Satellite L300-1FS - Wireless reconnect after closing the lid

Similar Questions

• Satellite L500 - external screen display after closing the lid?

  Hello
  I use the Satellite L500 - 120 Notebook, and before installing Windows 7, the laptop has a function very uncomfortable, when I applied an external display.
  When I closed the lid of my laptop, Office was shown on my display (with the native resolution of the external display) external, so I had not to
  change anything on the control panel. In Windows 7, Miss me this feature. I already tried to use the Control Panel, but there is no parameters, which fits
  with the previous ones. I can duplicate the screen in order to see my desktop screen on my external screen, but with the resolution of 1366 x 768 laptop.
  If I extend the views, then there is only the background image to the external screen, but this time with the native resolution.

  So my question is, how to conifgure Windows to recognize that I closed the lid, and the screen should be shown on my external screen?
  Or should I install applications Toshiba, that I had before, who visited account this function?

  Thanks for any help!

  Hello

  I m not a Windows 7 user because I want to wait until it will be released official, but I hope that I can help you a bit:

  First of all in power management, you can choose the action that happens if you close the lid (g. e. sleep, close, etc.). This action must be disabled because otherwise the laptop shuts down or something else.

  So I think that you need to install the display driver for your laptop. You can try the Vista driver because most of them are working on Windows 7.
  Then you should be able to define the correct screen resolution for external monitor.

  A working display driver is important to the clone or extends monitors to verify this!

• Satellite L10-232: black screen after closing the lid.

  Hello

  I moved my laptop (satellite L10-232) in another room, it wasn't stop (just closed it). When I opened it there was nothing on the screen and the battery is not empty (processor still does some things). Anyone know how I can fix this problem?

  Thank you

  Easy...
  PowerManagement is weaker and less stable features on any laptop. (especially with the defective batteries).
  NEVER try to count on the home screen etc. It will work time 999 and 1000 it don't.
  Now, you're done with a laptop computer hanging.
  The ways:
  1. the easy way:
  -push the power button and keep your finger on it for 10 seconds. (5 is enough, 10 to be sure)
  -remove the battery
  -plugin powercable
  -push the powerbutton

  2. the less gentle way:
  -remove the power cable
  -Remove the battery
  -wait 24 hours
  -Insert the power cable
  -push the power button

  3. the hard way: make sure THAT YOUR HARD DISK IS NOT PASSWORD PROTECTED, to OTHER YOU LOOSE YOUR DATA.
  trying to understand hat is the startup key sequence to reset the BIOS at startup. (it should be described in your manual somewhere)

  4. the hardest way:! ONLY BY A PROFESSIONAL!
  IF MAKE SURE THAT YOUR DISK IS NOT PROTECTED BY WORD, OTHERWISE YOU LOSE YOUR DATA.
  The laptop must be open and all batteries must be removed. All the capacitors must be emptied (leaving a laptop without the battery for 72 h). Then turn on
  the laptop.

  Please note that I can't be held responsible for any damage or loss of data under any circumstances.

• I am expierencing problems with my isight Camera on my MacBook Pro. Suddenly the video camera does not start (no green light on) FT or Photo Booth. The screen is black, if I restart computer it works but after closing the lid, it stops. V10.11.3

  I have problems with my view i camera on my Mac Book Pro. Suddenly the video camera does not work (no green light on) FT or Photo Booth. The screen is black, if I restart it, it works but after closing the lid it stops and I have to restart the computer.  I use V10.11.3. An idea about what is happening

  Hello mpm068,

  Thank you for using communities of Apple Support.

  Since your iSight webcam works up to the time that your Mac goes to sleep, I would like you to start please help desk trying to replicate this problem then to reboot in safe mode:

  1. Choose the Apple menu > shut down.

  2. After your Mac stops, wait 10 seconds, then press the power button.

  3. As soon as you hear the startup tone, hold down the SHIFT key.

     You must press the SHIFT key as soon as possible once you hear the startup tone, but not before.

  4. Release the SHIFT key when you see the gray Apple logo and progress indicator.

  To exit safe mode, restart your Mac, but no press during the startup.

  OS X El Capitan: start in safe mode

  Take care.

• Tecra M7: Tablet does not work after closing the lid

  Someone had problems with the Tablet does not work after closing the lid on a Tecra M7? BIOS is 3.20

  Does not happen on hibernate or sleep.
  I have the set cover to do nothing on close.

  Hello

  What do you with Tablet does not work after closing the lid?
  Is - what the laptop freezes or what? What happens exactly?

