Satellite L300-1BW - installing drivers for XP

Similar Questions

• Satellite M100-180: installing drivers for Vista has no display

  Hello. I am from Russia and my English can be a problem. so excuse me.

  I have a Satellite M100-180.
  I installed vista on my computer and downloaded the drivers for vista for my laptop.
  But I have problems with display on the Ati Mobility Radeon X 1400 graphics card drivers.
  After installation the message that this driver installation. Please answer as possible))

  Hello

  Satellite M100-180 belongs to the series of PSMA1E. Please download the Vista GPU driver for the right series M100!

  Also on the Toshiba European page driver you will find BIOS especially designed for Vista.
  So if you want to use Vista on your laptop, you will need to update the BIOS.
  But be careful! Do not forget that you have chosen the good BIOS and the right update procedure because the incorrect BIOS may damage the motherboards ROM module!

  Secondly, the installation instruction txt file has been on the site driver of Toshiba. This txt file shows you the right direction how to install the drivers of Toshiba.
  The proper installation order is necessary and important. So please follow the guidelines mentioned in this document.

  Last but not least; the ATI drivers are also available for download on the * www.omegadrivers.net * site.
  The driver downloaded from this great short site on my laptop.

  Best regards

• Satellite L300 - 17L: XP drivers for device controller and modem line

  Please, read before you close this thread as repetitive... (there is no answer to this particular question in the nets before)

  Hello.

  I recently bought Toshiba L300 - 17L without any operating system and (unfortunately) no unmanned. I installed the Windows XP (with Service Pack 3) and was able to find most of the necessary drivers (of http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp).

  Of course, I put the option fixes hard drive compatible windows installed and first mentioned in other threads... but there is always some problem with "modem on high definition audio device" and "line controller.

  I was told that the modem drivers are found in the audio driver pack (btw its works ok), but do not know which is my model as with scanners of system (such as the Everest) I can't find the name of the modem.

  The same with 'line controller', as I said here are the drivers for the motherboard... but once more - the system scanners failed to tell me the specific name of the motherboard (only general information is it Intel and chipsets names... but they are in many motherboards).

  Thanks for any help, especially from people who had the same problems.

  Hello

  I know, it's that your laptop supports its audio Realtek HD card.
  I downloaded and installed the driver from the page of Realtek Realtek sound card and the sound card is ok.

  I have to they that after installing XP on Vista laptops not all drivers are available for Win XP because some devices are only available using Vista.

  I put t know what controller line means and to be honest never heard of this controller, but I think as you translated it not right.

  Please check this doc from Toshiba:
  http://APS2.toshiba-tro.de/KB0/TSB83023N0000R01.htm

  You will see that some drivers for some devices doesn't exist for Win XP

• Satellite L300-1BW - Wireless fails atfer a few minutes

  Hi people, thanks in advance for all advice offered.

  I have a Toshiba laptop Satellite L300-1BW, when I turn on the wireless connection would stay for around 10-15 minutes and turns off, when I run the arrow on the internet logo it wont even pick up wireless.
  I have to restart the laptop wireless to start again, but lasts almost 5 minutes.
  My other laptop stays connected without problem if is not the hub.

  I already did it on the following link
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=165940.

  I have updated all drivers/BIOS... Wireless drivers. My drivers are Realtek...

  It made me confused bigtime.

  Please someone help!

  Hey,.

  What operating system you are using? It's the operating system preinstalled Toshiba or your own installation?

• Satellite L300-1BW - is very slow

  Hello world!
  Recently, I bought the TOSHIBA SATELLITE L300-1BW (PSLB8E)
  Link: http://uk.computers.toshiba-europe.com/innovation/jsp/supportMyProduct.do?service=UK&userAction=SMP_RESU LTS_PAGE & partNumber = PSLB8E-03F007EN & serialNumber = Y8805872q & USER_ACTION = 20number % series

  I need it for my study and using home. Computer runs VERY slowly. Now I have a version of Windows XP Pro SP3 64 bits. The programs that I have only Ms Office, Skype, Nero, antivirus - BitDefender. I play all the games. IM from the application for my study only - using Ms Word.

  My computer has been verified in the service center and no defects of any sore - not any software and hardware, virus damage, no all manufacture faults. The owners of these model please give me advice what to do. I stuck!

  What should I install Windows XP 32 bit or install Windows 2000 or upgrade hardware (memory... whatever)? I won't be disappointed by TOSHIBA!

  Evil appreciate any HELP!

  Hey Buddy,

  Can you be a little more detailed, please? What do you mean with very slow?
  How long it takes so that it starts Windows?
  How long it takes to start an application?

  I have to say that Windows XP 64-bit wasn t popular and there is no official support for Toshiba for this OS. If you use Windows XP, I recommend to install the 32-bit version.

