Satellite L300-1bw - Question on the removal of the HARD drive password

Similar Questions

• Satellite P200-1BA - questions about the HARD drive RAM upgrade

  There is a 2nd internal HARD drive Bay, but not a female connector. Can I install it? How?
  There are 2 slots for RAM, all together 2 GB. Is it possible to exit an and instead place a token 2 GB to 3 GB total or should I always double channel pair RAM?

  It is not possible to install the second HARD drive. The laptop box is universal for all models P200, but some of them are delivered with 2 drives hard HDD upgrade is not possible.

  With the RAM modules, you can do what you want. To be more precise, YES! You can remove a 1 GB module and put 2 GB RAM. Please just use high quality Rams and not some products without name at low cost.

• Satellite L300: How to remove the HARD drive password

  Hello world. I have a problem with my Satellite L300. I put a password on the HARD drive and now I want to remove it, but it doesn't let me,
  So any ideas on how to completely remove the prompt to "enter the password for HARD drive built-in user" would be very appreciated.

  Thank you very much
  Martin

  Hello

  Please check this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=56069

  The user wrote:
  + It's usually cycle which starts when you press or to start to change this option. +.
  + Once, I found that I was out. +

  Hope this is the info that you need to remove the HARD drive password...

• Satellite C660D - 1 3 - How to remove the HARD drive password?

  So, my laptop is unrecoverly dead ;(
  (Toshiba Satellite C660D - 1-3)
  but the HARD drive still works (Toshiba HDD2L04 320)
  the problem is, I protected with a password that I can not turn off.

  I have the password, I could also save all my important files to an old crappy HP laptop running.

  But now I'd like to use it as an external drive, I can't as long as it is protected (I tried a few PC, nothing worked).

  When I try to disable it in the BIOS of the old HP, it asks me on a second password, a password for the master user... but I've never had one in my Toshiba :/

  What now? What I have to go to a store and try an another Toshiba or is it a tool to disable the password of windows or linux?

  Hello

  Unknown HARD disk password can not be removed... even the authorized service provider Toshiba will not be able to remove this password disk HARD unknown.
  In this case, the HARD drive will be useless

  Take a look at this FAQ from Toshiba:
  Is it possible to delete a HARD drive password?

• Satellite U400 - how to remove the HARD drive password?

  Hello

  I have Toshiba Satellite U400-PSU40E. I put the HARD drive password to test this optoins in BIOS. It woks fine. After that, I remove the HDD password, but when BONES start to start the fist show me black sreen with password and when push enter Os start at startup.

  How to remove this black screen (password disk HARD is clear) before you set a password it is not this black screen?

  Hi iliyan_84,

  You only set the HARD drive password or another password too?
  Normally the HARD drive password can be removed in the BIOS. Therefore, to set a new password and don't enter all the keys. Just press the Enter key to leave the new password disk HARD vacuum box.

  Try to also load default settings in the BIOS and if it doesn't work, you must update the BIOS. You can find the latest version on the official website of Toshiba.

• Tecra M5 - how to remove the HARD drive password generation?

  +++ Problem +++

  No change possible 'Building in HDD Password'.
  The generation in HARD drive password' is known - but cannot remove the 'build in HARD drive password'.

  +++ Progress +++

  (1) parameters of the BIOS "Password."

  Is not registered

  (2) the "HARD drive password" BIOS settings

  HARD = built-in HARD disk drive
  Password disk HARD = only user mode
  Registered = user password

  +++ Procedure +++

  Change the setting "User Password = recommended" with BACKSPACE
  of 'user password = Registered' to 'user = password [empty]. "

  It follows the question: ' are you sure? [Y/N] »
  With this screen, the "User password" settings are changed back on "registered."
  No message appears as "Disabled" or empty cell.

  After the confirmation on my side, the laptop starts without asking 'building in HDD Password.
  After restarting the laptop (2nd) ask the requested 'building in drive HARD password '.

  +++ Request: +++

  How is it possible to remove the 'building in HDD Password'?

  Background is to create an image file from the hard drive without the laptop original.
  So all the security settings should be disabled on the hard drive.

  Your support is welcome

  Kind regards
  ML

  Post edited by: Mluepke

  Hello

  I know, HARD drive password can not be deleted. Please see the follow-up documents:
  http://APS2.toshiba-tro.de/KB0/TSB6B01MC000CR01.htm
  http://APS2.toshiba-tro.de/KB0/FAQ9401AR0000R01.htm

  Good bye

• Tecra A6 - how to remove the HARD drive password

  I am repairing a laptop Tecra A6 for one of my clients.
  For the first time, I fixed it for him, the hard drive was blocked from password and I had to reformat using an online service.

