Satellite L300-1BW - Vista cannot initialize properly

Similar Questions

• Cannot connect by Satellite L300-1BW to wireless technology

  My Satellite L300-1BW has recently ceased to connect the my Wi - Fi.

  It shows that wireless networks are available, I can see my secure network and there is no red cross through the icon but when I click on IE, it only says: unable to connect.

  I tried with 2 of my friends houses on their connections without wire (previously connected) and it just does the same thing.
  I can see all the networks concerned, but it won't take me actually to my homepage.

  I do not understand why it has just stopped working - drives my lan are up-to-date. Help..!

  Hello

  You can see the WLan, which means that the WiFi is enabled correctly.
  But have you used the good encryption and encryption password in order to connect to the WLan router?

  Please check this!

  Please also check the firewall settings!

• Satellite L300-1BW - WLan disconnected about 10-15 minutes

  I own the:

  (Toshiba - Satellite L300-1BW)

  I thought I fixed this problem last night.
  Unfortunately, I was wrong. So far I've updated driver and BIOS on my laptop.

  My problem:

  OK so my internet works fine wirless thought when my laptop is not charging.
  However when the AC adapter is connect and the laptop is charging that the internet connects for about 10-15 minutes then log off, forcing me to reboot my laptop to get the internet working again.

  I'm on Vista Home Premium window and would appreciate any help what so ever.

  I looked through the forum and not yet fallen on a problem simular to mine.

  Thank you

  --

  Edit: Just checked the powersaving parameter and seen the the box "allow the computer to turn this device to save power" is checked, I uncheck the to solve my problem?

  > I thought I fixed this problem last night.
  I think you're talking about your first thread:
  http://forums.computers.Toshiba-Europe.com/forums/message.jspa?MessageID=165938

  > Edit: just checked the setting of energy-saving and saw the box "allow the computer to turn this device to save power" has been checked, I uncheck the to solve my problem?

  You certainly need to deselect this option because if she checked s then the cell phone would turn off / Unplug the WLan card to save battery.

• Satellite L300-1BW - wireless connection stops working after 10-15 minutes

  Hey!

  Just brought me a new laptop. Sound of the Toshiba Satellite L300-1BW. However, I've encountered a problem. I can connect to my home network wireless fine. However 10-15 minutes after browing internet, my just wireless connection will stop working.

  When does he say 'Local & Internet', 10-15 Minutes after that, I would say just "Local."

  I know full well it's not my Netgear because it work fine on all the other my computer.

  IM wondering if anyone could possibally help me. I would be grateful anyhelp.

  Thank you.

  Edit - seems work correctly with my laptop not charging. However when the power adapter is in charge of the laptop, it work for 10 minutes then stop.

  Hello!

  If you use Windows Vista, you must disable the WLAN energy saving function. You can find it in the Vista power management options. Check it!

  In addition, you should try to update the driver WLAN and the BIOS. The two you can find on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online downloads support & -online Download Driver

  Last but not least, I would recommend that you read hundreds of discussions on the problems of WIFI. You will find so much tips and tricks how to increase the WLAN functionality and troubleshooting.

  Good bye

• Satellite L300-1BW - 19 on CD/DVD drive error code

  Hello people, Satellite L300-1BW my wife lost her DVD player - manager of material properties gives the following error:

  "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19) »

  I tried to uninstall the DVD driver, then reboot to let her re - install, but it still comes back with the same defect :-(

  Any ideas anyone? ?:|

  Hello!

  Try to delete upper filters and lower, as in this Knowledge Base article Microsoft has offered:
  http://support.Microsoft.com/kb/314060

  (1) run Regedit (start > run > Regedit)
  2) navigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class {4D36E965-E325-11CE-BFC1-08002BE10318}
  (3) in the right pane, delete the "UpperFilters" key and delete the key "LowerFilters".
  (4) restart.

  Good bye

• Satellite L300-29V - failed to initialize for the logon process

  Hello

  Trying to upgrade my Satellite L300 - 29V Vista Home Premium to the Toshiba provided Win 7 Home premium with the help of the upgrade DVD Toshiba. I tried this many times now with no success. On each attempt, I get the message "* logon process initialization failed - the Interactive logon process initialization has failed. For more details, please see the event log. "*.

  At this point, the mouse is active, but none of the keyboard keys control apart from the pointer appears only on the area of the event, enter and esc. Pressure on one of them or by clicking on the OK button or Cancel will be empty of the screen. A minute later, the blue screen of death will be appear and disappear quickly, after that, I have the option load Win 7 or return to Win Vista. Do go back to Vista (which I did several times that I care to remember) is not a problem and the laptop runs without problem later. At any time I am able to view the event log.

  I followed the instructions given by the upgrade DVD, IE. removing the drivers and continued on the upgrade to Windows 7. I've updated the mobile site to download drivers/software Toshiba in order to have the machine as much upto date possible - everything to nothing is outside having more drivers to remove using the upgrade DVD.