  Did you test your laptop with the factory settings? It works properly with a preinstalled OS from Toshiba?

  I m also owner of the Satellite L300 and I use the preinstalled Windows XP 32 bit of Toshiba. I m very satisfied with this laptop, it s fast enough and need very little energy. :)

• Satellite L300-1BW - WLan disconnected about 10-15 minutes

  I own the:

  (Toshiba - Satellite L300-1BW)

  I thought I fixed this problem last night.
  Unfortunately, I was wrong. So far I've updated driver and BIOS on my laptop.

  My problem:

  OK so my internet works fine wirless thought when my laptop is not charging.
  However when the AC adapter is connect and the laptop is charging that the internet connects for about 10-15 minutes then log off, forcing me to reboot my laptop to get the internet working again.

  I'm on Vista Home Premium window and would appreciate any help what so ever.

  I looked through the forum and not yet fallen on a problem simular to mine.

  Thank you

  --

  Edit: Just checked the powersaving parameter and seen the the box "allow the computer to turn this device to save power" is checked, I uncheck the to solve my problem?

  > I thought I fixed this problem last night.
  I think you're talking about your first thread:
  http://forums.computers.Toshiba-Europe.com/forums/message.jspa?MessageID=165938

  > Edit: just checked the setting of energy-saving and saw the box "allow the computer to turn this device to save power" has been checked, I uncheck the to solve my problem?

  You certainly need to deselect this option because if she checked s then the cell phone would turn off / Unplug the WLan card to save battery.

• Satellite L300-1BW - wireless connection stops working after 10-15 minutes

  Hey!

  Just brought me a new laptop. Sound of the Toshiba Satellite L300-1BW. However, I've encountered a problem. I can connect to my home network wireless fine. However 10-15 minutes after browing internet, my just wireless connection will stop working.

  When does he say 'Local & Internet', 10-15 Minutes after that, I would say just "Local."

  I know full well it's not my Netgear because it work fine on all the other my computer.

  IM wondering if anyone could possibally help me. I would be grateful anyhelp.

  Thank you.

  Edit - seems work correctly with my laptop not charging. However when the power adapter is in charge of the laptop, it work for 10 minutes then stop.

  Hello!

  If you use Windows Vista, you must disable the WLAN energy saving function. You can find it in the Vista power management options. Check it!

  In addition, you should try to update the driver WLAN and the BIOS. The two you can find on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online downloads support & -online Download Driver

  Last but not least, I would recommend that you read hundreds of discussions on the problems of WIFI. You will find so much tips and tricks how to increase the WLAN functionality and troubleshooting.

  Good bye

• Satellite L300-1BW - 19 on CD/DVD drive error code

  Hello people, Satellite L300-1BW my wife lost her DVD player - manager of material properties gives the following error:

  "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19) »

  I tried to uninstall the DVD driver, then reboot to let her re - install, but it still comes back with the same defect :-(

  Any ideas anyone? ?:|

  Hello!

  Try to delete upper filters and lower, as in this Knowledge Base article Microsoft has offered:
  http://support.Microsoft.com/kb/314060

  (1) run Regedit (start > run > Regedit)
  2) navigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class {4D36E965-E325-11CE-BFC1-08002BE10318}
  (3) in the right pane, delete the "UpperFilters" key and delete the key "LowerFilters".
  (4) restart.

  Good bye

• Satellite L300-1BW - max memory per slot

  Hello

  I have a problem with my L300-1BW. Recently, I replaced my memory and upgrated to RAM 2x2gb.
  As I replace my Celeron T1600 1.6 Core 2 Duo T7500 2.2 my Toshi proc get so much that I consider myself as RAM upgrade even more.

  We might find that L300-1BW plug here:
  http://www.Toshiba.co.UK/discontinued-products/satellite-L300-1BW/

  And it says: "maximum extension: 4 096 MB.

  I was wondering if it means limiting 4-GB PER SLOT? OR TOTAL?

  I'm stuck, cause I typed "dmidecode t memory" on my OS of mint and stated as follows:

  Memory controller information «»
  Error detection method: no
  The capacity for error correction:
  None
  Supported Interleave: one-way Interleave
  Current Interleave: One-way Interleave
  Maximum memory module size: 4096 MB
  Maximum total memory size: 8192 MB

  Physical memory
  Geographical area: motherboard or motherboard
  Use: System memory
  Type of Error Correction: no
  Maximum capacity: 8 GB
  Handle information error: no error
  Number of aircraft: 2 "

  It's 8GB maximum. is true?
  Want to be 100% sure, as only 4GB DDR2 SO - DIMM module is quite expensive.

  Thanks in advance for any kind of support in this case.

  Hello

  This laptop supports the Mobile Intel GL40 Express Chipset
  According to the Intel ARK page this chipset supports max 4 GB of RAM
  http://Ark.Intel.com/products/35501

• Satellite - L300-1BW: how to check warranty registerd.

