Satellite L300-1BV - error windows could not start

When I try to start the laptop it know
"Unable to start windows. To address the recovery of insert problem disc etc, but I have nothing of this
below it I got an error message

file: \windows\system32\winload.exe

STATUS: 0XC000000F

Info: the selected entry could not be loaded because the application is missing or corrupt

can anyone help?

Of workaround I posted in another thread, but it should work in your case too.
Try this:

Press F8 immediately after that the laptop has been turned on.
Then choose the first option called fix my computer.
Then a new window should open and there you can choose the option called Toshiba recovery.

Please note then this procedure would start the Toshiba HDD recovery and the BONE to relocate again. This would be to format the whole HARD drive and set the OS to the factory settings.

Goodbye & good luck

Tags: Toshiba

Similar Questions

  • Message error "Windows could not start the Windows Firewall on the Local computer.

    I was check the status of the Windows Firewall and I got a message saying "update your firewall settings" and "use recommended settings" option. However, when I click on this option, my cursor is occupied for a while, but nothing happens then.

    I tried from Windows Firewall in the list of Services, and I got this error: ' Windows has no start Windows Firewall on the Local computer. " For more information, see the system event log. If he is a non-Microsoft service, contact the service vendor and refer to service 13-specific error code. »

    I also tried to fix problems using Windows Fix - It, but these two problems were still attached. Help, please.

    Thank you.

    If you have a malware infection in not too distant past, this could be a relic.

    First, run Disk Cleanup to rid the system of temporary Internet files. These can seriously slow down a Malwarebytes scan.

    Then run Malwarebytes.

    http://www.Malwarebytes.org/

    Time of installation, make sure that you do not check the box to install the trial PRO version...

    How to use Malwarebytes

    http://www.bleepingcomputer.com/virus-removal/how-to-use-Malwarebytes-anti-malware-tutorial

    Follow-up to the ADW cleaner...

    http://www.bleepingcomputer.com/download/adwcleaner/

    Do NOT click on the GREEN download button because it will bring only sadness. Use the right BLUE button below.

    When you are satisfied that there is nothing wrong in the system, re-run Windows patches...

  • "When restarting, get the error, Windows could not start because the following file is missing or corrupt: < root Windows > \system32\ntoskrnl.exe.

    Original title: black screen

    Attempt to restart the Gateway system running XP Pro.  The message "Windows has not start because the following file is missing or corrupt: \system32\ntoskrnl.exe" Please reinstall a copy of this file.  What do I do and where is this file?

    There is a good chance that the disk check running the Recovery Console will solve the problem.

    1. Insert the Windows XP CD in your CD-ROM drive and restart your computer. If you are prompted, select any options needed to start (boot) on the CD.
      
    2. when the text portion of Setup begins, follow the prompts. Select the repair or recovery option by pressing R.
      
    3. If you have a dual-boot or multiboot system, select the installation that you want to access from the Recovery Console.
      
    4. When you are prompted, type the administrator password. If you have not set a password for the account admin simply press on enter
      
    5. at the command prompt, type chkdsk/r > press ENTER. (Note: there is a space between the slash and the letter k).
      
    6. at the end of the output of scan type > press ENTER.
      
    7 restart your computer.

    If you do not have a Windows Xp disk, follow the instructions HERE to create a Windows Xp Recovery Console

  • F11 Recovery not working - error Windows could not start

    After downloading MS updates do not work password administrator. I try to retrieve F11 and see the black screen: cannot start windows. A recent hardware or software change might be the cause...
    File: \windows\system32\winload.efi
    Status: 0 x 0000001
    Info: The application or the operating system could not be loaded because a required is missing or contains errors.

    ? Any ideas?

    It is unfortunate that you do not recovery media, create little once you have activated your Elitepad 900 HP recommended here.

    I recommend that you do one of two things:

    (1) bring your Elitepad 900 Mediamarkt and ask for help to solve the problem or an Exchange.

    2) Contact HPfor assistance

  • PC with Windows Vista does not restart after installing updates, "Windows could not start...". "File:\Windows\system\winload.exe status: Oxcoooooof.

    Last night, I installed Windows updates on my HP Pavilion dv6227cl and now Windows will not boot.  I get the message "cannot start Windows.  A recent hardware or software change might be the cause.  File:\Windows\system\winload.exe status: Oxcoooooof Info: the selected entry could not be loaded because the application is missing or damaged.  I DO NOT have the Windows Setup disc.

