba.EU/landing.aspx

  Welcome them

• Satellite U920T - function keys does not work after update to Win 10

  Hello, good morning / evening...

  I use (U920T satellite) and recently updated my Windows 10 Tablet
  but after that, the function keys, volume, brightness, key FN and even the backlight does not work anymore!

  I tried to restore the system and update the driver software but nothing has worked...

  I use these keyboard shortcuts all the time and now it's really hard without them!

  What is the problem? What should I do?

  The problem is that U920T satellite is not listed as Win 10 support unit and, therefore, drivers earn 10 Toshiba and software that controls the FN keys is not released.
  But as far as I know using the FN keys, system of Toshiba and the Support of Flash Card Utility driver must be installed.

  For all Toshiba units win 10 supported, the drivers can be downloaded from this page:
  http://win10upgrade.Toshiba.com/swup...SPX?region=TEG

  Maybe you can try the drivers released for other models of portable Win 10 supported...
  I'm not sure if the software will be compatible with your model of U920T, but its certainly worth a try...

• Installation of Ubuntu 14.04 on Satellite NB10t-A-101 does not work

  Hello world

  Sorry for my English: it is not my mother tongue. I'll try to explain my problem.

  I would like to install Ubuntu 14.04 on my computer (Toshiba Satellite NB10t-A-101), but it does not work.

  I boot on my USB (made with RUFUS), but it works once for each five times.

  After you install the operating system, when I restart the system, the computer does not find an operating system (I precise that I already check the EFI BIOS and disable secure boot)

  How to install Ubuntu?

  Hello

  This series of portable was equipped with a processor Intel Celeron 2810 n and this CPU belongs to the new Intel BayTrail platform.

  The * Intel deposit path * allows only the installation and utilization of systems capable of UEFI as Win 8 or 8.1 Win

• Satellite A500 - 14Q - Microphone does not work

  I have the Toshiba satellite A500 - 14Q for about 3 years. I changed the hard drive, keyboard, frame of the monitor until now, and I'm sick and tired of this laptop does not properly. Now, I've discovered that my microphone does not work. There is no problem in device, or with the driver manager. I hear that crackling noise when I try to enter any other micro device.

  Can anyone help please?

  P. S. I have windows 7 (64-bit)

  How did you test the mic feature? With the help of tool tape recorder?
  > the monitor framework
  Perhaps you have made a mistake and mic is not connected correctly. Did you do it alone or it was done by the Toshiba authorized service provider?

• Satellite A210 - FN buttons does not work on Windows 7

  I have a problem, just install Windows 7 Build 7100 (fron upgrade Vista 32 bit) and the fn on my Satellite A 210 does not work corectly.
  It only works with the action of the num pad, other functions does not work.

  What should I do to make it work?

  It seams that I have problems with the actions of Toshibas tool whitch controls but I can't find name to update...

  Hello!

  I put t understand why Windows 7 is so popular right now it s only a beta version

  However, I think that the reason for this is why no Toshiba tool is available at the moment, but I can understand that because Windows 7 is not yet out.
  You can try to install the package of value added. This is for Vista, but maybe it works also on Windows 7 being the most drivers for Vista works on Windows 7 too.

  Consult the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Good bye