  This time, when I took my customer's computer everything he had put on his computer was the fingerscroll / password to connect to the account, there was no protection of password on hard disc tray.
  I brought it back to the shop, she booted up and immediately, I wonder a password to unlock the drive.
  Somehow, the hard drive has developed a password.

  (1) is there a possible problem with the hard drive?
  (2) at - it a solution without having to wipe the hard drive
  (3) Toshiba has tools or the default password that would unlock it

  The hard drive is a Toshiba MK6034GSX 80 GB.

  Any help please?

  Hello

  The HARD drive password can be removed ONLY if the old password would be known to you.
  If the HARD drive password is not known to you then you will not be able to delete
  In this case, the HARD drive is blocked and is no longer usable.

  Here's a little description:
  http://APS2.toshiba-tro.de/KB0/FAQ9202JG0000R01.htm

  Welcome them

• How to remove the HARD drive password?

  Password, turn on your drive. I know, but cannot remove the password.
  How can I remove HDD password?

  I'm here with the solution...

  1. the HARD drive password can be removed by using security help.

  2 using the BIOS CONFIGURATION go to the HARD drive password section which should appear as follows:
  HARD drive password
  HARD = built-in HARD disk drive
  HARD drive password mode = USER only
  Registered = user password

  3 tab in the "User password" field and just enter the old password and then a new twice (once to check) as you normally would. If you don't want a password, simply press "enter" twice

  * Or try this: *.

  Enter the BIOS
  arrow to the "Registered" field HARD drive password
  Press
  Enter the existing password and then
  Enter the new password (or leave it empty if you n t want one no matter what password), then
  Meet confirm retype the new password (or leave blank (see above) then)

  That's all...

• Satellite 2410-703 requires the HARD drive password

  My computer crashed recently, giving initially the message 'Please insert the product CD-ROM recovery' followed shortly after by "HARD drive password:
  I do not have a HARD drive password, but the product recovery CD and data on my hard drive that I want to recovery again.

  Can anyone offer a solution to my problem? Thank you.

  I put t know why your laptop has crashed and why the HARD drive password is needed but the fact is that if you n t know the password for HARD drive then the HARD drive is blocked and is no longer accessible.
  In this case you will need a new...

• Tecra M5: How to use the HARD drive password when the HARD drive is connected as an external device?

  I have a Toshiba Tecra M5 with MK1032GSX hard disk. I put a bios password and HARD drive password. Every day I turn on my laptop with my password a number only once: unlock the disk and bios. The password screen is before windows starts.

  One day my laptop motherboard is broken, I bring my pc on the Toshiba support center (less disc) and I'm waiting for him (2 months ago). I need to read my date of the disc, but it is locked by password. The drive is a SATA drive, I put it on a desktop computer and I see it in the bios and in windows resource device, but I do not see in the Explorer.

  None of the software I've tried (HDD unlock, atapwd...) will not work. I have my password, I have not forgotten.

  How to read my date? Can you help me?
  Thank you.

  Hi Oscar

  Hmmm I m not 100% sure, but I think that it s not possible to remove the HARD drive HARD drive password if you haven t your laptop.
  I know that if the HARD drive password has been set the HARD drive is not more accessible and more usable.

• How to use recovery discs to get rid of the hard drive password?

  I got this calculation and it asks me to put in the built in HARD drive password, I don't have so I bought the recovery disks. I did what he said but did nothing? Help me please!

  Hello

  The recovery disk will not remove the HARD drive password. Recovery disk will just reinstall Windows with all the drivers and tools (factory settings), but not remove any HARD or BIOS password disk. Of course the Windows password is deleted installation recovery but that s all.

  You should check this article:
  [What is a HARD drive password? | http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=50]

• Out of the blow of sleep when the HARD drive password used on Portege R700

  Hello
  I just got a DLI R700 with Win 7 Pro 64-bit
  I have a very annoying problem because it must be plus 1 minute to accept the password after the resumption of the mode standby. It would be faster out of the hibernation!
  So he wakes up from his sleep in a second, then you can enter the password without any problem but you just can't click on the arrow or press on enter up to what more than one minute. Similarly, it will accept even fingerprints directly at the exit (you get the green check mark) after wake but then expects just over one minute to move in the opening session on the desktop screen.