  Closing the parameters adjustable lid to Hibernate or standby mode or no action.
  These settings can be defined in configuration power saver actions.

  If you have some problems with some Toshiba applications installed, I recommend you to reinstall the program and TOSHIBA common Modules that doesn t work properly!

  Best regards

• Restart the problem after closing the lid of the laptop for a few minutes

  I use Windows 7 Home Premium on my Asus A53S. I have reboot issues a few minutes after closing the computer laptop lid eventhough I put what to do after closing the lid to "do nothing" for both on battery and the plug. And it will keep restarting over and over again. Rest

  Hi DennisHii,

  You did changes to the computer before the show?

  Method 1
  I suggest you perform the clean boot and check if the problem persists.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: Follow step 3 of section of boot KB929135 to reset the computer in normal mode.

  Method 2
  I suggest you try the steps from the following link:

  Windows 7 is not going to sleep
  http://support.Microsoft.com/kb/976877

  Hope this information is helpful and let us know if you need more assistance. We will be happy to help.

• Equium A60-692 restarts after closing the lid

  More annoying, the only thing I can do is hold the power button to turn off & on again. Is there a key combination should I put pressure to bring its edge form after you have closed the lid, or is it a fault?

  Thank you

  Usually when the size of the memory changes, the system can recover.

  Remove the battery and the AC adapter / CC, and then remove one of the memory Modules and power on.

• Tecra 9100: Sleep Mode is no longer enabled after closing the lid

  Hello

  First post here and not the smartest when it comes to computer skills...

  Have a Tecra 9100 about 4 years old, under XP Pro SP2.

  last 3 days whenever I close the lid of the laptop it won't STAND BY mode me leaving no option but to propel to the top and I get "SUMMARY FAILURE PRESS ANY KEY."... »

  I changed any settings whatsover and since then, I tried to access the Power Saver icon in Control Panel, but when I click on it nothing happens. I then click on a few of the Control Panel Power Options and I get the message "...". "a Microsoft power options and use the Toshiba power Saver saver" which obviously I can't access either!

  Is there any reason why closing the lid of my laptop is no longer 'Stand by' mode, basically going in OFF format only, it became a major drawback and don't know where to turn to.

  Any help or advice would be greatly appreciated.
  Thanks in advance.

  Hello

  Reading your post I guess windows on own power options and doesn t use Toshiba power saver power profiles.

  Generally, the issue should be resolved by switch again to the Toshiba power saver in the-> power options control panel! But your announcement about turning the power on, it is not possible! It s very strange?  :|

  In this case, I recommend to remove the Toshiba installation energy saver. This can be done in the Add & Remove programs.

  So finally, check out the following steps:
  Remove the energy saver, restart the laptop, reinstall the Toshiba Common modules, reboot the laptop and install again the energy saver.

  After this procedure, the splash screen should work! By the way; the hibernation mode is disabled by default. If you want to use the Hibernate mode, you will need to enable it first!

• Windows error recovery received CONSTANTLY after closing the lid

  I did a factory reset using the recovery a month ago discs.  When I was using the system at this time as I closed the lid.  When I came back to it at a later date, I opened the lid and noticed that it was not on.  I pressed the power button and received the following message is displayed:

  Windows error recovery

  Windows is not shut down successfully.  If it was because of the system does not, or if the system was stopped down to protect data, you might be ale to recover by choosing one of the Safe Mode configurations from the menu below:

  (Use the arrows to select your choice.)

  Safe mode
  Safe mode with networking
  Safe mode with command prompt

  Start Windows normally

  What is the problem and how can I fix this so it doesn't happen or is this normal with Vista.

  Hi SouthernDixieCowgirl,

  This would happen if the driver graphics card on the computer is damaged or needs to be updated.

  You will need to update the drivers to display on the computer card by visiting the manufacturer of the card or the computer manufacturer's website and check if it works.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

   

  Also, make sure that you install drivers chipset update by contacting the manufacturer of the computer.

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Satellite L300 does ' t run after updating the BIOS of V2.10 to V2.20

  Hello

  I just installed BIOS V2.20 on Bios V2.10 for my Satellite L300 Toshi on Windows XP.
  Afterwerwards the Machine starts and displays just the XP from window and restart I save the options normal reboot or restatr.

  Nothing works anymore? Even from Windows CD has no effect.
  Who can help?

  Hello

  Go into the BIOS (press F2 by turning on the device) and set the BIOS to default settings.
  Save the changes and try to start the laptop again.