  The only thing I did is to back up my data and recover Vista to factory settings and load on top of Vista in this way.

  But before that I'm looking for the Forum of Toshiba for any useful advice - someone else has had this problem or does anyone know a way around this - if so I would appreciate your help.

  See you soon

  Dleifynot

  It is really strange. I've updated Qosmio x 300 and Satellite A500 by using Toshiba upgrade kit.
  No problem at all.

  Did you follow instruction as described on http://aps2.toshiba-tro.de/kb0/TSB9902P60000R01.htm?

• Satellite L300-1BW - is very slow

  Hello world!
  Recently, I bought the TOSHIBA SATELLITE L300-1BW (PSLB8E)
  Link: http://uk.computers.toshiba-europe.com/innovation/jsp/supportMyProduct.do?service=UK&userAction=SMP_RESU LTS_PAGE & partNumber = PSLB8E-03F007EN & serialNumber = Y8805872q & USER_ACTION = 20number % series

  I need it for my study and using home. Computer runs VERY slowly. Now I have a version of Windows XP Pro SP3 64 bits. The programs that I have only Ms Office, Skype, Nero, antivirus - BitDefender. I play all the games. IM from the application for my study only - using Ms Word.

  My computer has been verified in the service center and no defects of any sore - not any software and hardware, virus damage, no all manufacture faults. The owners of these model please give me advice what to do. I stuck!

  What should I install Windows XP 32 bit or install Windows 2000 or upgrade hardware (memory... whatever)? I won't be disappointed by TOSHIBA!

  Evil appreciate any HELP!

  Hey Buddy,

  Can you be a little more detailed, please? What do you mean with very slow?
  How long it takes so that it starts Windows?
  How long it takes to start an application?

  I have to say that Windows XP 64-bit wasn t popular and there is no official support for Toshiba for this OS. If you use Windows XP, I recommend to install the 32-bit version.

  Did you test your laptop with the factory settings? It works properly with a preinstalled OS from Toshiba?

  I m also owner of the Satellite L300 and I use the preinstalled Windows XP 32 bit of Toshiba. I m very satisfied with this laptop, it s fast enough and need very little energy. :)

• Satellite L300 & Windows Vista aren't grateful Ipod

  Hi, I hope you can help! I was directed here by Microsoft & Apple - here is my question and also Microsofts response:

  I have an ipod nano 3rd generation, work outside the home a near new laptop with windows vista. iTunes is the entire installation, no problems with the ipod at all but when I plug the ipod in, it only charges the ipod.

  computer doesn't recognize any, the ipod under windows or itunes. It there is no portable device driver in Device Manager, or anywhere at all.

  It is not the usb port as another usb have been recognized. I have tried in all the other usb ports as well. bottom line is that windows vista (and itunes) is not to recognize the ipod at all.

  I've been in contact with apple, with anything. I googled solutions for hundreds of other posts with exactly the same problem but no useful solution. Windows vista has no port of portable device - how can we get this on their pc?

  I've been at this for 4 days now and you have uninstalled/reinstalled much too often and I'm out! all tips (other that "have you tried another usb port' or ' have you reset the ipod" or something similar) would be much appreciated.

  once more, there is no drive of laptop/ipod device located on this computer. Please, I really hope someone can help =)

  * Microsofts response: *.

  Hello

  Step 1: enable USB bus power back

  If the laptop is configured to save power by turning off the power on the USB (Universal Serial Bus) port, it may not recognize a connected iPod.

  To activate the rear USB bus power, you can follow the steps mentioned in the link from Apple below
  http://support.Apple.com/kb/TS1401

  You said Windows vista has no port of portable device normally, all portable devices are connected via a USB port and they appear under Bus USB controllers in Device Manager.

  Step 2: reinstall the USB controllers.

  First of all, please disconnect all USB devices and then perform the following steps:

  1. click on 'Start', type device manager in the search bar and press "Enter." If necessary, click on continue.

  2. in Device Manager, double-click to expand the "USB Bus controllers", right-click on the "host controller", click "Uninstall" and click "OK".

  3. Repeat step 2 to uninstall all items under 'USB Bus controllers'.

  Then, restart your computer and windows will automatically reinstall all USB controllers.

  If the problem persists,

  * Step 3:Download and install the latest drivers from the computer chipset laptop manufacturer s online.*

  * So here I am with the issue still not resolved. * How can I download and install the latest chipset drivers for the Toshiba Satellite L300 & Microsoft Vista to recognize my ipod? *

  Thanks in advance!

  > 3:Download step and install the latest drivers for chipset on the website s laptop manufacturer.
  > * so here the issue still not resolved. How can I download and install the latest chipset drivers > for the Toshiba Satellite L300 & Microsoft Vista to recognize my ipod?

