Satellite L300-1DN: battery not

Hello

I bought a Toshiba Satellite L300-1DN less than a week ago and its worked amazingly.
This morning I was using, low battery so I plugged it in to charge, which naturally when fine and charge upward.

Went out in the afternoon, came home and began to use it again.
When the low battery, I plugged it and about 10 minutes later made it always became very very low and did not display to be connected!
I thought that the wire had released the card as it does, but he didn't.

Ive now tried in 3 different taken with the laptop on and outside, but it does not load!

Is it a problem laptop or Charger problem?

Thank you :D

Hello

Can you start the laptop with AC adapter only?
If so, it seems to be a problem of your laptop (maybe the motherboard) because the AC adapter is working correctly (you can start the laptop with AC adapter only).

If you need to contact the nearest authorized service provider. They can check the phone and swap the motherboard if it of necessary.

Good bye

Tags: Toshiba

Similar Questions

  • My Satellite L300-1dn does not connect to my router

    A couple of months, I changed internet service providers and my laptop connects to the new router, even if he says that it is connected.
    I have to keep the ethernet connection is plugged in, and as soon as I take, I lose the connection.

    I did everything which was recommended to me and it still does not work.
    I know the router works as my other laptop captures the wireless connection, and I can get the WiFi when I visit the family.
    My new ISP has come to the conclusion that my laptop was blocking the new router.

    Please can someone help?
    Thank you

    Hello

    Simply said; LAN works but WLan don't.
    Right?

    In your case, I recommend you update the WLan driver.
    I m not sure quote what wlan card you have. It s either the ATHEROS 11 b/G XB63L or REALTEK RTL8187B 802.11(B/G)
    However, the driver can be found here:
    http://APS2.toshiba-tro.de/WLAN/

    In addition, you must make sure that the BIOS is updated.

    Now, you should check the WLan card settings. In the Device Manager-> card WLan-> properties-> Advanced tab, you will find options for WLan.
    Make sure the router and wireless network card use the same channel and same wireless standard 802.11 B or G

    I also recommend to check the encryption of Wlan and WiFi encryption password.
    Both must match with the Wlan router.

    Last but not least check the firewall settings

  • Satellite L300-1DN: brocken USB ports - PCMCIA USB card does not fit

    My granddaughter broke the USB ports leaving the dongle and it banging as she wore the portable peasantry.
    We advised me to buy a Belkin USB 2.0 notebook card and slide it into the slot on the side of the laptop but it does not seem appropriate.
    I am a novice in computers and would welcome that any help however basic.

    Eric

    Hello

    Satellite L300-1DN was equipped with the EXPRESS CARD slot.
    You can use the ExpressCard/54 card.

    Have a look here on the Wikipedia page:
    http://en.Wikipedia.org/wiki/ExpressCard

    Welcome them

  • How to enable virtualization on Satellite L300-1DN?

    Hello
    I would like to know how to enable virtualization on Satellite L300 1DN please?
    Thanks in advance

    Hello

    General virtualization is not available on all computers laptops because it s based on the material and it must be supported on the CPU.
    On many models with processor supports virtualization, this option is added in the BIOS. Sorry, but if this option is not available in the BIOS settings nothing you can do about it.

  • Satellite L300-1DN is scalable?

    I recently bought a Satellite L300-1DN which has Vista Home Premium.

    After the purchase, I was told that it would be not possible to change the o/s (down or upgrade). However, I would like to upgrade to Windows 7 once it is launched. I'm not sure moving to XP on it, it is a good idea.

    My preference is for own facilities, so drivers will receive for Win7? If this is not possible it would be possible to upgrade to Win7. My problem is that Vista is extremely heavy on system resources and the boot time is terrible (to compare to the Puppy Linux< 30="">

    Thanks for this info!

  • Re: Satellite L300-1DN - unable to connect to the internet

    Hello guys! I recently bought a Toshiba laptop - Satellite L300-1DN and I can't connect to the internet wirelessly or by cable.

    I tried to turn on the wireless button and my laptop recognized my network without wire from my house, but he just not able to connect. Then I tried to connect the cable, but my laptop itself connected to an 'unidentified network' and the internet still does not not :(

    The internet works perfectly fine for my old laptop and my other roommates. So I guess that is not a problem with my router itself.

    I don't know computers very well, so I'd really appreciate your professional opinion!

    Thank you very much!
    Scarfy

    > One last thing, I tried to connect to an unsecured wireless network and it worked!

    It looks like a problem with your router. Check this box and look on the site of the factory for an updated firmware.

    Make sure the laptop and the router using the same standard WiFi (for example 802.11 g).
    Disable all the functions of economy of the WLAN card in Device Manager.