    Hello

    I suggest you borrow the CD of windows vista to your friends

    Method 1:

    Step 1:

    I suggest you check in safe mode.

    Start your computer in safe mode

    http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

    Step 2:

    If you be able to start your computer in safe mode, I'd say make clean boot and check.

    Place the computer in a clean boot state, then check if it helps. You can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.Microsoft.com/kb/929135

    Note: After troubleshooting, make sure the computer to start as usual as mentioned in step 7 in the above article.

    Method 2:

    I also suggest you to see link and check.

    Error: Windows could not start. A recent hardware or software change might have caused the problem after installing Windows updates

    http://support.Microsoft.com/kb/2674065

  • Satellite C660D froze and won't start - Windows could not start

    OK, enough of the more dense person you will ever likely to meet when it comes to things like that. but will try my best to explain.

    There are a few days that my laptop has frozen on me on me having to turn it off and start it again by the power button. When I started again the message below appears.

    WINDOWS ERROR RECOVERY
    Windows could not start. A recent hardware or software change might be the cause.
    If windows files have been damaged or misconfigured in, Startup Repair can help diagnose the problem, if the power was interrupted during startup upward, choose start windows normally.

    -Launch start repair (recommended)
    -Start windows normally

    When I press launch Start up repair that it goes to a screen with a big cursor (that you can move) but nothing happens.
    When I pressed the start windows normally put it went through the windows logo while starting but then stops at this point.

    My question is, is - this easy to fix & if not where is the best place to consider to get fixed. Said I was dense enough: p

    Thanks for looking

    Dean

    > My question is, is - this easy to fix & if not where is the best place to consider to get fixed. Said I was pretty dense

    I think its easy to correct, but you'd need a Toshiba recovery disc.
    Have you created one in the past?

    If not, try to start the HARD drive recovery: turn on the device, press F8. Now choose fix my computer.
    Now new window should open, and here you must select Toshiba HDD recovery option. This would create the laptop back to factory settings.

    In case this isn't possible, you will need to boot from a recovery disk to reinstall the system.

  • Windows could not start on Satellite L510

    HI :)

    I'm not very tech savvy, I've only had my laptop a month. And yesterday, when I turned it back on I got this message...

    Windows could not start. A recent hardware or software change might be the cause. To solve the problem: Insert your windows installation disc, and then restart your computer
    If you do not have the disk, contact your manufacturer computer or system administration.

    file: \boot\bcd
    status: 0x000000f
    Info: an error occurred trying to read the boot configuration

    I have been all over these forums and the internet looking for a solution, but no luck. It's the weekend, so I can not communicate with the service line.
    I would appreciate a process step by step what it is, that I need to download or reset. I do not have the windows installation disc, because it did not come with my laptop.

    I really appreciate your help in advance ;)

    Hello

    Well, the error message says everything to me. Insert the Windows disk * or * contact manufacturing (Toshiba). ;)

    By the way: it would be interesting to know if you can boot into safe mode. Check it!
    If so, you may start the HARD drive recovery. Therefore, select Repair my computer in the Advanced Start menu and follow the instructions on the screen.

    Yes, with the laptop didn't come a disc, but you can create one!
    Please read the operating manual always first.

    Now it s too late to create such a floppy, but you can order directly into a new Toshiba:
    https://backupmedia.Toshiba.EU/landing.aspx

  • I have error #1053 windows could not start the printer spooler. Help

    Windows could not start the printer spooler. I received the error #1053.
    whatever it is sent to the printer never finished loading and crashes to the top
    my computer, so I have to re - start.

    This forum is for posting comments on the web site of Microsoft Answers, is not for technical questions.  Ask your questions to http://answers.microsoft.com/en-us/windows/forum/hardware, making sure that you specify your Windows version in the drop-down lists at the top.

  • Windows error recovery. Windows could not start... _

    My Dell laptop I have from 10th July indicates the following:

    Windows error recovery

    Windows could not start.  A recent hardware or software change might be the cause.

    If windows files have been damaged or misconfigured, Startup Repair can help diagnose and fix the problem.  If the power was interrupted during startup, chose to start windows normall7

    Start the reboot system (recommended)

    Start Windows normally

    The two options to return to the same screen.

    I tried the menu under the F keys, but all options listed do not seem to do anything.  I talked to Dell who ran a diagnostic test on the portable equipment and everything was ok.  They wanted then £70 the issue above which I am unhappy that have not had the laptop for a year yet!