  Install a material like Everest home Edition or similar diagnostic tool.
  This tool would enable details of the hardware on your laptop.
  It lists all the devices and chipset name too.
  I think that it s Intel chipset, so you can find the driver on the Intel page

  Welcome them

• Satellite L300-1BW - Wireless fails atfer a few minutes

  Hi people, thanks in advance for all advice offered.

  I have a Toshiba laptop Satellite L300-1BW, when I turn on the wireless connection would stay for around 10-15 minutes and turns off, when I run the arrow on the internet logo it wont even pick up wireless.
  I have to restart the laptop wireless to start again, but lasts almost 5 minutes.
  My other laptop stays connected without problem if is not the hub.

  I already did it on the following link
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=165940.

  I have updated all drivers/BIOS... Wireless drivers. My drivers are Realtek...

  It made me confused bigtime.

  Please someone help!

  Hey,.

  What operating system you are using? It's the operating system preinstalled Toshiba or your own installation?

• Satellite L300-1BW - max memory per slot

  Hello

  I have a problem with my L300-1BW. Recently, I replaced my memory and upgrated to RAM 2x2gb.
  As I replace my Celeron T1600 1.6 Core 2 Duo T7500 2.2 my Toshi proc get so much that I consider myself as RAM upgrade even more.

  We might find that L300-1BW plug here:
  http://www.Toshiba.co.UK/discontinued-products/satellite-L300-1BW/

  And it says: "maximum extension: 4 096 MB.

  I was wondering if it means limiting 4-GB PER SLOT? OR TOTAL?

  I'm stuck, cause I typed "dmidecode t memory" on my OS of mint and stated as follows:

  Memory controller information «»
  Error detection method: no
  The capacity for error correction:
  None
  Supported Interleave: one-way Interleave
  Current Interleave: One-way Interleave
  Maximum memory module size: 4096 MB
  Maximum total memory size: 8192 MB

  Physical memory
  Geographical area: motherboard or motherboard
  Use: System memory
  Type of Error Correction: no
  Maximum capacity: 8 GB
  Handle information error: no error
  Number of aircraft: 2 "

  It's 8GB maximum. is true?
  Want to be 100% sure, as only 4GB DDR2 SO - DIMM module is quite expensive.

  Thanks in advance for any kind of support in this case.

  Hello

  This laptop supports the Mobile Intel GL40 Express Chipset
  According to the Intel ARK page this chipset supports max 4 GB of RAM
  http://Ark.Intel.com/products/35501

• Satellite - L300-1BW: how to check warranty registerd.

  Hello.

  Registerd just my warranty for my Toshiba Satellite - L300-1BW.

  I was wondering if there is anyway that you can go to see just how long/much guaranteed, have left you.

  Thank you.

  Hello

  Maybe I can help you.
  I found some forum discussions which includes this page from Toshiba:
  www.Toshiba-tro.de/unitdetails

  You will find many details about the registered model of laptop.

  Check it!

• Satellite L300-29U - Vista crashes, even in safe mode

  Hi, I really hope there is someone out there who can help me, my laptop does not work (properly) more, and I don't know what is the cause.

  * The short version: *.

  Two days ago my computer froze all of a sudden for no apparent reason. It did not (without Ctrl-Alt-Del, etc), I could only move the pointer. Since then, has happened repeatedly, even in safe mode. A potential clue: runs chkdsk c: \r \f results in a blue screen.

  * Details: *.

  I have a Satellite L300-29U (about 3.5 years) with Windows Vista.
  Two days ago the computer is not responding, after running normally for a few hours. I had not installed a new hardware or software. Even the clock had stopped. Only the pointer could be moved, but clicking on had no effect, or no has Ctrl-Alt-Delete. I stopped him via the power button. It restarted normally, I opened it then Firefox, but shortly after the same problem has emerged.
  I selected the Mode without fail to start and then let my antivirus (Avira) program a complete check of the system. The computer froze again after about an hour and 30% in the analysis. (Curiously, the timer showing how much time had passed since the beginning of the analysis was still running, but had stopped the clock of the computer.)
  Later, I tried another full analysis and again once it froze. Before that, I ran a few quick scan negative that came.

  In general, I find that Windows starts fine, but in normal mode it freezes pretty quickly when I try to do something. In safe mode, it freezes more quickly, but it's still sometimes.

  I also tried the "repair your computer" option at startup.
  -System Restore does not help
  -Memory Diagnostic is not a problem

  Searching online, I found suggestions for select command prompt and try to chkdsk. My conclusions:
  -chkdsk c: /f gives no indication of errors. The only thing that might be unusual is the following message at the end (translated from Dutch): "cannot transfer the log to the event log messages. Status 50. »
  -chkdsk c: /r /f results in a blue screen, each time to the same point in the process, namely, the 4th stage (verification of the data of the file), after having transformed the 133 634 files. The blue screen that appears shows the following:

  -----
  QUOTE
  A problem has been detected and Windows has shut down to prevent damage to your computer.
  (...)
  Technical information: * STOP: 0 x 00008086 (0x00000000, 0x00000000, 0x00000000, 0x00000000)
  WORDS
  -----

  * Things I have NOT tried (again): *.