    Last but not least follow Luke posted.

  • Re: Satellite L300-1DN - how to use recognition of face for login

    Hello

    I recently bought a new Toshiba Satellite L300-1DN and I want to use face recognition to connect.
    I registered my face with the usual set up, until the movement of the head and side by side in a fixed sofa downstaires.
    Now here or in any position other than this couch I can't connect without a fault which is very annoying!

    Because I thought that I would probably be more connect from my office in any case, I have re-made the installer, which worked.
    Over and over in the exact position even newspaper failure!

    Now, whenever I try to re setup my face etc, I am going through the whole process and it fails.
    I've done about 5 times now and make me very frustrated!

    I just want to know if theres any way to connect with different places and run the perfect set up?

    Thank you, Joe

    Hello

    Maybe I can help my friend.
    I searched here in the forum for useful discussions and forum it here:
    http://forums.computers.Toshiba-Europe.com/forums//thread.jspa?MessageID=147434

    The user shaaaaan has reported this statement:
    To use smart Toshiba face recognition software:

    First of all,

    step 1. Although it cannot be configured or whatever it is, check the weather its already installed in your system, to do,

    1.a. open 'computer' from the 'Start' button
    1.b. Double click "C:" drive or every time your windows is installed, by default the C: drive.
    1.c. double-click "Program Files."
    1.d. double-click "TOSHIBA."
    1.e. weather check the folder named 'SmartFaceV' exists in this folder.
    1.f. If the file exists, this means that you have installed, s/w face recognition even if it is not configured to use, skip step 2 and GO to step 3.
    1.g. Else if the file did not exist, this means that the software is not installed, if it does GO to step 2.
    step 2. To install the software of face recognition

    2.a. open 'computer' from the 'Start' button
    2.b. Double click "C:" drive or every time your windows is installed, by default the C: drive.
    2.c. double-click "Toshiba."
    2.d. double-click "drivers."
    2.e. double-click "FaceRecognition.
    2.f. Double click on "setup" - one with an arrow going into an icon of sortoff loop.
    2.g. follow the procedure step by step for installation.

    step 3. To configure the software of face recognition

    3.a. open 'computer' from the 'Start' button
    3.b. Double click "C:" drive or every time your windows is installed, by default the C: drive.
    3.c. double-click "Program Files."
    3.d. double-click "TOSHIBA."
    3.e. double-click "SmartFaceV".
    3.f. double-click "SmartFaceVSettings".
    3.g. follow the prompts. A word of counsel is to ensure that your face is well lit when you use the software otherwise, you end up spending a day in front of the software trying to get it configures your face with the selected account.
    3.h. To sheck it simply lof out press the "Windows key" AND "key of L."
    3.i. Then you will see the normal login page, click on the "Other" credentials and on the next page, click on "Start Face Recognition" & "Smile" :))

    Check it!

  • Satellite L300-1DN - CPU which is compatible

    I HAVE A TOSHIBA SATELLITE L300-1DN THAT:

    CPU INTEL CORE DUO T3400 2.16 GHz
    3 GB RAM
    GPU INTEL GM4500M

    What is the processor MORE POWERFUL THAT CAN REPLACE? LIST OF THE CPU?
    HOW CAN I INSTALL THE MAXIMUM RAM?
    CAN I REPLACE WITH A GPU MORE POWERFUL? WHY IT RUNS at 400 MHZ GPU WHEN COULD GET to 640 MHz?

    SORRY FOR MY BAD ENGLIHS

    Hello

    In General, upgrading CPU on mobile computers is not supported. Toshiba has a very useful document and you can find it here.
    A more powerful processor means more heat and it can be risky for the material. Each laptop model has certain designed cooling system to maintain the optimal material temperature and protect from overheating. Because of all these aspects CPU upgrade could be quite risky.

    A long time ago I ve tested upgrade CPU on my old model P300. Believe me I didn t notice a performance boost. Not at all. Later I ve passed RAM to max level and exchanged the SSD HARD drive.
    It was the right decision and these updates is supported and without any risk.

    Satellite L300 is a quite old but still good machine for daily activity. My advice for you is to upgrade RAM and use SSDS. Of course install Win7 32 bit and, believe me, your machine will be very fast and you really happy with it.

  • Satellite L300-215 - Webcam not working not

    The webcam on my Satellite L300-215 did not work because I downloaded the new software of Toshiba months ago.
    The Chicony webcam is not yet recognized, and it will not install the Toshiba software.

    Two hours with Toshiba technical staff, including their having access remote to my computer, does not solve the problem.
    It seems that this is a very common problem and I tried some of the suggestions on the assignments, but without result.