  Hello.

  Registerd just my warranty for my Toshiba Satellite - L300-1BW.

  I was wondering if there is anyway that you can go to see just how long/much guaranteed, have left you.

  Thank you.

  Hello

  Maybe I can help you.
  I found some forum discussions which includes this page from Toshiba:
  www.Toshiba-tro.de/unitdetails

  You will find many details about the registered model of laptop.

  Check it!

• Cannot connect by Satellite L300-1BW to wireless technology

  My Satellite L300-1BW has recently ceased to connect the my Wi - Fi.

  It shows that wireless networks are available, I can see my secure network and there is no red cross through the icon but when I click on IE, it only says: unable to connect.

  I tried with 2 of my friends houses on their connections without wire (previously connected) and it just does the same thing.
  I can see all the networks concerned, but it won't take me actually to my homepage.

  I do not understand why it has just stopped working - drives my lan are up-to-date. Help..!

  Hello

  You can see the WLan, which means that the WiFi is enabled correctly.
  But have you used the good encryption and encryption password in order to connect to the WLan router?

  Please check this!

  Please also check the firewall settings!

• Satellite L300-1BW - Vista cannot initialize properly

  Daughter has started nine laptop Satellite L300-1BW and can t use the laptop as their was a problem
  I need help to fix it.

  Windows Vista won t even not start. I put t know what is the problem.
  Diagnostics, he said that it s a root problem.

  Any help?

  Result of successful complete event log diagnosis
  error code = 0 x 0 time = 78 mins test internal State
  Code of erro chk full result sauce time = 0 x 0 = 31 mins
  Test test res com sauce eror code boot state = 0 x 0 time = 47 mins
  installation state chk com test result = 0x0 time = 452 mins
  found root cause failure current seup
  syastem details session disc = \device\ harddisk0 repertoire_windows = c:\windows autochk run = 0 root causes of num = 1 chk test updates comp error code from success = 0x0 time = 0 ms test disk diagnostic comp sucsees eror failure code = 0x0 time 94

  Root cause found - failure while playing.
  Also the Vista laptop, is a Toshiba Satellite L300-1BW 415,4 base all Toshiba more round, loading of innovation.

  Any help would be appreciated if anyone knows how to solve this problem and it didn t come with a Vista disk or recovery

  Thanks celticman

  Try the laptop from the recovery of HARD drive partition recovery.
  Do you know how to start this process? Isn't it?

  Immediately after the laptop has been turned on, press the F8 key.
  Then choose the first option called fix my computer
  Then choose recovery Toshiba (last option in a new window)
  Now the HARD drive should products.

  I think this should help you reinstall the Win Vista again and finally the installation of Vista successfully

  Good bye

• How to install drivers for epson Stylus 520

  I tried several times to install drivers for the all-in-one on my desk. I use windows 7 64-bit OS. Whenever I try, a message indicates that there is no driver. Part of the download is installed but not all. Any suggestions?

  You try to download the driver on the site of Support of Epson for the workforce 520?  If not, the following link is to this site: http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?BV_UseBVCookie=yes&oid=152503&prodoid=63087903&infoType=Downloads&detected=yes&platform=OSF_W_7-64

• How do I install drivers for printers supplΘmentaires

  I would like to know how to install drivers for printers supplΘmentaires 32 bit for my HP Deskjet F380 all-in-one connected to my windows 7 pro 64-bit desktop computer so that I can print from a laptop which is a 32-bit Ubuntu system. Any help would be greatly appreciated.

  Curt

  I got the answer to my own question. You don't have to install additional drivers for your windows 7 computer pro to be able to print to it from an Ubuntu machine. All you have to do is on the windows computer to which the printer is connected, is to go into devices and printers. Then right clock on the printer you want to print from the machine Ubuntu and left click on Preferences of printer in the pop-. Can find the ports the printer tab and left click, then search for bidirectional printing and clear the check box next to it and keep. Then, you should be able to print from e machine Ubuntu to the printer. At least I am able to. I hope it works for you.

  TD33

• How to install drivers for Mac under vmware?

  Hello the VMWare community! I would like to ask, if there is a way I can use my mac on Vmware drivers? My CPU is good in Vmware, but I would use my AMD Radeon rather than Vmware SVGA graphics. Is anyway to do this? I heard that you can use your Mac OS x disk to install the drivers in Vmware.

  You can not install the drivers for the host GPU in the guest operating system as the guest operating system does not directly see it.  So if the operating system does not see the device then install drivers for a device in the operating system can't see would be a waste of time and in some cases the drivers wouldn't install when even if it can detect the device!  So, we're stuck with the supplied VMware graphics adapter.  Now other things like the iSight camera that a different story and you can use the iSight Boot Camp driver in a Virtual Machine.