    I would be very grateful if you could help!

    Thank you

    Mark

    Hello mtb123,

    1. have you tried the steps suggested by Srinivas R in the previous post to make a startup on your computer repair using the Windows installation disc?

    2. you remember what changes you made to the computer before you start this error?

    I suggest that you access the system recovery options using a Windows Vista installation disc and do a startup repair and if this fails, you can do a restore of the system from the Windows recovery environment.

    You can see the previous post of Srinivas R to verify the information on the system restore.

    http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

    Thank you
    Irfan H, Engineer Support Microsoft Answers. Visit ourMicrosoft answers feedback Forum and let us know what you think.

  • Windows could not start the background service Itelligent transfer service on local computer. 87 error: The parameter is incorrect

    I had a crash dump blue screen, tried solutiions to the problem and told me to go to windows update and download all windows updates. downlownloading all updates failed and I got the error.

    Code 80246008

    Click on get help with this error and was instructed to go to services and start the background intelligent service services, it gave me the error message;

    Windows could not start the background service Itelligent transfer service on local computer. 87 error: The parameter is incorrect

    Not very computer savvy! no idea what it all means or what I would do to this topic! Thanks a lot for any help

    Try this:

    To change or restart the Service (BITS) Background Intelligent Transfer

    1. Open administrative tools by clicking the start , clicking Control Panel, clicking system and Maintenance, and then clicking Administrative Tools.

    2. Double-click Services. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

    3. Right click on the service of Intelligent Transfer (BITS) background and then click Properties.

    4. Under the tab general, next to startup type, make sure that automatic (delayed start) is selected.

    5. Next to Service status, check whether the service is started. If not, click Start.

  • Windows Vista: windows could not start error. is suspended from the "Microsoft Corporation" loading bar then black screen BIOS not acpi compliant

    After you have installed the driver for the zune hd, I was asked to restart my computer. After the reboot, start froze on a white screen. I've seen this before and it is usually because of some connected usb components. so I manually powered down the Tower, disconnected the cable from zune and restarted. This time a screen saying that windows could not start, "launch Startup Repair tool" was recommended. Select this habit makes the startup hang to the progress bar from Microsoft corporation, then to a completely white screen. Although strangely, once only a blue error screen appears which says that the BIOS is not acpi compatible. I can't restart with F8 to go into safe mode, "windows error recovery" still appears. "Start windows normally"produces the same results as the tool to restart launch system. " I have a drive to upgrade to windows 7 and a windows XP upgrade disk. the disc of windows 7 hangs at "starting windows" and the XP disc gives a blue screen error: stop: 0x0000007B (0xF78D2524, 0c 0000034, 0 x 00000000, 0 x 00000000)

    I think I have a BIOS problem, but I don't know how I could continue dealing with the repair. I have no success update the bios from usb flash. Any idea is appreciated.
    Update: managed to start with F8, choose to boot in safe mode and loading hangs after "load: \windows\system32\drivers\crcdisk.sys"***.
    the machine is a gateway LX6810-01 (friend motherboard)

    Hello

    1. What is the exact error message when Windows Vista does not start?

    2. you have the disk Installation of Windows Vista operating system?

    I suggest you change the mode of RAMA to IDE in the BIOS. You can contact the PC manufacturer for assistance.

    Note: BIOS change / oxide of additional metal (CMOS) semiconductor parameters incorrectly can causeserious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

     

    In addition, perform a check disk in Windows Recovery Mode.

    (a) Insert the Windows Vista installation disc in the disc drive, and then start the computer.

    (b) press a key when the message "Press any key to boot from CD or DVD".

    (c) select a language, an hour and the currencyand a keyboard or an input method, and then click Next.

    (d) click on check drive for errors.

    (e) in the System Recovery Options dialog box, select the drive of your Windows installation and click Next

    (f) to the System Recovery Options dialog box, click on check Drive for errors.

    (g) use the switch/r to run the disk check.

    Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost

     

    It will be useful.

  • try to start the bonjour service, but get the error message: windows could not start the Bonjour service on local computer

    error message
    Windows could not start the Bonjour service on local computer
    Error 5 access is denied

    I have Vista Home.

    This prevents me to update I have tunes.

    Completely uninstall iTunes. Download the update manually from Apple or here. Restart the system and then install the software you have downloaded.