    Anyone out there have the answer?

    I have two laptops Toshiba, Satellite P200D and Satellite A300, both with webcam and everything works fine. I agree therefore with statement on the very common problem.
    Webcam works well if your laptop is preinstalled with recovery image Toshiba (factory settings)?

    > I tried some of the suggestions on the assignments, but without result.
    What you have tried to solve this problem?

  • Satellite L300 - plugged, but not charging

    Hello world

    I have a Satellite L300 under Win 7 32 bit
    It does not load, so when the AC is removed it will stop.

    I tried the power cycle - unplug everything, hold the power button for 30 seconds.
    The contacts are clean on the s battery connections and I uninstalled via the control panel and scanned as new hardware.

    I checked all of the web, but nothing helped, please could you help?
    Don t want to buy a new battery for no reason

    Thanks Pindy92

    > Don t want to buy a new battery for no reason

    Well, in this case, you should visit one of the points of service and need to check the laptop with a new battery.
    If it s battery not deliver, then I guess that the problem is related to problems of motherboard, so that would be the worst case

    By the way: you are using the latest version of the BIOS on this laptop? Make sure that the latest version of the BIOS is installed. But if the BIOS is up to date, then a new battery should be tested.

  • Satellite L300-144 does not start

    Hello!

    My laptop Toshiba Satellite L300-144 arrested beginning after about 2 weeks of no use with the following sympthoms:
    -When DC cable is unplugged, none of its lights are turned on and pressing the button "power on" (and others) does nothing;
    -When DC cable is connected, 'DC IN' led is _blinking green_, led battery is _blinking orange_, others are turned off. by pressing the button "power on" (and others) does nothing.

    Waited for over an hour with DC cable connected try to charge the battery of the laptop without change.

    I have not found the meaning of this signal (DC IN green, battery flashes orange flashing) in my manual.

    What is this means problem with the battery of the laptop?

    How can I fix?

    Hello

    Flashing led DC-IN is not a good sign.
    Of my knowledge led begin to blink when a hardware error has been found.
    I'm not sure if this will help but try a short workaround:
    -remove the battery, disconnect the adapter
    -wait about an hour and then reconnect the two part.
    -try to turn on the laptop

    Check if it helps.
    But if this work around won t help you, then you would have no choice but to get in touch with ASP in your country.

    Sorry, but that's all I can suggest.

  • Satellite L300 - I can not install an update for Windows Vista

    I can not install an update to Windows Vista after you restore laptop (satellite L300) to factory settings. Tried to install with automatic updates and download of the update on your computer. What auto-update error: 8024 to 000.

    When you try to manually install SP1 getting error: 0800FFFF. I tried to disable the firewall, Defender and the UAC. Someone with such ideas?

    The Windows Update 8024 A 000 error Code means THE NOSERVICE WU E. This translates as UA was impossible for incoming calls to THE service.

    I would like for you to perform general troubleshooting steps for Windows Update.

    This diagnosis is generally applied to all Windows Update related issues.

    Stop Windows Update services *.
    1. click on start, click principally made programs, accessories, right-click on command prompt and select run as administrator.
    2. If you receive a user account control notification simply click on continue.
    3. at the command prompt, type the following commands and press ENTER after each command.
    net stop wuauserv
    net stop bits
    net stop cryptsvc
    4 Please, do not close the command prompt window.

    * Rename Windows Update records *.
    1. at the command prompt, type the following commands and press ENTER after each command:
    2 ren %systemroot%\System32\Catroot2 Catroot2.old
    3 ren %systemroot%\SoftwareDistribution SoftwareDistribution.old
    4 Please, do not close the command prompt window.

    Registration of DLL's on Windows Update *.
    1. Please copy and paste the following text in a new Notepad document and save the file as WindowsUpdate.BAT
    2 if it is registered correctly the icon will go from a Notepad file in .BAT file which has two blue toothed wheels as its icon.

    Restarting Windows Update services *.
    1. click on start, click principally made programs, accessories, right-click on command prompt and select run as administrator.
    2. If you receive a user account control notification simply click on continue.
    3. at the command prompt, type the following commands and press ENTER after each command.
    net start wuauserv
    net start bits
    net start cryptsvc
    output
    4 now, please check the updates via Windows Update to determine if the problem has been resolved.

  • Re: Satellite L300 - camera does not work after upgrade to Win7

    As in the subject. Camera does not work after the upgrade to Windows 7. I have tried almost everything found on the Internet. The drivers are installed.

    There is no exclamation point in the system.