• Qosmio G20-127: failure to screen after closing the lid on Vista

  Hello

  I have a Qosmio G20-127 and I recently installed Vista Ultimate (32 bit). I managed to put everything in its place (except the magic buttons, but the drivers are not on yet), but I have a problem that makes me seriously reconsider coming back to XP MCE.

  When I close the lid of my computer, the screen turns off of course, but when I open again, it does not turn, but it stays black. And I can't turn it on again no matter what. I have to turn off the entire computer and it is quite unrealistic.

  Funny is that after a restart for about 20-30 minutes, I can open and close the lid normally, but the same problem occurs after a bit more time to work on the computer.
  The problem persists even though I disabled everything remotely connected to the closing of the cover.

  Does anyone have a solution?

  Hello English

  Try you update the BIOS on the VISTA OS?

  I can imagine you will always find something new and unusual, but please note that Vista is not supported by the OS for Qosmio G20 (Vista drivers are not available on the Toshiba download page) and you can expect that from time to time, you will discover new disturbing behavior.

  I recommend you to install and configure Vista as described in the topic of s Francisco, configure OS for your needs, and be happy if you use Vista without any serious problems. In my opinion, for OS installation and configuration software Qosmio is Toshiba laptop more complicated template, and you will never be able to configure it as a supported and preinstalled WXP MCE. Commands supported are tested and bugs are fixed, but not with Vista on Qosmio G20.

  Sorry my friend. Sounds stupid, but maybe that's just the truth. By the way: I like Qosmio G20. Maybe I'll buy one if the price is Ok.

  Good bye

• No battery indicator and the laptop does not shut down after closing the lid

  After returning from my lapyop return to caused by a virus factory settings I can't have my defiler of battery on my taskbar

  and also I got my lap top programmed to close on the cover but can't find where to put in place

  Hello

  I suggest you to visit the web link below to change the change the power button cover option.

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-what-happens-when-you-close-your-mobile-PC-lid

  Once you have visited the link above, try the method to display the power plan options and then search forcover and the power button and choose your preferred option.

  Hope the helps of information. Please post back and we do know.

• Satellite C855-1CH - cannot control the brightness after closing / opening lid

  Hello

  I have a problem with windows 7 64 and amd 7610 m driver, when I installed the driver from toshiba site, have problem with hibernate.

  When I closed the lid and unplugged AC adapter / CC, and after a few minutes/hours, I turn on the computer the light are the same (my brightness with battery equals 30% and 100% of turnover) and cannot be modified with the function keys and power option did monitor brightness, but I only reboot the system, the back,.

  How to solve this problem?

  I'm trying to install the driver of the 7600/7500 AMD and battery time passed quickly with down in brightness in 1.5/2 hours (with 7610 m 2.5/3) and fan work card strong mother, while I use in solitaire.

  Thanks for the help!

  If someone can help me, contact me.

  > When I closed the lid

  The laptop goes into hibernation or standby mode once the lid has been closed or just the screen turns off?

  I'm not quite sure if its really a problem of display driver.
  Other FN keys work correctly?

  It seems that the C855-1CH Satellite was sold without any preinstalled system and looks that you have installed the Win 7 64 bit in your own hand.
  Were all Win 7 drivers as properly installed VAP?

  What is the BIOS? Is up to date? If this is not the case, try to update.

• Satellite L300 - will not start after the installation of Skype

  My Toshiba Satellite L300 won't start after installing Skype.
  This happened to someone else, and can I do?

  Thank you.

  I think Skype is probably the most used messenger and ideal application for communication.
  It is professionally designed and programmed. As you know in recent years, it has been offered in many different versions and it is always better and better.

  So I think that Skype itself is probably not the problem. I know that a lot of people also use Skype and I've never heard problem described.

  Anyway, what you can try is to remove Skype and try to install it again. Try also push the BONES at that earlier time. Maybe some Microsoft updates are responsible for the stability of the software.
  It's really not easy to say what the problem is here.

• Satellite U400 doesn't wake up after that I closed the lid

  When I want to do something like go out then I close the lid and then I can't get the laptop to wake up again, I have tried a few things but nothing doesn't seem to work.

  I na? t use Toshiba Power Save, I use the normal XP usual energy and I even tried with Toshiba Power saver, but not the software from start > Control Panel > but still the laptop not wakes up after I closed the lid.

  Anyone who can help me with this problem?

  thnx.

  Here's the good news, but could you please post a short instruction how you solved this? I think it would be interesting for other users here in the forum!