  • Windows could not start the service Windows search on the computer Local (Error 1053)

    Windows Search does not work on the start menu, nor IE8 remembers the URL history more.

    I tried the procedure described in this post (does not work): http://social.answers.microsoft.com/Forums/en-US/w7files/thread/8d68d244-afca-4006-a6eb-57d4dd9d58df

    I ran a scan sfc, who has not returned this any integrity issues have been detected.  I also tried to disable the Windows search feature to "Turn Windows features on or off", rebooted and tried reactivation, without success.

    I tried to create a new profile, but the same problem occurred.  I discovered that WSearch service does not work.  When I try to enable it, I get the following error:

    ---------------------------
    Services
    ---------------------------
    Windows could not start the Windows Search service on Local computer.

    Error 1053: The service did not demand launch or control in a timely

    I did some searching on the forum, but I was unable to find a solution to this problem.  Any help would be greatly appreciated.

    Yep, http://www41.zippyshare.com/v/30503880/file.html

    Unzip it, and then apply this Difficulty REG. Ramesh Srinivasan, Microsoft MVP [Windows Desktop Experience]

  • Windows could not start the IKE and Authip IPsec keying service modules on the local computer. Error 1075 the dependency service does not exist or has been marked for deletion.

    Hi, I'm trying start the IKE and AUTHOP service from the SERVICES screen but I get this error:

    Windows could not start the IKE and Authip IPsec keying service modules on the local computer.  Error 1075 the dependency service does not exist or has been marked for deletion.

    original title: ike and authip error 1075 the dependency service does not exist or has been marked for deletion

    Hello

    Remember to make changes to the computer before the show?

    You can follow the below methods:

    Method 1: Restart Windows and try to start the Security Center service.

    If you still receive the same error, make sure that the WMI service is launched and running:

    (a) click Start, run , and then type Services.msc

    (b) double-click Windows Management Instrumentation

    (c) set its startup type to Automatic

    (d) click Start to start the service, and then click OK

    (e) restart Windows.

    Method 2: Restart the service

    Windows logs an error if the service IKE and AuthIP IPsec Keying Modules or the driver does not start, or suddenly, they end.

    To restart the IKE and AuthIP IPsec Keying Modules service:

    To perform this procedure, you must have membership in the local Administrators group, or must you have been delegated the appropriate authority.

    (a) restart the service. You can do this from a command prompt or in the snap-snap-in Services Microsoft Management Console (MMC). Do one of the following:

    ·         Start an administrative command prompt. Click Start, click principally made programs, Accessories, right-click guest, and then click run as administrator. At the command prompt, run the command net start ikeext.

    ·         Click Start, type services.msc in the Search box and press ENTER. In the column name of the Services snap-in, right-click on IKE and AuthIP IPsec Keying Modulesand then click Start.

    (b) if the attempt to restart the service fails, restart the computer. This forces all related and dependent services to restart.

    (c) if the error persists after restarting the computer, then the executable files for the driver or service may be damaged, and the operating system must be reinstalled.

    Note:

    You can check that the IKE and AuthIP IPsec Keying Modules (IKEEXT) service runs by using the Component Services Microsoft Management Console (MMC) or the net start command line tool.

    You can check the link: http://technet.microsoft.com/en-us/library/cc733299 (WS.10) .aspx

    Method 3: Run a scan of the System File Checker.

    http://support.Microsoft.com/kb/929833

    It will be useful.

  • Windows could not start the service audio windows on the local computer. Error 1067: The process is completed in an unexpected way!

    Please help me! ....
    Audio service does not
    I tried Services.msc and tried starting windows Audio...
    The following error has come!
    Windows could not start the service audio windows on the local computer. Error 1067: The process is completed in an unexpected way!
    There is a sign of X in the audio icon...
    and when I click on this audio icon... TROUBLESHOOTER OPENS...
    all this happened all of a sudden!
    Please help me!
    Thank you.
    Nischal Sp

    Please provide the error screenshot more better assitance. Also, try this:

    Try to copy and merge the audio from another Windows 8 or better service.

    You can do this by going to the Registry Editor (make sure that the other computer is also a 32-bit system)

    Go to HKLM/system/current control set/services/audiosrv click audiosrv and then on the file menu, select export and save the file to a USB key or drive.

    While copy on your machine and merge. Then restart your system.

    Otherwise reset Windows 8:

    http://www.kapilarya.com/how-to-reset-Windows-8

    Good luck once again :)

Maybe you are looking for