  -Execution of TOSHIBA hard drive recovery
  -Formatting the hard drive

  Why not try these again is that I still have a glimmer of hope that he might be up to a corrupt file, and I don't want to use a gun if it turns out to be a mosquito.

  I tried to look online for questions asked by people with problems and similar symptoms, but I find not only the case with some similarities, not exactly the same thing.

  Any suggestions? Any help would be greatly appreciated. Thank you for your time.

  > Two days my computer froze all of a sudden for no apparent reason
  Above all it s sign parts hardware problem as a module of memory or the motherboard can cause this.

  > Since it happened repeatedly, even in safe mode. A potential clue: runs chkdsk c: \r \f results in a blue screen.

  The command chkdsk access and HARD drive tests so it could also be that the HARD drive is the troublemaker.

  From my point of view, you should start the recovery and should set the device to the factory settings.
  If the device would not work even after you have used the factory condition, I guess that one of the mentioned parts malfunctions.

• Satellite L300 PSLBGE Vista 64bits - WLan disconnects at random times

  Hey,.

  I recently bought a Toshiba Satellite L300 (PSLBGE series) computer laptop. It has 4 GB of RAM, so I installed Windows Vista Ultimate 64 on that.

  Problem is that on the Toshiba site there are only drivers Vista32 and with those that I found online, the wireless adapter works, but it keeps disconnecting at random times. It works fine until it stops randomly, there is no message "Network cable" unplugged

  He let go the IP address but I tried to keep a 'ping t' on and it gives "the request exceeded" for a period of time and then it comes back.

  What should I do?
  Thank you

  Hello

  First of all, it would be interesting to know what you have exactly the WLan card.

  I know you could use some WLan drivers from this Toshiba WLan page:
  http://APS2.toshiba-tro.de/WLAN/

  In addition, I recommend turning off some options that affect the WLan in energy saving feature.

  First turn off in energy-saving WLan card properties. (device-> card Manager WLan-> properties-> energy saving)
  Then check the power options of Vista-> wireless adapter settings > power save Mode

  Here this Toshiba doc could be useful for finding these settings:
  http://APS2.toshiba-tro.de/KB0/HTD84026Q0000R01.htm

  Finally and above all the Advanced tab in-WLan card-> properties > Device Manager contains some useful WLan settings that might increase WLan performance

  Welcome them

• Satellite L300 (PSLB8A-0VK004) - cannot find the webcam driver

  Hi everyone, I recently had to do a clean install of Vista Ultimate (32 bit) on my Toshiba Satellite L300 PSLB8A0VK004

  Unfortunately I could find the drivers for the integrated Webcam. I installed several different versions of the Camera Assistant Software without success with everything that ends with the window, that drivers have failed. Please restart your PC or something similar. After several boots the same problem appears. Device Manager only tells me that all drivers are missing - however I don't seem to see anything on a webcam?

  Everyone knows the same thing? I don't think that Webcam drivers would change within each variant L300?

  Any help would be greatly appreciated! Thank you

  Hello

  Your model is a Australian and can be found on the Australian Toshiba page:
  www.MyToshiba.com.au > Support > downloads

  Then enter your model number (PSLB8A-0VK004) and all the drivers will be listed for this model. There is only one pilot of the webcam that you can download for Vista 32 bit: Chicony Camera Software and this is the correct driver.

  Check this box!

• Satellite L300-1BW - BSOD and then the password at startup appeared

  Hello

  I'm new hear that ive just got a laptop Toshiba L300 - 1bw Windows vista, intel celeron.

  I changed the laptop on it gives the initial toshiba screen then goes to a blue screen and request a password.

  I tried f8 when turning on pc ive tried f12 and f2 but not anywhere (say at startup screen press f2 or f12) getting to the bottom of the joy.

  I called Toshiba with no joy.
  It was bought for me for Christmas but my boss lost reception and Toshiba said I could send to China, but it cost me money or buy the recovery disk.

  Of course, I don't want to pay these charges unless I need to.
  So does anyone know a way round to re install or move to the password option.

  Any help would be great
  Thanks in advance

  Nick

  Hello Nick

  Please do not be angry on me, but the whole story is completely strange. I don't understand what you mean.
  Best thing you can do is to contact the nearest authorized maintainer and ask for help. They can remove the BIOS password for you. Of course, you must pay for it.
  If the laptop is bought legally it has no problem at all.

  Sorry but there is nothing that you can do it alone.