    Satellite L300 (PSLB8E)

    Hello

    What happens when you start the webcam app?
    All programs-> Toshiba-> webcam

    Did you install other 3rd software part as for example the Skype that could access the webcam?

    Extra tip: go to BIOS and set it to default, save changes, and then restart the laptop.
    Start Skype for example, check the settings in Skype webcam chose correctly.

    It would be really interesting to know if the other software would be able to use the webcam.

    By the way: have you installed Toshiba face recognition? This software use and access the webcam as well
    Then sometimes it would be possible that this software could block the webcam and webcam tool could not work

  • Satellite L300 laptop will not load Windows

    I have a model of Satellite L300 number PSLB0A - 00L 022 running windows Vista.

    The problem is that it does not load Windows. It starts ok and I can access the boot manager and the Setup utility and that's it. It stops just loading.
    After studying the problem, I ran a car aptitude test and the result was the error code 0 x 70. After looking at the code I m under the impression that I need to erase the disc. I have no problem with that.

    My question is - if I run the windows Recovery Wizard will be it solve my problem? I will have to re install vista at all? All advice is appreciated!

    Hello Jane and welcome in the Toshiba forum

    After reading your ad, I must say that the best solution and easier for you is to reinstall the operating system via original Toshiba recovery DVD. This DVD contains the operating system, all necessary drivers, specific Toshiba and utility tools. After recovery image installation you will get state out-of-box and clean the preinstalled operating system.

    Yes, this should solve your problem. Please note: when you do it all saved data will be deleted.

    You have some important data saved on your laptop?
    Do not use this disc reinstall Vista and everything should be ok again.

  • Satellite L300 - 16L will not start

    Hello

    I hope someone can help me thanks.

    I have a Toshiba Satellite L300 - 16L that has suddenly refused to start. When I turn on my laptop, the screen stays black for centuries, and then a message from the Windows Boot Manager appears, saying:

    "Unable to start Windows. A recent hardware or software change might be the cause. To solve the problem:

    1. Insert your Windows installation disc and restart your computer.
    2. choose your language settings, and then click "next".
    3. click on "Repair your computer."

    If you do not have the disk, contact your system administrator or computer manufacturer for assistance.

    File: \Windows\system32\winload.exe

    Status: 0xc000000f

    "Info: the input of the system could not be loaded because the application is missing or damaged.

    The problem is, I don't remember if I provided with the installation disk and I was unable to find it. I was told that I could buy one, but it is very clear on the website how much it will cost. It feels strange to implement credit card details before you know what the price will be.

    Can someone please advise what I should do to fix the above problem and how the costs of the installation (about at least) disc. Also, how long is the delivery of the new installation disc cost? If someone could set up a direct link where the disc can be purchased, it would be great.

    Thank you very much in advance for your help.

    Hello

    According to published information, boot.exe or smth like that Windows is corrupt.

    > Can advise someone please what I should do to fix the above problem and how the costs of the installation (about at least) disc. Also, how long is the delivery of the new
    > cost of installation disc?

    In your place, I would order a [Recovery disk | https://backupmedia.toshiba.eu/landing.aspx] Toshiba because it is cheaper and contains all the drivers/utilities that get Windows copy disk. I have never ordered from toshiba, but as I know that 2 weeks delivery and about 35 euros. Of course, you can get friends borow windows disk and try to repair or install windows

    All drivers are:

    http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp

Maybe you are looking for

  • Netflix content error

    Netflix has worked for months, but for about a week, I don't see is a content error when you try to play a movie. I can see the movie titles in the instant queue and netflix work well on all other devices in our home. Model is BRAVIA KDL-46EX710, ser

  • Photos using the incorrect sort order

    The App 'Photos' sort my photos wrong. SCREENSHOT 01 SCREENSHOT 02 The date and time are correct, but the application sorts badly. The video with the bird (capture SCREEN 01) must be below the image with the people (02 SCREEN capture), because I took

  • HP laptop 15 15-g004np

    Hi all For the first... my name is Mihai and I have a problem with a laptop, which is not old have 2 or 3 months when I buyed and I do not have access to Wi - fi do not show me anything... When I press the button is to go on and affter 2-3 sec fade..

  • Wireless DHCP problem

    Hello I have a problem We have cisco ap 500 series, it was light, but we have migrated to standalone, now, the scheme is simple. We have a 2811 router and dhcp created on this subject, we also f0/0.30 virtual interface with the ip address of 10.10.30

  • XY coordinates and colour ref

    HelloFirst of all, I want to say that I am not a TI, so I just try to do my best.I'm working on a script to get a document from .csv with the RGB/CMYK color information and the XY coordinates for this color to update in a BBDD.I have a problem, I fou