  Through a process of account, I worked on what was going on...
  Only, it crashes when you have the password on resume from sleep. CV password sleep turn out and he throws back in Office windows in seconds of wake
  This does not happen to resume from hibernation or reboot - scan of fingerprints or password is entered, then goes right into the office in a few seconds
  I started uninstalling software fingerpint, vap, power, toshiba - nothing always security management the same. Then I realized the password HARD drive - which was defined using the security of Toshiba and deleted using the same, has been still enabled in the bios. I have this off and everything works fine. I reinstalled the vap, power management and fingerprint software and everything is always very well, so it was defnitely the HARD drive password.
  Now it's really fake I want to have a RESUME from sleep password and HDD password protection - I have to choose between one or the other, unless I want to wait more than a minute each time he wakes from sleep which is a real pain! So it's clearly a bug in HARD drive password settings, probably in the bios? I have the latest BIOS installed.
  Any ideas on how to get this sort?

  Does anyone else have this problem with be either 32-bit or 64-bit. Or everyone doesn't have this problem, that is to say that they hear HARD drive password AND he wakes with password ok in a few seconds?
  Thank you

  Post edited by: bullerd

  Hey Buddy,

  It's really hard to say something about what I can only say that I can t noticed this problem on my Windows installation.

  By the way: you are using the version Windows from Toshiba or your own installation of Windows?

  Theoretically, it could be a problem to install Windows or disc itself are you able to test another installation of HARD drive or windows that you can make sure it is not a software problem?

• Satellite Pro A120-154 - how to remove the HARD drive password?

  Hello

  I have the following problem: I set a password for the HARD drive in my old Satellite Pro A120-154 years ago, and now I want to remove or change the passowrd since I'll give you this laptop for my nephew. Instead I don't know the password, I am not able to change or remove, not with the password of Toshiba uitility program and not with the BIOS set up.

  Further I can't find any info on this in the user manual. How can I do this?

  Thanks Tino

  Hello

  I found several useful documents from Toshiba on HARD drive password. Please take some time and pick up some info on HARD drive password and how it works.

  http://APS2.toshiba-tro.de/KB0/FAQ9202JG0000R01.htm
  http://APS2.toshiba-tro.de/KB0/TSB6B01MC000CR01.htm
  http://APS2.toshiba-tro.de/KB0/FAQ9401AR0000R01.htm

• Satellite A100-451 - a few questions on the HARD drive, speakers

  I hope someone can help with these that I could not help on the information line.

  How fast is the hard drive on this laptop? He said SMART 160 GB, but does not specify a speed, although I'm guessing its 5400 RPM.

  Are the Harmon Kardon speakers? The specs say Toshiba stereo, and even on the Comet, he said Harmon Kardon. Here is a good bass-wise?
  Looks like there is no bluetooth, I find a little surprise.

  Finally, the only place wherever I can find it for sale is the comet... I was wondering it anyone has also saw that I had some dodgy experiences with them.

  See you soon
  Matt

  Hello

  I found some info that the rotation of the HARD drive is 4200 RPM. I'm not sure 100% on speakers but usually if laptop a harman/kardon speakers it is not in the specification but for A100-451, it is not the case. This info, you can get the garage directly.

  BT is not available, and it shouldn't surprise you because most of the A100 models are supplied without BT module. You can use any time key USB BT. IT is simple to use and really cheap.

• Satellite M70 - down keyboard when the HARD drive gets hot

  My Satellite M70-181 begins typing "t" series when you reach the working temperature. In my case, if the HARD disk exceeds a temperature of 48-50 ° C (speedfan).
  I replaced the original Travelstar with a new HDD Samsung, but it becomes so hot that precedes it and the blackout keyboard still appears.
  Because the processor is idle most of the time, the fan is too slow. But the fan doesn't seem to affect the temperature of the HARD drive in any case.
  Any ideas anyone? (Sorry for this kind of English...)

  Frank

  Hello

  Have you noticed this problem with keyboard only when the temperature is raised to a higher level?

  To be honest, I have never experience this problem and I can't believe that a higher temperature of HARD drive could affect the functionality of keyboard

  However, maybe you should clean the grids and the cooling fans. The notebooks are clogged with dust and don t cooling modules work properly.
  Use a jet of compressed air which should help to remove dust, I think this should help to reduce the internal temperature.